Used Respiratory Protection Filter for sale (17,757)

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Ppedpfsvg U Dxjx Agkou Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: used, Year of construction: 2004, Screen changer EREMA SW8/134 RTF Continuous partial area backwash filter with 4 carrier pistons (8 sieves) for heavily contaminated polymers Minimal pressure differences when backwashing or changing sieves The melt filter system meets the highest demands for fine filtration and is characterized by robustness, a high degree of automation and maximum availability, plus improved homogenization of the melt Main components: 1x continuous 4-piston backwash filter 1x control monitoring unit 1x operating unit for filter change 1x hydraulic unit System features: - Sieve diameter Ø 134mm - Active sieve area 1128cm² - fully automatic rinsing processes without interrupting production Podpfxsualalo Agkspu - Technical documents - Year of manufacture 2004 Subject to prior sale Please only send inquiries by email Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize the shipping. This is not part of the offer price.

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality Ppodpfodtdwaex Agkeu (for free-fall applications to investigate dry and free-flowing bulk solids) Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Year of construction: 2021, condition: new, Overband plate magnet from remaining stock / overproduction Ppodpfxefktk He Agkju Manufactured from stainless steel 1.4301, hermetically sealed. For sale: a plate magnet with threaded holes on the back. The magnet can be used as a "police magnet" or to filter out metal contaminants above a conveyor belt. Ring eyelets for suspension are included. Dimensions of the magnet block: 620 x 420 x 250 mm Only 1 unit available for immediate delivery. Many other dimensions available in stock.

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x800mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. Ppodpfjfiwg Tox Agkou A feeling of security for both sides! Protect yourself and your fellow human beings from infection! The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Product characteristics External dimensions: 1059mm x 1077mm Internal dimensions: 970mm x 975mm

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x800mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. A feeling of security for both sides! Protect yourself and your fellow human beings from infection! The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Pjdpofiwf Eefx Agkspu Product characteristics External dimensions: 1064mm x 867mm Internal dimensions: 974mm x 775mm

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x800mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. A feeling of security for both sides! Pjdpfx Ajfiwf Tjgkopu Protect yourself and your fellow human beings from infection! The infection protection walls give employees and customers more security when dealing with one another without impairing communication.

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x800mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. A feeling of security for both sides! Protect yourself and your fellow human beings from infection! Ppodofiwf Nspfx Agksu The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Product characteristics External dimensions: 11060 x 2064 Internal dimensions: 970 x 1974mm

Year of construction: 2018, condition: new, For sale is a magnetic filter that has only been used once. Sealed. Includes 9 magnetic filter rods, with cleaning function. Psdpfsdzp R Tox Agkopu

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x1200mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. A feeling of security for both sides! Protect yourself and your fellow human beings from infection! Ppsdpfx Ajfiwg Dsgksu The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Product characteristics External dimensions: 1064mm x 867mm Internal dimensions: 974mm x 775mm

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Pjdpohv U S Njfx Agkspu Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Psdpfsikivijx Agkjpu

Year of construction: 2026, condition: new, functionality: fully functional, New filter body Model: NYB‑30 Filter Area: 30 m² Cake Volume: ~600 L Capacity: 6–8 T/h (crude oil) Working Pressure: 0.1–0.4 MPa (max 0.5 MPa) Shell Temperature: ≤ 150 °C Machine Volume: ~2,300 L Weight: ~2,500 kg Ppsdewwmziepfx Agkeu Shell Diameter: ~1,200 mm Plate Spacing: 70 mm Inlet/Outlet: DN 50 inlet/outlet, DN 40 overflow, DN 500 discharge Total Height: ~3,150 mm Key Features: Hermetic sealed vertical structure – no leakage or odor High filtration precision – ideal for pre-degumming and post-bleaching crude oils Low maintenance – long service life of filter plates Simple cake discharge – hydraulic or manual vibration release Can be steam jacketed – optional heating for waxy oils Filter aid compatible – supports use of bleaching earth or diatomaceous earth Typical Applications Crude oil clarification after settling Bleaching earth filtration (after bleaching tank) Post-degumming or post-neutralization polish Winterization step before dewaxing Food, biodiesel, cosmetic-grade oil prefiltration Neuer Juneng NYB-30 vertikaler Druckblattfilter mit 30 m² Filterfläche. Angeboten wird nur der Filterkörper, ohne PLC-Automatisierung und ohne automatischen Ventilstand. Technische Daten: - Filterfläche: 30 m² - Filterkuchenvolumen: ca. 600 L - Kapazität: ca. 6–8 t/h für Rohöl / Pflanzenöl - Arbeitsdruck: 0,1–0,4 MPa, max. 0,5 MPa - Arbeitstemperatur: ≤150 °C - Behältervolumen: ca. 2.300 L - Gewicht: ca. 2.500 kg - Standardausführung in Kohlenstoffstahl - Edelstahl-Ausführung gegen Aufpreis auf Anfrage erhältlich Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen.

Condition: used, Year of construction: 2001, type of input current: three-phase, filter area: 20.4 m², suction capacity: 3,200 m³/h, overall weight: 350 kg, Oil mist extractor for CNC machines, filter separator by Donaldson Torit. The device is designed for the filtration of oil mist (both emulsions and pure oil), vapors, and fumes originating from various metalworking processes. Filtration efficiency reaches 99.97%. Model: DMC-D1 2.2 kW three-phase fan Inlet diameter: 250 mm Capacity: 3200 m³/h Filtration area – 20.4 m² Year of manufacture – 2001 Dimensions: Height – 2.90 m Width – 0.93 m x 0.75 m Weight – 350 kg Podpfx Ajymk Udogkopu Stock number – 1111

Year of construction: 2020, condition: new, Dimensions: 250x250x80mm Filter systems are used for the thorough separation of finest ferrous metal contaminants. Examination of shoe goods Universally applicable in pipe systems, funnels & slides Easy handling and cleaning Permanent magnetic filter grids can be manufactured in round, rectangular or square design. Ppodsdzqw Iopfx Agksu Ferrous particles are reliably filtered out of the ware as they pass through the grates. In addition, this design provides easy cleaning of the stave. The filter system can be removed from the jacket with a handle. The maximum operating temperature is 80 ° C.

Condition: good (used), Clean air extraction system Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V Ppjdpfxsrb D No Agksu

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Psdpfx Aer R Ewlegkopu Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: good (used), Year of construction: 1995, Name: Used chamber filter press Manufacturer: Diefenbach Type: FP DE 800 Year built: 1995 Plate size: 800 x 800 mm Number plates: 75 Press content: Approx. 1.100 liters Filter area: Approx. 82 m2 Filter pressure: 15 bar Cake thickness: 30 mm Cycle: Closed Plate transport: Automatically Ppsdpfx Aszb Utyogkou Plate material: Polypropylene Construction form: Bridge beam press Filter cloth washer: No Dimensions: L 6.965 x W 1.300 x H 2.022 mm Empty weight: 7.200 kg Technical doc.: Yes Accessories: A switch cabinet, a control cabinet, a hydraulic system, a light curtain Condition: Used-good Note: It will be available starting in August. Price: By request

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Quantity: 1 piece available -Price: per piece Pjdpfsy R S E Hex Agkjpu -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Ppjdohwhf Rjpfx Agksu Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2024, functionality: fully functional, 3M Encapsulated System Holder 16EZB – Filter holder for production capsules Manufacturer: 3M Purification Inc. / 3M Separation and Purification Sciences Division Model: 3M™ Encapsulated System Holder 16EZB Year of manufacture: 2024 Location: Marburg, Germany Condition: Used, already in operation New price: approx. 78,000 USD Description: For sale is a high-quality 3M™ Encapsulated System Holder, type 16EZB, for use in biopharmaceutical production, pilot plants, or process development. The filter holder was specifically designed to accommodate 3M production capsules and is suitable for both upstream and downstream processes. The vertical process design ensures optimal media utilization. The system allows for quick capsule changes and reduces cleaning and validation efforts compared to conventional stainless steel filter housings. Technical features: Model: 16EZB Accommodates 1 to 7 multi-cell production capsules Robust stainless steel construction Vertical operating position for optimal media utilization Swivel design for easy loading and unloading Mobile system with industrial swivel casters Locking mechanism with two handles Suitable for pilot and production scale Maximum differential pressure load: 3.4 bar (50 psid) Materials: Frame: Stainless steel 304 End plates: Stainless steel 304 Ppodpjzbkr Ejfx Agksu Guide rods: Stainless steel 316 Base: Stainless steel 304 Locking elements: Stainless steel 304 Rollers: Polyurethane on stainless steel construction Application areas: Biopharmaceutical production Cell culture harvest Monoclonal antibodies (mAb) Recombinant proteins Microbial filtration Downstream process steps Pilot and scale-up applications Advantages: No stainless steel filter housings required Reduced cleaning and validation efforts Quick capsule changes Low risk of contamination Space-saving design High process flexibility Scope of supply: 3M Encapsulated System Holder 16EZB Used, functional Further details and photos on request Inspection: Possible by appointment in Marburg. Price: Negotiable Contact: Further information, technical documents, and inspection appointments on request.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Ppedpfx Agjhv U Tqekeu Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, mileage: 696,000 km, power: 440 kW (598.23 HP), first registration: 12/2009, fuel type: diesel, fuel: diesel, Year of construction: 2019, SCANIA G 440 LB 6x2 4MNA ADR with Steering/Lift Axle, WILLIG Superstructure for Used Oil and Filter Disposal with Tilting Tank !! EXCELLENT CONDITION !! ADR Hazard Classes: FL, EX II, EX II, OX, AT Chassis: • EURO 5 • Displacement: 12,740 cm³ • Engine Power: 324 kW / 440 HP • Axle Configuration: 6x2 • Lift/steering axle (3rd axle) • Retarder • Cruise control • Automatic climate control • Auxiliary heater • OPTICRUISE automated transmission with clutch pedal • Differential lock • TC – Traction control / switchable • Hill start assist • Warning beacons • Exhaust gas recirculation • Multifunction steering wheel • Reversing camera • Airbag • Radio / CD player • Roof hatch • ALU tank: 300 liters • GVW: 26,000 kg (28,000 kg technically possible) • Unladen weight: 13,300 kg • Gross train weight: 12,700 kg! • Wheelbase: 4,600 mm Tyres: • Front axle: 385/65 R22.5 • Rear axle: 315/80 R22.5 • Lift axle: 315/80 R22.5 • Tread depth: 12/13/12/13/12/11/6/6 mm Tank Body WILLIG Type HL 250 • 2-chamber system with filter presses • 2 x discharge racks • Rear loader with 2 arms for 2 containers of 120 / 240 liters each or 1 x 1,100 liters • Arm load capacity: 300 kg • Max. operating pressure rear loader: 110 bar • Tiltable tank body with hydraulic ram Pedpfownz Dtex Agkspu • Total volume: 11,000 liters • 3 chambers with level indicator • Chamber 1: 2,000 liters / max. fill: 1,920 liters • Chamber 2: 1,500 liters / max. fill: 1,440 liters • Chamber 3: 7,500 liters / max. fill: 7,200 liters • ALU fittings cabinet • Bottom valves • Vogelsang pump: suction + pumping • Centrifuge • Hydraulic hose reel at rear • Additional central outlets at rear • Control box / operator cabinet rear left • Remote control for tipping and draining + manual control with levers! - German vehicle! - 1 owner from new! - MOT + Safety Inspection: new! - ADR: new! - Tank inspection: new! - Ready for operation! Errors and prior sale excepted! = More information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter -Filter system: with vibrator -Type: TMS 8/10 Ppedjyh Hp Rjpfx Agkou -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm -Dimensions: 1070/680/H2530 mm -Weight: 243 kg

Condition: good (used), Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 Ppodpfofwg H Aex Agkou -Filter type: F 17 XA D 1st stage/filter element 3075 X -Content: 20 liters -Operating pressure: 16 bar -Connection: DN 80 -Price per piece - Quantity: 1 pieces -Dimensions: 380/300/H1170 mm -Weight: 72kg