Used Self Propelled for sale (2,184)

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Knedoz Smy Sopfx Ahasc Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.

Condition: new, ∗JCB TM180 SV C New Vehicle∗ - JCB Diesel by Kohler [48KW/64HP] - Emission Stage V with DPF - Lifting Height: 4.53 m - Rated Payload: 1,800 kg - 2-stage hydrostatic drive – 20 km/h - Tyres: GOODYEAR POWERLOAD 365/70R18 - Comfort Cab (ROPS/FOPS) - Radio pre-installation - Adjustable steering wheel - Fully opening windows - Heating - SELF-LOCKING DIFFERENTIAL FRONT AND REAR Front axle = 45% Knodpfjyfvmvex Ahasc Rear axle = 25% - Servo single-lever control - Euro quick coupler - Fork carriage with 1,200 mm pallet forks - LED work lights front/rear/boom - Yellow rotating beacon - Right & left armrest - Roof-mounted wiper - Extended seat backrest Immediately operational, numerous additional attachments in stock. An appointment for viewing is expressly requested. On request, we will gladly provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (phone) will be happy to assist you. Further information available on our homepage. Subject to errors and prior sale! BSS, Quick-coupler, Road approval = Further Information = Please contact Tobias Ebert for more information.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber for performing temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climatic test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The efficient air circulation with a correspondingly high air exchange rate guarantees good heat transfer to the test specimen. The air handling unit is located on the rear of the interior chamber. The components are located in a separate frame behind the device and are easily accessible. The control system is housed in a separate control cabinet. The operating panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air using a fan.   Technical Performance Data:   Temperature Tests: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.5 to 1 K over time Temperature change rate: linear, depending on the test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climatic Tests:   Temperature range: +10 °C to +90 °C Humidity range: 10 % to 95 % relative humidity in the dew point range: +5 °C to +89 °C Temperature deviation: ± 0.5 K over time Humidity deviation: ±1 to ±3 % RH over time   The technical data refers to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm   Ksdszizmnjpfx Ahaenc Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class: IP 54   Technical Design:   Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by appointment (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See image)   (Changes and errors in the technical data and specifications are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, For sale: one Dräger PSS BG4 self-contained breathing apparatus (SCBA). This is a professional, closed-circuit regenerative breathing apparatus designed to protect the respiratory system during demanding rescue operations. Knsdpfxjz Spg Ao Ahasc Features: * Manufacturer: Dräger * Model: PSS BG4 * Oxygen supply from a cylinder. * Backpack design with harness and waist belt. * Applications: mine rescue, fire fighting, and industrial rescue. Included equipment: * Cylinder with valve, * Breathing hoses, * Breathing bag, * Internal apparatus components, * Frame with harness. Condition: used, with visible signs of wear.

Condition: used, Fixed table 850 x 1100mm in grey cast iron - Table height 900mm - 3.3m sliding table, anodised aluminium construction, wear resistant tempered guides with self cleaning design. Replaceable table edge. Infinitely locking design - Min / max blade dia 250mm - 400mm giving 130mm max cutting height at 90 degrees 30mm bore with 2 x 8mm drive pins / 60mm ctres. - 5.5kw motor 4000 / 4800 / 6000 rpm rotation speed - Blade tilting up to 46 degrees - Power rise / fall / tilt, with rapid and slow creep movement - Riving knife mounted saw guar - Pro lock quick change system of the saw blade - Rip fence with easy sliding movement thanks to four grooved ball bearings. Micro metric adjustment and scale. Movement via handwheel - Cutting width - blade to rip fence 1350mm Knedpfx Ahsz N Hcmoajc - Cross cut fence in anodised aluminium with continuous support, micro adjustment for both flip stop. Cutting length 95 to 2000mm, can be extended to 3220mm - Cross cut table in galvanised steel construction - Operating controls easily accessible on main frame - Dust extraction connection 100mm on overhead guard and 120mm dia in machine frame - 2 x riving knives 3.5" TFT overhead control unit at eye level with keyboard. - Electronic control of cutting height / cutting angle in program memory - Tool calculation including storage of 50 blades - Memory of 10 cut lists each with 50 cutting lines - FK for shortcut to frequently used functions - USB interface -2 axis scoring saw electrically adjustable. Scoring saw height and left / right position can be electrically adjusted while blade is running. Pneumatic lifting / lowering - Handndwheel adjustment of the rip fence and digital indication in control panel - 1 x 350mm dia main blade and solid scoring blade - 3.3m sliding table - Parallelogram crosscut table with analogue stop - LCD readout of angle setting

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for roll and strip material Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!) Knsdjy Emw Hopfx Ahaoc

Condition: used, lifting height: 1,790 mm, fuel type: electric, General information Year of manufacture: 2012 Drivetrain Drive: Wheel Weights Empty weight: 780 kg Functional Lifting capacity: 227 kg Working height: 566 cm Dimensions of cargo space: 138 x 77 x 179 cm CE mark: yes Condition General condition: average Knedev Tkngopfx Ahaoc Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: CA Additional information Please contact Christian Theißen for more information Manufacturer: Skyjack Model: SJ12 Year of build: 2012 Condition: Used Data: Max. working height: 5,66 m Platform height: 3,66 m Lifting capacity: 227 kg Platform dimensions LxW: 0,98 x 0,67 m Transport dimensions LxWxH: 1,38 x 0,77 x 1,79 m Tyres: white tires Movable up to working height: 5,66 m Ground clearance: 0,05 m Drive type: Battery Own weight: 780 kg Special features: The platform can be extended 42 cm outward, has a low self-weight, and features 2 attachment points for restraint systems (PPE). Location: 41468 Neuss immediately available

Condition: excellent (used), operating hours: 524 h, fuel type: hybrid, color: red, General information Year of manufacture: 2021 Drivetrain Drive: Track Weights Empty weight: 2.895 kg Functional Lifting capacity: 300 kg Working height: 1.000 cm Dimensions of cargo space: 226 x 146 x 208 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: IT Surface type: Rough terrain Kodpfx Aextn Dzohaenc Additional information Please contact Vink Machinery for more information AlmaCrawler BIBI 1090-BL EVO * 2021 * 524 working hours * Diesel and 230-volt drive * 10-meter working height * Self-leveling * 300 kg lifting capacity * 2895 kg net weight * Documents included

Condition: new, empty load weight: 12,040 kg, maximum load weight: 71,000 kg, axle configuration: > 3 axles, first registration: 06/2025, suspension: air, load capacity: 58,960 kg, • 24V hydraulic power pack • Width extensions • Loading platform 8.90 m • Gooseneck 3.45 m, straight section • Width from 2.53 to 3.00 m • Deck height 0.90 m • Beveled rear section • Hydraulic ramps 3 m x 0.90 m • 14 lashing rings • Coupling height 1350 mm • Smartboard • LED lights • 1st axle liftable • 3rd and 4th axle self-steering • Drum brakes Kode Abaabjpfx Ahaonc • Convoy kit • Length 12.65 m

Condition: used, empty load weight: 5,720 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 07/2019, suspension: air, tire condition: 30 %, load capacity: 36,280 kg, • Multi-position 20’, 30’, 40’, 45’ • Extendable front and rear Kodpfxj Aa U Ttj Ahaonc • Pneumatic unlocking • Pneumatic rear sliding extension • Storage box • Disc brakes • First axle liftable • Third axle self-steering

Condition: used, empty load weight: 10,680 kg, maximum load weight: 53,000 kg, axle configuration: 3 axles, first registration: 04/2020, total length: 20,500 mm, total height: 1,400 mm, suspension: air, load capacity: 42,320 kg, • 1st axle liftable • 3rd axle self-steering • Deck width 2.40 m • Platform height 1.40 m Kodj Aa U Spopfx Ahaenc • Platform length 13.30 m • Extendable to 20.50 m • Storage box • Long mesh rack • Water tank • Convoy kit • 10 lashing rings • WABCO SmartBoard • 20 aluminium stanchions on request

Condition: used, empty load weight: 5,540 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2012, total length: 7,900 mm, total width: 2,450 mm, total height: 1,300 mm, suspension: air, tire condition: 60 %, load capacity: 33,460 kg, • Volume: 25 m3 • First axle is liftable • 2 hatches • PVC storage compartment • Manual CRAMARO tarpaulin • Towing hitch Knodpfx Aj Abadaohaoc • Self-leveling suspension • Interior dimensions: 7.90 x 2.45 x 1.30 m

Condition: new, empty load weight: 8,775 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, total length: 20,500 mm, suspension: air, load capacity: 33,225 kg, • Extendable to 20.50m • Locking mechanism every 1000mm • 12 twist locks • 1x20’, 2x20’, 30’, 40’ containers • BAWER toolbox with 3 compartments • Full LED lights • Coupler height 1170mm • Platform width 1.60m • Convoy kit • 16 steel posts, 1.60m • Wooden floor with steel omega profiles • Perforated UPN 160 edge • 1st axle liftable • 3rd axle self-steering • Smartboard • LED work lights • Spare wheel Ksdpfx As Abafkshasnc • PVC toolbox • Lashing rings

Condition: good (used), Year of construction: 2019, functionality: fully functional, total width: 1,200 mm, total length: 600 mm, total height: 2,050 mm, overall weight: 400 kg, Düperthal hazardous materials cabinet, model FWF 90 We offer a hazardous materials cabinet from the FWF 90 category, featuring self-closing doors and connections for exhaust systems. Knodpjzhrkhofx Ahasc The cabinet is in good working order.

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Kedozlbqrepfx Ahaenc Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS according to specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base fra...

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Year of commissioning: 2025 Condition: Demo machine — under 200 production hours, virtually factory new Type: CNC plasma PIPE profiling machine (6-axis) - no beams Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a 6-axis CNC pipe cutting machine capable of processing round pipes up to 914 mm in diameter and 12,000 mm in length, with wall thicknesses ranging from 3 to 50 mm. The machine was installed in 2025 in Belgium and has logged fewer than 200 production hours — making it virtually a new machine at a pre-owned price. The 6th CNC axis maintains a constant torch-to-material distance, ensuring flawless weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head allows torch adjustment of ±60° and 380° rotation for precise contour cutting on any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor transport system on rail — Two-point fume extraction (at cutting head and through chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — E-cabinet with CNC unit, PLC, IP54 enclosure, power buffer — Industrial PC with 22" touchscreen and mobile control panel — All safety devices (CE certified per 2006/42/CE and 2004/108/CE) — Full technical documentation, operator manuals, installation drawings Key specifications: — Clamping range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel range: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm Kedpfsy H I Trex Ahaonc — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation footprint: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Please note: COROBS machine control software licenses are not included and must be purchased separately from Voortman. Voortman can provide reinstallation, commissioning, operator training, and ongoing maintenance contracts at the buyer's facility. Why buy this machine? A new MO Compact 900 currently costs EUR 350,000+ and has a lead time of 6–12 months. This unit offers the same capability with immediate availability and significant savings. Full OEM support from Voortman is available for the buyer. Location: Belgium (available for inspection by appointment) Delivery: Ex-works. Dismantling and transport by agreement. For questions or further information, please send us a message or call us.

Year of construction: 2017, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, fits the CMP, SCC 61/101 electric combi-steamers from the production year 2011 to the latest model series (Index H + I); this hood is no longer suitable for the iCombi series. The hood has been inspected in our in-house workshop and is fully functional. The hood has a few dents, see photos, but this does not affect its function in any way. You will receive an invoice with VAT shown. Ksdpfx As Aa I E Ajhajnc Are you looking for a specific Rational appliance type? Ask us, we have access to a large range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Professional overhaul / inspection & expert cleaning Checked & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and carries away vapors and fumes. Elaborate measures for exhaust air installation are a thing of the past. An external connection is no longer required. Installation is simple and can even be done later. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17125022437 Year of manufacture: 2017 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), mileage: 3,750 km, power: 120 kW (163.15 HP), first registration: 07/2000, fuel type: diesel, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, gearing type: automatic, permissible axle load (axle 1): 4,200 kg, permissible axle load (axle 2): 6,300 kg, loading space length: 5,000 mm, loading space width: 2,400 mm, Equipment: differential lock, - Differential lock - Refrigerator - Leather interior - Leather upholstery - Air-suspended seats - Toilet - Toolbox MAN 10.163 4x4 expedition vehicle – only 3,750 original kilometers! A very special and fully equipped expedition vehicle / off-road motorhome with 3 seats. This MAN 10.163 4x4 is an exceptional vehicle for anyone seeking freedom, adventure, and independent travel. Thanks to the robust MAN all-wheel-drive system, the large off-road tires, and the extensive off-grid equipment, this expedition vehicle is suitable for both long journeys and remote destinations where paved roads end. Vehicle * Make / Model: MAN 10.163 4x4 * First registration: 07.2000 * Mileage: only 3,750 km – original * Transmission: Allison automatic transmission * Drive: 4x4 * Differential lock Knodpfx Aho Aa Adasaec * Tires: 365/80 R20 – large off-road tires * Seats: 3 * Technically in good condition * Available immediately Extensively equipped for self-sufficient travel The living area is solidly built and equipped with high-quality materials and extensive equipment for comfortable and independent travel. Equipped with, among other things: * Large 600-liter water tank * 4 large solar panels * Inverter * Large refrigerator * Spacious shower * Gas stove * LED lighting in the living area with remote control * Truma water heater * ... and various other features Thanks to the combination of 4x4 drive, large off-road tires, and extensive off-grid equipment, this vehicle is the ideal base for adventure travel, expeditions, and longer stays in nature. Ready for adventure Whether you dream of a trip through Scandinavia, the Balkans, Morocco, or even further into remote regions: this MAN combines the robustness of a truck with the comfort of a motorhome. A vehicle like this, with only 3,750 original kilometers, is extremely difficult to find. Inspection The vehicle is technically in good condition and is available immediately. Inspection and test drives are possible by appointment. For further information, additional photos, a video, or specific questions, please do not hesitate to contact us at any time. --- About Cevoman - More than 45 years of experience with trucks and commercial vehicles - Technically inspected by our own workshop - Specialist in MAN trucks, loading cranes, and container systems - COP certified - Experience in worldwide export - Personal service and professional advice Cevoman BV Lenskensdijk 5 2200 Herentals Belgium

Condition: used, 3D systems Here, we offer a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Ksdpfozd Tt Aex Ahajnc Zaphyr™ coating system: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Large line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-in components. Intended use: The machine is used for pressing in fastening elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fastening elements: Press-in nut, rivet nut, self-piercing nut, press-in pin, punch pin / rivet pin Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connection plug HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Knsdpfjzgr I Rsx Ahaec Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fastening elements are pressed in automatically. Movements are only initiated when the operator presses the foot pedal, thus triggering the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. Kodpfx Aszii Dnehajnc This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, HANS Type: GSX 500-3.98 HANS column-slewing crane / column-swivel crane Load capacity: 500 kg / reach: 3,050 mm For sale: a HANS column-slewing crane with a LIFTKET electric chain hoist for industrial, workshop, production, assembly, and maintenance applications. The crane is suitable for operational lifting tasks and can be used to lift, position, and move workpieces, components, and machine parts. Technical data according to the nameplate Manufacturer: HANS-Hebetechnik + Metallbau GmbH Type / Designation: GSX 500-3.98 Year of manufacture: 2011 Design: Column-slewing crane Load capacity: 500 kg Reach: 3,050 mm Self-weight according to the crane nameplate: 360 kg Electric chain hoist LIFTKET Manufacturer: HOFFMANN Fördertechnik GmbH / LIFTKET Type: 021/51 Year of manufacture: 2011 Load capacity: 250 / 500 kg Lifting speed: 8.0 / 2.0 or 4.0 / 1.0 m/min Chain dimensions: 4 × 12 mm Power connection: 380–415 V / 3 phases / 50 Hz Control type: Direct control Protection class: IP55 Equipment / Features HANS floor-mounted column with slewing arm LIFTKET electric chain hoist Electric trolley Load hook Hand control / control pendant Chain catch container Crane main switch on the column Floor mounting via base plate Industrial design Knsde Aaxbzopfx Ahasc Condition & Notes Condition: used Visual condition: see pictures Signs of wear and tear due to use Functional testing not documented Scope of supply HANS column-slewing crane GSX 500-3.98 LIFTKET electric chain hoist Hand control Scope of supply as per sales agreement and pictures Dimensions & Weight Reach: 3,050 mm Load capacity: 500 kg Self-weight according to the crane nameplate: 360 kg Overall height and transport dimensions: not determined Total weight including accessories: not determined The actual transport dimensions and total weight depend on the scope of supply and the dismantling condition. Shipping or freight transport is possible by arrangement. Dismantling and loading must be coordinated in advance. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, New, never used In original packaging Quantity: 200 pieces; price per piece. Country of origin: Switzerland Consists of: 1. Propeller hub with 3 pre-assembled, adjustable aluminum blades 2. Precision adjustment wheel made of plastic 3. High-strength stainless steel locking nut for variable-pitch propellers 4. Locking plate 5. Floating wrench for stepless pitch adjustment 6. Wrench for flight mode switches 7. User manual The REVOMASTER S 110 propeller is characterized by high efficiency and low weight, ensuring better performance and fuel economy. Thanks to the use of carbon composite, it is corrosion-resistant and has a long service life. It is also available in various mounting configurations, allowing it to be adapted to different types of engines. Ksdpfx Aev Dhc Nohaenc

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Kjdpoz A Hh Uofx Ahaonc

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Ksdpez Iyvpofx Ahaenc