Used Programming Instructions for sale (6,283)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total height: 2,020 mm, total width: 960 mm, total length: 1,350 mm, pressing force: 50 t, table width: 450 mm, table length: 450 mm, operating speed: 30 mm/s, reverse speed: 42 mm/s, pressing speed: 6 mm/s, This press has been specially designed for bending, embossing, forming, punching, assembly, and deep drawing operations. Force options are available in variants from 50 to 150 tons. Model: CD-50/NC Force: 50 T Motor power: 4 kW Ram stroke: 250 mm Working speed: 6.3 mm/sec Approach speed: 30 mm/sec Return speed: 42 mm/sec Maximum pressure: 320 Piston stroke: 250 Lower table: 450×450 mm Ram with anti-rotation device Open height: 400 mm Weight: 1,480 kg CYLINDER AND HYDRAULICS: The double-acting cylinder is equipped with a guide bush, a hard-chromed piston rod, and wear-free guide elements. To prevent wear on the piston rod, the presses are fitted with a removable and replaceable pressure plate. Tools can be mounted in place of the pressure plate. An anti-rotation device is fitted to the cylinder by means of a clamp and guide rod. The hydraulic unit features two speeds and is equipped with automatic high-speed shutoff. A decompression valve for the cylinder is also included in the delivery. ELECTRICS AND SAFETY: A SIEMENS SIMATIC S7 1200 safety PLC and an MTP-400 4-inch touchscreen (positioned above the electric foot pedal) are integrated as standard. These allow programming of the operation mode (semi-automatic or automatic), force, stroke, and dwell time of the upper cylinder. The system offers storage for up to 99 programs, with each allowing configuration of all previous parameters. The control cabinet includes a switch for selecting the desired operation mode (manual or automatic) and a key switch for maintenance work. The electrical and hydraulic controls are designed to be redundant and self-monitoring. The hydraulic safety block is equipped with electrically monitored valves for the required safety. Hsdpfswlgciex Agloh Operation is via a Category IV safety two-hand control button. For maximum safety, fixed side guards with a front opening of 650 mm are installed. A hydraulic cushion or hydraulic ejector can be optionally installed. The machines are supplied complete with operating instructions. The presses in the CD series meet all essential safety requirements and criteria in accordance with CE regulations.

Condition: used, Year of construction: 2024, functionality: fully functional, total height: 2,675 mm, table height: 900 mm, total width: 1,075 mm, total length: 1,525 mm, pressing force: 100 t, table width: 700 mm, table length: 500 mm, overall weight: 2,540 kg, reverse speed: 60 mm/s, distance between side stands: 800 mm, stroke length: 250 mm, Equipment: safety light barrier, RIGID FRAME HYDRAULIC PRESSES We have engineered the motorized rigid frame hydraulic presses of the R/NC series in six different capacities ranging from 80 to 500 tons. Specially designed for stamping, die-cutting, and drawing operations. The latest generation R series hydraulic presses have evolved into highly versatile machines, including the capability to integrate seamlessly into automatic production lines. They operate at a hydraulic pressure below 320 BAR to ensure maximum durability of the entire hydraulic system. The R/NC series drawing and stamping presses feature an electro-welded frame made exclusively from S355JR steel, stabilized and precision-machined after welding for perfect parallelism and accuracy. The frame design and strength are optimized using finite element analysis software, ensuring our high standards of precision and quality are always maintained. Both the upper and lower tables are made from precision-machined C45E steel and feature DIN-650 T-slots. The upper table maintains perfect parallelism by means of four lateral cylindrical guides with maintenance-free, anti-friction bimetallic bushings. The double-acting cylinder features a lapped barrel, a chrome-plated piston, and maintenance-free wear guides. The hydraulic unit is motorized, offering two speeds with automatic disengagement of the rapid speed, and includes a cylinder decompression valve. Standard features include a SIEMENS SIMATIC S7 1200 safety PLC and a 4” MTP-400 touchscreen positioned above the electric foot pedal control. This setup allows for programming of semi-automatic and automatic operating modes, power, stroke, and dwell time of the upper cylinder. Up to 99 recipes can be stored, with full parameter settings for each recipe. The electrical control panel includes a selector switch for manual/automatic operation, and a key switch for maintenance tasks. All electric and hydraulic controls are redundant and self-monitored, with an additional safety block and safety self-monitoring features. The machine includes verification and certification of correct operation, as well as the safety distance of the light curtains. Safety features include type 4 PLe photoelectric light curtains at the front working area, two fixed side guards, and a rear access guard equipped with a magnetic disconnect sensor, polycarbonate windows, and LED interior lighting. Installation of a hydraulic cushion or ejector is supported. Compliant with all essential CE safety and health requirements. Supplied with an instruction manual. Technical Specifications: - Force: 100 t - Motor power: 13 kW - Working speed: 3–9 mm/s - Approach speed: 40 mm/s - Return speed: 60 mm/s - Maximum pressure: 319 bar (up to 320 bar) - Ram stroke: 250 mm - Guide diameter: 50 mm Hsdpfx Aewlgkmegljh - Lower table: 700×500 mm - Upper table: 600×450 mm - Max. vertical opening: 500 mm - Front opening: 800 mm - Working height: 900 mm - Overall front width: 1,525 mm - Overall length: 1,075 mm - Overall height: 2,675 mm - Weight: 2,540 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: FI-50-RAY-OF, shaft length: 200 mm, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, working range: 200 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available immediately! Buy now and benefit! Seize the opportunity and secure the 50 Watt Raycus QB. For further information or an individual offer, please do not hesitate to contact us. Contact us today and find out more about the benefits of this outstanding product. We offer you a brand new 50 watt Raycus fiber laser with German user software and operating instructions. This device is very easy to operate without any programming knowledge and is ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 50 Watt Raycus Wavelength: 1064 nm Marking field size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: simple preview Laser class: 4 Working temperature range: 14-30 ℃ Focusing: manual Max. Component height: approx. 350 mm Connection: 230V Cooling: air-cooled Weight: approx. 50 kg Operating costs: low Service life: over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 200x200 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Applications: Perfectly suited for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. This laser is ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: Hjdpfxsu Hrf De Agljh We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions.

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, machine/vehicle number: FI-30-MAX-OF, shaft length: 110 mm, input voltage: 230 V, type of input current: DC, laser power: 30 W, type of cooling: air, working range: 110 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available for immediate delivery! Demonstration unit! Buy now and benefit! Seize this opportunity and secure the 50-watt demonstration unit – used for a maximum of 3 hours, in mint condition! We are happy to assist you for further information or a customized quote. Contact us today to learn more about the benefits of this outstanding product. We offer a 30-watt fiber laser with German user software and an instruction manual. This device is very easy to use and ready to use without any programming knowledge. ✅ Only used for a maximum of 3 hours – top condition! ✅ 3-year warranty and support included! Our services: Personal delivery and installation Setup and training on-site or remotely Continuous support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 30 watts Wavelength: 1064 nm Marking field size: 200 x 200 mm (Options: 50, 70, 110, 150, 250, 300 mm head) Repeatability: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German/English Pilot laser: simple preview Laser class: 4 Operating temperature range: 14-30 °C Focusing: manual Max. component height: approx. 350 mm Connection: 230V Cooling: Air-cooled Weight: approx. 50 kg Operating costs: Low Hodpfx Aewchywogleh Service life: Over 100,000 operating hours, maintenance-free Features: Grid holes for fixtures Material versatility: Marking a wide variety of materials Included: Head 200x200 mm, other sizes available CE Declaration of Conformity 3-year warranty and support German software Training for machine and programs Invoice Included: USB cable Power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Applications: Perfect for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets, and image engraving. This laser is ideal for engraving and annealing metals, as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We perform service ourselves and keep most spare parts in stock right here in Germany to ensure you receive fast and efficient support. Shipping and Installation: With shipping, we will connect the machine to you remotely, set it up, and provide brief instructions. Alternatively, we can deliver it in person, install it, set it up, and provide instruction. The price is negotiated based on your zip code. Consultation: For detailed advice, visit our website or call us directly. We are happy to answer all your questions.

Condition: new, MASTERWOOD CNC machining center type PROJECT TF 100 2.0"PARTNERSHIP EDITION" - MAST0337The Masterwood CNC machining center PROJECT TFis ideal for complex CNC machining in the smallest of spaces,for solid wood, panel materials or antages:- Very little space required- Maximum time savings thanks to extremely fast production times- Fast amortization due to the low purchase price- Quick learning of the technology thanks to the simplest operation- Cleanliness of the workpieces with low suction powerby machining from below- Extremely fast, simple and variable programmingwith the MASTERWORK software (standard)- Extremely quick and easy programming completeCabinets through the use of Palette CAD (option)Technical specifications:Axes:X-axis: Max. Workpiece length: unlimitedMin. Workpiece length: 250mmTravel speed: 0-25 m / min.Y-axis: Max. Workpiece width: 1,000mm for all unitsMin. Workpiece width: 80mmTravel speed: 0-50 m / min.Z-axis: Max. Workpiece thickness: 60mmMin. Workpiece thickness: 10mmTravel speed: 0-20 m / minimum and maximum workpiece sizes aredepending on the weight and also on the ratioLength to width!Aggregates:16 mm drill head:vertical spindles in X-direction: 5 piecesvertical spindles in Y-direction: 5 pieceshorizontal double drilling spindle in X-direction:2 + 2 pieceshorizontal double drilling spindle in Y-direction:1 + 1 pieceDistance drilling spindles: 32mmSpeed ??of drilling spindles: 4,000 or: 1.7 kWGrooving saw: in the X directionSpeed: 4,000 . Saw blade diameter: 125mmMotor: 1.7 kW (the grooving saw is integrated in the drill head)Control:Personal computerProcessor: Intel Core i3-8100 CPU  3.60 GHzRAM: 8 GBHard disk: 300 GBCD-ROM driveColor screenIntegrated video card2 ethernet cardsOperating system: Windows 10 Pro - 64 bitProgram: MASTERWORK MACHINE VERSIONFurther data:Required air pressure: 8 barAir consumption: max. 750 l / tion:Volume: 2,000 m³ / hAir speed: 25 - 30 m / raction nozzle: 1 x 150mmFurther equipment features:- Air tables in the work area- Roller table in the infeed and outfeed- Sensor for plate measurement- Ball screw and linear guides- rack and pinion drive- Import of DXF files(Operating instructions, circuit and pneumatics diagram isin digital form at)"PARTNERSHIP EDITION" consisting of:Milling unit,including MASTERWORK software extensionSpeed: 1,000 to 18,000 or: 4.5 kW with ISO 30 mountIncl. integrated suction control (when drillingonly the drill head becomes, when milling only the milling unitsucked off)6-fold tool changer3 pieces ISO 30 collet chucks including colletTooling, consisting of:HW dowel drill:5 pieces 5mm - GL 70mm - blind hole drill1 piece 5mm - GL 70mm - through drill4 pieces 8mm - GL 57.5mm - blind hole drill2 pieces 10mm - GL 57.5mm - blind hole drill1 piece 10mm - GL 70mm - blind hole drill1 piece 8mm - GL 70mm - blind hole drill1 piece 15mm - GL 70mm - blind hole drill1 piece 35mm - GL 70mm - blind hole drill1 HW grooving saw blade d = 125mm, bore = 20mm, width: 4.0mm, Z = 35 WSA1 DIA milling cutter, right - GL = 103mm, NL = 43mm, D = 18mm, shank: 20x50mm, Z 1 + 11 DIA milling cutter, left - GL = 103mm, NL = 43mm, D = 18mm, shank: 20x50mm, Z 1 + 11 VHW WP finishing cutter, right, D = 10mmFoldable roller conveyor in the infeedFoldable roller conveyor in the outletAutomatic central lubricationEquipment:Complete package for CLAMEX connectors consisting of:- Angular gear with CLAMEX milling cutter including spec... Hsdpfx Ajvwf Iisgloh

Condition: new, Year of construction: 2025, New cylindrical grinding machine – or save around 70% with FlexiGrind? Simple control replacement on your old CNC cylindrical grinding machine with FlexiGrind! Modernizing existing cylindrical grinding machines has never been easier. FlexiGrind offers a cost-effective and efficient solution: Instead of a complete overhaul of the old machine, the FlexiGrind control kit replaces only the outdated electronic and electrical components. This is done directly on-site, minimizing downtime and avoiding the high costs of a complete new machine investment. Thanks to easy-to-understand installation instructions, the replacement can be performed either by your own maintenance team or our installation team. The FlexiGrind kit replaces all outdated, critical components of your cylindrical grinding machine, such as the control system, control cabinet, motors, linear encoders, and cables – in a single step. It includes the following hardware components: • Modern control system for precise grinding and easier operation from FANUC and SIEMENS • New control cabinet with a clear layout • Three new servo motors for the indexable insert, X, and Z axes • Adapters for the new servo motors • New grinding spindle motor for precise spindle speeds • New absolute length measuring systems for maximum precision • New Euchner safety switches for maximum safety • Completely new cabling for reliable operation The kit also includes user-friendly software that enables simple operation and a quick return to operation. All necessary documentation for installation and programming is included. The FlexiGrind kit complies with the latest safety standards and is CE-certified. Simply replace your old control system and defective components with our new FlexiGrind control system kit. Control system conversion made easy - feasible for any maintenance thanks to the clear assembly instructions! Hsdpsvfp Uvefx Aglsh Versatility and Compatibility The FlexiGrind kit is specifically designed for Karstens and Bahmüller CNC cylindrical grinding machines. However, it is also available for machines from other manufacturers such as Studer, Tacchella, Kellenberger, Junker, and EMAG upon request. Request a control system replacement today to get your defective or outdated cylindrical grinding machine running smoothly again!

Condition: new, Condition new Pressing force 175 tons bending length 3050 mm axes Y1 / Y2 and X axis Control: Durma Sky 22 rapid traverse Y axis 200 mm/s stroke 265 mm Distance between uprights 2600 mm Overhang in the side stand 450 mm Installation height 530 mm Drive concept servo-hydraulic, up to 72 % power saving Working speed Y-axis 10 mm/s Retracting speed Y-axis 500mm/s Backgauge travel X-axis 650 mm Backgauge speed X-axis 500 mm/s Backgauge speed R-axis 350mm/s backgauge travel R-axis 250 mm Hsdpfsh H Dnbjx Agloh Table height 900 mm Table width 104 mm Motor power 15 kW length 4250 mm width 1700 mm height 2890 mm Weight 10900 kg 3 axes (Y1, Y2,X) CNC CONTROL DT-15 - 2D graphic display 15 - Intuitive touch-screen operation (simple drawing of the bending contour with the finger) - Direct programming of the bending angle - User-friendly programming in dialog form - Graphic simulation of the bending process - Automatic calculation of the stretched length for sheet cutting - Graphical product and tool memory - Correction option - Manual, semi-automatic and fully automatic working mode - Tonnage calculation/programming by the CNC - Internal data memory - USB connections for backup and program storage Servo motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC controlled crowning Intermediate pieces for upper die clamping die holder for 60 mm dies Laser protection device Fiessler AKAS mounted on upper beam Sheet support arms on linear guide Side and rear guards Equipment according to CE regulations Operating instructions in GERMAN and ENGLISH (symbol photo) Various options and equipment variants possible.

Condition: as good as new (ex-display), Year of construction: 2023, The environmentally friendly CNC servo press brakes from WEINBRENNER, model series WPS, represent a maximum improvement on the previous hydraulic standard machines. Up to 60 % energy savings and higher angular accuracy. The tool holder corresponds to the AMADA system, as do the tools. The stability of the press is optimized by the closed frame construction To compensate for deflection, the press is equipped with a motorized, CNC-controlled table crowning system (System WILA). Technical data: Maximum press capacity: 50 tons Bending length: 2040 mm Table width: 60 mm Table width with WILA lower tool: 90 mm Table height from floor: 930 mm Installation height: 590 mm Max. Press stroke: 300 mm Lowering speed: 150 mm/sec. Pressing speed: 10 mm/sec. Retraction speed: 150 mm/sec. Max. utilization range backgauge (X axis): 750 mm Max. utilization range backgauge (R axis): 160 mm Adjustment speed of the backgauge in the X-axis, servomotor: 330 mm/sec. Positioning accuracy of the backgauge: +/- 0.03 mm Hsdpsth U Edsfx Agleh Motor power: 2x 5.5 kW Equipment / standard accessories: - CNC control " ESA S875-2D". This enables easy graphic programming of products. After one the control unit calculates the bending sequence and all axis positions (including collision warning), 15" TFT color display touch screen, USB interface, network connection, tool directory for 50 punches and dies each. Graphic 2D programming, 2D display while working, maximum 4 axes + auxiliary functions. - Arm adjustable in height and sideways in 2 axes for ergonomic and convenient operation of the CNC control. - Split upper tool, "Amada" system, manufacturer Italy, material C 50 (HRC 50-52) induction-hardened and ground on the working surfaces. ground on the working surfaces. Load capacity: 100 to per meter. Standard delivery: Pitch: 2 x 835 mm, horn left and right each 100 mm each, rest in smaller pitch. Height 66.6 mm - Bottom tool / 4-fold prism cube CroMo 4, ground 60x60 mm, V-openings standard: 16 - 22 - 35 - 50 mm - 2-axis backgauge "X - R", AC servomotors, travel: X=0 mm, R=160 mm, positioning accuracy + / - 0.03 mm, Travel speed: 330 mm / sec. Including 3 laterally adjustable stop fingers - Laser protection "FIESSLER" with 2-fold beam, type AKAS / LCII, operation of the press only possible with foot pedal. - Automatic motorized table crowning system WILA, integrated in the CNC - front sheet supports (2 pieces) can be moved laterally via linear guide, height adjustment with handwheel. Equipped with wide brush supports - German operating instructions with spare parts list - CE conformity

Condition: excellent (used), Year of construction: 2000, Hello I have for sale Deckel machining center Maho DMU 80T -4 axes Control: Heidenhain Technical condition of the machine - perfect Year of production: 2000 Country of Manufacture: Germany Machine parameters: "X" axis travel : 880mm "Y" axis travel: 650mm "Z" axis travel 650mm Automatically Swiveling Head Maximum spindle speed 12,000 rpm. Tool storage: 24pcs(2x12 tools) Heidenhain measuring scales on all axes Spindle cooling High-pressure cooling system Chip conveyor central lubrication Hedpsr Rp Tdefx Agljh hydraulic tool clamping spindle taper SK40 Full programming instructions Documentation Included in the price of loading

Condition: excellent (used), Year of construction: 2003, operating hours: 9,100 h, I have for sale a CNC LATHE DMG GILDEMEISTER CTX 310 V3 driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: Heidenhain Data Pilot 4290 Country of manufacture: Germany Year of manufacture 2003 - Number of machine operating hours 9144 hours Machine parameters: - head: 12 - tools for VDI-30 holders + TurnPlus attachment - max. rpm 5000 /min. - C axis - driven tools - hydraulic tailstock - Through spindle - max. turning diameter X axis: 190 mm - max. turning length Z axis: 455 mm - cooling system - hydraulic chuck Three-jaw SMW AutoBlock - spindle bore Fi-50mm - chip conveyor - full programming instructions - Mechanical and Electrical Documentation - Machine weight: 3.8t. - loading included in the price Machine after a full inspection. 100% efficient. Connected and ready to work. Hodpovxxhfofx Agleh WE ALSO TAKE CARE OF ALL PROCEDURES RELATED TO LEASING!!! Stal-Com has been selling, servicing and training CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. Our machines are purchased by customers from all over Europe and part of Asia, in addition to customers from Poland. Each machine can be checked during production because we also do machining. After purchasing a machine in our company, we conduct training for the crew and we can also set up the production of parts at the customer's. We cooperate with many companies on the basis of permanent cooperation to which we supply subsequent machine tools

Year of construction: 2006, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on Kjeldahl method. Automatic, to analyse proteic nitrogen in raw material samples or processed material for food industry. Specific methods availables. Results complies with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty user free programs. • Additionally, the system has three fixed programs: Hodpjfiliwsfx Agljh – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consume: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies there is the possibility of selling in installments. Price Euro 4.000 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used Hsdpfx Ajfiulfjgljh • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.650+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 99 mm/s, pressure: 130 bar, wall thickness: 2 mm, working length: 1,920 mm, Equipment: documentation/manual, 32x2mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are B, BR, BRF. B series makes bending operation automatically. BR series makes bending and rotating operation automatically. BRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for BR and BRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. Hsdpevx D D Sefx Agljh User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 4 mm, working length: 3,000 mm, Equipment: documentation/manual, 76x4mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems. Hsdpovwg D Sefx Aglsh

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 51 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 11.5 kW (15.64 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 3 mm, working length: 3,000 mm, Equipment: documentation/manual, 51x3mm NC Type Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. Hodpovwg Evsfx Agleh With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 8.2 kW (11.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 99 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 32x2mm Fully Automatic Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. Hodpfxsvwg Hms Agloh A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 10-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 4,100 mm, stroke length: 300 mm, throat depth: 500 mm, distance between stands: 3,600 mm, installation height: 540 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, travel distance X-axis: 750 mm, back gauge: 750 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, overall weight: 20,000 kg, total length: 5,100 mm, total width: 2,130 mm, total height: 3,280 mm, warranty duration: 24 months, pressing force: 320 t, distance between side stands: 24 mm, power of the servo motor: 30 W, table width: 110 mm, working height: 940 mm, Standard equipment of the Prime 41320 press brake Y1, Y2, X, R, Z1, Z2 (6 axes): Precise control for complex and accurate bending operations. Control unit - Step Rock 22: Modern CNC system for easy operation and fast programming. CE-certified safety cage with switch: Maximum safety during operation. Hjdpfevlwl Aex Agljh CNC-controlled dynamic hydraulic crowning system: Hydraulic support for consistent and precise bending results. Servo-driven back gauge axes (X-R-Z1, Z2): Flexible and precise positioning of the back gauges. European style tool holders: Compatibility with standard tools for quick exchange. Front support arms (T-slot and brakes, 2 pieces): Stabilization and guidance of workpieces during operation. AP01-AP02 Sheet metal following system preparation: Enables the integration of an advanced sheet metal following system. Hydraulic block and valves according to international standards: Reliable and durable. Electrical components according to international standards: Efficiency and safety at the highest level. Operating manual: Detailed instructions for installation, operation and maintenance. Optional equipment and prices for the Prime 41320 press brake Control units: Cybelec Visitouch 19T Delem DA-53T / DA-69T / DA-66T ESA S640 AP3-AP4 Automatic sheet metal following system: Automatic control for precise and safe work with large sheets. Quick clamping device: Enables quick and safe tool changes to increase efficiency. Split lower and upper tools: Flexibility when processing different material thicknesses and shapes. Parking area for the sheet metal following system: Efficient storage and organization of the sheet metal following system components. Central lubrication system: Automatic lubrication of all important components for a longer service life of the machine. Oil cooler: Maintains the optimal temperature of the hydraulic system even during intensive use. Additional backgauge finger and front support arms: Provides additional support and flexibility for larger or more complex workpieces.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device Hsdjyfhi Njpfx Agloh - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 89N1160, cutting width (max.): 800 mm, insertion depth: 800 mm, overall weight: 900 kg, reverse speed: 70 mm/s, TECHNICAL DETAILS Cutting width: 800 mm Insertion depth: 800 mm Maximum operating height: 100 mm Pressing force: 180–2,700 daN Minimum cut without cover plate: 15 mm Minimum cut with cover plate: 50 mm Return speed: 70 mm/s MACHINE DETAILS Power consumption: 4.0 kVA Power supply: 400 V, 50 Hz, 2.6 A Control: 18.5" touchscreen Program memory: 1,998 jobs Total cuts: 24,551 Weight: 900 kg Table: Stainless steel with air support EQUIPMENT 1× mounted POLAR 78 1× new POLAR 78 SKH-2, 960×110×11.7 mm Process visualization Hydraulic swinging angled cut LED cutting line indicator Air table Robust machine body Hsdjycr Ikjpfx Aglsh Ultra-fast knife change with POLAR OptiKnife New spare knife

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Hodoyf Eucspfx Aglsh Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 3,000 mm, overall weight: 2,700 kg, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,000 mm Working area Z-axis: 60 mm Maximum workpiece length: 3,000 mm Minimum workpiece length: 90 mm Maximum workpiece width: 1,000 mm Minimum workpiece width: 70 mm Maximum workpiece height: 60 mm Minimum workpiece height: 8 mm Vertical electrospindle power: 4.8 HP Circular saw unit diameter: 150 mm Circular saw unit power: 2.3 HP Vertical drilling spindles: 29 Horizontal drilling spindles (X-axis): 8 Horizontal drilling spindles (Y-axis): 2 Hodpfxeyf Elzo Agloh MACHINE DETAILS Compressed air: 7/8 bar Total installed power: 20 kW Machine weight: 2,700 kg EQUIPMENT Numerical control with Biesseworks software Infeed table with motorized belts (left) 2 panel clamps Outfeed table with motorized belts (right) Protection for machining head with emergency stop front mats Transfer system for panel loading and unloading with aluminium profiles Belt-driven table for panel transfer/lifting bar BiesseWorks machining programming system

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 50 kg, working height: 80 mm, working width: 1,300 mm, working length: 2,500 mm, TECHNICAL DETAILS Working length: 300 - 2,500 mm Hedpfx Agoydlk Ioloh Working width: 60 - 1,300 mm Working height: 10 - 80 mm Maximum workpiece weight: 50 kg MACHINE DETAILS Working height: Up to 1,300 mm Dimensional tolerance readability: ±0.15 mm Tool change: NC-controlled Programming: PC - TPA Albatros software Operating system: Windows 7 Professional EQUIPMENT Machining on 6 sides of the panel Double-section chain – X axis patent Linear, circular, and spiral interpolation Double zero point reading Mirror program management Turret tool diameter optimizer Optimizer for independent spindle diameter DXF file conversion (geometric conversion) Import of work lists in ASCII format Additional key for programming from the office Gun-type barcode reader 17-inch LCD monitor Panel loading and handling via motorized vertical comb feed with rollers Height reading system with independent axis Thickness measuring system with mechanical probe Brushless motors with programmable speed control via NC Drilling unit with independent vertical and horizontal spindles Upper turret milling unit with 10 positions Automatic lubrication 180° panel transfer and rotation system Discharge system with motorized belt

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Control: Siemens 840D or equivalent CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres EQUIPMENT Coolant filtration system Universal applicability for different tool types and geometries High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Easy maintenance due to modular design and central supply units Hsdpfeya Dy Hsx Agloh

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 400 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 760 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 1,020 x 410 mm Max. table load: 400 kg Spindle speed: 8,000 rpm Tool holder: CAT 40 / BT 40 Tool changer: 20 positions Accuracy Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Hjdpfxoya Dw So Aglsh MACHINE DETAILS Control: MAZATROL M-PLUS EQUIPMENT Robust construction Fully hydraulic table Stable cast iron structure Suitable for aluminium, steel and plastics User-friendly programming Integrated simulation and diagnostic software Regularly serviced Coolant and lubrication systems intact

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, In January 2025, a new spindle was installed! The machine has been regularly maintained! TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 800 mm Feed rates Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous duty) Vertical: 10,000 rpm Spindle speed S1 (continuous duty) Universal swivel head, 2 axes: 18,000 rpm Hodeya Dnkspfx Agljh MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Current draw: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT DINO series Precision linear guides and ball screws Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Includes documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Interchangeable milling head with 4th/5th axis