Used Battenfeld for sale (117)

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) Ledpfx Asiyyndogzjhr > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm Lhodpfx Aex I Itbsgzsr (1) Film application unit (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Technical details: Length approx. 6,000 mm

Condition: good (used), Year of construction: 1992, Spray machine -Closing force: 25 tons -Screw diameter: 22 mm Lhodpfx Aob A H Rnsgzor -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single

Condition: good (used), Year of construction: 2008, operating hours: 26,033 h, clamping force: 4,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, displacement volume: 1,657 cm³, injection pressure: 2,022 bar, warehouse no.: 503220 manufacturer: BATTENFELD type: TM 400-3400 Ljdpfsx Id A Eex Agzohr controller: UNILOG B6S year of construction: 2008 operation hours: 26033 h clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar equipment included: Screentext Multi-Language CEE-socket 16A core pulling hydraulically 1x air valve 1x Anti vibration mounts interface robot EUROMAP 67 interface USB Schuko-socket 16A measures of machine l x w x h: 7.2m x 1.75m x 2.42m total weight: 16400KG

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Lhjdex Nhadjpfx Agzer Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Total power: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2001, operating hours: 92,300 h, condition: ready for operation (used), General Data Machine weight 160000 kg This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details. Application Types Ljdpfxsx D Ev Ns Agzshr Injection Moulding

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, Lhedpfsiyynwjx Agzjr send us your inquiry or visit us, you´re welcome

Condition: excellent (used), Year of construction: 2007, operating hours: 20,357 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 56 g, overall weight: 6,000 kg, Equipment: documentation/manual, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine dealership. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesale supplier of used injection moulding machines for over 25 years. Current note – Tax information and benefit for used machines: As of 01.07.2025, used machines may also be depreciated using the special 30% annual depreciation allowance. In addition to the lower purchase cost compared to a new machine, you can claim the same depreciation amounts as for a new machine. Reference: Growth Booster (§ 7 Section 2 EStG-E) Vertical injection moulding machine – thermoplastics, with rotary table, 2 or 4 stations Manufacturer: Battenfeld Model: Vertikal R 60 / 125 H Control: B4 Year: 2007 Machine number: 130953 – 100 Vertical machine with rotary table / 2-4 stations (750 mm) Operating hours: 20,357 h Injection unit (125) Screw diameter: 25 mm Screw length: 21.6 L/D Shot volume: 58.9 cm³ Lhsdpex Ak I Iofx Agzer Shot weight: 53.6 g Heating capacity: 6.78 kW Heating zones: 4 Nozzle stroke: 200 mm Injection pressure: 2,149 bar Clamping unit Clamping force: 60 tons / 600 kN Opening stroke: 250 mm Min. mould installation height: 250 mm Ejector stroke: 150 mm Max. platen distance: 500 mm Rotary table diameter: 1,040 mm Weight: 6,000 kg Extras: - Light curtain - Automatic suction loader Simar FX 2504, year 2013 - Water manifold - Air valve

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Lhedpfxsu Eki So Agzsr Drive: Electric

Condition: good (used), Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, displacement volume: 5,655 cm³, ejector force: 118,000 N, ejector stroke: 300 mm, plate length: 1,690 mm, plate width: 1,960 mm, total height: 2,500 mm, overall weight: 76,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503007 manufacturer: BATTENFELD type: HM 10000-9200 controller: UNILOG B4 year of construction: 2003 operation hours: 67092 h clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar equipment included: screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts Ljdpfx Agex Icy Aozshr electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: excellent (used), Year of construction: 2017, Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 cc Clamping unit: Clamping force: 110 t Bar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - touchscreen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with Air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements Lhjdpfx Agjx Ng U Tozor The machine was serviced in Germany Robot Wittmann W818 Year of manufacture: 2015 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and the conveyor belt for an additional charge Dimensions: Weight: 4800 kg Length/width/height: 4.91x1.42x2.10 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1500 kN Opening stroke 300 mm This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information. Application Types Injection Moulding Lhodpfxex D R T Ho Agzsr

Year of construction: 2005, condition: ready for operation (used), Battenfeld TM 4500/2800 Year of production: 2005 Clamping unit : Clamping force: 450 t Ejector: hydraulic - stroke 250mm Clamping rail spacing: 800x800 mm Size of clamping plates: 1120x1120 mm Ledpslar Hiofx Agzehr Maximum distance between plates: 1530mm Ring diameter: 125mm Tool height: 300/770 Opening path at max form: 760mm Injection unit: Screw diameter: 75mm Injection weight: 1937 g Injection pressure: 1739 bar Metering volume: 1657 ccm Control: UNILOG B4 Additional equipment: Euromap Robot interface Air valve x 2 Hydraulic core pull controlled by proportional valve x 5 Injection unit is resistant to wear and corrosion Proportional valve on injection unit - precise injection Central lubrication Automatic mold height adjustment Parallel movements Dimensions: Length/width/height: 8.28x1.90x2.45 m Weight: 20400 kg

Condition: excellent (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, Battenfeld HM 500/3400 Injection Moulding Machine Clamping force: 500 t Year of manufacture: 2007 Injection weight: 1,937 g Injection unit .../3400 Screw diameter: 85 mm Specific injection pressure: 1,574 bar Injection volume: 2,128 ccm Injection weight: 1,937 g L/D ratio of screw: 22 Mould clamping system 500/... Clamping force: 500 t Platen dimensions: 1,590 x 1,470 mm Tie bar clearance: 1,000 x 800 mm Mould height: 450 mm Opening stroke: 1,150 mm Max. platen distance: 1,600 mm Ejector stroke: 250 mm General data: Weight: 25,000 kg Dimensions (L x W x H) [m]: 7.3 x 2.5 x 2.6 Lsdex Ifpajpfx Agzohr Equipment: - 1 x pneumatic valve - 2 x hydraulic cores - EUROMAP 67 interface - Bimetallic injection unit

Condition: ready for operation (used), Year of construction: 2004, operating hours: 90,000 h, functionality: fully functional, machine/vehicle number: 90063, clamping force: 800 kN, screw diameter: 75 mm, clearance between the columns: 1,120 mm, displacement volume: 3,756 cm³, injection weight: 3,400 g, mold height (min.): 500 mm, opening stroke: 1,250 mm, plate height: 153 mm, total length: 11,100 mm, total width: 3,200 mm, total height: 2,580 mm, overall weight: 63,000 kg, input voltage: 400 V, input current: 308 A, Equipment: documentation/manual, 2-K, double nozzle, machine without handling Ljdpsw U A Ufsfx Agzjhr

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, injection pressure: 3,000 bar, mold height (min.): 200 mm, opening stroke: 450 mm, overall weight: 4,800 kg, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m Ljdpfx Aex A Uc Nogzehr total weight: 4800KG

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 1300V/315 V-R / Vertical injection molding machine with rotary table Year of construction: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Lhsdpox Ng U Hofx Agzor Clamping unit: Clamping force: 130 t Distance between tie bars: 454x740 mm Size of the clamping platens: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/width/height: 3.83x2.33x4.16 m Drive: Pump/motor: 18.5 kW Heating output: 8.98 kW Total output: 27.48 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2003, condition: ready for operation (used), This Battenfeld HM 1600/750 was manufactured in 2003. It features a clamping force of 1,600 kN and an injection pressure of 2,116 bar. The screw diameter is 50 mm, and it includes a unilog CC300 B4 control system. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. Lhedpfxox D Hg Ne Agzjr Application Types Injection Moulding

Condition: excellent (used), Here we offer a SmartPower 210/1330 thermoset machine. Wittmann Battenfeld injection molding machine with control UNILOG B8 Machine was serviced / checked by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021. checked and updated to the latest possible status Within the scope of the complete inspection, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already existing pressure switches, the plant offers the possibility to the possibility to install additional cavity pressure switches (2 pieces Kistler module for cavity pressure changeover, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the cavity pressure switch upgrade are included in the scope of delivery. Injection moulding machine: Series: SmartPower Machine type: 210/1330 Ljdpfx Aofphtvogzohr Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main machine dimensions Noise level (DIN EN ISO 3744-46) 65 dB(A) Ambient temperature +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours of 1437 hrs. Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max (HLP 32) min 30°C (86°F) / max 40°C (104°F) Oil temperature min / max (HLP 46) min 40°C (104°F) / max 50°C (122°F) Switch-on temperature for oil cooling (HLP 32) 35°C (95°F) Switch-on temperature for oil cooling (HLP 46) 45°C (113°F) Electrical system: Drive power, Hydra. Pump 37kW Motor voltage Frequency Screw barrel temperature 350°C (662°F) max. Water system: Oil cooler: Cooling water connection [...]

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 58211, clamping force: 4,500 kN, The machine is powered and can be demonstrated in working condition. Lhedpfx Asx Af Ayogzsr

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Lhjdpfsx Ng Utsx Agzjr Year of manufacture: 2015 Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Dosage volume: 193 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valve x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by an inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 45 mm Ledpfxjx D Hhao Agzohr Injection pressure 2116 bar Clamping Unit Clamping force 1300 kN Mould height min 275 mm Mould height max 500 mm This Battenfeld HM 1300/750 was manufactured in 2004. It features a clamping force of 1,300 kN, injection pressure of 2,116 bar, and a screw diameter of 45 mm. Equipped with a Unilog CC300 B4 control system, it supports a mold height range of 275 to 500 mm. Consider the opportunity to buy this Battenfeld HM 1300/750 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of construction: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Injection pressure: 2041 bar Metering volume: 653 ccm Clamping unit: Clamping force: 270 t Distance between tie bars: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with horizontal injection units arranged in parallel Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm Injection weight: 446.8 g Injection pressure: 2016 bar Dosing volume: 491 ccm Lhsdox Ng Ugopfx Agzer Dimensions Weight: 15000 kg Length/width/height: 6.90x1.78x2.34 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, Battenfeld EcoPower SE 300/1330 / Electric machine Year of manufacture: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Injection pressure: 2470 bar Metering volume: 540 ccm Clamping unit: Clamping force: 300 t tie bar distance: 770x720 mm size of clamping platens: 1090x1170 mm ejector: electric clamping unit: toggle lever control: UNILOG B6 - touch screen Additional equipment: Lodpsx Ng T Nsfx Agzehr electric machine: high speed, energy saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valve x 8 Control unit with hot runners x6 Injection unit hardened - bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/width/height: 7.20x2.04x2.20m Propulsion: Pumps/motor: 0 kW Heating power: 22 kW Total power: 0 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, Battenfeld HM 300/2250S with robot Wittmann W818 / machine in very good technical condition / operating hours: approx. 40.000 h in automatic mode year of construction: 2007 injection unit: Screw diameter: 55 mm injection weight: 702.5 g Injection pressure: 2500 bar Metering volume: 772 ccm Clamping unit : clamping force: 300 t tie bar distance: 710x630 mm size of clamping platens: 1030x1020 mm Ejector: hydraulic clamping unit: hydraulic Control: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Lhjdpfxex Ng T Aj Agzjr Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear resistant and resistant to corrosion Proportional valve on the injection unit - precise injection In the machine is installed new original screw and cylinder Robot Wittmann W818 4-axis, high-speed robot: 3 axes are driven by servo motors (electric); movement A and C Touch control panel Robot with adapter, protective housing Dimensions: Weight: 13000 kg Length/width/height: 6.90x1.90x2.40 m Drive: Pumps/motor: 45 kW Heating power: 22,7 kW Total power: 67,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request