Used Router for sale (362)

Condition: new, Table router HOLZKRAFT t 45c LL With table extension right and left, and extendable workpiece support Ksdpeu U Rfpofx Abvsdn ----- Technical data ----- Table size: 1,945 x 695 mm, max. spindle projection over table: 130 mm, Useful length of milling spindle: 100 mm, max. retractable milling cutter Ø: 180 mm, Speeds: 3,500 / 7,000 / 10,000 rpm, Motor 400 V: 6.6 HP / 5.0 kW, suction nozzle Ø: 2 x 120 mm - Special offer price - - new exhibition machine -

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions Ksdpfx Abezc E A Ievedn MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: used, machine/vehicle number: 008362, X axis working area: 3200 mm Y axis working area: 1600 mm Kdedpfx Aox A Tl Aobven Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 32 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008340, X axis working area: 4400 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Kdedpoy Nkpnjfx Abvjn Number of controlled axes: 5 axes Total number of drilling spindles: 36 Total number of tool changer positions: 30

Condition: used, machine/vehicle number: 008480, X axis working area: 4600 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 5 axes Total number of drilling spindles: 31 Total number of tool changer positions: 58 Ksdpfxsy Edqke Abvsdn

Condition: used, machine/vehicle number: 008184, X axis working area: 8185 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Kedsyxmv Nopfx Abvsdn Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: good (used), Code: 0309 Brand: COSMEC Model: KV 1000/C Kodpfxoylpp De Abvsdn Copying Router Technical data: Clearance from upright to spindle center mm 1000 Spindle vertical run mm 115 Spindle speed : 12000/18000 rpm Worktable dimensions mm 900 x 1000 Overall dimensions: mm 1850 x 1050 x 1800 h Weight kg 1000

Year of construction: 2025, condition: like new (used), functionality: fully functional, 2025 BCAMCNC 5 Axis CNC Router – Like New, Never Used For sale is a 2025 BCAMCNC 5 Axis CNC Router, installed but never put into production. This machine is in as-new condition, making it an excellent opportunity to purchase a state-of-the-art 5 axis router without the lead times or cost of a brand-new unit. The BCAMCNC 5 Axis Router is designed for high-precision machining of complex parts, ideal for industries such as aerospace, automotive, furniture, marine, signage, mould making, and advanced composites. ✅ Key Features & Benefits 5 Axis CNC machining – full simultaneous interpolation for complex 3D parts Like new – installed but never used Heavy-duty welded frame for stability and long-term accuracy High-speed spindle for efficient cutting across a wide range of materials Automatic tool changer (ATC) for maximum productivity User-friendly CNC control with advanced software integration Vacuum table for secure workpiece holding Perfect for wood, plastics, composites, foams, aluminium and non-ferrous metals 📐 Technical Specifications (2025 BCAMCNC 5 Axis CNC Router) Table Size: 3000 × 1500 mm X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 1200 mm A-Axis Rotation: ±120° C-Axis Rotation: ±360° continuous Spindle: 9kW High-frequency HSD (18,000 RPM) Tool Changer: 8 position automatic tool changer (ATC) Drive System: Servo motors with helical rack & pinion on X/Y, ball screw on Z Table: Vacuum table with powerful 7.5kW pump, multi-zone clamping Control System: Syntec 610MA-ES industrial CNC controller Max Cutting Speed: Up to 25 m/min Repeat Accuracy: ±0.05 mm Power Supply: 380V / 50Hz 📦 Included with Machine Full extraction-ready setup Includes tooling package Documentation & manuals 🌍 Condition Installed but never used – machine is like new Kedpfx Asxddk Sobvsdn 2025 model – latest generation technology Available immediately – no waiting times 🔑 Summary This is a rare chance to purchase a 2025 BCAMCNC 5 Axis CNC Router in unused condition. With full 5 axis capability, a heavy-duty structure, and precision control, it is the perfect solution for companies requiring high accuracy and productivity in machining complex 3D parts. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Angle adjustment Speed control Central spindle lubrication 5 kW motor Spindle diameter 30 mm Table length 240 cm Table width 35 cm Support extendable up to 80 cm Request more information Kdjdpswtl N Dsfx Abvjn

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Kdjdpfxsw Idhme Abvjn Total number of drilling spindles: 35 Total number of tool changer positions: 14

Condition: excellent (used), functionality: fully functional, Minimax Router 600 Overhead Spindle Moulder Spindle to arm distance: 600 mm Two-speed spindle drive motor: 2.2/1.5 kW Two spindle speeds: 9000/18000 RPM Spindle tilt adjustment: 45-90-45 degrees Vertical spindle stroke: 80 mm Ksdjy Hhv Tjpfx Abvodn Height-adjustable work table Pneumatic spindle control with foot pedal

Condition: good (used), Year of construction: 1997, functionality: fully functional, input current: 50 A, number of axes: 3, number of slots in tool magazine: 12, total length: 5,000 mm, total width: 2,900 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, CNC milling machine with a tool magazine for 12 tools, featuring a vacuum clamping system to secure the workpiece, and includes a vacuum pump. Kodpfx Asza U Nxjbvsdn

Condition: used, machine/vehicle number: 008338, X axis working area: 4500 mm Kdjdpfx Abjx A Tkxsven Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 41 Total number of tool changer positions: 37

Condition: good (used), GF Milling machine with feed cast jaws Suva protection Kjdpfx Abei Hgxxsvsdn

Year of construction: 2019, condition: new, GOMA GS-900 Router Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Cost of delivery Customer cover Startup Type to be agreed Description Comments Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Kdsdpfx Abefbl Epevsn Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers

Condition: good (used), Router, router, hand router -Handover: in current condition as seen -Accessories: collet, but without clamping nut, depth stop -Speed: 12000 rpm -Rated consumption: 800 watts -Connection: 230 volts -Dimensions: 320/320/H320 mm Kodpfsb A N Nmjx Abvodn -Weight: 12kg

Condition: used, Used machine Equipment and technical data: Versatile copy router with extremely short setup times, both when switching from manual operations to automatic work, as well as when changing between various automatic processes. The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces mounted on a template past the milling tool. The automatic copying and pressure rollers can be removed within seconds, allowing the machine to be quickly prepared for custom and one-off manual production. Distance between tool axis and column: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1,510 x 1,170 mm Motor power: 4 kW Motor power for template feed: 0.14 kW Kdedpfjy Scl Hsx Abven Template feed speed: 1.5–12 m/min Number of adjustable turret depth stops: 6 Dimensions (approx.): 1,690 x 1,100 x 1,890 mm Weight: 650 kg Availability: short-term Location: 63934 Röllbach

Condition: used, machine/vehicle number: 008431, X axis working area: 6360 mm Y axis working area: 1905 mm Kdedpfx Aboym Rphsvsn Working Table: Pod and Rail Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 60

Condition: used, Year of construction: 2022, PCB Separator Aurotec AUO 3000C Kdodpfx Asx U R S Tebven Vacuum Cleaner Aurotec YSF-V553

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type Numerical Control Type ?? / Software Biesse Works N. 1 Working table with N. 10 supports ATS (L = mm 1800) Automatic Tools Changing System (Store /14 folds-positions) Kdedpfsy Nk R Eex Abven Useful working area (X - Y - Z) mm 6735 x 1650 x 290 Useful working area (X - Y - Z) in edge banding mm 5780 x 1650 x 60 N. 2 Working areas n. 1 Vacuum pump (capacity m3/h) 250 Front emergency carpets - Motorized carpet to evacuate the wastes from the working process Total power installed KW 31.13 Working group (top): N. 20 Independent vertical boring spindles N. 8 Independent horizontal boring spindles N. 1 Circular Saw N. 1 Vertical electro-spindle HSK F63 (Kw 13,2) Edge Banding group on board, with Glueing Unit (Hot Melt glue) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 4 reels)

Condition: used, machine/vehicle number: 008471, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Kedpfsywaf Ujx Abvedn Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008473, X axis working area: 4900 mm Kdodjywaf Iopfx Abvsn Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Kdsdsy Ih S Rjpfx Abvsn Features and technical data: Versatile copy router with extremely short setup times, both when switching from manual operations to automatic processes and when changing between various automatic machining tasks. The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces mounted on a template past the milling tool. The automatic copying and pressure rollers can be removed within seconds, freeing the machine for custom and special manual jobs. Distance between tool axis and column: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Template feed motor power: 0.14 kW Template feed speed: 1.5–12 m/min Number of adjustable turret depth stops: 6 Dimensions (approx.): 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Features and Technical Data: Kdsdpfx Aey Ih S Dsbvon Versatile copy router with extremely short setup times, both when switching from manual to automatic operations and when changing between various automatic processes. The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the milling tool. The automatic copying and pressure rollers can be removed within seconds. This allows the machine to be available for single and custom manual fabrication. Distance between tool spindle and frame: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Motor power template feed: 0.14 kW Template feed speed: 1.5–12 m/min Number of adjustable revolver depth stops: 6 Dimensions approx.: 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2018, I sell the throughfeed CNC drilling machine MAGGI Boring Evolution 1000 Router, Year 2018. New machine from showroom ! Configuration: Milling head motor 3,3kW / 24.000 rpm 11 + 4 + 2 pcs. drilling units Grooving saw 1 pc. Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Kdjdpfx Aoy U Er Uobvjn Max. Working width 1200mm Max. Element thickness 40mm Total area covered: 2200 x 1400mm / Only 3m2 Total weight: 1350 kg. With full documentation and CE. Tools included and programmed. Very good condition. Available immediately.