Used Sandblaster for sale (281)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW 2025 MODEL • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm • Fifth-wheel coupling with sliding device and self-lubricating (Type Jost JSK), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all necessary chassis modifications for crane installation, removal and reinstallation of ancillary components, exhaust system, tanks, etc. Adaptation of the vehicle frame • All chassis and bodywork modifications are carried out in strict accordance with the bodybuilder guidelines of the respective chassis manufacturer, ensuring the highest quality • Complete installation of a special auxiliary frame developed in-house and manufactured from fine-grain steel for crane and body, welded and bolted to the chassis frame, ensuring extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the auxiliary frame, finished to the highest quality and painted in frame colour • Mounting/bolting of the crane and main stabilizer support to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front • Flatbed constructed as a removable steel/welded structure • Approx. length: 380 cm, width: approx. 248 cm Kfodpfsxvv Elex Agzea • Flatbed body painted in RAL chassis colour • Removable aluminium sideboards by Suer, 600 mm high, anodized finish with steps, removable "Kinngripp" posts • Standard flatbed floor with welded 4 mm steel checker plate, painted in RAL chassis colour • 6 flush, retractable lashing rings rated at 2500 daN per side, adjustable in slotted profile • 4 chain lashing points rated for 6500 daN (2 front, 2 rear on the body) • Solid front wall consisting of welded frame with 4 mm welded steel plate and 5 accessory hooks, approx. 1300 mm high, painted steel design, with 2 welded folding lashing eyes for load securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted) – please specify RAL colours • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted) – please specify RAL colours, size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, 2 rows (as agreed), spaced approx. 80 cm from the front wall and rear • Holders (for support pads, crane pads) made of galvanized steel • Additional stabilizer fitted under chassis • Installation of underrun protection at the rear and additional stabilizer, with installation of hydraulic and electrical connections • Duomatic and red/yellow couplings at the front for semitrailers and also at the rear for trailers New Crane, Type FASSI F545 RA 2.27, continuous rotation, completely assembled, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment & crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual, and crane inspection log Lighting: • 2 LED-AS integrated into the front wall • 2 revolving beacons on FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, one left and one right, arrangement by agreement • 4 LED-AS, two left and two right

Condition: new, power: 352 kW (478.59 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 4,800 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference for customer inquiries: 3-196 / IMMEDIATELY AVAILABLE ---- MAN TGS 26.480 6x4 three-way tipper with FASSI F255A.2.24 E-DYNAMIC loader crane Loader Crane: * FASSI F255A.2.24 e-dynamic * Hydraulic quadruple extension, 12.7 m reach with 1,415 kg load capacity * e-dynamic hose kit for 2 auxiliary devices * Slewing range: 400° * Double linkage system with PROLINK (over-bending knuckle arm up to 15°) * Electronic overload protection with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Special hydraulic outriggers, 6.64 m extension incl. FSC * Outriggers operable via remote control * FL system (Full Lift) – rapid extension valve for telescopic arms * LED work lights Vehicle: Kfsdpfx Aexnn Suogzea * MAN D2676 LFAI diesel engine, 353 kW (480 hp), 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 OD automatic transmission * MAN TipMatic driving programs: Performance, Efficiency, and Offroad, up to 70,000 kg * 6x4 drive * Leaf/air suspension * Differential locks on driven rear axles * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles * 310 l fuel tank capacity, 60 l AdBlue tank * Full brake assist * High-performance engine brake MAN EVBec, multi-stage * Disc brakes on the front axle, drum brakes on rear axles * RINGFEDER trailer coupling, type 4040/G150A * Cab NN: the practical option (narrow, medium length, standard height) * Mechanical lifting roof * Air-sprung comfort driver's seat with lumbar support, shoulder adjustment, and seat heating * MAN EasyControl panel, 4 functions, operable from outside when door is open * Electrically operated interior sun blind for windscreen * Cool box * MAN SmartSelect infotainment control with touchpad and direct-entry buttons * MAN Media System Navigation Advanced 7 inch * MAN Soundsystem Advanced * Navigation maps for Europe and Russia * Online traffic data for navigation Body: Three-way tipper body with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab (crane with top specification: radio remote control, hydraulic outriggers via remote operation, work lights, etc.) Platform: * Dimensions (LxWxH): 4,800 mm x 2,420 mm x 800 mm * Bulkhead: 1,000 mm high Subframe: Robust steel welded construction with two longitudinal members and cross members to support the 5 mm thick tipper profile and a 5 mm Hardox or Naxtra floor plate. A 1,000 mm high fixed steel bulkhead with 2 round lashing rings inside, positioned externally at half height. Fixed corner posts with lower fasteners. Rear and side walls (one-piece over the full length) made of aluminium hollow profiles; side walls are foldable and swingable with tailgate lifting aid. The tailgate is also foldable and swing-mounted, with centralized locking integrated into the tipper profile. Floor plate made of 4 mm Hardox or Naxtra, precisely welded to the tipper profile and the longitudinal/cross members. Press traverse and tipper arms are recessed into the longitudinal beams and appropriately reinforced. Lashing rings (4 per side) are distributed along the outer edge of the tipper floor. Steel structure made from St 52-3. All steel parts are sandblasted; body components are painted or powder-coated in single-color RAL 9016. Auxiliary frame: Designed to accommodate the front and rear tipper arms, with press traverse and cross members. In crane installation area, constructed as a closed box profile with side ...

Condition: used, Year of construction: 2008, filter area: 72 m², suction capacity: 5,000 m³/h, Dust extraction, smoke extraction, external self-cleaning filter from the renowned brand NEDERMAN. Filtration ventilation suitable for plasma, laser cutting, sandblasting, soda blasting, gypsum, cement, brick, plastics, and various types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Upon customer request, new filter cartridges can be ordered, tailored to the intended application. Model: FilterMax DFIL 40 Fan in a soundproof enclosure, 5.5 kW power. Capacity: 5000 m3/h Filtration area: 72 m2 Stock No.: 1017 Kedpew Dza Tjfx Agzsfa

Condition: new, maximum load weight: 32,340 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire inventory of vehicles, including those available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Chassis: * Welded construction using high-quality steel profiles with punched-through cross-members, designed for high point loads Coupling device: * 2-inch kingpin Landing gear: * 2 x 12 t landing legs with compensating foot and single-side operation on the right front side Axles: * 3 x 9 t air suspension axle units * Disc brakes * SAF brand, with disc brake approx. 430 x 45 mm * ABS * Centrally positioned wheel mounting, 10-hole with ET 120 * Total pneumatic suspension lift approx. 200 mm, of which approx. 140 mm raising and 60 mm lowering, controlled via rotary lever valve with detent Brake system: * Dual-circuit air pressure braking system according to EC standards with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Mistake-proofed coupling heads permanently mounted to the front cross member, with no connecting line to the towing vehicle Tyres: * 6 units, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice Mudguards: * According to EC, PVC mudguards in front of and behind the axle unit Spare wheel holder: * 1 double basket incl. mounting kit for one spare wheel with ET 120 Load securing: * 9 pairs of folding lashing rings, evenly distributed, pulling force approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, pulling force approx. 2.5 t * Outer frame with holes for tension straps approx. every 500 mm Kfsdpowx Db Ajfx Agzsa Front wall: * Reinforced steel construction, fixed * Interior lining approx. 9 mm birch plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed into outer frame Lighting system: * EC compliant, 24 volts with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline lights at rear * Number plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross member Equipment: * ECE 70 warning board * Bracket for rotating beacon (without beacon) Paintwork: * Chassis and front wall sandblasted, primed and painted in single color * Chassis: RAL 3002 (carmine red) * Sideboards: Anodized * Sideboard stanchions: RAL 3002 (carmine red) * SSV: Aluminum anodized * Hubs: KTL coated * Rear underrun guard: white (RAL 9010) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets across the loading deck * 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front wall * Sideboards: 5 x 25er sideboards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion rails for sideboards and stanchions left and right under the chassis * Container locks for 1 x 40' and 2 x 20' containers at rear flush, container locks for 1 x 20' container in center position * Work light on lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible

Condition: new, functionality: fully functional, mileage: 100 km, power: 88.26 kW (120.00 HP), fuel type: diesel, maximum load weight: 450 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 2,750 mm, gearing type: automatic, emission class: euro6, loading space length: 3,200 mm, loading space width: 2,000 mm, Year of construction: 2025, Equipment: air conditioning, central locking, crane, fog lights, NEW – IMMEDIATE DELIVERY Engine: 2,000 cc – 120 HP Automatic transmission Kfjdpfxoxw D Tge Agzoa Air conditioning Safety Pack II PM 2823 crane with 3 extensions Lifting capacity at 2.50 m – 990 kg Lifting capacity at 7.20 m – 315 kg MENTA three-way tipper Dimensions: 3200x2000 mm Aluminium side boards TR4, 400 mm high Rear board upper/lower opening Sandblasting, primer, and powder coating Payload: 450 kg 24 months warranty Leasing or financing available

Condition: used, Year of construction: 2017, operating hours: 4,902 h, functionality: fully functional, machine/vehicle number: 55/17, input voltage: 400 V, compressed air connection: 7 bar, type of input current: three-phase, power: 2 kW (2.72 HP), operating pressure: 4 bar, workpiece weight (max.): 700 kg, air demand: 120 m³/h, Equipment: documentation/manual, Sandblasting machine Bohle SBM 2500P Year of manufacture: 2017 Sandblasting machine for blasting and matting glass panes. Almost all air hoses and belts were replaced this year. An on-site inspection during operation is possible by appointment. Sale as is, without guarantee or warranty. Kodpoxukmbefx Agzofa A large quantity of spare parts is included free of charge. Self-collection only. Compressor can be purchased additionally as an option. We look forward to your inquiry.

Condition: new, mileage: 4 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, - Radio/cassette player - Spare wheel - Sun visor flap - Power take-off (PTO) Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck designed for personnel and cargo transport under challenging conditions. Its powerful 394 hp engine and 6x6 all-wheel drive ensure top performance on rough terrain. The versatile flatbed with bench seating and twistlocks makes it ideal for troop transport and container logistics. This vehicle delivers reliability for demanding off-road missions and operations. Technical data Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for maximum traction off-road. - Gross Vehicle Weight (GVW): 27 tons, suitable for heavy-duty transport. - Axle configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential locks. - Suspension: Reinforced 3-leaf parabolic spring on front axle (8.0 t) and rear axles (2 x 13.0 t). - Wheelbase: 5100 mm for stability and maneuverability. - Engine: 12.8-liter inline 6-cylinder OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and transfer case VG 3000-3W. - Tyres: 365/85 R 20, optimized for off-road use. Flatbed body features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Slip-resistant checker plate steel floor (3/5 mm, S235JR) with 10 lashing points. - Sidewalls: Folding, removable side panels and tailgate, optionally usable as flatrack. - Twistlocks: 4 units for ISO 20-foot containers. - Benches: Folding benches for 30 persons, 415 mm per seat. - Roof and tarpaulin: Steel hoops with waterproof PVC tarp (630 g/m², UV-resistant), color RAL white. - Extras: Folding steps, rubber buffers, splash guard with stone chip protection. Kfjdpfx Aextm Daegzoa Included accessories: - Lockable toolbox on chassis. - Brackets for water and fuel canisters. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasting (SA 2½), wax coating, RAL color tone white. Outstanding performance: - Versatility: Flexible for personnel, freight, or container transport. - Durability: Solid steel construction for off-road applications. - Efficiency: Quick adjustment of the flatbed without tools. - Reliability: Reinforced suspension and powerful engine. Fields of application: - Military: Troop and equipment logistics. - Logistics: Transport in remote areas. - Container logistics: Handling of ISO 20-foot containers. Additional options: - Lockable fuel caps, under-tank protection. - LED lighting, first aid kit, warning triangle, 6-kg fire extinguisher. Powerful under the toughest conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in tough terrain and demanding logistic operations—the ideal solution for heavy-duty transport tasks. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or General information Year of manufacture: 2025 Technical information Number of cylinders: 6 Engine displacement: 12,800 cc Gross vehicle weight: 27,000 kg Drivetrain Fuel tank: 390 liters Transmission...

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal customer enquiry number: 5-052 / Available immediately!!! MAN TGS 26.440 6x2H-4 BL 3-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: * FASSI F195A.2.24 e-dynamic * Lifting moment: 162 kNm (16.51 tm) * Hydraulic four-fold extension: 12.7 m * e-dynamic hose routing for 2 additional attachments * Slewing range: 400° * Double knuckle boom system with PROLINK (over-bending knuckle arm up to 15°) * Electronic overload shut-off device with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) Kfedpfjxnnwkjx Agzsa * Special outriggers, hydraulic outreach of 6.64 m incl. FSC * Outriggers operable via radio remote control * FL-System (Full Lift) engageable rapid feed valve for extensions * LED work lights Vehicle: * MAN D2676 LFAJ diesel engine, 324 kW (440 hp), 2,200 Nm torque, Euro 6e * MAN TipMatic 12.24 OD automatic transmission * 6x2H-4 MAN HydroDrive, hydrostatic driven front axle * Wheelbase: 3,600 + 1,350 mm * Leaf/air suspension * RINGFEDER 40mm trailer coupling, type 4040/G150A (alternatively with surcharge, 50mm diameter) * 2-line trailer brake couplings, DuoMatic coupling * Fuel tank capacity: 390 l, AdBlue tank capacity: 60 l * High-performance engine brake MAN Turbo EVBec, multi-stage * Differential lock on driven rear axle * Trailing axle, 9,000 kg, non-driven, straight, steered, liftable * Prepared for 2 cameras, one camera coupled to reverse gear * NN cab: the practical cab (narrow, medium-length, standard height) * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * Electric sun roller blind for windscreen, interior * Coolbox * MAN EasyControl operating panel, 4 functions, can be operated from outside when the door is open * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system Superstructure: 3-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane mounted directly behind the cab (crane with top features: radio remote control, hydraulic outriggers with wireless operation, work lights, etc.) Flatbed: * Dimensions (LxWxH): 4,800 mm x 2,420 mm x 800 mm * (Alternative also available: loading length 5,200 mm x 2,420 mm x 800 mm) * Headboard height: 1,000 mm Subframe: Robust steel welded construction with two longitudinal members and cross members to support the 5 mm tipper profile and the 4 mm floor plate made of Hardox or Naxtra. Fixed 1,000 mm high steel front wall. Fixed corner stanchions with lower-mounted locks. Rear and side walls (single piece along full length) made of aluminium hollow profiles, side walls foldable and swinging with drop-side lifting assistance. Tailgate also foldable and swinging, with central locking integrated in the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, cleanly welded to the tipper profile and longitudinal/cross members. Press traverse and tipping arms are recessed and correspondingly reinforced in the longitudinal members. Lashing eyes (4 per side), positioned externally along the length of the tipper floor. Steel structure made of St 52-3. All steel components are sandblasted, superstructure parts painted or powder coated in RAL 9016 (pure white). Subframe: Subframe for mounting the front and rear tipping arms, with press traverse and cross members. In the crane mounting area, designed as a closed box profile with side-mounted crane mounting plates. Plastic mudguards.

Condition: used, filter area: 126 m², suction capacity: 4,000 m³/h, negative pressure: 3,100 Pa, Dust extractor, welding fume extraction, self-cleaning cartridge filter for plasma, laser, sandblasting, and shot blasting applications. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, which minimizes the risk of explosion. Brand: Lincoln/SULT Model: FLC 3-6 Motor power: 5.5 kW Capacity: 4000 m3/h Vacuum: 3100 Pa Kfsdpfx Ajw Aw Azjgzsa Cartridge filter elements: 6 pcs Filtration area: 126 m2 Inlet diameter: 320 mm total height: 3.20 m width: 1.25 m depth: 1.15 m stock number: 0637

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Kfedjwx Dbiepfx Agzea Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: excellent (used), Year of construction: 2012, Sandblasting cell with Staubli TX60L robot Country of origin: France Year of manufacture: 2012 Control system: CS8C-TX60 Number of axes: 6 Maximum load capacity: 5 kg Kfjdpfsqgch Eex Agzja Nominal load: 2 kg Reach: 920 mm Repeat accuracy: 0.03 mm Cell: ALPROBOTIC MB100

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. Kfjdpfelccvmex Agzja 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 56,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 4,800 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH540 Chassis with Wiese Platform Body and Fassi Loader Crane Volvo FH540 10x4 Removable Flatbed with F1150RA.2.28 & Fly Jib, plus Winch and Work Basket ----Application · For good roads, standard operating conditions · Long-distance transport · Predominantly flat topography · Ambient temperature up to +40°C, if above +40°C max. 25 hours/year · Ambient temperature down to -25°C, if below -25°C max. 25 hours/year · Center of gravity (structure and load) approx. 0.5 - 1 m above top edge of frame · Clean roads, max. 10% dirty · Flatbed chassis without pre-installation · Gross combination weight, technical: 80 t (Observe the towing capacity of the trailer hitch!) · Special vehicles · Vehicle for crane behind the cab · Mirrors for body width of 2600 mm · New model · Chassis height: MED (medium), please refer to VBI/WIS for exact height measurements · Electorhydraulically steered trailing axle, single tires · Rear air suspension, tridem, 2 driven axles · Globetrotter safety cab FH · Wheelbase 4,300 mm · Emissions per Euro 6 Stage E, with SCR, particulate filter and EGR · Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm Kodpfew D U Iksx Agzofa · Volvo Engine Brake+ (VEB+). Braking performance: 340 kW/462 HP (D13S) · Complies with ADR braking regulations · I-Shift AT2612, automated 12-speed transmission (direct-drive), max. input torque: 2,652 Nm · Liftable axle · Drive axle RTH2610B. Tandem axles with hub reduction. 4 planet gears · Longitudinal and transverse differential locks · AA tires 315/80R22.5 · Drive axle ratio 3.33 : 1 · Fuel type: Diesel ---- Scope of Delivery Includes: Base unit: F1150RA.2 xhe-dynamic Wiese platform body with drop sides * Execution of all necessary chassis modifications for crane installation, disassembly and assembly of mounted parts, exhaust system, tanks etc., adjustment of the vehicle frame. All chassis and bodywork modifications are performed in compliance with the respective chassis manufacturer’s mounting guidelines and carried out to the highest quality standards. Complete assembly of a custom-designed and manufactured auxiliary subframe made of fine-grain steel, for crane and body. The welded and bolted subframe to the chassis guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique design of the subframe is a distinctive feature. Designs are executed to the highest standards and painted in the chassis RAL color. * Mounting/bolting of the crane and main stabilizer beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front * Flatbed design as a steel/welded construction, REMOVABLE FLATBED, length approx. 4800 mm x width 2480 mm with hydraulic extension to 1400 mm, radio remote controlled. Flatbed structure in steel / sandblasted / painted in chassis RAL color. Removable aluminum drop sides, Suer brand, 600 mm high, anodized finish. Standard bed floor with welded 4 mm steel chequer plate, painted. 2 rows of MultiSave locking system flush-mounted and welded into the floor. 6 x Thiele lashing rings 5000 daN recessed into base frame. 8 x retractable lashing rings per side 2000 daN, flexible profile/arrangement. Stable front wall consisting of welded frame, welded-on 4 mm steel plate and 5 accessory hooks, front wall height 1300 mm, made of steel / painted in the chassis RAL color. Trimming panels, mudguards in stainless steel (WIESE design). 4x 20' container locks on the front wall (2x) in the extensio...

Condition: good (used), Year of construction: 2005, This is a programmable sandblasting machine with a working area of 100x100mm. Includes documentation and instructions. Kfedpfx Agjv Rcycozsa The machine dimensions are: WxDxH - 1300x700x1750

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Device in very good condition. Warehouse No.: 1051 Kedpfxexn Rgus Agzofa

Condition: refurbished (used), Year of construction: 2019, operating hours: 1,425 h, functionality: fully functional, machine/vehicle number: 717520914323, area performance: 3,500 m²/h, The Hako Scrubmaster B75 R is from 2019 and has only clocked up 1425 operating hours. It was completely dismantled and cleaned by us and every component was checked for proper function. Four new maintenance-free gel batteries are included. The squeegee and brush deck were sandblasted and powder-coated in our workshop. New rubber lips and new brushes have been fitted. Kjdpfxsu Ezmne Agzsfa The Hako Scrubmaster B75 R is a very compact cleaning machine and very suitable for small to medium-sized areas such as workshops, halls or stores. Technical data: Working width scrubbing cm 65 Area performance theoreticalm²/h 3.500 Working speedkm/h 5.5 Fresh water tank capacityl 75 Dirty water tank capacityl 75 Length with squeegeecm 147 Width without/with squeegee cm 76/86

Condition: used, mileage: 7,866 km, power: 270 kW (367.10 HP), first registration: 05/2025, axle configuration: 2 axles, next inspection (TÜV): 05/2026, gearing type: automatic, Year of construction: 2022, Equipment: air conditioning, electronic stability program (ESP), FA XD 370 ZIKUN Swing-Board Body CRYSTAL WHITE Mechanical cab suspension Day Cab DAF Corner View Handles and trim: Black, side panels: cab color LED daytime running lights Chassis configuration front: floor plate Aero Central locking Windshield with sun protection film Beacon preparation on front of cab LED headlights, cornering and fog lights Adjustable roof spoiler for Day Cab Passenger seat: cinema-type with fabric upholstery Cab interior trim: Hexagon Cab wall trim: fabric Dashboard version: Vision Driver's seat, fixed base Interior trim color scheme: Luxury Passenger seat, fixed base Central storage compartment Steering wheel with silver accents Roof hatch with electric operation Driver's seat: Luxury Air Door panel: loosely woven fabric Automatic climate control for cab Coolbox or refrigerator Driver's seat armrest Dashboard table ECAS remote control with extended functions Auxiliary heater with waste heat pump and timer Adaptive cruise control with FCW and AEBS-3 DAF Connect FMS interface prepared Antennas: DAB-ready radio, 2x mobile, GNSS Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, Version G2V2 DAF Infotainment Luxury Plus, luxury speakers Electronic stability control (VSC) Lane departure warning system Reverse warning system Stabilink rear axle suspension Rear: Air suspension SR1344 Front axle 1: 6,300 kg, load index 148 Rear axle 1: 11,600 kg, load index 145 Rear axle capacity 13.00 t One ride height position, standard height Front air suspension: medium Front: 8.00 t, air suspension, 161 N Silver grey wheel trims Front axle(s): 315/70 R22.5 Driven rear axle(s): 315/70 R22.5 Steel disc wheels, silver gray Standard transport, full version Manoeuvring mode Idle cut-off automatic, 5 minutes Automated gearbox, TraXon, 12 gears Automated transmission with manual mode – full version Traction control (ASR) Emission standard Euro 6 Rear axle ratio 2.47 Mechanical differential lock 12-speed TraXon transmission 12TX2010 DD, 16.69-1.00 MX-11 engine, 270 kW/367 hp, cab emblem: 370 Compressor 2 cylinder without clutch Drive rear axle with disc brakes Pneumatic control for parking brake Parking brake assistant MX engine brake Front underrun protection Exhaust pipe horizontal, low EAS unit right, horizontal with 45-l AdBlue tank left 340l fuel tank Splash guard Steel air tanks Wheelbase 5.10 m / rear overhang 2.75 m Side members 260/7.0 mm, continuous inner reinforcement Prepared for drawbar use, type plate, max. GCW Pneumatic connection for trailer, turntable coupling Cross member D137 + Rockinger coupling D130 Electrical connection for trailer, 24 V/15-pin Side marker lights Tail lift application Generator 110 A, batteries 2 x 175 Ah Front air intake ZIKUN Swing-Board I-Body Technical data: Kedpfx Agjxtr N Iezsfa Through-loading length: 6,650 mm Cargo length: 6,800 mm Loading width at rear portal: 2,480 mm Internal loading width: 2,480 mm External width: 2,550 mm Internal through-loading height: 2,100 mm Approx. loading height: 1,177 mm Approx. overall height unladen: 3,479 mm Floor: Made of 24 mm thick vehicle construction panels UN folding swing mechanism. Upper folding side panels made of 25 mm aluminium composite panels with center locking Roof: Fixed roof Powder-coated in RAL 9010 pure white Bumper protection: Welded steel bumper strips on both sides as impact protection. Painting: The entire body sandblasted, primed, and painted in a single color or powder

Year of construction: 2015, operating hours: 37,500 h, condition: like new (used), functionality: limited functionality, GAS FIRED WET ENAMELING AND DRYING FACILITY Fully operational Gas-fired wet enameling and drying facility, ready for immediate start-up, featuring a natural gas-powered line designed to produce high-quality products for the world's largest manufacturers, especially in the cast iron pots, pans, Kfodpfsxx Skpex Agzja and boilers sector. This proven system ensures consistent, high-volume output to meet global industry demands. Filters,enamel mills,cast iron pots&pans moulds,sandblasting machine, vibratory surface finishing machine, lunge grill,Grinding machines .

Condition: excellent (used), Sandblasting machine De Laurentiis model 100 TS year 2002 Kfodpfjrxr Rgjx Agzoa

Condition: excellent (used), functionality: fully functional, Manufacturer: Langguth. Good condition. The machine is suitable for label or wrap-around labeling. Ready for operation, but upon request, the system can be fully refurbished. All wear parts and the electrical components will be replaced. There is the option to replace almost all sheet metal parts with stainless steel. Alternatively, all parts can be sandblasted and painted in silver (other colors available upon request). Of course, we are also happy to supply the conveyor technology before and after the machine. Do not hesitate to contact us. We have many more machines in stock that are not listed online. We can provide support from empty bottle or can handling up to the finished pallet. I look forward to your inquiry. Gregor Guminski Kodpoxufd Ujfx Agzsfa

Condition: used, Year of construction: 2009, type of input current: three-phase, overall weight: 200 kg, suction capacity: 2,000 m³/h, filter area: 10 m², negative pressure: 2,300 Pa, Equipment: documentation/manual, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for sandblasting, soda blasting, shot blasting and for all types of dry dust. Brand: Pionier Model: Entstauber PF-2B The filter is cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan located on the clean side, minimizing explosion risk. Specifications: Capacity: 2000 m3/h Vacuum: 2300 Pa Filter surface area: 10 m2 Cartridge filter element. Motor power: 1.5 kW Inlet diameter: 180 mm HEPA filter, filtration class H13 Kfjdpfoxnmw Nsx Agzoa Year of manufacture: 2009 Stock number: 1057

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. Kfsdpjwtb Rqsfx Agzja • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, functionality: fully functional, Year of construction: 2025, The dust collector for cabin sandblasters is a complete unit equipped with an engine and a filter. Ensures effective removal of dust and dust from the sandblaster, improving visibility and eliminating escaping dust. Perfect for cabins with a large usable area, it ensures hygienic and safe working conditions. Device description The dust absorber intended for cabin sandblasters is a complete solution equipped with an engine and a filter, ensuring effective dust removal. It is ideal for use in various types of large-area booths where sandblasting is carried out. Thanks to its advanced design, the absorber effectively removes dust from the sandblaster, which improves visibility during operation. Dust that previously escaped from the device is now effectively removed, ensuring more hygienic and safe working conditions. The engine integrated with the absorber ensures high dust extraction efficiency. Thanks to this, users can enjoy the effective operation of the absorber, and sand and dust from the sandblaster are effectively collected and retained in the filter. The filter is a key element of the absorber that is responsible for retaining dust. Effectively retains dust particles and prevents them from returning to the cabin air. Thanks to this, employees are protected against inhaling harmful substances and have better air quality around them. The dust absorber intended for cabin sandblasters is not only an effective tool for maintaining cleanliness, but also ensures safe working conditions and improves the efficiency and precision of sandblasting. Technical data Extraction power 1100W Performance 3m³/min Power 230V/50Hz Noise level 85dB Inlet diameter 52 mm Handle length 280 mm Guard dimensions (height x diameter) 730 x 260 mm Filter dimensions (height x diameter) 310 x 170 mm Weight 9.5 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Kfjdjrh E Azspfx Agzoa

Condition: used, machine/vehicle number: ad30b7932fc8c63648546fc1b, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 2 axles, tire size: 265/70 r19,5, Further information Former exhibition vehicle from 2006 - was used internally and therefore shows signs of use! Side collision protection: Aluminum, from kingpin to start of side collision protection 2 600 mm Underride guard: Frame color and flush with end of chassis as far inwards as possible Wheel chocks: 2 pieces with bracket Bumpers: 2 steel bumpers Paint: Sandblasted substrate, 2-component acrylic paint Wheel rims: Factory silver Approval: with Dekra approval Kfsdei Ri Hyjpfx Agzoa

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 56,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 4,800 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH540 chassis with Wiese body and Fassi loading crane Volvo FH540 10x4 with detachable flatbed equipped with F1150RA.2.28 & fly jib, winch, and work basket ----Application · Suitable for good-quality roads, standard operating conditions · Long-haul transport · Predominantly flat terrain · Ambient temperature up to +40°C, if over +40°C max. 25 h/year · Ambient temperature down to -25°C, if under -25°C max. 25 h/year · Center of gravity height (superstructure and load) approx. 0.5-1 m above top of chassis · Clean roads, max. 10% dirty · Flatbed chassis without preparation · Gross train weight, technical: 80 t (observe towing capacity of trailer hitch!) · Special vehicles · Vehicle designed for crane installation behind cab · Rearview mirrors for superstructure width of 2600 mm · New model · Chassis height: MED (medium); exact height details according to VBI/WIS · Electrohydraulically steered trailing axle, single wheels · Rear air suspension, tridem, 2 driven axles · Globetrotter safety cab FH · Wheelbase 4,300 mm · Emissions according to Euro 6 Step E, with SCR, particulate filter, and EGR · Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm · Volvo Engine Brake+ (VEB+); braking power: 340 kW/462 hp (D13S) · Complies with ADR braking regulations · I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm · Lift axle Kedpjwzwtqsfx Agzefa · Drive axle RTH2610B. Twin axle with hub reduction. 4 planetary gears · Longitudinal and transverse differential locks · AA tires 315/80R22.5 · Final drive ratio 3.33:1 · Fuel: Diesel ---- Scope of delivery includes: Base unit: F1150RA.2 xhe-dynamic Wiese platform body with drop sides * Execution of all chassis works required for crane installation, removal and installation of add-on parts, exhaust system, tanks, etc. Adaptation of the vehicle frame. All chassis and superstructure works are carried out in strict compliance with the body manufacturer’s guidelines, ensuring the best possible quality. Complete assembly of a specially designed and manufactured auxiliary subframe made from high-strength fine-grain steel for crane and superstructure. The welded and bolted subframe guarantees exceptional torsional rigidity and perfect crane vehicle stability. Unique feature: the design of the subframe. Highest quality execution, paint finish in RAL chassis color. Mounting/bolting of crane and main outrigger beam to the subframe. Installation of all hydraulic and electrical connections. Mounting position: front * Flatbed design as steel/welded structure, DETACHABLE PLATFORM, length approx. 4800 mm x width 2480 mm with hydraulic extension to 1400 mm, radio remote controlled. Platform structure steel / sandblasted / painted in RAL chassis color. Removable aluminum drop sides by Suer brand, 600 mm high, anodized finish. Standard platform floor with welded steel checker plate, 4 mm painted. 2 rows of MultiSave locking system recessed and welded into the floor. 6 Thiele lashing rings (5,000 daN) embedded in the floor frame profile. 8 retractable lashing eyes per side (2,000 daN), flexible profile/arrangement. Stable front wall made of a welded frame with 4 mm steel sheet and 5 accessory hooks, front wall height 1300 mm, steel execution / painted in RAL chassis color. Cladding panels, bumpers, version VA-steel (WIESE design). 4x 20’ container locks on the front wall (2x) continuing on the extension...