Used Scm P 64 for sale (588)

Condition: excellent (used), SCM P64 Four-Sided Planer Working width: 180 mm Working height: 100 mm 4 spindles Spindle configuration: Bottom 4 kW Right/Left 5.5 kW Top 4 kW Spindle diameter: 35 mm Two-stage feed: 6-12 m/min Electric height adjustment Adjustable spindles Infeed table length: 2300 mm Pjdowyiyajpfx Ankept Machine dimensions: 3300x1200x1600 mm

Condition: repair required (used), Four-Side Planer / Moulder SCM P64 Specification: • Condition: Requires inspection, maintenance and minor repairs • Manufacturer: SCM • Model: P64 • Working width: 180 mm • Working height: 120 mm • Motors for vertical spindles: 1 x 9.0 kW • Motors for horizontal spindles: 4.0 and 5.5 kW • Feed motor: 1.5 kW • Electric adjustment for planing height • Manual adjustment for planing width • 4 spindles, diameter 35 mm • Vertical profiling heads, height adjustable (as in a spindle moulder) • Long infeed table, dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • Spring-loaded feed rollers • Table lubrication pump • Extraction ports Ø120 mm and Ø150 mm • Weight: approx. 1,110 kg • Overall dimensions: 332 x 113 x 170 cm (L x W x H) Additional information: • The machine requires inspection; it can be started but needs servicing, maintenance, and replacement of bearings, etc. Ppsdpewgdfqofx Ankjt • The attached photos show the actual condition of the machine for sale • Machine available immediately

Condition: ready for operation (used), SCM P64 four-sided planer planer table length 2300 mm planing width 180 mm planing height 105 mm Feed speed 6 and 12 m/min Ppodpst Dwg Tjfx Ankst spindle diameter 35 mm Axial planing head adjustment for profiling 15 mm Motor power planer 4 kW Thicknessing shaft motor power 4 kW Motor power right and left shaft 5.5 kW Weight 1200 kg Dimensions 2820 x 1220 x 1920 mm Condition: Checked for function. All shafts have new bearings Price 5500.

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Podsy Iwy Depfx Ankopt Serial number: AE/028708 Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Quick saw blade change system Independent main saw blade lifting THK precision linear guides Four additional clamps in the right-angle alignment zone Optimized saw blade extension PC operator interface in English

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) 240 Pedpfx Ajwhmdfenkspt Max. useful working width (mm) 3100 Min. useful working tickness (mm) 3 Max. useful working tickness (mm) 150 Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: AE00000087, functionality: fully functional, Brand and Model: SCM ACTION P Year of Manufacture: 2018 Condition: Lightly used, excellent condition Location: Croatia Key Technical Specifications: - Type: Automatic cabinet clamp with “comb” pressing system - Vertical and horizontal automatic clamping - Brushless motors: 2 kW (vertical), 1.5 kW (horizontal) - Positioning speed: up to 160 mm/s - Max pressing force: 1400 kg (vertical), 1600 kg (horizontal) - Working area: up to 2500 mm length, 1300 mm height, 800 mm depth - Installed power: 4 kW / 15 A - Weight: approx. 1800 kg - Machine dimensions: 4200 × 1200 × 2250 mm - Safety: Safety photocells on both sides Functionality: - Manual loading and unloading - Ideal for quick cabinet assembly in kitchens, bathrooms, and offices Price: €16,500 + VAT Notes: - The machine is in excellent working order and was lightly used - Perfect for manufacturers looking to optimize cabinet assembly Ppodpfx Asxr T N Tsnkjt - Available immediately For more information, pictures or viewing appointment – feel free to contact us.

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: AA2/001125, functionality: fully functional, planing width: 240 mm, overall weight: 2,400 kg, spindle diameter: 40 mm, number of spindles: 4, TECHNICAL DETAILS Min. planing width: 25 mm Max. planing width: 240 mm Min. planing height: 6 mm Max. planing height: 120 mm Number of spindles: 4 Spindle diameter: 40 mm Infeed table length: 2,000 mm Diameter of feed rollers: 140 mm Conveyor motor: 2.2 kW Diameter of dust extraction nozzle: 120 mm MACHINE DETAILS Voltage: 400 V Ppedpsy Tn Szsfx Ankst Power consumption: 58 A Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 3,500 mm x 1,800 mm x 1,650 mm Weight: 2,400 kg Motor (bottom): 5.5 kW Motor (right): 5.5 kW Motor (left): 5.5 kW Motor (top): 7.5 kW EQUIPMENT Documentation

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Ppjdsx A E Tfepfx Ankst Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Max length workable: 2400 mm Max height workable: 250 mm Ppodew Idduopfx Ankot

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Ppodpow Idc Refx Anket Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Spindle moulder SCM T130 NPS - used - fine-adjustable fence, tenoning and slotting table, right-/left-hand rotation ----- Technical Data ----- Table size: 1,080 x 750 mm, Ppedsw Nv Nfepfx Anket Spindle diameter: 30 mm, Speeds: 3,000/4,500/6,000/7,000/10,000 rpm, Extraction port Ø: 120 mm, Lower extraction port Ø: 120 mm

Condition: excellent (used), Catalog number 7713 TECHNICAL DATA - max. width of workpiece 240mm - max. height of workpiece 130mm - 6 spindles: 1) horizontal lower 240mm, 7.5kW 2) vertical right 130mm, 5.5kW 3) vertical left 130mm, 5.5kW 4) horizontal upper 240mm, 7.5kW 5) horizontal upper 240mm, 5.5kW Spindles 4 and 5 are electrically adjustable up/down 6) horizontal lower 240mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm *top: - 8 metal feed rollers, toothed, including 3 double rollers - 4 smooth rubber feed rollers, including 2 double rollers *bottom: - 3 smooth feed rollers - 3 side pressure rollers - stepless feed speed adjustment via inverter - rollers with pneumatic pressure - feed motor 7.5kW - feed via Cardan shafts - electric adjustment of planing thickness - body lifting motor 0.75kW - length of infeed table 2480mm - pneumatic opening/closing of the guard - pneumatic blowing of the table - central lubrication of the table - diameter of dust extraction nozzles 3x120mm, 3x150mm - dimensions L/W/H 5300x1700x1800mm - weight 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the guard - Pneumatic blowing of the table - Spindles 4 and 5 are electrically adjustable - Used planer, very good condition Psdezab Eyspfx Ankept Net price: 116900 PLN Net price: 27850 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Pjdpfx Anjw Idbyskopt Position 5: Ovens SCM-BRAVOROBOT P1

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld Psdpsvvi Htofx Ankept

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Ppsdpfx Anjx Twcveket

Condition: good (used), Year of construction: 2008, SCM ERGON L TOP Podsy U T Ikjpfx Ankept Aluminum slat table, 2x (2125 x 3120 mm) CNC-controlled X, Y, and Z axes X - 7685 mm Y - 4490 mm Z - 400 mm 4 vacuum pumps 2 x 15 kW spindles HSK-63-F 2 x F9 drilling heads MAESTRO software (One spindle has been overhauled by SCM Italia) Sold on behalf of a customer. Immediately available. Disassembly and loading can be arranged upon request. Transportation costs are additional.

Condition: ready for operation (used), Year of construction: 2003, number of axes: 3, This 3-axis SCM PRATIX 48 NST was manufactured in 2003. It features a working area of approximately 1220 x 2440 mm and is equipped with a vacuum nesting table. The machine includes an HSK electrospindle with a power range of 7.5–9 kW and a tool changer, either linear or side-mounted. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM PRATIX 48 NST machine we have for sale. Contact us for further details. • Working area: approx. 4' × 8' (1220 × 2440 mm) • Table: Vacuum nesting table • Spindle: HSK electrospindle, 7.5–9 kW Ppedsy R Rp Djpfx Ankst • Tool changer: Linear or side-mounted ATC • Drilling block: Vertical drills (standard) • Controller: SCM Xilog

Condition: excellent (used), functionality: fully functional, SCM Superset XL Four-Sided Planer Working width: 15–230 mm Working height: 6–120 mm Number of spindles: 5 Spindle arrangement: Ppodpfxey Ttryo Ankst Bottom Right Left Top Bottom Spindle speed: 6,000 rpm Pneumatic pressure rollers Feed speed adjustable via variator: 5–25 m/min Driven by cardan shafts CE certificate

Condition: used, Year of construction: 2006, Empty weight: 4.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-05-25 - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat Ppsdex Hfikjpfx Ankot - Vacuum pump present: Yes - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor, Manual control - Table length [mm]: 3050 - Table width [mm]: 1240 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2017, Code: 0384 Brand: SCM Model: SI 400 EP NOVA - CE Standard Electronic 3-axis controlled panel saw with scoring unit for panels, furniture, custom-made furniture , window and door frames, wooden doors, carpentry, plastics, composite materials and various – CE Standard – Year 2017 Technical data: Sliding aluminium alloy carriage length 3200 mm Fixed table dimensions 1040 x 630 mm Squaring capacity 3200 x 3200 mm Blade tilt from 90° to 45° Max blade diameter 400 mm Hole 30 Scoring unit blade diameter 120 mm Hole 30 Max cutting height at 90° 140 mm Max cutting height at 45° 99 mm Blade rotation speed 3000/4000/5000 rpm Scoring blade rotation speed 8500 rpm Cutting width with parallel guide 1270 mm Ppsdsy R N Sdjpfx Ankot Blade motor power 7 Kw Scoring motor power 0,9 Kw Suction inlet diameter under the table 120 mm Suction inlet diameter on the suspended protective hood 80 mm Table extension Parallelogram guard 3 controlled axis: blade lifting - blade tilting - parallel guide Overall dimensions of assembled machine mm 3400 x 3900 x 1600 h Overall dimensions for transport mm 3400 x 2200 x 1600 h Weight kg 780

Condition: used, Year of construction: 2002, total width: 1,550 mm, total height: 1,500 mm, Colour: Grey Dimensions (LxBxH): 325 x 155 x 150 cm Four-sided moulder SCM Compact 23K Built in 2002 Min/max working height 120mm Min/max working width 230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 100/180mm Input table length 2500mm CNC Program Engines 1st Spindle - Under 5.5kW 2nd/3rd Spindle - Left/Right 11kW 4th Spindle - Up 7,5kW Pjdpewnhk Tofx Ankjpt Dimensions 3250x1550x1500mm (LxWxH), Weight 1800kg - Year: 2002 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 3250mm x 1550mm x 1500mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Colour: Grey Price: On request - Details: - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: - - Tools available: Yes - └ 8th unit type: Ppjdpfx Ajyll Snsnkjt - - Tools available: Yes - └ 9th unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, SCM Superset XL four-sided planer Working width: 15-230 mm Working height: 6-120 mm Number of spindles: 6 Spindle configuration: Bottom Right Ppodpfx Ajy Sr Nnjnkst Left Top Bottom Universal / glazing bead saw unit Spindle speed: 6000 rpm Pneumatic pressure rollers Feed speed adjustable via inverter: 5-25 m/min Drive via cardan shafts CE certificate

Condition: excellent (used), Catalog number: 6368 TECHNICAL DATA - Max width of the workpiece: 230mm - Max height of the workpiece: 130mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 130mm, 5.5kW 3) Vertical, left: 130mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 11kW 6) Horizontal, lower: 230mm, 18.5kW 7) Universal: 230mm, adjustable at 360 degrees, 5.5kW - All spindles adjustable up/down, left/right - All spindles equipped with an electric brake - Spindle diameter: 40mm - Spindles 4 and 5 adjustable electrically up/down - Top: 8 metal, torsion-type, infeed rollers, including 2 double rollers - Top: 4 rubber, outfeed rollers - Top: 2 pressure rollers - Bottom: Latches - Bottom, side: 3 pressure rollers - Bottom: 2 metal, smooth, infeed rollers - Bottom: 2 double, rubber, infeed rollers - Rollers pneumatically pressed - Feed via Cardan shafts - Stepless feed speed adjustment: 5-36m/min - Feed motor: 4kW - Electric adjustment of planing thickness: 0.75kW - Length of infeed table: 1980mm - Enclosed in a cabinet - Central lubrication of the table Podpfx Aey N Agxsnkjpt - Dust extraction nozzle diameters: 5x120mm, 2x150mm - Dimensions (L/W/H): 5500x1840x1900mm - Weight: approx. 5000kg ADVANTAGES – Made in Italy – With 7 heads – For wet and dry wood – Last spindle is universal – Unpainted – Used planer, very good condition Net price: 136900 PLN Net price: 32600 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary depending on higher fluctuations)

Condition: used, machine/vehicle number: 008391, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 28 m/min Ppjdpoygta Nefx Ankot Maximum panel thickness: 60 mm Operating Units: 7 nr