Used Scan Max for sale (25,788)

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Codpey Iyw Ssfx Acpjrh

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Csdpfx Ajy D I I Rocpsrh Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: excellent (used), Year of construction: 2014, We are offering a high-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Completely ready for connection, including all cables Note: The PC is password-protected, but the software is included on CD Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x... Crsdpfx Acozpwg Rjpsh Set 1000x800 Complete GOM PC system in an aluminum case (running Linux), fully configured for the GOM ATOS IIe Software on CD; steel scale bars with ATOS evaluation dongle Replacement lamp Calibration panel (aluminum) CP20/MV 350x280 mm² Please feel free to contact us if you have any questions!

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Crodow E I Itjpfx Acpsh Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Year of construction: 2010, condition: ready for operation (used), This 3-axis TESA Scan 52 was manufactured in 2010. It features a diameter measuring range of 0.5 - 52 mm and a maximum workpiece length of approximately 300 mm. The machine is equipped for dynamic display of measurement results and non-contact optical measurement, making it suitable for both static and dynamic measurements. If you are looking to get high-quality optical measurement capabilities, consider the TESA Scan 52 optical measurement machine we have for sale. Contact us for further details. Cjdpfx Ajz E H Dzecpjrh - Diameter Measuring Range: 0.5 - 52 mm- Max. Workpiece Length: approx. 300 mm- Max. Part Weight: 4 kg- Voltage / Electrical Data: 24 VDC / 5 A- Special Features: Dynamic display of measurement results, non-contact optical measurement, fast measurement without complex programming, suitable for static and dynamic measurements, Reflex Click- Evaluation Capabilities: Diameter, length, angle, form and position tolerances, simple thread measurement, testing of steps, shoulders, and contours- Scope of Delivery / Included Items: TESA Scan 52, centering points, ER32 collet set, monitor, computer/keyboard and mouse, operating/programming manual- Maintenance & Calibration: Last successfully calibrated on 15.02.2023

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,200 h, functionality: fully functional, machine/vehicle number: 09-0302, For Sale: Massey Ferguson 7726 S + MUS-MAX WT9XLZ Wood Chipper Package price: EUR 115,000 (excl. VAT) 🚜 Massey Ferguson 7726 • Year of manufacture: 2018 • Engine hours: 9170 (A complete engine overhaul was carried out approximately 3,000 operating hours ago.) • Price: EUR 70,000 (excl. VAT) • Power: 255 hp nominal / 280 hp max • Front linkage • Front axle suspension • Pneumatic suspension operator seat (360°) • Regular maintenance • Engine oil changed every 250 hours • Transmission: Dyna-6, 50 km/h • LS pump capacity: 200 l/min • 4 double-acting hydraulic outlets with mechanical control • Rear fender lift controls • Electronic linkage control (ELC) with 9,950 kg lifting capacity • PTO: 540 / 1000 rpm • Air brake system for trailer • MF tires: 55% tread remaining. MUS-MAX WT9XLZ • Year of manufacture: 2009 • Worn parts replaced regularly • New tires • Tower-mounted camera • Additional LED lighting • MUS-MAX tires: 95% tread remaining. • Fully operational – still in active use Crsdpfsy Sgmbex Acpoh

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Line for packaging multiple denominations in one bag (up to 8 different ones). It consists of 8 stations. Each station has a container for denominations that are brought to the counters by conveyors. At each station, the counter counts the set amount of denominations and prepares them in a tube. At regular intervals, the tubes are opened and the denominations are moved into the bag. The bag is then closed by thermal heating of the edge. The line is also equipped with a printer that allows printing on the bags as desired. Please contact us for more technical details. Csdpfx Acevt Sp Seporh L x W x H - 5000 x 5000 x 2700 mm

Condition: like new (used), spindle diameter 35 mm Crsdpezx U Nujfx Acpoh 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 3164, TESA Scan 50 plus – Optical/Tactile Shaft Measuring Machine Year of manufacture: 2005 · Diameter range: 0.5 – 50 mm · Measuring length up to 500 mm · Resolution: 0.1 µm · Complete with Dell PC, monitor, keyboard, and mouse TECHNICAL DATA • Manufacturer: TESA (now part of Hexagon Metrology) • Model: Scan 50 plus • Year: 2005 • Measuring principle: Combined optical + tactile (contactless and tactile measurement) • Diameter measuring range: 0.5 – 50 mm • Length measuring range: 500 mm • Diameter resolution: 0.1 µm • Length resolution: 0.5 µm • Diameter error limit (20 °C ± 1 °C): 1 + D[mm] / 100 µm • Length error limit (20 °C ± 1 °C): 4 + L[mm] / 100 µm • Diameter repeatability: 0.5 µm • Length repeatability: 2 µm • Max. workpiece (D × L × m): 100 mm × 515 mm × 6 kg • Space requirement: approx. 1.3 × 0.8 × 1.2 m • Device weight: approx. 180 kg • Item no.: 3164 SOFTWARE • Pro-Measure (licensed) • Pro-Composer (licensed) SCOPE OF DELIVERY • TESA Scan 50 plus measuring device • Dell control PC • Monitor • Keyboard • Mouse CONDITION & HIGHLIGHTS Pre-owned device, fully functional • Precision measuring device from ongoing production • Software Pro-Measure / Pro-Composer included (licensed) • Ideal for turned parts, shafts, precision journals, and rotationally symmetric test parts • Supplied complete with Dell PC, monitor, and input devices – ready for immediate use MARKET COMPARISON Csdpjy Eqlxefx Acpjrh Original purchase price approx. €40,000. ABOUT THE DEVICE The TESA Scan 50 plus is a high-precision optical-tactile shaft measuring machine for measuring rotationally symmetric workpieces such as shafts, turned parts, precision journals, pins, and similar test pieces. The device combines non-contact optical measurement with tactile probes, achieving a resolution of 0.1 µm for diameters and 0.5 µm for lengths. TESA (Switzerland) is now part of the Hexagon Metrology Group – a world-leading supplier of industrial metrology solutions. The Scan 50 plus is typically used in quality control labs, metrology departments in fine and small batch production, as well as in research and development. LOCATION & TRANSPORT Location: Central warehouse at Auktionshaus Köck, 6178 Unterperfuss, Austria. Self-collection or shipping by freight forwarder by arrangement. Transport costs on request. All information is provided without guarantee. Used device – sale is made to the exclusion of any warranty. Errors and misprints excepted.

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Crsdpozi Eimjfx Acpeh

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,500 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, first registration: 07/2022, total length: 13,800 mm, total width: 2,540 mm, total height: 3,400 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 6,740 mm, color: yellow, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Air suspension - Disc brakes - Toolbox = Notes = MAX Trailer F-S43-1AAF Hydraulic loading platform Adjustable hydraulic ramps Remote control 2022 BPW axles (3) Steering axle Cable winch Width markings TÜV/MOT/APK valid until 01-2027 French semi-trailer Chassis number: YAMT13XXXM01067 EXPORT SERVICES ————— • NL transit registration/license plates with insurance for 14 days • Austrian transit approval/license plates with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with semi-trailer The prices for export services are exclusive of the quoted price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. Cedpfxsz Icaqj Acporh GEERTS Trucks & Trailers / GEERTS Nederland B.V. Spoorlaan Noord 17 5121 WV Rijen The Netherlands

Condition: used, Year of construction: 2007, functionality: fully functional, Machine available with or without camera system. New spindle integrated. Csdpfjx Hyd Nox Acpsrh

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 230 V, bolt circle diameter: 1,000 mm, arm reach: 2,000 mm, Equipment: documentation/manual, A FARO measuring arm is used for precise, portable 3D measurements and quality control across various industries as it enhances the accuracy of traditional measuring methods, reduces errors, provides reliable data for decision-making, and increases efficiency through direct integration with computer-driven processes and software. Why use a FARO measuring arm? Accuracy and Precision: A FARO measuring arm delivers highly accurate 3D measurements, resulting in more consistent and reliable outcomes compared to manual methods. Portability: The arm is portable and can be easily transported and set up at different locations, allowing for flexibility within the measurement process. Quality Control: Codow U Atbjpfx Acperh Manufacturers use the measuring arm for 3D inspections, CAD comparisons, and dimensional analyses to verify and ensure product quality. Efficiency: By providing immediate, precise data, the measuring arm helps prevent errors, reduces rework, and streamlines production processes, leading to faster product delivery and higher customer satisfaction. Data for Decision-Making: The collected measurements provide dependable information that can be used for trend analysis and smarter decision-making by the team. Versatility: The measuring arm can be employed for diverse applications such as reverse engineering, tool certification, and inspection of complex geometries, making it a valuable tool in different production sectors.

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Year of construction: 2019, Equipment: ABS, 1 x lift axle 3 x steering axle Radio-remote steering Hydraulic ramp Camera = Further information = Axle configuration Tire size: 245/70R17.5 Cedezcuxrepfx Acporh Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 3: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 4: Dual tires; Steered; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Weights Unladen weight: 11,344 kg Payload: 54,656 kg GVWR: 66,000 kg Maintenance APK (Technical Main Inspection): valid until 02/2027 Financial information Price: On request Identification Model number: N/A F-S44 / STEERING AXLE - LIFT = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Cut Max Guillotine Crsdpfx Acey Ega Ujpjh Type: GM-1 Efficiency: 1500 kg/h Operating temperature: up to -20°C Machine dimensions: 2100 x 900 x 1850 mm Made of stainless steel Power supply: 3x400V 50 Hz Weight: 550 kg Condition: used/overhauled/ready to work

Condition: good (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 1,600 bar, total length: 4,000 mm, total width: 1,300 mm, total height: 1,900 mm, overall weight: 4,400 kg, warehouse no.: 503730 manufacturer: ENGEL type: e-max 310-100 controller: LC 200 A01 year of construction: 2011 clamping force: 1000 kN distance between tie-bars h x v: 460 x 410 mm size of mould plates h x v: 650 x 600 mm min. mould height: 150 mm max. mould height: 450 mm max. open daylight: 800 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 135 ccm injection pressure: 1600 bar equipment included incl. Spruepicker screen text german core pulling hydraulically 1x Anti vibration mounts mould heating 8x Crjdpfxjz Eabts Acpsh handling type: Angussentnahmegerät manufacture: ENGEL controller: ER-USP 5 year of construction: 2011 measures of machine l x w x h: 4m x 1.3m x 1.9m total weight: 4400KG

Condition: used, CNT-Scan MiniModule: CNTMM 4 Aut CXS, LOB 6p, LOB 5p, CAN ART0200990 Crjdjwm Iwqspfx Acpeh Power supply 5-60V DC / 1.4W Frequency max. 300kHz See also my other measurement technology articles

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: L705226, functionality: fully functional, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. TAIL STOCK Quill diameter: Ø105 mm. Quill travel: 220 mm. Quill taper: MT#5 ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post Csdpfx Acsvai Swjperh 4 Jaws Self-centering scrolling chuck Ø 12". Steady rest

Condition: excellent (used), mileage: 256,000 km, power: 315 kW (428.28 HP), first registration: 05/2016, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, fuel: diesel, brakes: intarder, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, trailer coupling, = Additional options and accessories = - Air suspension - Alloy wheels - Aluminium fuel tank - Central lubrication - Coupling - Heavy duty engine brake - PTO - Radio/CD player - Speed limiter - Toolbox - Visor = More information = Transmission Transmission: Automaat, 12 gears, Automatic Axle configuration Brakes: disc brakes Front axle 1: Tyre size: 385/65/22.5; Max. axle load: 9000 kg; Steering Front axle 2: Tyre size: 315/80/22.5; Max. axle load: 9000 kg Rear axle 1: Tyre size: 315/80/22.5; Max. axle load: 9000 kg Rear axle 2: Tyre size: 385/65/22.5; Lift axle; Max. axle load: 9000 kg; Steering Weights Empty weight: 17.960 kg Carrying capacity: 18.040 kg GVW: 36.000 kg Functional Crane: Palfinger Palfinger 26002 EH E, year of manufacture 2016, behind the cab Make of bodywork: Palift T20A SCAN Cedpfxjut Hv Nj Acporh Condition Technical condition: very good Visual appearance: very good

Condition: good (used), functionality: fully functional, Creaform Go! Scan Spark 3D scanner for precise digital capture of objects. The scanner can operate with or without reference markers. The scanner can capture the color/texture of objects. The system is housed in a case and can be used in mobile applications. The offer also includes a high-performance laptop with 128 GB of RAM, on which the scan software with a permanent license is installed. Codpfxeziqqie Acpjrh - Accuracy: up to 0.05 mm - Volumetric accuracy: up to 0.05 mm + 0.1 mm/m - Resolution: up to 0.1 mm - Used unit, year of manufacture 2022, in perfect working order and can be tested while powered on. - Includes laptop with VXElements scan software. This offer is only valid as long as the used unit is still available – please contact us for more information.

Condition: new, Catalog number: HZ014 – Preliminary milling – Edge trimming – New machine, in stock – CE certificate – Professional TECHNICAL DATA Panel thickness: 8-45mm Edge thickness: 0.4 mm – 3 mm Minimum panel width: 90mm Minimum panel length: 170mm Feed speed: 9m/min Preliminary milling: 12000 rpm Front/rear milling: 12000 rpm Top/bottom milling: 12000 rpm Edge trimming: 12000 rpm Polishing: 3000 rpm Feed motor power: 1.13kW Glue tank heating power: 1.315kW Preliminary milling power: 1.5kW Preliminary heating power: 0.4kW Glue spindle power: 0.25kW Front/rear milling power: 0.22kW Top/bottom milling power: 2×0.37kW Edge trimming power: 0.37kW Polishing motor: 0.12 kW and 0.18 kW Motor: 6.16kW Working height of the table: 960mm Extended support width: 560mm Dust extraction connection: 3x125mm Dimensions (L/W/H): 3731x720x1636mm Crjdpfx Aszruriscpoh Weight: 915kg The Holzing G-MAX 480 straight-line edge banding machine with preliminary milling, saw cutting, top/bottom milling, edge trimming, radius sanding, and polishing ensures a high-quality final finish on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23050 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Automatic change table system Cedpfx Aszz A A Iocperh Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Operating and programming manual Inspection while the system is running is welcome.

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Credpoz Ipq Nofx Acpsh Clamping unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, baghouse dust collector Power: 15 kW Airflow rate: 7,200 m³/h Number of collection bags: 3 Number of filter bags: 45 Filter bag diameter: 20 cm Credpfx Asz D Eqwocpjh Filter bag height: 150 cm

Condition: used, Year of construction: 1987, turning diameter 400 mm turning length 600 mm swing diameter 600 mm spindle bore 73 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Cedpoyutrusfx Acpjrh than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team