Used Ready To Plug for sale (21,260)

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We supply you with the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #502 Please note: Images are sample pictures. Actual equipment and color may vary. STS V-2.0 Tank • Tank capacity: 2,000 liters • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Side rinsing port in the tank for removing contamination or blockages without opening the tank cover • Tank lid opens fully toward the passenger side and is secured with hook bolts • Two safety stages installed as standard to prevent compressor damage • Siphon separator – overflow protection with two balls and sight glass • Pressure gauge on the over-suction unit with protective guard • Mechanical level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 l/min air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose to avoid exposure inside the engine unit • Silencer for vacuum compressor with oil trap • Stainless steel heat shield above exhaust • 1 liter biodegradable compressor oil, stored in oil bottle holder • 5-liter fuel canister in holder • Standard funnel with long neck for changing and refilling engine oil • All engine components and accessories stored in lockable aluminum engine box, powder-coated in your desired color Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem axle chassis, 3.5 tons • Track width aligned with passenger cars and Sprinters for optimal driving performance • Lowest possible center of gravity for the tank • Two axles, each with 1,750 kg load capacity, independent wheel suspension from a renowned manufacturer • Continuous welded V-drawbar • Sturdy fenders with metal lamp housings • Stake holders for quick securing of suction hoses with rubber straps • Storage options for tools and accessories Vacuum Tank • Overrun brake with auto-reverse • Automatic safety ball coupling Nedpfx Asxffv Sof Iswb • Reinforced jockey wheel • 13-pin electrical connection Connections and Hoses • 2x suction hoses (3”) 5 meters long, with Perrot couplings • 1x suction lance 3” (1,500 mm long) • 1x Perrot coupling (3”) on lower tank lid • 1x Perrot coupling (3”) on the right side in driving direction Special builds and custom equipment available on request – Check us out: For more detailed information and/or images, please contact us directly. A wide selection of further vehicles for SALE or RENT can be found at: Subject to alterations, prior sale, and errors. The buyer is required to independently verify the condition and equipment of the goods. Sale exclusively under our general terms and conditions and with exclusion of any warranty.

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Gossen, control plug-in cards circuit boards -Switching regulator card: Constant S83 S5 EU 12 -Plug-in card: 7204-6072C0 -Temperature controller card: Gossen Pantatherm DS 4 4400-S 8 pieces Nodpfx Afsnah Drs Iewb -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 5.2 kg

Year of construction: 1991, condition: good (used), AS crane hooks, frame formwork, pipe slings, shaft ring slings -Load capacity: 1000 kg Nwsdpedi Smdofx Af Ijb -Number: 3 claws present -Price: per piece -Weight: 13 kg

Condition: used, fuel type: diesel, lifting mast, stacker mast, forklift mast, lifting frame, rear loader -Manufacturer: Linde, forklift mast from diesel forklift type H60 -Load capacity: approx. 6000 kg -Stroke: mm -Forklift shield: mm -Recording/Dimensions: see photos / technical drawing -Dimensions: 3570/1800/450 mm Nwjdpfxsuhr Rys Af Iob -Weight: 1820 kg

Condition: good (used), Plug, socket insert, connector -Type: DSTV-SA 24 -Price: per piece Nwsdpfjb A Rn Ajx Af Iob -Number: 5x available -Weight: 0.5 kg

Year of construction: 1992, condition: good (used), Lifting mast, stacker mast, forklift mast, lifting frame, sideloader -Manufacturer: Baumann, forklift mast from sideloader type E4S 25/14-13.5 -Load capacity: approx. 2500 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing Nwedpfx Afjxaptqo Iob -Transport dimensions: 3900/1445/H700 mm -Weight: 1630 kg

Condition: good (used), Plug -Type: SAISW-5/9 Nedpob A Spasfx Af Ijwb -Quantity: 50x available -Price/Sale: complete -Weight: 1 kg

Condition: good (used), Lifting mast, stacker mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, forklift mast triplex mas from electric forklift type E20 -Load capacity: kg -Recording/Dimensions: see photos / technical drawing Nedpfjwradaex Af Iowb -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Condition: used, CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm Nwedonah Dcjpfx Af Isb -Weight: 0.8 kg

Condition: good (used), Crank winch, Dunkraft, Karohebebock, steel winch Njdpjt H Trdsfx Af Ijwb -Manufacturer: VEB, steel winch with ratchet safety crank type 10.10 -Load capacity: 10 t -Lifting height: 330 mm -Dimensions: 300/210/H685 mm -Weight: 35 kg

Year of construction: 1983, condition: good (used), Lifting mast, stacker mast, forklift mast, lifting frame, rear forklift -Manufacturer: Baumann, forklift mast from sideloader type AS 60/18/15 -Load capacity: approx. 6000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Transport dimensions: 3200/1620/H750 mm -Weight: 2100 kg Nwsdpoxapt Dofx Af Iob

Condition: used, Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 20-40 mm -Load capacity: 12 t -Quantity: 2x clamps available -Dimensions: 330/90/H365 mm -Weight: 48 kg/pc. Nodpfx Ajp A A R Isf Iewb

Condition: good (used), Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 3000 kg load capacity -Number: 2x available -Price: per piece Nwsdpodvmbdefx Af Ieb -Dimensions: 690/140/H370 mm -Weight: 28 kg

Condition: used, CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA LP electronics, control plug-in cards printed circuit boards -Type: ESC-CI V1.40 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm Nwjdponah A Hsfx Af Isb -Weight: 0.8 kg

Condition: good (used), Multi-purpose hoist, grab hoist -Load capacity: max. 1200 kg Nwjdpfjdvnb Hjx Af Ijb -for: rope Ø 10 mm -Quantity: 1 piece available -Dimensions: 640/150/H370 mm -Weight: 18 kg

Condition: used, fuel type: diesel, Lifting mast, forklift mast, forklift mast, mast, rear stacker -Triplex mast: with free lift -Load capacity: approx. 2000 kg -Lifting height: approx. 3300 mm -Forklift shield: mm -Recording/Dimensions: see photos/techn. drawing -Number: 1x mast available Nwjdpfohp A Iyex Af Ijb -Price per piece -Dimension retracted: 2070/1190/290 mm -Weight: 580 kg/pc.

Condition: good (used), Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp Nwodpfsp A A Rvex Af Iob -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 8-32 mm -Load capacity: 8 t -Quantity: 1x clamps available -Dimensions: 275/80/H300 mm -Weight: 30 kg

Condition: good (used), plug Nedpfx Asb A Hytof Iswb -Type: SACC-M12MS-5SC M -Number: 20x available -Price: complete -Weight: 0.5 kg

Condition: good (used), Lifting mast, stacker mast, forklift mast, lifting frame, rear stacker, triplex mast -Manufacturer: Clark EML, forklift mast triplex mast type 7000 T -Load capacity: 5000/800 kg -Lifting height: 7500 mm -Height: 3860 mm -technical data: see photo type plate Nwodpfsw U Tvgjx Af Ieb -Recording/Dimensions: see photos / technical drawing -Dimensions: 3730/1300/510 mm -Weight: 2100 kg

Condition: good (used), Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift -Free-view mast -Load capacity: 2000 kg Nwjdpfecd Ucgex Af Isb -Lifting height: approx. 4000 mm -Forklift shield: 1150 x 405 mm -Dimensions: 350/1150/H2620 mm -Weight: 720 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 35 mm -Load capacity: 4 t Nwjdegtn Diopfx Af Isb -Dimensions: 230/110 / H450 mm -Weight: 22 kg

Condition: used, fuel type: diesel, Lift mast, forklift mast, forklift mast, mast, rear forklift -Freight mast -Load capacity: 1500 kg Nodpfxjcd Ub To Af Iewb -Lifting height: approx. 4600 mm -Forklift sign: 1040 x 405 mm -Dimensions: 400/1100/H2930 mm -Weight: 700 kg

Condition: used, fuel type: diesel, Lift mast, forklift mast, forklift mast, mast, rear forklift -forklift mast -Load capacity: 2500 kg -Lifting height: approx. 3500 mm -Forklift sign: 940 x 405 mm -Dimensions: 560/1000/H2230 mm -Weight: 665 kg Nsdpfx Afocd Ucdo Ijwb

Year of construction: 1988, condition: used, Crank winch, Dunkraft, diamond jack, steel winch Nwodpfx Aehgm D Hof Iob -Manufacturer: Pfaff, steel winch type 0104000 -Load capacity: 1.5 t -Lifting height: 0.35 m -Number: 4x winch available -Price per piece -Dimension: 740/120/140 mm -Weight: 10.3 kg / pc.

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Sheet metal claws Nwodpfx Aod Ergmof Ijb -Span width: 160-254 mm -Load capacity: 4000 kg -Number: 1x terminals available -Price: per piece -Weight: 11 kg