Used Scm Si 150 for sale (580)

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 140 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom 5.5 kW Lodpfjqv Awiox Agzshr right + left 11 kW top 7.5 kW feed 3 kW Manual adjustment of all heads Number of top steel pulling rollers: 4 Number of top rubber pulling rollers: 1 1 rubber roller in the top Extraction spigot diameter: 130/150 mm Infinitely adjustable feed rate: 4-26 m./min Feed on gimbals Working table lubrication pump Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Overall dimensions: Length: 4180 mm Width: 1720 mm Height: 1740 mm

Condition: used, Four-Side Planer Moulder SCM P64/B Specification: • Condition – after inspection, ready for operation Lodpfx Aowzyc Ujgzohr • Manufacturer – SCM • Model – P64 • Working width – 180 mm • Working height – 120 mm • Motors on vertical spindles – 1 x 5.5 kW • Motors on horizontal spindles – 4.0 and 5.5 kW • Feed motor – 1.5 kW • Total power – 16.5 kW • Electric adjustment of planing height • Manual adjustment of planing width • 4 spindles with 35 mm diameter • 4 standard disposable-knife cutterheads 50x12x1.5 mm • Vertical profiling heads adjustable up/down (like a low-spindle shaper) • Long infeed table, dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • Roller pressure on springs • Worktable lubrication pump • Dust extraction nozzles ø 120 and 150 mm • Weight – approx. 1,110 kg • Overall dimensions 332 x 113 x 170 cm (length x width x height) Additional Information: • The machine is in good technical condition, ready for immediate use • The photos shown display the actual condition of the item offered for sale • The machine is available immediately

Condition: ready for operation (used), Four-sided planer SCM P64 profiler Specification: • condition - after inspection, ready to work • manufacturer - SCM • model - P64 • working width - 180mm • working height - 120 mm • motors on vertical spindles - 1 x 5.5 kW • motors on horizontal spindles - 4.0 and 5.5 kW • feed motor - 1.5 kW • total power 16.5 kW • electric adjustment of planing height • manual adjustment of planing width • 4 spindles of 35 mm diameter • 4 segment heads included • vertical profiling heads, adjustable up/down (as in a low-spindle milling machine) • long insert table with dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • roller pressure on springs • pump for lubricating the table top • extraction nozzles fi 120 and 150 mm • weight - approx. 1110 kg • dimensions 332 x 113 x 170 cm (length x width x height) Additional information: • the machine is in good technical condition, ready for immediate use Lhedpfx Aswigg Aogzjr • the photos show the actual condition of the item for sale • the machine is available immediately

Condition: good (used), Technical Specifications: • Minimum panel width: 55 mm • Minimum panel length: 140 mm • Panel thickness (min/max): 10 - 60 mm • Edge thickness: 0.4 - 3 mm • Maximum strip thickness: 12 mm Components and Functions: Lhedpfx Agoi E S Rlszor Composition Grinding units eeders End trimmers Trimmers Corner rounders Edge scrapers Brushes

Condition: excellent (used), SCM Machining center Lsdpfxjwmxkus Agzehr

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, Four-sided planer/moulder with 6 spindles, fully refurbished in 2025 (zero operating hours post-refurbishment), manufacturer SCM, Superset model. This professional industrial equipment delivers high-precision solid wood processing, ideal for workshops or factories seeking superior performance and long-term reliability in solid wood machining. The machine represents a modern technological solution, originally manufactured in 2003 by renowned Italian producer SCM, and brought up to current standards through a thorough refurbishment—zero operating hours since overhaul. We guarantee quality and operational safety, comparable to a new machine. Main technical specifications: Maximum working width: 240 mm (adjustable from 15 mm) Maximum working height: 160 mm (adjustable from 10 mm) 6 independent processing spindles, each with its own motor and electronic braking First lower horizontal spindle: 5.5 kW, Ø 40 mm, 8300 rpm Right vertical spindle: 5.5 kW, Ø 40 mm, length 170 mm, 8300 rpm Left vertical spindle: 5.5 kW, Ø 40 mm, length 170 mm, 8300 rpm Upper horizontal spindle: 11 kW, Ø 40 mm, length 170 mm, 8300 rpm Second upper horizontal spindle: 13.8 kW with inverter, Ø 40 mm, length 170 mm, 10,000 rpm Second lower horizontal spindle: 5.5 kW, Ø 40 mm, length 240 mm, 8300 rpm Feed System: Cardan shaft transmission, each unit equipped with its own feed roller and universal joint Feed motor: 4 kW with electronic brake Continuously variable feed speed with frequency inverter: 6–30 m/min Upgraded electric cabinet with advanced safety systems and improved ergonomics for easy operation and maintenance. Main advantages: High precision and versatility for ripping, planing, and profiling solid wood, regardless of complexity Reliability assured by complete refurbishment and premium-quality components Optimized cost compared to new equipment, with no compromise on performance Financing option: 5-year leasing for flexible investment management Ledpfxsw Emlwo Agzshr Recommended applications: Production of tongue and groove boards, solid wood flooring, beams, battens, planks, mouldings, and other solid wood products Ideal for carpentry workshops, joinery factories, manufacturers of doors, windows, furniture, industrial production of finished lumber

Condition: repair required (used), Four-sided planer SCM P64 profiler Specification: • condition - for inspection, requires maintenance and minor repairs • manufacturer - SCM • model - P64 • working width - 180mm • working height - 120 mm • motors on vertical spindles - 1 x 5.5 kW • motors on horizontal spindles - 4.0 and 5.5 kW • feed motor - 1.5 kW • total power 16.5 kW • electric adjustment of planing height • manual adjustment of planing width • 4 spindles of 35 mm diameter • vertical profiling heads, adjustable up/down (as in a low-spindle milling machine) • long insert table with dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • spring-loaded roller pressure Ljdpfx Aowgdfqogzshr • tabletop lubrication pump • 120 and 150 mm extraction nozzles • weight - approx. 1110 kg • overall dimensions 332 x 113 x 170 cm (length x width x height) Additional information: • the machine requires inspection, it can be started but requires inspection, maintenance, replacement of bearings, etc. • the photos shown show the actual condition of the item for sale • the machine is available immediately

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Lhodpfx Ajw Idduogzer Max length workable: 2400 mm Max height workable: 250 mm

Year of construction: 2015, condition: ready for operation (used), Main Drive Number of axis 5 Movement Lhodpfxsx Nr Nij Agzor X-Axis Movement 3100 mm Z-Axis Movement 160 mm Y-Axis Movement 1550 mm This 3-axis SCM PRATIX 25 CNC Wood Machining Centre was manufactured in 2015. It features a large working area of 3100x1550 mm, a 5-axis milling head, and dual tool changers with 10 and 16 positions. Equipped with a powerful 16.5 hp motor and a vacuum pump capacity of 100 m³, it supports HSK F63 clamping and Xilog Plus software. If you are looking to get high-quality milling capabilities consider the SCM PRATIX 25 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: used, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-01-05 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lsdpfx Agox Nigxszehr Glenn Smeets

Condition: excellent (used), Year of construction: 2018, SCM Wide Belt Sander dmc sd 60 DMC60 RCS 110 Lsdpfx Asx Nrwmegzjhr AB /00003689 European safety regulations (CE marking) Voltage 400 V EU Frequency 50 Hz Sanding width: 1100 mm Version "B" for RCS Infeed and outfeed roller table for long workpieces Electronic programming unit "LOGIC SC" "RA" obliquely ribbed steel contact roller – 1st unit 2nd unit sanding pad unit Main motor 15 kW (20 HP) Location: at customer site - immediately available -

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power Lhjdjx Nbzuopfx Agzjr - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: used, functionality: fully functional, planing width: 520 mm, total length: 3,100 mm, total height: 1,500 mm, total width: 800 mm, overall weight: 900 kg, table length: 3,050 mm, planer shaft diameter: 120 mm, working width: 520 mm, number of planer blades: 4, – CE marking – machine as new TECHNICAL SPECIFICATIONS – max. planing width: 520 mm – cutterhead diameter: 120 mm – 4-knife cutterhead – TERSA knives – noise reduction comb at cutterhead Lhjdpsw Iqa Njfx Agzer – jointer shaft guard – table width: 51 cm – table length: 305 cm – hydraulic lifting by pedal – height counter – motor: 7.5 kW – tilting fence – manual star-delta switch – extraction port connection: 120 mm – two adjustable tables – quiet operation – full factory cast iron body – original factory paint – dimensions (L/W/H): 310 x 70 x 150 cm – weight: 900 kg

Condition: used, machine/vehicle number: 007929, X axis working area: 6360 mm Ledpfx Agewgaz Ujzohr Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle motor power 11 kW This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Lsdjx Nr Sdspfx Agzjhr Application Types Sanding

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Lhodpfjxyl U Rex Agzjr

Condition: excellent (used), Year of construction: 2018, MORBIDELLI M100 CNC Machining Center Working Area X-Y: 3,110 x 1,320 mm Max. workpiece height above suction cups: Z180 mm Technical Data Working range X axis: 3,110 mm * Working range Y axis: 1,320 mm * Panel passage Y: 1,600 mm Panel passage Z: 180 mm Workpiece length for pendulum operation: 1,400 + 1,400 mm Travel speed of X-Y axes: PRO-SPACE: 56 m/min (184 ft/min) Travel speed of X-Y axes: PRO-SPEED: 78 m/min (256 ft/min) PRO-SPACE Safety Devices 1 Enables the machine to be installed without perimeter safety fencing, thereby reducing space requirements. The safety devices are mounted directly to the machine frame. Max. X-axis speed = 25 m/min. 63.03.73 "TECPAD wired" remote control with 7" touchscreen display Tool Changer TRB11 (configuration Y=1,320) Tool Changer FAST14 1 vacuum pump, capacity 250/300 m³/h at 50/60 Hz F31LTC drilling unit The F31LTC drilling head is equipped as follows: Connection for vertical and horizontal drills Ø 10 mm, WELDON type (max drill length = 70 mm) Distance between spindles: 32 mm 21 vertical spindles, selectable independently 5 horizontal drill heads with dual output (one on each side), 3 in X direction and 2 in Y direction Drill spindle speed: 4,500 rpm (with optional inverter 2,500–8,000 rpm) 1 integrated saw blade in X direction (max diameter 125 mm, thickness 2.2–6 mm) Saw blade speed: 5,500 rpm Drilling unit with inverter Pressure booster on the Z-axis 5-axis unit, version "JQX" 10 kW The 5-axis unit includes: HSK 63F tool holder with double reference surface for rigid connection between taper and electrospindle Standard electronic control of rotation speed from 1,800 to 24,000 rpm, with static inverter and quick stop function Continuous power (S1/S6): 8.5/10 kW (11.5/13.6 HP) from 12,000 rpm B-axis rotation: ± 185° B-axis rotation speed: 7,000°/min C-axis rotation: ± 320° C-axis rotation speed: 7,000°/min Lhedpfx Agsx Nrwgozjr Right- and left-hand rotation programmable via NC Internal air blast to ensure optimal tool holder coupling Cooling system with circulating fluid and external heat exchanger Ceramic ball bearings on main spindle Internal pressurized air circuit to prevent contamination by dust Surrounding extraction hood for chip removal with pneumatic ON/OFF function Extraction hood for 5-axis electrospindle 6 "TV FLEX" worktables 1,300 Chip and waste conveyor belt for X=3,110 mm 4 loading aid devices H=75 1,300 Front stops H=75 for 6 supports Main front reference stop Vacuum suction cups 145x145 mm, H=75 mm – 12 pcs Vacuum suction cups 145x55 mm, H=75 mm, rotatable – 6 pcs Additional hardware dongle for Maestro CNC (for USB port) High-performance PC Location: ex works customer site - Immediately available - System must be dismantled by the seller

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15 Lhodpfxex A E Tfe Agzer

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. Lodpfxjx I S R Ds Agzohr Application Types Edge Banding

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Lsdpfxovvi I Rj Agzjhr

Condition: used, machine/vehicle number: 007916, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Ljdpfx Agjwfxkxozohr Number of controlled axes: 5 axes Total number of tool changer positions: 36

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Lhedpovwbp Aofx Agzer

Condition: used, machine/vehicle number: 007917, X axis working area: 5020 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36 Lhsdpfx Agewfxkrjzor

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Lhsdpfxsvvi Hto Agzjr Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld

Condition: used, Year of construction: 2004, Storage location: Nattheim Lhsdpfxovvi Hyj Agzor