Used Sand Blasting Machine for sale (64,944)

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Lhjdoxzl Aqopfx Abneh Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding defective veneers and lacquers Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding barrier films with graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibrating roller can be activated via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1100 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blasting: 490 l/min Extraction connection: 180 mm Ljdpfx Aoyulfmsbnohh Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840 x 1670 x 2200 mm Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Features and technical data: - Suitable for craft enterprises, equipped with 1 combi unit for top-side sanding - Working width: 950 mm Lhedpfx Abezf Sdioneh - Sanding belt dimensions: 970 mm wide, 1700 mm long - 1 combined contact roller and sanding shoe unit, drive motor 7.5 kW, with 85 Shore contact roller and sanding shoe with felt pad and sliding coating - DFL veneer sanding device - Workpiece-controlled air cushion sanding shoe - Protected storage for sanding shoe within the machine - Sanding belt drive with automatic star-delta starter and maintenance-free, wear-free electric braking system - Additional storage for a second sanding tongue - Safety shutdown when door is opened - Pneumatic sanding belt tensioning system - Feed belt mechanism driven by a worm gear motor, feed speeds of 4 and 8 m/min, and automatic belt tracking control - LED digital display for workpiece thickness adjustment - Safety shutdown at machine infeed for over-thick workpieces - Indicator lights for operation status - Optimally arranged dust extraction hood with port (D=160 mm) for the sanding belt - Roller table at infeed - Complete pneumatic control system, including automatic pressure monitor, control, and monitoring devices - All main electrical switchgear—main switch, fuses, contactor control with motor protection relay, indicator devices—in VDE-compliant design - Total connected load: approx. 9 kW - Operating voltage: 380 V, 50 Hz - Dimensions: approx. 1500 x 1650 x 2000 mm - Weight: approx. 1200 kg Availability: by arrangement Location: 63934 Röllbach

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Underside sanding - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure beam Lodpfx Abewpm I Tsnshh - Electromotive adjustment of the tool thickness with an easily readable digital display - Push-button control with contactor - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min Lsdpfxsw R Hh Uj Abnehh - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: used, Used machine Condition: consistent with age Table size: 2600 x 900 mm Max. usable grinding length: 2700 mm Belt length: 7800 mm x 150 mm 1100 mm throat on the right Motor: 5.2/7.5 kW with belt air blast nozzle Shipping dimensions: 4300x1650x1800 mm Weight: 1300 kg Availability: short term Location: Röllbach Lhodpexwz N Sefx Abnsh

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Lhsdpfjx Rpghox Abnoh Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2002, Used machine Year of manufacture 2002 Edge sander with electromechanical oscillation with a 15 mm pendulum stroke of the motorized disc Swivel of the sanding unit by 90° using a hand crank (continuous angle adjustment; read off the scale) Additional table with extraction system for using sanding rolls Ledpfx Abew I U Ahsnohh Height-adjustable table for utilizing the sanding belt Motor 2.2 kW Oscillation motor 0.11 kW Table size 880 x 370 mm Belt dimensions 150 x 2580 mm Dimensions 1700 x 1000 x 1150 mm Weight 250 kg Availability: Short-term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Data – AGTOS Abrasive Blast Machine Manufacturer: AGTOS Type: DHT 21-21-3.6-03-11 Year of Manufacture: 2015 Machine Dimensions Length: 10,420 mm Width: 12,750 mm Height: 6,600 mm Door Opening: 2,000 x 2,000 mm Workpiece Data Max. Workpiece Diameter: 2,100 mm Max. Workpiece Height: 2,100 mm Max. Hook Load: 2,000 kg Max. Workpiece Temperature: 80 °C Blasting System 6 High-Performance Turbines, Turbine Type: 3.6 Impeller Diameter: 380 mm Lhodozf Unwepfx Abneh Blade Width: 55 mm 6 Blades per Turbine Drive Power per Turbine: 11 kW Abrasive Flow Rate per Turbine: 242 kg/min Throwing Speed: approx. 75 m/s Filter System Filter Capacity: 15,000 m³/h Residual Dust Content in Exhaust Air: < 1 mg/m³ Electrical Data Supply Voltage: 3~400 V / 50 Hz Control Voltage: 230 V / 50 Hz Installed Total Power: 63 kW Compressed Air Operating Pressure: 4–6 bar Compressed Air Consumption, Blasting Machine: approx. 0.5 m³/h Compressed Air Consumption, Compressed Air Tank: approx. 9.1 m³/h Application Area Desanding and cleaning of castings Surface preparation before painting or coating Steel, cast iron, and forged parts up to 2,000 kg piece weight Special Feature: Modern hook-on blasting machine with 6 turbines, 2-ton load capacity, and a powerful 15,000 m³/h filter system. Ideal for foundries, forging plants, and contract blasting operations.

Condition: excellent (used), CATALOGUE NUMBER 7928 TECHNICAL DATA - Max. workpiece height: 120 mm - Max. workpiece width: 1900 mm - Top unit with 6 brushes - Unit adjustable up/down - Oscillating unit - Rotating star-shaped sanding unit arrangement - Infinitely adjustable brush speed via inverter - Infinitely adjustable feed, rotation, and oscillation speeds - Main motor: 7.5 kW - Vacuum table Lhsdpfx Ajyu Tmljbnsh - Two vacuum pumps: 2×7.5 kW - Pump dimensions: 1100x800x940 mm - Extraction port diameter: 4x150 mm, 4x200 mm - Overall machine dimensions (L/W/H): 2850x2100x2400 mm - Weight approx. 2500 kg ADVANTAGES – Two vacuum pumps – With oscillation – Rotating aggregate – German-made – Unpainted – Original DTR documentation – Used sander, very good condition Net price: 45,900 PLN Net price: 10,900 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 1994, Oscillation ja ja / nein ja ja/nein ja ja/nein Lsdjzfqkzjpfx Abnshh tiltable up to 30 Grad Motor output 2,8 kW Table dimensions 850 x 300 mm sanding width 150 mm Weight 330 kg

Condition: good (used), Year of construction: 1993, Table dimensions 800 x 2790 mm throat 550 x 310 mm motor power 4,0 kw sanding belt measurements 150 x 7800 mm Ljdpfxezfqkhe Abnohh 2600 Working width 850 mm Dust suction hood 180 mm

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Lhedpsy Dd Igefx Abnoh Location: Nattheim

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Lhodpeywlfysfx Abnjh

Condition: used, Year of construction: 1994, Belt height: 150 mm Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Veneer sanding mechanism End-face sanding / radius sanding with a small support table Surface sanding with a tilting table Ljdpjzd Hngsfx Abnohh Belt direction: right/left Location: Nattheim

Condition: used, Year of construction: 1953, grinding wheel dia. x width ca. 200 x 25 mm magnetic clamping plate ca. 450 x 170 mm cross feed of the table 200 mm Lhodpfx Aexu Nw Esbneh revolutions of grinding spindle 3000 U/min grinding wheel hole diameter 51 mm weight ca. 1300 kg 0,001 - 0,013 mm grinding length 600 mm Surface grinding machine Includes extractor 1 additional grinding wheel holder Machine was in occasional use until recently

Year of construction: 2014, condition: not inspected (used), Number of sanding units 6 St. Ljdpfxjx Dng Dj Abnshh sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Year of construction: 2022, condition: not inspected (used), Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer Lhedpfxsxyafko Abnoh ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: excellent (used), functionality: fully functional, Volpato LBO 60 belt grinder Lsdszd Ethepfx Abnshh Table length: 3000 mm. Table width: 1100 mm. Vertical travel: 680 mm. Maximum belt length: 8500 mm. Belt width: 150 mm. Belt feed motor power: 5.5 HP Table lifting motor power: 0.5 HP Dust extraction motor power: 1 HP Belt speed: 18 m/s Overall dimensions: 4500 x 1500 x 1500 mm. Weight: 600 kg.

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Lodpfx Aev Idf Isbnehh Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment Lodjv D Rg Depfx Abnohh bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and Lhedpfxevu Hgbo Abnsh ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission Lhjdet Tqy Ejpfx Abnjh the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! Lodpfjvnv Tqox Abnohh ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm Lhsdpfx Abozbyt Eoneh 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -