Used Sand for sale (2,174)

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Duodpfx Ajyrty Tobhsp Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Dodpfeyrty Hox Abhjup Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side Djdpfx Absw R Hh Ushjup - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Year of construction: 1997, condition: used, Number of sanding units 1 st. sanding width 140 mm Sanding height max. 120 mm LÖWER Molding Intermediate Sanding Machine Model LZ 2 For finishing and intermediate sanding of all types of moldings. Particularly fast processing thanks to simultaneous sanding of Dusdpfx Ajyn R Itjbhop several moldings side by side. Conveyor belt feed with table extension under the sanding roller. 1 roller unit from above, working width 140 mm, table length 1100 mm, Workpiece thickness adjustment 2 - 120 mm with numerical display, Drive motor 2.2 kW at 1,430 rpm, mandrel 32 mm, Three feed speeds: 6, 12, and 16 m/min, Infeed contact, extraction ports 2 x 100 mm, Operating voltage 400 V, 50 Hz, 3 Ph, air connection 6 bar. NOTE VIDEO: Video NOT original. Shows machine type of the same model from our archive. (Technical data according to the manufacturer - without guarantee!)

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Dusdpfxsxyafko Abhsp Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry Duodpfx Aet Tqy Eebhsp - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 3000mm Table size: 960mm x 352mm Additional table: 330mm x 330mm veneer sanding device: yes Oscillation: yes sanding unit swivels: yes suction connection: 120mm Motor power: 3 kW Dedpfsgr Ufhex Abhsup Machine length: 1900mm Machine width: 810mm Weight: 290kg

Condition: as good as new (ex-display), Year of construction: 2022, Strip width: 150mm Belt length: 2170mm Table size: 1440mm x 710mm veneer sanding device: yes oscillation: yes Table tilting: yes, 0°÷ 45° Suction connection: 120mm Motor power: 3 kW Duedpfx Aohpmahebhjp Machine length: 1440mm Machine width: 800mm Weight: 530kg

Condition: as good as new (ex-display), Year of construction: 2022, Strip width: 150mm Dodshpmadepfx Abheup Belt length: 2400mm veneer sanding device: no oscillation: yes roller diameter: mm grinding unit swiveling: yes / 90° - 0° Work table: 730 x 300 mm additional table: 420 x 400 mm Belt speed : 14 m/sec. m/sec. Suction connection : 120mm Motor power : 1,8 kW / 400V Machine length: 1480 mm Machine width: 680 mm Weight: 160 kg

Condition: new, Year of construction: 2022, Strip width: 150mm Belt length: 2740mm veneer sanding device: no oscillation: yes roller diameter: 115 mm Grinding unit swivels: yes / 90° - 0° Dedjhq A H Dspfx Abhjup worktable: 900 x 305 mm additional table: 290 x 260 mm Belt speed : 16 m/sec. m/sec. Suction connection : 100mm Motor power : 3 kW / 400V Machine length: 1540 mm Machine width: 750 mm Weight: 220 kg

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 3000mm Table size: 960mm x 352mm Additional table: 330mm x 330mm grinding roll diameter: 60mm / 100mm / 120mm veneer sanding device: yes Oscillation: yes sanding unit swivels: yes suction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 900mm Weight: 310kg Dsdpfx Aegtdpuobheup

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET double drum sander DDS-237, equipped with a powerful 400V motor with 7.5 HP and a maximum sanding width of 940 mm. This demonstration unit is in excellent condition. Technical Specifications - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min - Maximum sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction port: 2 x diameter 100 mm Dsdpfsycc R Nox Abhsup - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping via haulage company: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Year of construction: 2022, condition: used, Number of sanding units 6 st. Sanding height max. 120 mm output 12 kw Duedpjynnttefx Abhop

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Duedpfxoxzi S Ne Abhjp Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: excellent (used), functionality: fully functional, Edge sander Minimax Unilev 150 Belt dimensions: 150 x 2170 mm Two belt speeds Table adjustable from 0–30 degrees Dujdpfx Asyqxutobhjp Adjustable sanding height Belt oscillation Motor power: 3.3/2.6 kW CE mark

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: used – ready for operation Description Wide belt sanding machine Condition: function-tested – Working width 1300 mm – Cross sanding unit with belt air-jet cleaning device Dujdpfx Ajx N A Aaobhep – Longitudinal sanding unit with steplessly adjustable speed and belt air-jet cleaning device – Calibrating roller, controllable via control panel – Vacuum conveyor belt – feed speed steplessly adjustable – Satin finishing roller – Brush roller – Machine settings and pressure regulation system CNC-controlled - EA dedusting unit, high-pressure air-blast installation with rotating nozzles and ionization for statically charged dust Location: ex customer site - Immediately available - Machine must be dismantled by the customer

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 2600mm Oscillation: yes Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm weight: 180kg Duodpfoiuld Djx Abhsp

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Dujdjvvkipspfx Abhsp

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Lye Coating Machine Drautz RD 100 Compact design One-person operation & easy cleaning Double lye curtain With stripping unit Connection: 400V, 16A CEE plug Used machine With warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Djdpfxsxmrbde Abheup Options: Maintenance contract Service package Salting unit Delivery service Spare parts box for increased safety Training & commissioning Visit our extensive selection!

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm Dsdsfyadbepfx Abhjup - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, The BIESSE SAND REGAL 1350 is an industrial wide belt sander designed for calibration and fine sanding of flat components in the furniture and panel production industries. The REGAL series represents a robust production solution suitable for medium to high production volumes. Dujdpfxsynb Rfj Abhop The machine features a modular design, allowing for a combination of calibration and finishing operations in a single pass, which significantly increases productivity.

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data:- Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm Djdpfx Abeyh Hwuehjup - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ Djdpfjxrb Rfex Abheup - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer: Fladder - Type. Gyro 300 VAC Ex - Working width 1300 mm - Year of construction 1999 - Number of brush heads 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans- Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection switch cabinet 1, machine 10kW - Electrical connection switch cabinet 2, vacuum fan, 15kW - Feed infinitely variable 2 - 8 m/min Duodpfx Ajvwa Drjbhep - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate switch cabinet, Dimensions: W: 800mm, Depth: 400mm, Height: 1700mm - Location, in stock - Volt, HZ 400 / 50

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm Dodsx Ex Tmepfx Abheup - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg