Used Sand Blasting Machine for sale (64,240)

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, Dodpfx Ajt Tqy Ejl Uekn quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, We offer a Schlick HB 16/22-5,4-3/7,5 overhead shot blasting machine. Maximum workpiece size – width 1600 mm, height 2200 mm, maximum workpiece weight – 800 kg. Filter – 22 m³/h. 3 x turbines – 15 kW each, turbine diameter – 325 mm Total machine power consumption – 56.74 kW. Dkedjy Abp Sspfx Al Uon The machine can be tested. Complete documentation is available with the machine.

Condition: good (used), Ehemann belt sanding machine FU 3 with 3 sanding units Oscillating. Sanding width 400 mm. Height approx. 150 mm. Sturdy machine with little wear. Djdjtdpa Ujpfx Al Uskn

Condition: like new (used), Year of construction: 2024, Felder Edge Sander FS 700 K Oscillating sanding belt Technical specifications Dimensions [mm]: 1875 x 776 x 1437 Working height [mm]: 895 - 1024 Frequency [Hz]: 50 Weight [kg]: 295 Power [kW]: 3 Dsdpfx Aoy Amv Rjl Ujkn Tilt angle [°]: 0-45 Sanding belt dimensions [mm]: 3000 x 200 Sanding belt speed [m/s]: 19 Voltage [V]: 3 x 400 Year of manufacture: 2024 Condition: very good Price

Condition: good (used), PRIMULTINI - grinding machine for knives - grinding lenth max 800 mm - technical condition good Dodpfjyzy Nbox Al Uokn

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 3000mm Table size: 960mm x 352mm Dksdpsgr Ufhsfx Al Usn Additional table: 330mm x 330mm veneer sanding device: yes Oscillation: yes sanding unit swivels: yes suction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 810mm Weight: 290kg

Condition: as good as new (ex-display), Year of construction: 2022, Strip width: 150mm Belt length: 2170mm Table size: 1440mm x 710mm veneer sanding device: yes oscillation: yes Table tilting: yes, 0°÷ 45° Dksdpfxohpmahs Al Uen Suction connection: 120mm Motor power: 3 kW Machine length: 1440mm Machine width: 800mm Weight: 530kg

Condition: as good as new (ex-display), Year of construction: 2022, Strip width: 150mm Belt length: 2400mm veneer sanding device: no Dkedpfx Aljhpmade Ujn oscillation: yes roller diameter: mm grinding unit swiveling: yes / 90° - 0° Work table: 730 x 300 mm additional table: 420 x 400 mm Belt speed : 14 m/sec. m/sec. Suction connection : 120mm Motor power : 1,8 kW / 400V Machine length: 1480 mm Machine width: 680 mm Weight: 160 kg

Condition: new, Year of construction: 2022, Strip width: 150mm Belt length: 2740mm veneer sanding device: no oscillation: yes Dkjdpfjhq A H Dex Al Usn roller diameter: 115 mm Grinding unit swivels: yes / 90° - 0° worktable: 900 x 305 mm additional table: 290 x 260 mm Belt speed : 16 m/sec. m/sec. Suction connection : 100mm Motor power : 3 kW / 400V Machine length: 1540 mm Machine width: 750 mm Weight: 220 kg

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 3000mm Table size: 960mm x 352mm Additional table: 330mm x 330mm grinding roll diameter: 60mm / 100mm / 120mm Dkodpjgtdpusfx Al Uon veneer sanding device: yes Oscillation: yes sanding unit swivels: yes suction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 900mm Weight: 310kg

Year of construction: 2022, condition: used, Number of sanding units 6 st. Sanding height max. 120 mm output 12 kw Djdoynnttepfx Al Ujkn

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min Dodpfx Aexrb Rfol Uekn - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer: Fladder - Type. Gyro 300 VAC Ex - Working width 1300 mm - Year of construction 1999 - Number of brush heads 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans- Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection switch cabinet 1, machine 10kW Dsdpjvwa Drofx Al Uokn - Electrical connection switch cabinet 2, vacuum fan, 15kW - Feed infinitely variable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate switch cabinet, Dimensions: W: 800mm, Depth: 400mm, Height: 1700mm - Location, in stock - Volt, HZ 400 / 50

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm Dsdpfxox Ex Tmo Al Uokn - Volumenstrom: 4.830m³/h bei 24m/s - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET double drum sander DDS-237, equipped with a powerful 400V motor with 7.5 HP and a maximum sanding width of 940 mm. This demonstration unit is in excellent condition. Technical Specifications - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min Dkodjycc R Njpfx Al Uen - Maximum sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction port: 2 x diameter 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping via haulage company: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Condition: used, Year of construction: 1991, EDGE SANDING MACHINE LZK 4: Langzauner edge sanding machine LZK Machining and sanding of all types of wood, also in combination with plastics Dedpfx Aew A Aa Ejl Uskn Year of manufacture: 1991 Motor power: 3 kW Belt speed: 22 m/sec Belt dimensions: 3000 x 200 mm Table size: 1250 x 350 mm Height adjustment range: 200 mm Extraction port diameter: 110 mm Minimum air speed: 20 m/sec Extraction capacity: 700 m3/h Total weight: 450 kg Total connected load: 3.2 kW Operating voltage: 3 x 380 V 50Hz Required space: 1900 x 900 mm All technical data and information as per brochure

Condition: excellent (used), functionality: fully functional, Edge sander Minimax Unilev 150 Belt dimensions: 150 x 2170 mm Dkedpfxeyqxutj Al Uen Two belt speeds Table adjustable from 0–30 degrees Adjustable sanding height Belt oscillation Motor power: 3.3/2.6 kW CE mark

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine Tagliabue TA G T12-KS-SIN 1350, year 1997. Configuration: 1pc. rubber cylinder 1pc. electronic segmented pad 1pc. cross band Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 3 motors total power 55kW Condition very good ! Available immediately. Dkedpfx Aleyzrqqo Ujn

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine Tagliabue TA G-13-KS-DX 1350, year 1997. Configuration: 1pc. rubber cylinder 1pc electronic segmented pad Dodpfx Ajyzrpmsl Ujkn Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 2 motors total power 40kW Condition very good ! Available immediately.

Condition: excellent (used), Belt sander Make Karnasch Type ALMI AL 100 with 6 different contact rollers or sanding rollers Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm Dkodpfx Aleuf N Sce Ujn belt width 100 mm length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: excellent (used), total motor power 9 kW two sanding units plus milling unit pneumatic pads brush variable feed regulated by variator mechanical oscillation height adjustment via remote control CE marking year of manufacture 2003 400 V Dkodoylanqepfx Al Ujn

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x760x1160 mm Weight 230 kg Dksdpfx Aevz Hnrel Ujn Total power requirement 3,5 kw

Condition: like new (used), functionality: fully functional, AUTOMATIC EDGE SANDING machine with 3 units , model TONELLI OTB.15 ( made in ITALY ) second hand machine working condition: Excellent, like new CE regulation: YES Dedpfx Aljywzcho Uokn Voltage: 380/50 for sanding panel edges, on raw and painted edges, flat and shaped, solid, veneered, profiles, frames and various technical data: electric working height adjustment minimum working height: mm.3 maximum working height: mm.100 minimum working width: mm.60 track feed speed adjustable from the control panel: from 5 m/min to 30 m/min track feed with rubber pads and adjustable rubber pressure wheels feed track motor power: 2 HP machine composed of 3 independent units: 1° Unit : Tilting oscillating sanding unit - Pneumatic pad - Motor 2 speeds Hp 1,9 / 3,3 - Automatic group entry - Belt cleaning blower 2° Unit : 45° oscillating sanding unit - Pneumatic pad - Motor 2 speeds Hp 0,6 / 1,2 - Automatic group entry - Belt cleaning blower 3° Unit : 45° oscillating sanding unit - Pneumatic pad - Motor 2 speeds Hp 0,6 / 1,2 - Automatic group entry - Belt cleaning blower Removable support for panel support Installed power: 10 kW Overall dimensions: 3600 x 1600 x 1600 mm Weight: 2000 kg

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Dodeyvvr Uepfx Al Uokn Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Djdpsyvvr Ijfx Al Uokn Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee