Used Scm 2000 D for sale (659)

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm Fsdpoy I Srzsfx Al Uepn - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Fedoz Nyp Hspfx Al Uepn Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Fpedszmtldspfx Al Usn Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Fsdpfxextxhko Al Uopn Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 Fedpoytcl Iefx Al Uspn - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM Sandya 1K Fodpfx Aloz I Iiko Uspn A combined unit with a steel roller and sanding shoe. Main motor: 11 kW. Machine in very good condition.

Condition: excellent (used), functionality: fully functional, Motor power 11 kW First calibration unit with steel roller Second unit with rubber roller Belt cleaning blow-off Working width 1100 mm Two feed speeds for sanding belts Stepless adjustable conveyor feed Electric table height adjustment Shoe with adjustable activation time Brush at workpiece outlet Pneumatic oscillation Fjdpfx Ajzz Nmysl Uspn

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Morbidelli X 400 cnc machine with flat (nesting) table Fpjdpfx Alsxqzm Dj Uen

Condition: good (used), Year of construction: 2007, machine/vehicle number: AA1/016112, functionality: fully functional, overall weight: 3,900 kg, table length: 3,050 mm, table width: 1,240 mm, Equipment: CE marking, documentation/manual, SCM RECORD 100 AL. 4 axis • 4 controlled axis: X, Y, Z y C X: 60 m/min Y: 45 m/min Z: 30 m/min • Aluminiun working table, nesting type: X: 3.050 mm Y: 1.240 mm • 2 working areas • 6 perimetral pneumatic reference cylinders • Vacuum pump BECKER: 250 m3/hour • Telecomand • XILOG PLUS software. Allows importing DXF files • Security fences Fsdezg H Sdopfx Al Ujpn • Security carpets • CE rules • Year 2007 ROUTER UNIT 8,5 kW / 11,5 HP 0 to 24.000 rpm Automatic Tool Change System HSK F-63 12 positions rotative tool magazine MULTIDRILL UNIT 7 vertical boring heads 1+1horizontal boring heads X 1+1horizontal boring heads Y 2.000 to 6.000 rpm SAW UNIT Cutting in X Diameter: 120 mm 3.500 to 7.500 rpm

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS Fpjdpfx Alst R T Hcs Ujn NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing Fjdpszug Sgefx Al Uspn • Scraper and edge scraper unit • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment Fpjdpfxszuhcgj Al Uon • Barcode reader • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, number of axes: 4, number of slots in tool magazine: 11, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, This 4-axis SCM Morbidelli Author M100 CNC Wood Machining Centre was manufactured in 2018. It features a working area along the X-axis of 3110 mm and a maximum panel height of 180 mm. The machine is equipped with 21 vertical spindles and 10 horizontal spindles, providing versatile machining capabilities. If you are looking to get high-quality wood machining capabilities, consider the SCM Morbidelli Author M100 machine we have for sale. Contact us for further details. • Working area / axes: • Panel length (Y): 1900 mm (2210 mm) • Panel height (Z): 180 mm • Panel length for through machining: 1400 mm • Vector speed X‑Y: Pro‑Space 56 m/min; Pro‑Speed 78 m/min • Worktable: 6–12 beams (TV Flex), 12 vacuum pods (145 × 145 × H75 mm); 2 stops per beam; movable beam length 1600 mm. • Drilling unit (general spec): • 21 vertical spindles, 8,000 rpm • 10 horizontal spindles, 8,000 rpm • Integrated saw Ø125 mm (X), 10,000 rpm • Motor power 2.2 kW • Electrospindle: 10 kW (S6), max 24,000 rpm. • Installation requirements: installed power 23–28.5 kVA; compressed air 450 NL/min; dust extraction 4500 m³/h, 25 m/s, outlet Ø250 mm. Fsdpfx Alsz A Ahqj Uspn • Structure and motion: • Heavy, stress‑relieved, electro‑welded steel frame; all machining in single setup on CNC metalworking machines. • High‑speed four‑row linear guides; three‑circuit recirculating ball systems; X‑axis helical rack‑and‑pinion. • Brushless motors, inverters; machining units mounted on mobile gantry for rigidity. • Transparent polycarbonate safety enclosure. • CNC control and software: • PC‑Office: Windows 7, 17" color LCD, QWERTY keyboard, mobile control panel, Xilog Maestro. • Xilog Maestro features: parametric/graphical/ISO programming; DXF/ASCII import (2D); 3D linear/circular interpolation; spatial linear interpolation; helical interpolation; guided editor; automatic drilling optimization and tool libraries; panel origin offset; simulation; barcode management (software); self‑diagnostics; step‑by‑step manual intervention; graphical unit configuration; machining speed selection; SCM CNC Jerk function. • Safety: CE; PRO‑SPACE system with safety bumpers (automatic stop on potential collision). • Table equipment included/mentioned: rear aluminum reference stops H75 per beam; second central reference stops per beam; front reference stops H75 per beam. • Vacuum system: integrated vacuum pump 90/108 m³/h, 50 Hz. • F23 L drilling unit (listed configuration): • Independent Z‑axis • 13 independent vertical spindles (8 X / 5 Y) • 6 independent horizontal spindles (quick‑release), incl. 4 in Y • 32 mm pitch • Speed 4,500–8,000 rpm (inverter) • Rear‑panel groove/saw unit Ø125 mm, 5,500–10,000 rpm (inverter) • Motor 2.2 kW • Increased Z‑pressure • RO AX advantages: high productivity, precision, finish quality, processing speed; up to 90% reduction in maintenance (approx. 1,000‑hour interval). Additional equipment • TRB14 side‑mounted tool magazine (optional), right side: • Capacity up to 11 tools; max Ø350 mm • Center distance 130 mm • Max tool weight 8 kg; total 48 kg • 4 workpiece lifting supports H75, two lifting levels (above clamps and working level), 20 kg per support • Additional hardware key with USB port

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 2,000 kg, SCM Sandya 7S wide belt sanding machine Working width: 1100 mm Sanding height: 4–160 mm Fpjdpfx Aozykr Uel Uen 1 metal sanding head, 11 kW 2 combi sanding heads, 11 kW Adjustable speed of the combi sanding head via frequency inverter Electric height adjustment Optical oscillation Adjustable feed speed via variator: 3–17 m/min Vacuum pump Technical documentation and CE certificate Year of manufacture: 2004

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of axes: 5, spindle motor power: 8,500 W, CNC Wood Machining Centre manufactured in 2005. This SCM Record 110AL features a working area of 3,060 mm in the X-axis and 1,240 mm in the Y-axis, with a maximum panel passage of 200 mm. It includes 18 total drilling spindles and a powerful 8.5 kW main electrospindle. If you are looking to get high-quality drilling and milling capabilities, consider the SCM Record 110AL machine we have for sale. Contact us for further details. • Processing type: Drilling and milling • Max. panel passage: 200 mm • Number of working fields: 2 • Table type: Flat table • Table configuration: Nesting • Table dimensions: 3,060 × 1,240 mm • Number of controlled axes: 5 • Drilling units: 1 • Vertical drilling spindles: 12 Fpsdpfjz Iy N Nex Al Uon • Horizontal drilling spindles, X-direction: 4 • Horizontal drilling spindles, Y-direction: 2 • Total drilling spindles: 18 • Milling spindles: 1 • Milling spindle controlled axes: 5 • Spindle cooling: Liquid cooling • Grooving units: 1 • Grooving unit: Fixed, X-direction • Main electrospindle power: 8.5 kW • Milling spindle power: 8.5 kW • Control: PC Control • Programming software: Xylog Plus • 16-position tool magazine • Automatic tool changer • CE marking Additional equipment • Vacuum pump: 1 (suction capacity 250 m³/h) • Suction cups for workpiece clamping • Front safety mats

Condition: used, Year of construction: 2008, functionality: fully functional, Sanding width 1100 mm Min. ÷ max. working height 4÷170 mm Sanding belt width 1115/1370 mm Sanding belt length 2150 mm 2 feed speeds 4.5-9 m/min Fsdpfx Aoxwwgyol Uopn Feed motor 0.45/0.8 kW Table adjustment motor power 0.25 kW Motor power (HP) for single or dual-head machines 11 kW (15) 50 Hz Operating pressure 6 bar

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Fedpew Dcccofx Al Uepn

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position Fpedpfxozuzbco Al Uen - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust combined jointer and thicknesser, SCM Type 2250. The machine impresses with its heavy-duty, solid construction, a planing width of 500 mm, and long jointer tables. The fold-up jointer tables allow for quick switching between jointing and thicknessing. Technical data: +Manufacturer: SCM +Type: 2250 +Planing width: approx. 500 mm +Total length of jointer tables: approx. 2,200 mm +Maximum thicknessing height: approx. 235 mm +Minimum thicknessing height: approx. 3 mm +Maximum material removal in thicknessing: approx. 8 mm +4-knife cutterhead +Cutterhead speed: approx. 4,500–5,000 rpm Fsdpfx Ajzz Nt Hol Uspn +Motor power: 5.5 kW +Two feed speeds: approx. 7.5 and 15 m/min +Fold-up jointer tables +Swiveling fence +Automatic workpiece feed in thicknessing +Dust extraction connection: 150 mm +Weight: approx. 890 kg +Space requirement: approx. 2,200 × 1,350 × 1,100 mm Scope of supply: +Operating manual +Parts list +Setting gauge +Replacement knives The machine is in used condition. Inspection and a test run are possible by prior appointment. Loading and transport can be arranged upon request. Location: 39340 Haldensleben Price: €4,350 net

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm Fpodpfx Alszrnwlj Uen weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, 4-5 axis CNC Still in operation Good maintained condition Numerically controlled cutting, drilling, and milling CNC machining center Comes with a 12-position tool magazine enabling various machining processes HSK 63 F tool holders and additional accessories as shown in the photos are included in the machine price Working axis dimensions: X 3400 x Y 1720 x Z approx. 400 mm Vacuum table dimensions: 3120 x 1200 mm Axes: X, Y, Z + rotation + option to purchase angled heads or additional tools Main motor power: 7.5 kW Working speed: 900 – 18,000 rpm Max tool diameter: 140 mm 2 x PC with Windows XP and ROUTOLINK software (second PC is a backup) Fpedpfevva T Djx Al Ujn 2 vacuum pumps Warranty and post-warranty service provided Price includes machine demonstration and operator training Original documentation CE safety standard Year of manufacture: 2001 Overall dimensions: 6865 x 3800 x 2350 mm Weight approx. 6000 kg

Condition: like new (used), Year of construction: 2025, We offer this as a new SCM Morbidelli CX110 CNC Drilling, year of construction 2025, still on warranty! Only a few months in use SCM Morbidelli CX110 CNC – 2025 CNC Drilling and Routing Center for Woodworking We offer for sale a brand-new SCM Morbidelli CX110, a high-performance CNC drilling and routing center designed for precise, flexible processing of wood panels and similar materials. Ideal for industrial production with high efficiency and accuracy. Fpodpfx Asy Hf H Nel Uen Machine Description The Morbidelli CX110 is a compact yet powerful CNC machining center, combining advanced drilling and routing capabilities. With a footprint of less than 10 m², it is perfect for workshops that require high performance in a limited space. Main Features 7.5 kW electrospindle (up to 24,000 rpm) RO.AX drilling unit (13 vertical + 5 horizontal spindles) Integrated saw blade 6-position automatic tool changer High precision and rigidity Suitable for drilling, routing, and cutting Control & Software eye-M PRIME integrated PC 24” Full HD touchscreen Maestro software (Active, Lab, Connect) Remote teleservice and IoT monitoring Technical Data 400V / 50Hz 31.5 kVA Max current: 46 A Commercial Details Condition: New (2025) Official price: 90,920 EUR Our price: 52,000 EUR (excl. VAT) Transport in EU: included on price Location: Kosovo Buyers are welcome to visit our factory and see the machine in operation under real production conditions. Dismantling and transport within EU countries are included in the price

Condition: ready for operation (used), Year of construction: 1995, SCM Type Hydro 3200 CE - compliant Sliding table 3200 mm Cutting width to the right of the saw blade 1250 mm Saw blade hydraulic lifting and tilting Tiltable up to 45 degrees Saw blade diameter 400 mm Fpedoy Sv Rpopfx Al Usn Blade bore 30 mm Motor 380 Volt, 50 Hz 5.5 kW Speeds 3000/4000/5000 rpm Scoring unit Top dust extraction hood Extraction diameter 80/120 mm Space requirements Length 3550 mm Width 2200 mm Height 1500 mm Weight 1000 kg Year of construction 1995 Functionally tested Available from early July Machine from training workshop More photos coming soon

Condition: used, Year of construction: 2004, Storage location: Nattheim Fsdpfovvi Hyjx Al Ujpn

Condition: used, Year of construction: 1999, functionality: fully functional, Well-maintained and refurbished SCM edgebander type K208 TERL available in our warehouse. The machine is in very good condition and fully equipped, including: Fodpeylxxnjfx Al Ujpn DIA pre-milling cutters Pair of end trimming units Pair of rough straight milling cutters Pair of fine tilting milling cutters Rondomat with 2 motors Radius scrapers Brushes The machine has been carefully maintained and is ready for operation. Price: €8,900 + VAT