Used Selco Beam Saw for sale (18)

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 123 mm Fgodowuz Dyspfx Apwof No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes Fgodpfx Apjy Nk Dfjwef

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Fgodpfemt Hhwox Apwef Total installed power 20 KW

Condition: used, Year of construction: 2008, power: 36 kW (48.95 HP), cutting height (max.): 105 mm, cutting width (max.): 4,400 mm, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Fsdpozmtnxsfx Apwjgf Max. panel width: 4,400 mm Max. panel length: 2,200 mm Max. cutting height: 105 mm Thin panel feed: Yes Post-forming process: Yes Gripper system Number of grippers: 10 Flexible, NC-positionable grippers: Yes Grippers on the sliding stop: Yes Sawing unit Main saw blade overhang: 120 mm Max. saw blade overhang: 120 mm Max. tool diameter, main saw: 450 mm Scoring unit: Yes Post-forming scoring unit: Yes Max. tool diameter, scoring saw: 300 mm Max. feed rate: 130 m/min MACHINE DETAILS Control system: Windows Machine programming software: OSI Total connected load: 36 kW EQUIPMENT CE marking Tilting table with 4 tables Saw carriage 1 Barcode label printer Zebra S4M The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8409

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 152 mm No of Grippers: 11 Fgjdjvrrldjpfx Apwof Thin sheet loading: yes

Condition: used, machine/vehicle number: 008546, Max. panel width: 2200 mm Max. panel length: 3800 mm Fgsdpfxjzq Urao Apwjf Main saw blade projection: 123 mm No of Grippers: 7

Condition: used, machine/vehicle number: 008637, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 95 mm Fgjdpfxszg Uztj Apwef No of Grippers: 10

Condition: used, machine/vehicle number: 008158, Max. panel width: 2200 mm Fgsdpfxjy Nku Ds Apwof Max. panel length: 4300 mm Main saw blade projection: 120 mm No of Grippers: 9 Second flexible pusher: yes Panel Rotation Station: yes Thin sheet loading: yes

Condition: used, machine/vehicle number: 007671, Max. panel width: 3800 mm Max. panel length: 3800 mm Fgedpfowuufdsx Apwof No of Grippers: 7

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Cutting length: 4500 mm Cutting depth: 2200 mm Blade overhang: 95 mm Main blade unit Scoring blade unit Number of clamps: 9 1 front table with air cushion system 3 front tables with air cushion system Control system: Biesse OSI Plus Label printer Rear lifting table Fsdpfszaah Tex Apwogf Available at the end of July.

Condition: used, functionality: fully functional, The Selco NEOMIG 242 is a classic, extremely robust MIG/MAG welding machine from the Italian premium manufacturer Selco (which was acquired by voestalpine Böhler Welding several years ago). Unlike modern, fully digital inverter machines, this is a stepped, electromechanical transformer system. This means that it is considerably heavier and larger than a modern compact inverter, but it is considered practically indestructible in metalworking shops and workshops, with an enormous service life and a very stable arc. Technical data at a glance Feature Value / Specification Welding process MIG/MAG (gas-shielded welding) Connection voltage 400 V (3-phase / three-phase) Welding current range 30 – 240 A Duty cycle 30% at 240 A60% at 170 A100% at 131 A Voltage levels Multi-stage, manually adjustable Fgodpfxszd S Ryj Apwof Wire feed Integrated, mechanical roller feed Max. power consumption approx. 8.3 kW Cooling Typically gas-cooled (standard hose package) Important features & practical advantages Classic transformer technology: Since no sensitive electronics are installed in the power unit, the NEOMIG 242 tolerates dust, metal grinding dirt and moisture much better than modern inverters. It also operates absolutely reliably under harsh conditions in the workshop or on-site. Excellent welding properties: Selco was known in the industry for its perfectly matched copper transformers and chokes. The system provides a very spatter-free, smooth and even arc in steel, stainless steel and also in thinner aluminum applications. Intuitive operation without unnecessary features: No complicated digital menus. You select the appropriate welding level, adjust the wire speed on the potentiometer and can start immediately. Using toggle switches, modes such as 2-cycle / 4-cycle (for long seams) as well as spot and interval welding can also be activated. Used market assessment: Since this series is no longer produced new, it is a real insider tip on the used market for workshops and ambitious DIY enthusiasts. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Year of construction: 2000, condition: used, TIG welding machine, DC, 380 volts, for stainless steel. Fgjdpfxjgt Auue Apwjf Arkoquad 220, 40% duty cycle at 220 amps, 10% duty cycle at 140 amps, with torch. Ground cable, pressure reducer, water cooling.

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Fjdjukhd Aopfx Apwjgf Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, cutting width (max.): 4,500 mm, feed rate X-axis: 140 m/min, section length (max.): 2,200 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum saw unit tool diameter: 380 mm Maximum scorer tool diameter: 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of cross cut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Scorer unit 1 connected load: 2.2 kW Scorer unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, safety, and operation of the machine at the place of destination. Fgedpsyxn Adofx Apwjf External reference: 5711

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible Fsdpfx Aoxranpepwjgf COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min MACHINE DETAILS Control system: Windows XP Machine programming software: OSI Fodpoyqydcefx Apwjgf FEATURES Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. External reference: 8158

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Fjdpfx Aext Sgtepwegf

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Fjdpfx Aeuc Idxopwogf Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels