Used Scm 2000 D for sale (581)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: J10039) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Pedpfx Agsl Hycwjzsrf Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Pjdpex Dm Tvofx Agzsrf Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400

Condition: used, Ferwood Code: RU0001071 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Prsdpfxou U D Ahe Agzsf

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AL1/003895, travel distance X-axis: 2,949 mm, travel distance Y-axis: 1,353 mm, input voltage: 400 V, Working area: 2500 x 1240 mm Z-axis travel length: 200 mm Passage height: 180 mm Drilling unit: Drill head with 10 + 4 spindles 6 individually selectable vertical spindles in X 4 individually selectable vertical spindles in Y 2 horizontal spindles in X (1+1) 2 horizontal spindles in Y (1+1) Spindle speed: 4,000 rpm Power: 2.2 kW Prodpfxsxxik Ho Agzof Pitch: 32 mm Drill holder: M10 with 11 mm mounting face Extraction port: D=160 mm Milling spindle: Tool holder: HSK 63F Spindle speed: 1,500 – 24,000 rpm, stepless via inverter Motor power: 6.6 kW (9 HP from 12,000 rpm (S1)) Right/left rotation Ceramic bearings Prepared for automatic change of angle heads Grooving saw unit: Fixed in X-direction (longitudinal) Power: 2.2 kW (3 HP) Speed: 6,000 rpm Max. saw blade diameter: 160 mm Saw blade thickness: approx. 3.2–6 mm Saw blade bore: 30 mm Extraction port: D=200 mm Worktable: 4 supports, 900 mm, stepless manual adjustment in X 12 round vacuum pods, D=110 mm, stepless adjustment in Y (2 pods per support) 2 stops in X (1x left / 1x right) 1 stop in Y per support (total 6) Additional right-side stop with roller track for extending X-axis to 3,230 mm (2 clampings) Retractable reference stops are CNC-controlled Pendulum operation (2 working zones) Further technical data: Total connected load max.: 16 kW Recommended fuse: 64 A Power supply: 400 V (50 Hz) Compressed air: 7 bar System pressure: 10 bar Compressed air consumption: 150 nl/min Central extraction port with flap control: D=250 or D=300 mm Extraction speed: 30 m/sec Air consumption: 3,400 m³/h Vacuum: 3,000 Pascal Machine weight: approx. 2,700 kg Required floor space: approx. 6,400 x 2,970 mm Loading dimensions: 4,400 x 2,200 x 2,500 mm

Condition: good (used), Year of construction: 2011, For sale is a first-hand used SMC edge banding machine in good condition. Manufacturer: SMC Year of manufacture: 2011 Type: Olimpic S 2000 "Model A" Weight 2000 kg Feed rate: 12-18m/min Working height (panel thickness): 8-60mm Edge thickness: 0.4mm - 6mm - Flush trimming unit - Snipping unit - Surface scraper - Rounding unit all data without guarantee, sale only to commercial customers. Podpfxohf Acle Agzorf Inspection by appointment in Karlovarská 1415, 363 01 Ostrov, Czech Republic Collection in Ostrov (Czech Republic) or in 94424 Arnstorf (Germany)

Condition: excellent (used), 5.5 kW motor Scoring unit Psdpfx Agjw U Th Aszerf Table length: 200 cm Ground clearance: 133 cm

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer Safety and sound-proof enclosure - OPTIONAL No. 4+4 Vertical columns to support the working units Pedsifz H Nopfx Agzerf Min. useful working width (mm) 150 (ca.) Max. useful working width (mm) 3100 (ca.) Max. useful working thickness (mm) 180 (ca.) Distance between center-axes of the disappearing dogs (mm) 500 (ca.) Adjustable (min/max) feeding speed (m/min) 8-40 (ca.) No. 8 Working groups (for each machine's side): 1 Jumping Scoring Unit 1 Hogging Unit 1 Jumping Milling Unit 1 Milling-Shaping unit 1 Corners Rounding unit (contour trimming) with 2 vertical motors 1 Belt sanding unit (with abrasive disc) 1 Belt sanding units (with abrasive papers)

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Full SCM line Prodpfx Agot T Sq Eszsf

Condition: used, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Prjdpfx Aju U D N Ujgzef

Condition: good (used), Year of construction: 1993, functionality: fully functional, SCM D 80 K double tenoning machine, year 1993, hood on the left. Available for viewing at our premises. Machine price includes loading onto truck. Installation and commissioning at your workshop available at extra cost. Psdjw Avh Nspfx Agzsrf

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Max length workable: 2400 mm Max height workable: 250 mm Prsdpjw Iddujfx Agzef

Year of construction: 2015, condition: ready for operation (used), Main Drive Prodsx Nr Nispfx Agzef Number of axis 5 Movement X-Axis Movement 3100 mm Z-Axis Movement 160 mm Y-Axis Movement 1550 mm This 3-axis SCM PRATIX 25 CNC Wood Machining Centre was manufactured in 2015. It features a large working area of 3100x1550 mm, a 5-axis milling head, and dual tool changers with 10 and 16 positions. Equipped with a powerful 16.5 hp motor and a vacuum pump capacity of 100 m³, it supports HSK F63 clamping and Xilog Plus software. If you are looking to get high-quality milling capabilities consider the SCM PRATIX 25 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: used, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Podpfx Agsx Nigxszjrf - Machine available from: 2026-01-05 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2018, SCM Wide Belt Sander dmc sd 60 DMC60 RCS 110 AB /00003689 European safety regulations (CE marking) Voltage 400 V EU Frequency 50 Hz Sanding width: 1100 mm Version "B" for RCS Prsdpjx Nrwmjfx Agzjf Infeed and outfeed roller table for long workpieces Electronic programming unit "LOGIC SC" "RA" obliquely ribbed steel contact roller – 1st unit 2nd unit sanding pad unit Main motor 15 kW (20 HP) Location: at customer site - immediately available -

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Podsxy Tmnjpfx Agzerf

Condition: used, machine/vehicle number: 007929, X axis working area: 6360 mm Predjwgaz Uspfx Agzef Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36

Condition: ready for operation (used), Year of construction: 2018, Main Drive Predpjx Nr Sdefx Agzsf Spindle motor power 11 kW This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Application Types Sanding

Condition: excellent (used), Year of construction: 2018, MORBIDELLI M100 CNC Machining Center Working Area X-Y: 3,110 x 1,320 mm Max. workpiece height above suction cups: Z180 mm Technical Data Working range X axis: 3,110 mm * Working range Y axis: 1,320 mm * Panel passage Y: 1,600 mm Panel passage Z: 180 mm Pjdox Nrwgspfx Agzjrf Workpiece length for pendulum operation: 1,400 + 1,400 mm Travel speed of X-Y axes: PRO-SPACE: 56 m/min (184 ft/min) Travel speed of X-Y axes: PRO-SPEED: 78 m/min (256 ft/min) PRO-SPACE Safety Devices 1 Enables the machine to be installed without perimeter safety fencing, thereby reducing space requirements. The safety devices are mounted directly to the machine frame. Max. X-axis speed = 25 m/min. 63.03.73 "TECPAD wired" remote control with 7" touchscreen display Tool Changer TRB11 (configuration Y=1,320) Tool Changer FAST14 1 vacuum pump, capacity 250/300 m³/h at 50/60 Hz F31LTC drilling unit The F31LTC drilling head is equipped as follows: Connection for vertical and horizontal drills Ø 10 mm, WELDON type (max drill length = 70 mm) Distance between spindles: 32 mm 21 vertical spindles, selectable independently 5 horizontal drill heads with dual output (one on each side), 3 in X direction and 2 in Y direction Drill spindle speed: 4,500 rpm (with optional inverter 2,500–8,000 rpm) 1 integrated saw blade in X direction (max diameter 125 mm, thickness 2.2–6 mm) Saw blade speed: 5,500 rpm Drilling unit with inverter Pressure booster on the Z-axis 5-axis unit, version "JQX" 10 kW The 5-axis unit includes: HSK 63F tool holder with double reference surface for rigid connection between taper and electrospindle Standard electronic control of rotation speed from 1,800 to 24,000 rpm, with static inverter and quick stop function Continuous power (S1/S6): 8.5/10 kW (11.5/13.6 HP) from 12,000 rpm B-axis rotation: ± 185° B-axis rotation speed: 7,000°/min C-axis rotation: ± 320° C-axis rotation speed: 7,000°/min Right- and left-hand rotation programmable via NC Internal air blast to ensure optimal tool holder coupling Cooling system with circulating fluid and external heat exchanger Ceramic ball bearings on main spindle Internal pressurized air circuit to prevent contamination by dust Surrounding extraction hood for chip removal with pneumatic ON/OFF function Extraction hood for 5-axis electrospindle 6 "TV FLEX" worktables 1,300 Chip and waste conveyor belt for X=3,110 mm 4 loading aid devices H=75 1,300 Front stops H=75 for 6 supports Main front reference stop Vacuum suction cups 145x145 mm, H=75 mm – 12 pcs Vacuum suction cups 145x55 mm, H=75 mm, rotatable – 6 pcs Additional hardware dongle for Maestro CNC (for USB port) High-performance PC Location: ex works customer site - Immediately available - System must be dismantled by the seller

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm available as an option) · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm positive fit · Pneumatic feed stroke: 60 mm Grooving saw unit in "X": · Integrated in the drilling head · Grooving saw blade with a maximum diameter of 120 mm Main milling unit: · Tool interface HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) · Right-/left-hand rotation · Ceramic bearings · Prepared for use with angle drives Tool changer TR10: Automatic lateral tool changer for 10 tools. · Number of tool positions: 10 · Maximum tool diameter: 120 mm · Maximum weight per tool: 4.5 kg · Maximum total tool weight: 28 kg A central extraction port collects all processing units into a single connection with D=200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. TVF worktable: The worktable is designed to provide the operator with maximum "freedom of movement." The vacuum quick-clamping system offers maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports, L=1100 mm, infinitely adjustable in X · 12 TVF vacuum cups 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · Retractable reference stops controlled via CNC Automatic central lubrication: The correct amount of lubricating grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. negative pressure (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction port Ø: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h Prodpfxoxy Ndio Agzsf · Negative pressure: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L=1,100 mm and 18 vacuum cups 120x120 mm Cross lasers for vacuum cup positioning Two cross lasers mounted on the unit carrier allow for easy positioning of the vacuum cups. Location: Nattheim

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Predpfx Agsx A E Tfszef Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. Pjdpfex I S R Dex Agzsrf Application Types Edge Banding

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Pjdpfxow Dcccj Agzorf

Condition: used, machine/vehicle number: 007916, X axis working area: 6360 mm Pjdpfx Agjwfxkxszorf Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 007917, X axis working area: 5020 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36 Psdpowfxkrefx Agzjrf

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Pjdpfx Agew Idc Rszorf Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr