Used Rotary Machine for sale (83,770)

Year of construction: 2016, Condition: excellent (used), 1 x Ilpra Rotary Pot Fill and Seal Machine Type: Fill Seal FS5000 Giolhcdwjwv Smhs Hjw Year: 2016 Located in Melksham, Wiltshire

Condition: good (used), Year of construction: 1993, Rotary table surface grinder, surface grinder, Sumitomo SVR125, used machine Overall dimensions: 4200 x 2300 x 2800 mm Year: 1993 Weight: 6300 kg Control: Fanuc With emulsion management Power: 44 kW Gelhcjqi Aimodw Hjiw Magnetic table diameter: 1250 mm Magnetic table capacity: 1400 kg Magnetic table rotation speed: 5-25 rpm Grinding wheel diameter: 660 mm Grinding wheel speed: 720 rpm Feed speed: 1-300 mm/min

Year of construction: 1988, Condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Year 1988 Giolhcdsdg Da Iow Hew Pristine Condition Not been used for 15 years

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t Gielju Su Apjhcdw How dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: refurbished (used), Year of construction: 1989, Functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Gielhcdwswugh Ds How Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Condition: new, rotary table diameter: 600 mm, grinding height: 400 mm, workpiece weight (max.): 500 kg, Good day, this concerns a machine that is currently in production. Rotary table: ø 600 mm Maximum processing diameter: ø 600 mm Maximum table load: 500 kg Grinding height: 400 mm Gislswy N T Tohcdw Hsw Wheel spindle: 7.5 kW (we can change this, but a new spindle head would need to be supplied) Grinding wheel: ø 400 mm Table: hydrostatic Table motor: torque motor Regarding the rotary table: The machine was designed with a hydrostatic system and torque motor. If the potential customer does not require this, we can switch to a classic gearbox with motor, but as with the spindle, some modifications would be necessary (ideally, we would prefer to keep the existing configuration). Electromagnetic chucks: We usually use SPD, and we are satisfied with them, but if the customer prefers a different make of chuck, that is possible to choose, as I haven't purchased them yet. CNC: As mentioned, the machine is equipped with Fanuc controls, and for us, it would be best to keep Fanuc, but if required, we can supply other CNCs; however, the price will change slightly. Coolant system with paper and magnetic filter: The original customer does not require this as they have a centralized system in their factory, but we can provide it without any problem (this would be at an additional cost to the indicated price).

Condition: excellent (used), Year of construction: 2014, Rarely available for sale, GEA Comas Tartomatic 1000 in beautiful condition. Has not been used very much. Comes with many accessories as shown in the photographs. Golhcdwevd Elns Hsiw

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts Golhcdsgd D U Ejw Hsiw - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: refurbished (used), Functionality: fully functional, rotary table diameter: 600 mm, grinding height: 300 mm, disc diameter: 400 mm, grinding diameter: 600 mm, Manufacturer: ELB-SCHLIFF Model: SWR 50 T Overhauled: 2008 Delivery time: immediately Gslhcdwou Ed Nlo Hsiw Grinding area: Ø 600 X 300 mm Grinding wheels: max. Ø 400 X 100 x 127 mm Spindle cone: 60 mm Installation dimensions: approx. 2800 X 2800 X 2300 mm L/W/H Total weight: approx. 5000 kg

Condition: used, Year of construction: 1963, Functionality: unexamined, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 units Station 1 – Loading and unloading Gslowyn S Ujhcdw Heiw Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread-cutting unit Feed of the drilling units: mechanical feed via quill Drilling heads: single-spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: • The machine is designed for large-scale production • The machine features a sturdy machine table with chip discharge to the underside of the table center with a separate large coolant tank • Extensive set of clamping and auxiliary devices included • The machine is equipped with a 6-station rotary indexing table

Condition: used, Year of construction: 1979, Functionality: fully functional, drill diameter: 25 mm, For sale: Hydromat HW25, fully retrofitted in 2006. 12 positions. In working condition. Tapping unit, part rotating unit. Filter, chip conveyor, and bar feeder included. Some collets and a cabinet with spare parts are also sold with the machine. Giolowxff Aehcdw How Make me a good offer, price is loaded onto your trailer.

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Gijlhcedtq Anodw Hjw

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Giolherdzbtscdw Hjw

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Gslhcdedzp U Ijw Hoiw Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, Year of construction: 2010, rotary table diameter 800 mm grinding diameter 1100 mm grinding height max. 1100 mm workpiece rotation diameter 1100 mm max. table load 2000 kg weight of the machine ca. 18 t dimensions of the machine ca. 6 x 4 m Vertical KEHREN grinding centre Ri 8-4 grindturn (CE compliant), with 3 grinding spindles and a turning tool holder for external and internal cylindrical grinding and hard turning in ONE clamping. Equipment / Accessories: - SIEMENS Sinumerik 840D SL control - spindle 1, 0° (-5°): Turning tool holder, CAPTO C 6 interface - spindle 2, 90°: Reinforced construction with direct drive and external taper for internal and external cylindrical grinding TSEV 140 x 500 - diameter 140 mm - grinding height 650 mm - plunge depth 600 mm - grinding wheel, e.g. 250 x 60 x 76 mm - power 20 kW - speed 1500-4500 rpm - spindle 3, 180°: High-frequency spindle with hybrid bearings, direct drive and short tool taper, for grinding internal and external diameters HSP 170-18000 - diameter 170 mm - grinding height 950 mm - plunging depth 150 mm (with standard grinding mandrel 150 mm) - tool holder HSK-C 63 - grinding wheel depending on application - power 20 kW - speed 3000-18000 rpm - spindle 4, 270° (+5°): Reinforced construction with belt drive and external taper, for flat grinding TSAV 1200 x 400 - diameter 120 mm - grinding height max. 1100 mm - grinding wheel 400 x 60 x 127 mm - power 15 kW - speed 1500-4500 rpm - turret head (B-axis) - positioning: helical gear with 360 teeth and hydraulic tension - smallest incremental movement 1° - swivel range 280° - grinding head adjustments (Z-axis) - feed 0.01-6000 mm/min - rapid traverse 10 m/min - cross movement of the slide (X-axis) - feed 0,01-6000 mm/min - rapid traverse 20 m/min - rotary table with direct drive (C-axis) - round table diameter: 800 mm - drive system AC synchronous direct drive - speed 0.01-200 rpm - set-up speed 1-10 rpm adjustable - table load max. 2000 kg - automatic gravity belt filter system: tank volume 1000 l, flow rate 200 l/min - immersion cooling unit for maintaining a constant coolant temperature, cooling capacity approx. 5000 kcal/h - grinding mist extraction for connection to the closed workroom, capacity 1200 m³/h - additional dressing spindle for dressing vertically arranged grinding wheels with ceramic bond - RENISHAW swivel measuring device for measuring bores, external diameters and flat surfaces Gielhcswrtiiedw Hew - console for calibrating the measuring probe to the left of the rotary table, with T-slots - semi-automatic balancing electronics with vibration sensor and speed sensor - additional grinding wheel holders for spindle 2, spindle 3 (arbor) and spindle 4

Year of construction: 2021, operating hours: 600 h, Condition: good (used), Functionality: limited functionality, For sale is a 2-lane filling system for cream cheese and yoghurt. We used it to fill cups with a volume of 120 ml and 155 ml. The machine consists of: - Pre-filler - Main filler - Cup placing station - Fruit filler - Herb filler - Oil filler Gislhcdwevz Am De How - Slip lid station - CO2 gassing - Sealing station - Cup lifter Output of up to 3000 cups/hour. Cleaning via CIP. Dimensions Length 180cm Width 160cm Height 280cm plus mixer.

Condition: ready for operation (used), Year of construction: 1999, There are 4 almost identical Pfiffner CNC rotary transfer machines available. Years of construction: approx. 1999, control: Siemens S5/Siemens HME, stations: 12, process: sawing/feed/turning, operating hours: approx. 8500 hours: Sawing/feed/turning, operating hours: approx. 85383. Including loader, switch cabinet, chip conveyor, cooling lubricant system and a total of approx. 35 processing units. Documentation available. On-site inspection is possible. The machines are dismantled and stored, but it is possible to see similar machines in operation. One machine is incomplete and suitable as a spare parts carrier. Gjlhcdwswv Um Ds Hsiw

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, rotary table diameter: 1,000 mm, table diameter: 1,000 mm, CNC rotary table grinding machine with 1000 mm magnetic chuck, turret carrier with 3 grinding spindles (external, face, and internal grinding spindle). CNC control Sinumerik 840C, Simodrive 611 drives, coolant tank, currently still in operation, now being dismantled. Delivery also possible as overhauled and with new electrics upon agreement. Total weight 20,000 kg. Geljwv Sc Aohcdw Heiw

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 1700 mm Measurements depth 3000 mm Machine weight 8200 kg Clamping Unit Clamping force 200 tons This Engel Insert Rotary 200V/100 was manufactured in 2015. It's a vertical injection moulding machine featuring dimensions of 3000x1700mm and a weight of 8200 kg. With immediate pickup availability, consider the opportunity to buy this Engel Insert Rotary 200V/100 vertical injection moulding machine. Contact us for more information. Application Types Gjlhcjwttt Rjdw Heiw Injection Moulding

Condition: used, Year of construction: 1995, CAMAM GC6/6F-2L rotary milling machine Gslour Htlohcdw Hsiw Number of milling units 6, grinding units 2 Maximum width of material 250mm The maximum height of the material 150mm Maximum length of material 1200mm Feed speed adjustable 0-17m/min Machine in the cabin

Condition: like new (used), ROLLMAT - Roll Die Cutting Machine Key Features: - Fast setup – ready for box production in seconds Gislhjwvidqjcdw Hsw - 150 tons of punching force for various materials - Compatible with conventional wooden die-cut tools - Mitsubishi PLC control with three modes: single, dual, and automatic transfer - High flexibility – processes corrugated board, fiberboard, plastics, foam and more - Durable and reliable – built to high Zemat TG standards - Manual, semi-automatic, and automatic operation - Safety features – automatic stop, safety doors, and acoustic alarms Applications: - Packaging: die-cut boxes, inserts, blister packs - Materials: corrugated board, solid board, plastics (PVC, PP, PET, PE, HDPE) - Foams: various densities up to 100 mm thickness - Other industries: leather, nonwovens, stationery Additional Features: - Working table widths from 800 – 2500 mm - Auto-stop after transfer on both tables - Programmable cycle control for greater efficiency - High-durability polymer-coated upper roller - Optional table extensions available - Custom machines and tooling on request CE/UL certified – compliant with industrial standards

Condition: used, Technical details: table diameter: 1400 mm x-travel: 2200 mm y-travel: 1200 mm z-travel: 1100 mm c-axis: 360.000 x 0,001 b-axis: +/- 60 ° w-axis: 350 mm distance spindle center to column:: 1100 mm table load: 6 t spindle drive: 15 kW Torque: 4600 nM spindle turning speed range: 10 - 1600 U/min spindle taper ISO: 50 no. of tools in the magazine: 20 Stück total power requirement: 45 kW Giolhcjvb Dwdodw Hew weight of the machine ca.: 30 t dimensions of the machine ca.: 5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEMENS 840 D control for 6 axis - tool changer for 20 tools - spindle quill 350 mm as W-axis - rotary table as C-axis - angualar milling head indexable - oil cooler, chip conveyor, hand operating panel. *

Condition: used, Year of construction: 2012, Industrial blasting machine made of metal. Cleaned condition with minor signs of use. Accessories: control panel, collection container, replacement filter. Next inspection: 9/2025. Details: | Model: RF 70/2 | Serial No.: 63383 | Power supply: 400 V, 50 Hz | Filter type: Cartridge filter | Cleaning system: Automatic | Control Panel: Integrated with status indicators | Operating hours: 21,532 hours (as specified) Gijlhcdwswpgzyj How

Condition: like new (used), Year of construction: 2014, DELTA LC 400 - Year of manufacture 2014 -CE marking -Year 2014 -Magnet - diameter 400mm / Two speeds 20/40 rpm -Grinding diameter 400mm -Grinding height 220mm Gijlhcdswr T Hnow Hsw -Height adjustment with handwheel -Fine adjustment 0.01mm -Distance axis/column - axis/grinding wheel 315mm -Speed - grinding wheel 2840 rpm -Grinding wheel 200x80x78mm -Spindle motor 3 KW -Lateral dressing device with dressing diamond -Coolant system -Machine enclosure -Connection cable -Machine documentation Dimensions: LxWxH 1.2x1x1.8 meters / weight 750Kg Errors and input mistakes excepted

Condition: good (used), DELTA LC 400 - Rotary Table Surface Grinder -Grinding diameter: 400 mm -Grinding height: approx. 220 mm -Speed range: 2850 rpm -Grinding wheel dimensions: 200 x 80 mm (corundum) Gelhcdwswfxtte Hjiw -Height adjustment via handwheel -Fine adjustment via handwheel -Drive power: approx. 3 kW -2 emergency/stop switches -Coolant system -Machine enclosure -Documentation Dimensions: L x W x H 1.1 x 0.8 x 1.8 meters / Weight: 750 kg Errors and input errors excepted