Used Profile Wrapping Machine for sale (67,535)

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Djdpfxjtqfqxs Ak Aecp

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 6,4m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Dodpfx Akey Aafxs Aocp

Condition: used, Year of construction: 2019, - 6 working spindles - max. working width 250 mm - feed rate 6 - 24 m/min used planing and profiling machine Manufacturer: HOMAG Type: Optimat LPP306 Year of construction: 2019 OPTIMAT LPP306 Planing and profiling machine with 6 working spindles. Workpiece width after processing: - min. 10 mm - max. 250 mm Workpiece height after processing: - min. 10 mm - max. 160 mm Control system: - PowerControl with powerTouch LPP300 Infeed table 2,500 mm Feed rate min. 6 m/min max. 24 m/min FIRST LOWER SPINDLE: - Spindle motor power 7.5 kW - Siemens IE3 energy-saving motor Power speed range: - 7.5 kW - 6,000 rpm Spindle diameter 40 mm Spindle length 281 mm FIRST RIGHT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 176 mm FIRST LEFT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length: 176 mm Total length: 176 mm FIRST UPPER SPINDLE: - Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm SECOND UPPER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Dedpfx Aozuzf Uok Ascp SECOND LOWER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable Dsdpfx Akegh T Iae Aocp - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 820x1150x1580 mm Weight 450 kg Dcodpfxsvz Htze Ak Aep Total power requirement 2,2 kw

Condition: used, Year of construction: 1991, Used machine Used profile sanding machine of the company Arminius type ST 10 Dcedpfx Asw I Unkjk Ajp Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Location: Röllbach

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min Dodpfx Akjz Indus Aecp F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: new, Year of construction: 2024, functionality: fully functional, RÖDER Profile Drilling Machine PBA 3000 NC with 2-axis positioning control Heidenhain Positip 8016 active for x- and y-axis and drilling unit Optimum MH35V Year of manufacture: 2024 For rational and efficient drilling of beams, profiles, tubes, and other long workpieces Dedpfxox E Syts Ak Aecp Technical Data: Max. travel distance x-axis: 3000 mm Max. travel distance y-axis: 250 mm Max. travel distance z-axis: 350 mm Max. support length: 5700 mm (by means of extendable support rollers) Max. support weight: 500 kg Standard Equipment: 3 pcs. mechanical vices Röhm BOF 4 Max. clamping width: 220 mm Clamping width: 160 mm Jaw height: 50 mm Drilling unit Optimum MH35V Technical Data: Motor: 1.5 kW, 400 V Drilling capacity in S235JR: ø 32 mm Continuous drilling capacity in S235JR: ø 28 mm Tapping mode: Yes Spindle taper: BT 30 Spindle stroke: 90 mm Gearbox: Two-stage industrial motor and additionally 6 gearbox speeds Speed range: 220 – 3100 rpm Gear head: swivels +/- 30° Minimum quantity lubrication equipped with micro-dosing pump, pneumatic frequency generator, 6 mm push-in fitting for pressure supply/device control; 75-litre PE fluid tank, nozzle feed line D8 mm, length 2000 mm, plastic link nozzle G1/8" with holder D12 x 30 mm, nozzle tip made from aluminium Optional, available at extra cost: Pneumatic tapping unit M3 – M12; integrated on PBA 3000/6000, pneumatic, with flexible arm, Speed 400 rpm Working area: Radius 100–950 mm, 6 pcs. quick-change inserts M4, 5, 6, 8, 10, 12; including linear guide, adapter, pneumatic connection and maintenance unit Subject to prior sale. No liability for typographical errors and mistakes.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube and Profile Laser System – Precision Meets Performance The ACME tube and profile laser system represents maximum efficiency and flexibility for modern tube and profile machining. Equipped with four high-precision chucks, vertically positioned guides, and three movable clamping systems, it ensures stable and precise processing of a variety of workpieces. The system is available with multiple machining diameters (Ø 280 mm, 360 mm, 550 mm, 640 mm, and 800 mm), providing maximum adaptability to diverse production requirements. With selectable laser powers of 3 kW, 6 kW, 12 kW, and up to 20 kW as well as a processing length of up to 12 meters, this machine meets the highest industrial demands. Dedey Ix E Iopfx Ak Ascp High-quality components from renowned manufacturers guarantee durability and process reliability. Of course, the system is CE-compliant and meets all common safety standards. Efficient production workflows are ensured by semi-automatic loading and unloading, complemented by an integrated small parts conveyor belt. The innovative 45° laser head also enables precise cuts even for complex geometries. ACME – Your solution for high-performance tube and profile laser processing at the highest level.

Condition: used, Stedler SAM-BA-MAT E 500 Shrink wrapping machine AM-BA-MAT E 500 Shrink packaging machine Functional description The machine is used for individual or collective wrapping of packages with polyethylene shrink film. * Operating principle: Semi-automatic and pneumatic. Dcjdpfx Ajtzbkkok Aep * Process: The product is manually fed via a size adjustment slide; all subsequent steps (banding, further transport to the shrink tunnel) are carried out automatically. * Sealing process: A continuously heated safety sealing unit separates and seals the film. A Teflon cloth prevents the film from sticking to the sealing blade. Film roll placement * Positioning: The rolls are placed on pairs of support rollers at the top and bottom. * Adjustment: Adjustment rings limit the film laterally with a clearance of approximately 1–2 mm (adjustment is made using an Allen key). * Preparation: The film ends are guided through the sealing unit. By moving the infeed carriage back and forth once, the separating sealing process is pneumatically initiated, creating the so-called film curtain. * Film material: Processes two rolls of flat shrink film made of polyethylene. * Film thickness: The recommended standard thickness is 40 µm (micrometers). * Film alignment: The rolls are fixed with adjustment rings, allowing for a lateral clearance of 1–2 mm. * Film width: The maximum width is 210 mm. * Control: The machine operates pneumatically and is activated via a manual infeed slide. Machine data Manufacturer: Stedler Type: SAM-BA-MAT E 500 Operating voltage: 230 V Connected load: 0.75 kW Operating principle: Semi-automatic and pneumatic [Image content] Dimensions (L x W x H): 1500 x 1170 x 1300 mm Year of construction: 2004 Sealing & film specifications Maximum temperature: 250 °C Sealing readiness: approx. 1.5 s Film material: Flat shrink film made of polyethylene (PE) [Image content] Film width: up to 210 mm Film thickness: 40 µm (micrometers) More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: new, shaft diameter: 60 mm, – Shaft diameter 60 mm – The lower two rollers are hydraulically adjusted – Usable in horizontal/vertical position – Three driven rolls – NC control (7-inch touchscreen) – 2 speeds – Brake motor – Overload protection system – Roller diameter Ø177 mm Dodpfx Aksyh R Has Aecp – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2026, - Minor transport damage (small dent on the control cabinet, see photo) Dcjdpfxez Aiutj Ak Asp - Shaft diameter: 60 mm - The two lower rollers are adjusted hydraulically - Three rollers are driven - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Condition: like new (used), Year of construction: 2021, functionality: fully functional, SEMI-AUTOMATIC TURNTABLE, FOR PALLET WRAPPING WITH STRETCH FILM Upward-downward carriage speed Top and bottom reinforcement wraps Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Upward-downward cycle Only upward cycle Manual cycle Self learning cycle Altimeter and photocell delay 6 recordable programs Dcjdpfx Aexwa Sfjk Aop N-Connect: remote wifi connection for machine total control

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Dcjdpfx Aeuz If Nok Asp Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: N3.610, Available: immediately Dcedpfx Aswiffwjk Aep

Year of construction: 2009, operating hours: 11,720 h, condition: used, functionality: fully functional, machine/vehicle number: 2008/065, 1 thread grinding support, 1 water groove support, 7 face grinding supports, 3 upper chamfers, 3 lower chamfers, table extension console, belt running direction from right to left. Dodpfxsw Exx Ao Ak Ascp

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, bending force (max.): 42 t, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending force: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Ram stroke: 300 mm Dcsdpfx Asz Nipcjk Ajp Ram width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions and weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Unladen weight: 1,000 kg EQUIPMENT Documentation CE marking

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Djdpfx Ajxfl Izok Aecp Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: good (used), Profile roof tiles Entry width 1250 mm Material thickness 0.5 - 0.75 mm Year of manufacture 2002 Speed 8 m/sec. Dcedpexam Rajfx Ak Asp

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Dcedpovugv Aofx Ak Aep Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Ø 48.3 mm Ø 70 mm Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg

Condition: excellent (used), Year of construction: 1998, control type: CNC control, controller model: SIEMENS TOUCH, number of rollers: 3, overall weight: 15,000 kg, total length: 2,600 mm, total width: 2,200 mm, total height: 2,300 mm, Profile bending machine FACCIN - RCMI 180 MACH-ID 9828 Make: FACCIN Type: RCMI 180 Control: SIEMENS TOUCH YOP: 1998 Power 30 kw Hydraulic side supports 3 roll driven  Touchscreen SIEMENS Panel with S7 SPS  Laser measuring device for Radius  Set Universal rolls hardned Set Tool points  Horizontal and vertical:Horizontal Shaft Ø: 190mm Number of rolls: 3 Stroke X-Axis: 500mm Resistance moment: 360CM³ Working speed: 2000 - 5000mm/min. Length: 2600mm Width: 2200mm Height: 2300mm Weight: 15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dsdpfx Akez Iwy So Ascp

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: N3.610, Manufacturer / Origin: SMB / Germany ( EU) Dedpfx Aowifc Aek Aocp

Condition: used, functionality: fully functional, USED PROFILE BENDING ROLL BENDER - SOMO SHAFTS UP TO 105mm. WEIGHT 5000 KG. Dsdezh D T Iopfx Ak Ascp

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Maximum performance for modern tube and profile processing The ACME tube and profile laser system was developed for the highest demands in industrial manufacturing and combines precision, productivity, and flexibility at the highest level. Thanks to its powerful design and intelligent automation, it is ideally suited for steel construction, mechanical engineering, plant engineering, metal processing, and demanding job-shop operations. The innovative machine concept with four high-precision chucks, three movable clamping systems, and vertically arranged guides ensures exceptionally stable workpiece guidance. This allows even long, heavy, or complex tube and profile geometries to be processed with the highest accuracy. The system is available in various versions for tube diameters of Ø 280 mm, Ø 360 mm, Ø 550 mm, Ø 640 mm, and Ø 800 mm and can be optimally adapted to individual production requirements. With available laser powers from 3 kW to 20 kW and processing lengths of up to 12 meters, the ACME tube laser system offers maximum performance reserves for a wide range of applications – from thin-walled profiles to heavy structural tubes. Your advantages at a glance ✔ Four high-precision chucks for maximum processing accuracy ✔ Three movable clamping systems for optimal workpiece guidance ✔ Vertical guide structure for maximum stability and dynamics ✔ Tube diameters up to Ø 800 mm available ✔ Processing lengths up to 12,000 mm ✔ Laser powers of 3 kW, 6 kW, 12 kW and up to 20 kW ✔ Innovative 45° laser head for weld preparation and complex contours ✔ Semi-automatic loading and unloading for efficient production processes ✔ Integrated small parts conveyor for automatic parts removal ✔ High process reliability thanks to high-quality brand-name components ✔ Full CE compliance according to European safety standards ✔ German-speaking service and professional online support Technical highlights Powerful tube processing Tube diameter: Ø 280 mm to Ø 800 mm Processing length: up to 12,000 mm Four-chuck technology Remainder optimization through intelligent clamping technology High dynamics with maximum positioning accuracy Advanced cutting technology Laser powers from 3 kW to 20 kW Precise contour and miter cuts 45° laser head for weld preparation Optimal cut quality for a wide range of materials Automation for maximum productivity Semi-automatic loading and unloading system Automatic small parts disposal via conveyor Reduced downtime Higher output with less personnel Typical application areas Steel and hall construction Mechanical and plant engineering Metal and tube processing Vehicle and commercial vehicle construction Agricultural technology Facade and railing construction Furniture and profile manufacturing Job-shop operations Quality and safety The ACME tube and profile laser system meets all relevant European safety requirements and is delivered CE-compliant. High-quality components from leading manufacturers ensure a long service life, high availability, and maximum investment security. ACME tube and profile laser system More performance. More precision. More possibilities. Dcedpfxezb Irpe Ak Asp The intelligent solution for economical and highly productive tube and profile processing in modern manufacturing.

Condition: used, Year of construction: 2006, Technical data: Working ranges: Dedjxzq I Sepfx Ak Aocp X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Water treatment system available at additional cost