Used Road Markings for sale (7,825)

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Our machine enables the execution of all basic tasks for road marking. It features a line programmer and also offers the possibility of marking edge lines and adjusting the operator’s seat. The machine can be equipped with up to five automatic spray guns for paint and five guns for glass beads. It has paint tanks with a capacity of 192 kg and two 40 kg tanks for glass beads. Self-propelled machine with its own drive system. Line programmer. Pressure system for applying glass beads. The machine is equipped with: three automatic paint spray guns or one applicator for two-component material; Ljdpez Tdykefx Akqehn three automatic guns for glass beads; one hand gun. Hydrodynamic paint spray system (airless) or dosing system for two-component material in a mixing ratio of 98:2. Two paint tanks, each with a capacity of 60 liters. Pressure system for glass beads with two tanks, each with a capacity of 25 liters. KOHLER drive engine with 25 hp. Hydraulic drive for the paint pump. Paint pump flow rate: 11 l/min. Maximum operating pressure: 228 bar. One nozzle for the hand gun. Three nozzles for marking lines with a width of 12 cm. One nozzle for marking lines with a width of 24 cm. 250 g of oil for the pump piston rod. Three nozzle guards. High-pressure filter with a filter fineness of 50 mesh. Pneumatically raised targeting pointer for aligning the marking. Marking unit mounted on a wheel, which is pneumatically pressed onto the road surface.

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), gearing type: hydrostat, fuel type: diesel, color: white, operation weight: 1,900 kg, axle configuration: 4x2, number of seats: 1, Year of construction: 2003, operating hours: 1,768 h, Equipment: onboard computer, Road Marking Machine: + Euroliners + Trassar 201A + Year of manufacture: 10/2003 + 1,768 operating hours + 1,900 kg + 3-cylinder diesel engine, 36 hp + Hydrostatic drive + Articulated steering + Protective roof + Rear warning device Lhsdpsyhd E Sjfx Akqjn + 2 bead containers of 130 L each + 2 paint tanks + bracket for a third tank on the right + Airless pump + Compressor + Guide rod and spray boom hydraulically adjustable + Machine from municipal ownership Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and changes excepted, subject to prior sale!

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, Year of construction: 1998, Line marking machine: + ProSign + Citadine + Self-propelled – hydraulic – forward and reverse + Airless pump + Line spray gun + Hand spray gun + Honda GX160 engine, 5.5 HP + Year of manufacture: 1998 Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale! Ledpox Ek Tfofx Akqjhn

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: M166011 01 G21C, The LineLazer V 250SPS model with paint guns is a self-propelled solvent painting machine with reflective beads designed for large and heavy striping jobs, including painting parking lots and roadways. Pressurised bead system:  Excellent bead application performance  Ensures proper flow of beads Automatic paint gun system  Quality solenoid driven system Remote control control box  Easy to use and highly visible in all conditions 25 gallon paint tank  Less refills  Extended stripping time with high capacity hopper Honda® GX engine  Reliable and easy to start  Oil alarm stops engine to prevent damage if oil level drops too low Electric start  Quick start EasyMark gun adjustment system  Easy gun adjustments  Easy gun adjustment every time  2 gun capability with QuikSelect gun selector Use of front or rear holster Self-centering front wheel  Simple operation  Foam-filled, three-wheel design for stability Additional features  Easy steering adjustment Lhsdet Dlmbepfx Akqjn  Durable Chromex pump  High efficiency hydraulic motor  High capacity cooling system  Easy Out pump filter

Condition: used, functionality: fully functional, fuel type: gasoline, Marking machine: + Greggory + Spray nozzle Lhsdpfx Akjz Rmkaoqon + Roller scraper + Compressor + Honda motor Receive email notifications for all newly listed vehicles – sign up for our NEWSLETTER! Errors and typos excepted; subject to prior sale!

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: gasoline, Line marking machine: + Graco LineLazer + Euroliners Trassar 8 + Honda GX160 engine, 5.5 hp + Airless pump + Dipstick + Spray gun Receive notifications about all newly available vehicles via email – sign up for our NEWSLETTER! Ljdpjz Rl U Defx Akqshn Errors and typos excepted; subject to prior sale!

Condition: defective spare-parts repository (used), functionality: not functional, power: 6.62 kW (9.00 HP), fuel type: gasoline, color: orange, empty load weight: 175 kg, Year of construction: 1995, Marking machine: + Hofmann + H8-1 + Year of manufacture 1995 + 175 kg + 9.0 HP Honda engine + Engine + Compressor OK Ledpfx Akewkf Eteqohn + Spare parts carrier Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, functionality: fully functional, power: 9 kW (12.24 HP), gearing type: hydrostat, fuel type: gasoline, color: white, number of seats: 1, Equipment: onboard computer, Line marking machine: + Airless pump Speeflo 4900XLT + Bead container Lhedpey H Hg Rsfx Akqen + Self-propelled forward/reverse + Bead dispenser + Line marking spray gun + Hand spray gun with hose + Honda GX390 engine, 12 HP + Line section computer Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, intermediate sale reserved!

Condition: used, functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: white, Year of construction: 1992, operating hours: 4,470 h, Equipment: air conditioning, cabin, Line marking machine: + Euroliners + Bagheera + Year of manufacture: 1992 + 4,470 operating hours + Vehicle base: Hansa APZ 1003H + Optional 4-wheel steering + Hydrostatic drive + 4-cylinder Mercedes diesel engine Lhjdpfew T Tkbox Akqsn + Hand sprayer at the rear + 2x paint tanks + 2x bead tanks + Bead and paint spraying + Sight rod with mirror + Compressor + Airless pump + Line marking computer elexar 20 + Rear warning system + Air conditioning + From municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos may occur, interim sale reserved!

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear Ledpfx Akexal A Ujqehn + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, functionality: fully functional, power: 6 kW (8.16 HP), gearing type: hydrostat, fuel type: gasoline, color: blue, Road marking machine: + Graco + LineLazer IV 250SPS + Paint tank / Bead container + Parallel spray: 2x spray nozzles / 2 bead dispensers + Hand spray unit + Hydraulic drive, self-propelled forward/reverse Lhodpfxew Svqzo Akqon + Airless pump + Honda GX 270 engine, 8.4 HP Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and typos possible, prior sale reserved!

Condition: used, Year of construction: 2011, mileage: 265,853 km, power: 243 kW (330.39 HP), first registration: 01/2011, overall weight: 19,000 kg, fuel type: diesel, color: green, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space volume: 9 m³, Equipment: ABS, air conditioning, Internal vehicle number: G300460 Available immediately at our yard in Kaufungen More information at: Luis Lucena Viktoria Sologubova Mercedes-Benz Axor 1833 4x2 road sweeper VAL?AIR – 9 m³ – 200 bar high-pressure system Mercedes-Benz Axor 1833 road sweeper, manufactured in 2011, featuring a VAL?AIR sweeper body, a 9 m³ debris container, and a high-pressure cleaning system with a pressure of up to 200 bar. The vehicle is equipped with a 330 hp diesel engine, a manual transmission, and air conditioning. Technical specifications: * Vehicle number: G300460 * Vehicle condition: Used * Category: Road sweeper / municipal vehicle * Manufacturer: Mercedes-Benz * Model: Axor 1833 * First registration: 01/2011 * Year of manufacture: 2011 * Mileage: 265,853 km * Fuel type: Diesel * Drive type: Combustion engine * Engine displacement: 7,201 cm³ * Power output: 243 kW (330 hp) * Transmission: Manual transmission * Emissions class: Euro 5 * Environmental badge: 4 (Green) * Axle configuration: 4x2 * Number of axles: 2 * Permissible total weight: 19,000 kg * Unladen weight: 12,625 kg * Payload: 6,375 kg * Color: Green/white Sweeper body: * Manufacturer: VAL?AIR * Debris container capacity: approx. 9 m³ * High-pressure cleaning system * High-pressure output: up to 200 bar * Suction sweeping system * Hydraulically driven rotary brushes * Sweeping unit located beneath the vehicle * Rear discharge via tilting debris container * Suitable for street, area, and municipal cleaning Equipment: * Air conditioning * Manual transmission * Work lights * LED warning bar on the cab * Rear rotating beacon * Striking red and white safety markings * Exterior mirrors with wide-angle mirrors * Municipal vehicle equipment * Steel rims Lhjdpfx Asyfy Anekqsn Inspection and functional testing are possible after prior arrangement. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: new, functionality: fully functional, color: green, brakes: other, gearing type: other, emission class: none, suspension: other, Year of construction: 2026, mast type: other, Equipment: low noise, TICAB Manufacturer Road Painting Machine for Professional Marking Applications The TICAB road painting machine is designed to provide efficient and accurate marking solutions for modern infrastructure needs. This professional road striping equipment allows contractors and maintenance specialists to create clear and durable markings on highways, urban roads, parking areas, airports, industrial facilities, and other paved surfaces. Key Benefits: ✔️ Suitable for lane separation, parking layouts, and traffic guidance markings ✔️ Excellent choice for construction companies, municipalities, and road service providers ✔️ High-quality road striping equipment for professional projects ✔️ Accurate paint distribution and consistent marking lines Lhodpfx Akox U Arfoqsn ✔️ Simple operation with minimal maintenance requirements ✔️ Heavy-duty design for regular and intensive use Suitable Applications: • Highway and street marking • Airport surface marking • Pavement painting projects • Industrial area marking • Lane separation lines • Parking lot striping The TICAB professional marking machine helps improve work efficiency, reduce application time, and achieve precise, long-lasting road markings for various construction and maintenance tasks. Contact us for product specifications, commercial offers, and international delivery solutions.

Condition: excellent (used), Year of construction: 2012, operating hours: 2,091 h, lifting height: 5,550 mm, free lift: 1,800 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), gearing type: automatic, fork length: 1,200 mm, total height: 2,850 mm, total length: 3,700 mm, total width: 2,100 mm, color: blue, Very nice 2012 MANITOU M50-4 T 3-E3 4x4 rough terrain forklift (4x4) with triplex mast, side shift, 4-cylinder Perkins diesel engine, mast height: 5,500 mm, only 2,092 operating hours (last serviced at 2,047 hours) + complete set of off-road tires. = Further Information = Lhjdpfsy Apafex Akqen General Information Year of manufacture: June 2012 Model year: 2011 Registration number: TNG-03-R Driveline Drive: Wheel Weights Unladen weight: 8,040 kg Operational Mast height: 5.5 m Lifting capacity: 5,000 kg Overall height: 285 cm CE marking: yes Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), functionality: fully functional, power: 110 kW (149.56 HP), Year of construction: 1991, machine/vehicle number: 105039, excellent condition Lsdpfx Aj Abpixokqohn

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Z85Y55J, Year of construction: 1990, load capacity: 9,000 kg, lifting height: 3,285 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Caterpillar, overall weight: 12,260 kg, color: yellow, Equipment: 3rd hydraulic function, cabin, hydraulic fork positioner, lighting, pallet forks, - Caterpillar - VH6 200 - Year of manufacture 1990 - Caterpillar 3208 engine Ledez S Imxepfx Akqohn - Hydraulic fork positioner - 22,900 hours recorded - Duplex mast - Good condition - Fully enclosed cabin - V8 diesel engine

Condition: used, mileage: 1,682 km, power: 153 kW (208.02 HP), first registration: 11/2025, overall weight: 8,300 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 11/2026, gearing type: mechanical, emission class: euro6, total length: 6,600 mm, total width: 2,550 mm, total height: 2,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until conclusion of the sale, subject to errors, typographical errors, and prior sale: DAF XB 210 street sweeper with Brock superstructure (Chassis 20) First registration: 17.11.2025 1,682 km 58.33 operating hours Engine: 4,460 cc 152 kW / 210 hp Euro 6 Permissible total weight: 8,300 kg Unladen weight: 7,440 kg Payload: 890 kg Overall length: 6,600 mm x overall width: 2,550 mm x overall height: 2,800 mm Lhodjz Rktropfx Akqjn Wheelbase: 3,150 mm, overhang: 1,730 mm Brock sweeping technology, type VS4 Manual gearbox, 6 gears + hydrostatic drive 110 L fuel tank, 20 L AdBlue tank Plus warranty up to 200,000 km / 3 years from first registration Daytime running lights Day cab with tinted windows Radio/CD 2 x electric windows, mirrors, mirror heating 2 x LED rotating beacons on the cab roof Rearview camera Central locking with remote control Luxury driver's seat, armrest on the passenger seat ECAS remote control, 10-year subscription for Paccar Connect from first registration DAF infotainment system with USB/Bluetooth ACC (adaptive cruise control) and FCW (forward collision warning) and AEBS-3 emergency braking assistance system, DPA (driver performance assistant), lane change warning system, VSC (electronic vehicle stability control) Rear axle SR5.13 (single-driven rear axle) Tires: 225/75R22.5 Good Year, approx. 90% remaining, with tire pressure monitoring Air suspension at the rear, leaf spring suspension at the front Exhaust brake Superstructure: Compact sweeper VS4 with hydrostatic drive HT 400 Hydrostatic drive OMSI HT 400 Dirt container: 4 m3, dirt container + water tank made of stainless steel, slide valve on the dirt container Shut-off valve opens during reverse driving Exhaust air distribution upwards, inspection flap on the right, wastewater drain valve 3" Sweeping unit on the right with a disc brush Roller brush 4 x rotating beacons in LED Pneumatic residual water disposal Camera system Waeco Dometic with 7" monitor and 3 cameras, Camera 1: rearview camera, Camera 2: sweeping unit on the left, Camera 3: sweeping unit on the right LED work lights for the weed brush Weed brush, adjustable left/right, with chain drive Sweeping unit on the left with a disc brush VS4 and LED work lights Disc brush can be extended and retracted continuously during sweeping, pivoting roller brush, hydr. inclination adjustment of the outer disc brush, washing kit 150 bar incl. hose reel, hand spray gun with lance, hose length 15 m Water bar on the ram with additional pump VS4 Leaf suction system VS4 on the container roof Fine adjustment valves for water in the cab VS4 Price: € 215,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties for disputes up to € 10,000 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: good (used), functionality: fully functional, machine/vehicle number: 100568, Year of construction: 1998, operating hours: 5,169 h, load capacity: 3,500 kg, fuel type: diesel, mast type: duplex, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), overall weight: 6,080 kg, Equipment: pallet forks, - Komatsu Lhjdpfx Aezcwx Iekqjn - FD35T-7 - Duplex mast - 3500 kg lifting capacity - 6-cylinder Isuzu engine - Fully functional

Condition: used, New: Yes Year of construction: 2024 Lsdoz S Dr Depfx Akqohn

Condition: used, Year of construction: 2012, mileage: 130,000 km, power: 169 kW (229.78 HP), first registration: 12/2012, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2028, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Internal Vehicle No.: G400124 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Scania G230 4x2 Road Sweeper Scarab Magnum | Weed Brush | Euro 5 For sale: a used Scania G230 4x2 road sweeper with a Scarab Magnum body, manufactured in 2012. The vehicle is equipped with a 230 hp diesel engine, air conditioning, and rear-wheel drive. During normal road operation, the vehicle is driven via a manual gearbox. For sweeping operations, a hydrostatic drive system is available. The equipment includes, among other things, a right-hand sweeping unit, a weed brush at the front of the vehicle, a rear suction system, and a high-pressure pump with a lance. Technical data of the vehicle: * Manufacturer/Model: Scania G230 * Vehicle type: Road Sweeper * First registration: 12/14/2012 * Year of manufacture: 2012 * Total kilometers driven: approx. 130,000 km * Kilometers swept: 65,868 km * Engine operating hours: 14,239 hrs * Power: 169 kW (230 hp) * Engine displacement: 9,290 cm³ * Fuel: Diesel * Transmission for road operation: Manual gearbox * Drive system for sweeping operation: Hydrostatic * Emission standard: Euro 5 * Environmental badge: 4 (Green) * Number of axles: 2 * Wheel formula: 4x2 * Driven axles: 1 * Drive: Rear-wheel drive * Permissible gross weight: 18,000 kg * Unladen weight: 9,490 kg * Payload: 8,500 kg * Overall length: 6,700 mm * Width: 2,550 mm * Height: 3,250 mm * Air conditioning * Color: Orange * TÜV (technical inspection): New * Vehicle number: G400124 * Condition: Used * German vehicle Technical data and equipment of the superstructure: * Manufacturer/Model: Scarab Magnum * Operating hours of the road sweeper superstructure: 11,587 hrs * Sweeping water tank: approx. 1,200 liters * Hydrostatic drive system for sweeping operation * Sweeping unit on the right-hand side * Weed brush at the front * Suction system at the rear * High-pressure pump with lance * High-pressure nozzle for cleaning the turbine * Rear camera Ljdpfxey N H Dhe Akqehn * Side camera * Running boards at the rear * Front and rear warning lights * Two rotating beacons on the vehicle roof * One rotating beacon at the rear left of the container Inspection and functional testing possible after prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: good (used), fuel type: diesel, Year of construction: 2007, operating hours: 719 h, Ammann AV26-2 Vibratory Roller / Road Roller / Tandem Roller 2007 Yanmar Diesel 719 Hours A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). Lodps Aaywwsfx Akqehn You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, functionality: fully functional, machine/vehicle number: E1X353T01755, Year of construction: 2007, operating hours: 9,557 h, load capacity: 7,000 kg, lifting height: 3,150 mm, fuel type: diesel, battery manufacturer: Linde, DGUV certified until: 08/2027, fork carriage width: 150 mm, fork length: 1,200 mm, color: red, Equipment: CE marking, cabin, full service history, head guard, lighting, sideshift, The forklift is fully functional. Location: AT-6751 Braz, Klostertalerstr. 27. Lhodpfx Asz Hun Dekqon

Condition: used, Year of construction: 2009, operating hours: 6,787 h, Equipment: all wheel drive, Crushing plant with transport chassis approved for road traffic ----Feed hopper & pre-screening: Hydraulically folding hopper: A 6.5 m³ feed hopper with lockable rear and side walls. The hopper walls can be quickly lowered for transport. * Vibratory feeder (vibrating trough): A robust heavy-duty trough ensures uniform material feed into the crusher. * Grizzly pre-screen: An integrated screen separates fine particles and sand before the crushing chamber, minimizing wear on the crushing jaws and increasing throughput. ----Crushing unit: High-performance jaw crusher: A generous inlet opening of 1,200 x 750 mm. Lhjdo Aa Hr Uepfx Akqsn * Hydraulic drive: The crusher is hydraulically driven, allowing for trouble-free starting under load and a reverse crushing function to clear blockages in a material-friendly manner. * Wedge gap adjustment: The stepless hydraulic adjustment of the CSS (closed-side setting) allows for quick adaptation to the desired final grain size. ----Conveyor systems & material separation: Main discharge belt: An extra-long, 1,000 mm wide conveyor belt with a high discharge height. It can be hydraulically lowered for maintenance or transport. * Side discharge belt (bypass): A folding conveyor belt transports the pre-screened fine material (e.g. soil/sand) to the side. * Overband magnet: A powerful permanent magnet above the main belt automatically removes reinforcing steel, bolts and metals from the crushed construction debris. ----Drive & control: Diesel engine: A Caterpillar C-9 diesel engine with 261 kW (355 hp) provides the hydraulic main drive. * Central control panel: Monitors all important machine parameters (oil pressure, engine temperature, belt speeds) and enables control of the core functions. * Remote control: Allows the excavator or wheel loader operator to control the plant directly from the cab (e.g. start/stop the vibratory feeder). ----Maintenance & mobility: SKF central lubrication system: Automatically lubricates the main bearings of the crusher during operation, drastically reducing manual maintenance effort. * Track chassis: A stable chain chassis ensures excellent off-road capability directly at the job site. * Maintenance platforms: All-round walkways with handrails guarantee safe access to the engine and crusher. ----* Crushing chamber (inlet): 1,200 x 750 mm * Engine: Mostly Caterpillar diesel engine (CAT C-9) ----Transport dimensions: * Length: approx. 14.6 m * Width: approx. 2.8 m * Height: approx. 3.3 m ----Equipment: * Vibratory feeder with grizzly screen * Overband magnet for the separation of reinforcing steel (construction debris) * generous maintenance platforms and folding hopper corners. * 3-axle transport chassis -----Vehicle number 12571 ----Errors and prior sale excepted

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m Leds Ad Simopfx Akqohn surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: BS-21012, For sale: LASERVALL laser system with a rotary indexing unit (C-axis) - Type: Laservall PH70 - Model: BOX SOL – OWIO 20 EMK - Serial No.: BS 21012 - Year of manufacture: 2021 Ljdpez Iytzsfx Akqshn - Power: 23 W The laser enables marking on various materials, including metals, plastics, ceramics, glass, and stone. It allows for marking on both flat and cylindrical surfaces, as it is equipped with a rotary indexing unit featuring a three-jaw chuck and a simultaneously controlled C-axis. All electronics, the entire software system, and the laser tube were replaced in 2021. The unit has seen very little use and is practically new. It is connected to the power supply and ready for operation.