Used Rotary Mower for sale (3,814)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 1 h, working width: 4,800 mm, color: green, empty load weight: 3,000 kg, operation weight: 3,000 kg, machine/vehicle number: S241480, Equipment: hydraulic folding, lighting, Spearhead Multicut 480 Military Demo machine, year of manufacture 2024 Djdpfjx R Uuwex Abhjup Machine designed for grassland maintenance. However, it can also be used on other surfaces, such as fallow land, maize and rapeseed stubble, etc. Extra heavy-duty military specification. Required power – depending on crop density – ranges between 100 and 200 hp (73 – 147 kW). The Power Drive transmission system is rated for continuous power of up to 225 hp (165 kW). The combination of the unique cutting system with MultiCut blades and rotor ensures a very clean cut and optimal distribution of the cut material. MODEL: MULTICUT 480 Military Working width: 4.60 m Transport width: 2.80 m Length: 4.50 m Minimum power requirement: 100 hp (73 kW) Drive system: Power Drive Maximum load: 225 hp (165 kW) Capacity: 3-6 ha/h Number of rotors/blades: 3/18 MultiCut Slip clutch: 3 units, four-disc clutches Blade speed: approx. 80 m/sec Rotor overlap: 150 mm Operating angle: +90° / -20° Cutting height range: 25-400 mm Wheels: 8 units, 6.00 x 9 Support skids: 4 units Number of supporting discs: 3 units Parallel height adjustment: standard Deck protection ring/guide plate: standard Lighting: standard Tandem axle centre section: standard GAS SPRUNG FOR TRANSPORT 7-YEAR WARRANTY ON TRANSMISSION

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Five rotors cover 7.3 meters in a single pass. Dujdexlf N Sepfx Abhop Easy to clean thanks to the monocoque design. Precisely set your cutting height for maximum performance.

Condition: new, functionality: fully functional, ✅ New stock ✅ Immediately available ✅ Shipping possible The SCHORR Disc Mower RR580KRM is a powerful high-grass mower, designed to cut through dense, tall grass and brush with ease. With a working width of 58 cm, it allows you to quickly maintain meadows, roadsides, and orchards. The disc mowing system features four freely swinging blades, ensuring an even and high-quality cut. The swath deposit with a removable swath cloth enables clean handling of cut material without mulching. The RR580KRM is self-propelled and easy to operate—even on slopes or uneven terrain. Its wheel freewheel system allows for agile maneuvering, and mowing drive and wheel drive can be engaged separately. Applications: • Orchard meadows & grassland with tall vegetation • Roadsides, embankments, ditches, and fence lines • Fallow ground, border strips around farmyards, riding arenas, or storage areas Even on slopes of up to approx. 30%, the disc mower stays on track and provides a consistently high-quality cut. The swiveling, ball-bearing glide disc and flexible V-belt drive ensure smooth, low-vibration operation and reduced maintenance requirements. Ergonomics & Transport: The handlebar is height-adjustable and foldable, ensuring comfortable operation and space-saving storage. Weighing around 65 kg, the RR580KRM combines a sturdy build with agile handling. Technical Data: Manufacturer: SCHORR Model: RR580KRM Engine: Air-cooled, single-cylinder four-stroke, 6 HP Drive: Self-propelled Blade type: Freely swinging blades, 4 pieces Dedpfx Aoxvb Ryebhsup Weight: 65 kg Dimensions: Length 1070 mm, Width 570 mm, Height 840 mm Cutting height: approx. 30 mm Cutting width: 580 mm Spare parts are always available and our service team is ready to assist with any inquiries. Delivery or collection in 48465 Schüttorf is possible, collections strictly by prior arrangement. Financing or leasing options are also available – our team will be happy to advise you on the different options. The RR580KRM is immediately available, robust, agile, and ideal for both professionals and private users.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. Dujdpfx Abjq Nfuzehjp 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. Duedsq Igyvspfx Abhop - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Dusdpfx Abjfvqmxohjp Hydraulic

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. Dedoq Nyzbepfx Abhsup The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: not inspected (used), functionality: unexamined, overall weight: 70 kg, table diameter: 250 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Table diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 330 x 200 mm Weight: 70 kg Dsdpfsyr Nk Ijx Abhoup External reference: Lot 74

Year of construction: 2009, condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available Dsdpfsl D T D Tsx Abhjup CEE machine, incl. complete documentation

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Dujdpfx Absyrnkashep Grinding wheel width 80 mm

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. Dedpfx Aeymmqzobhjup FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Djdpfx Asxpggyobhjup Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg

Condition: used, Year of construction: 2003, machine/vehicle number: M317, Technical Specifications & Performance DataThis ACMA rotary filling monoblock integrates a precision filler and capping unit with an automatic cap sorter, delivering reliable throughput for liquid detergent production and industrial packaging applications. As a second hand solution ideal for a used bottling line, it combines compact footprint with robust engineering.Manufacturer: ACMA (Corniani division) Model: RCCA-1562 Manufacturing year: 2003 Production speed: up to 105 bpm depending on format Format performance: 0.45L: 95–100 bpm; 0.5L: 100–105 bpm Compatible formats: 0.45L, 0.5L Container handling: Designed for PET and Glass bottle handling (with appropriate change parts) Electrical supply: 380 V, 50 Hz, 10 kW Auxiliary circuits: 24 V Pneumatic pressure: 6 barAdvanced Automation & Control SystemsThe monoblock features rotary motion for steady, synchronized bottle transfer between filling and capping stations. The integrated cap sorter ensures consistent cap orientation and feeding to the capping heads, supporting sustained high-speed operation. Standard industrial control architecture enables precise timing, smooth acceleration curves, and consistent torque application during capping.Automatic cap sorting and feeding to the capperCoordinated filler-capper synchronization for stable continuous flowIndustrial control logic for accurate cycle timingOperator-friendly interface and routine changeover adjustmentsElectrical protection and auxiliaries matched to 24 V control circuitsProduction Line Integration CapabilitiesThis filling monoblock integrates seamlessly within a complete used bottling line. It can operate inline with upstream bottle preparation equipment and downstream inspection, labeling, and packaging machinery. Format changes between 0.45L and 0.5L are supported with the correct set of format parts.Standalone or inline operation with conveyorsInterfaces readily with labeling, inspection, and end-of-line packaging systemsSuitable for liquid detergents, household cleaners, and similar chemical products when configured accordinglyFlexible container materials subject to starwheel and guide change partsMachine Condition & Maintenance HistoryOffered as a second hand rotary filling monoblock, the unit presents defined performance data for 0.45L and 0.5L formats. It is positioned for quick recommissioning in an industrial packaging environment, with capacities appropriate for medium-speed production. Availability and readiness support rapid deployment in existing lines.Operational Performance & VersatilityWith speeds up to 105 bottles per minute, this ACMA monoblock is engineered for consistent fill accuracy and secure closure application. The integrated sorter enhances capping efficiency and minimizes misfeed-related downtime. The rotary platform supports smooth bottle handling, reducing scuffing and maintaining presentation quality across PET or glass bottles when equipped with the correct handling parts.Stable rotary handling for reduced container stressHigh capping reliability supported by integrated sortingAdaptable to multiple home care and chemical categories with appropriate componentsBalanced... Duedpfx Aboyr Hu Dehsp

Year of construction: 2018, condition: excellent (used), 2x pallet wrappers, Rotary semi-automatic rotary arm stretch wrapper, Robopac – used - : Price per unit ex location: only €8,500 (net)! Manufacturer: Robopac Type: Rotary Arm Model: Rotary 508 PDS Year of manufacture: 2018 Height to lower edge of rotary arm: approx. 2.48 m Rotary range: approx. 1.60 m inner diameter Djdpfx Aboyrq D Nsheup Depth with arm: approx. 4.20 m Machine height: approx. 3.50 m 230V, Net weight: approx. 770 kg Condition: good Available: immediately Location: Erfurt, later warehouse Augsburg Item 23 / 33

Condition: excellent (used), Motor-driven rotary shift table Dsdeif Rlbspfx Abhjup Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: excellent (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centring hole: 100 H6 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm The displacement is measured via a ROD 250 rotary encoder. Condition: Very good (used) Optionally with machine bed (travel = 2000 mm ) About us: Dsdpfsfk R Tdex Abhsup MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Dedsxgty Uopfx Abhsup Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips Duedexgr Svspfx Abhsp With free shaft end, without drive Condition: unused

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003585 - Manufacturer Code: 205367 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, please contact us. 1KG - 20X20X20 Djdpfx Asyrn Ufebheup

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Dsdpfx Aew R Syisbheup

Condition: excellent (used), Year of construction: 1991, For sale a screening bucket of the renowned Van Dalfsen brand, model HPL 2000 SP20. Specification: • Type: Screening bucket (rotary) • Model: HPL 2000 SP20 • Drive: hydraulic • Working width: approx. Duedpjwpl Rmefx Abhep • Technical condition: good, functional • Ideal for screening soil, compost, rubble, stones, etc. - Solid construction, ready to work - Suitable for excavators, loaders.

Year of construction: 2002, condition: used, Balpe SAS Dujdpfx Abob Uanqshep model: 9PL/20 serial: 88 Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm Djdpjx Urqwofx Abheup 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. Dedsx Urqdopfx Abheup For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9349-0010, Used: rotary hearth furnace / mandrel hardening press Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Dsdpfjw Rrxfjx Abhjup Year of manufacture: 2012 Max. temperature: 950 °C GAS