Used Sheet Load for sale (39,850)

Condition: used, GENERAL INFORMATION Comments: Internal width: 5,940 mm • Internal depth: 2,000 mm • Internal height: 2,000 mm • Exterior walls and roof: trapezoidal galvanized sheet metal • Interior walls: trapezoidal galvanized sheet metal • Interior ceiling: trapezoidal galvanized sheet metal • Floor: wooden floor made of tongue-and-groove planed boards • Roof drainage: via longitudinal gutters • Door type: double-leaf door Chodpfx Ahsxqdpuo Uod Total width: 2,170 mm Total height: 2,150 mm Total length: 6,080 mm Location: Bremen Condition: used

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Csdjd Hb Ilopfx Ah Ushd -Sheet metal claws -Span width: 0 to 40 mm -Load capacity: 4,500 kg -Weight: 16 kg

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Chsdpfowvv Rqjx Ah Usd Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, Year of construction: 1998, Please contact ATS Norway for more information Please provide reference number upon request: 21012 Specifications: Chjdpfxswz D A Ss Ah Usd Approx. 1998 model Hours: approx. 20,600 4 new tires Does not reverse Cracked windshield Engine starts and runs Climate control Description:Valmet 840 forwarder sold as a repair project.It does not reverse and moves very slowly forward. Engine starts and runs.4 new tires included.Ready for delivery. Own weight: 14000 Model: 840

Condition: used, Year of construction: 1980, total length: 3,100 mm, total width: 1,850 mm, total height: 1,450 mm, Weight: 2.800 kg Chjdsxpu Acspfx Ah Ujd - Year: 1980 - Documentation available: No - Model: Hydraulic - Max. working width: 2500mm - Throat depth: 2mm - Back gauge: 1 - Max. sheet thickness: 4mm - Back gauge: 690mm - Control: Conventional - Motor power: 5.0kW - Transport dimensions: 3100mm x 1850mm x 1450mm (l x w x h) - Transport weight [kg]: 2800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. Chedpsiit Erefx Ah Ued The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: used, tank capacity: 885 l, Location: Bremen Chjdpjxqamvjfx Ah Uod Condition: used Capacity: 885 liters Vacuum: 1.0 bar Max. Overpressure: 3.0 bar Tank Max. Operating Temperature Tank / °C: 130 °C Design: suspended Heating/Cooling: available Double Jacket Volume: 35.0 liters Max. permissible operating overpressure: 6.0 bar Heating/Cooling Jacket Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Max. permissible operating temperature: 140 °C Cylinder temperature control: half-pipe coil Heating/Cooling Jacket Bottom temperature control: half-pipe coil Insulation: present Insulation Insulation material: mineral wool Internal diameter: 1,000 mm Cylindrical height: 864 mm Technical Data / Dimensions Wall thickness ends: 4.5 mm Wall thickness cylinder: 6 mm Technical Documentation: Drawing, various documents Equipment Manhole / dome: on top (DN 500) Nameplate: Equipment: crane lugs Equipment Outlet (alternative entry): 55 mm Remarks: The tank was previously suspended by the former owner in a ring with load cells, which was embedded in the floor (one ring per tank is included in the scope of delivery; see photos); outer diameter in the ring approx. 1,540 mm; insulation jacket made from material 1 Last application: pharmaceuticals Product-contact material: V4A 1.4435 (AISI316) Material Specifications Temperature control system material: V2A 1.4541 (AISI304) Agitator Agitator manufacturer: MAVAG AG Power: 0.55 kW Speed: 416 rpm Agitator: magnetic agitator Agitator Voltage: 230/400 volts Agitator arrangement: bottom-mounted Agitator features: Agitator data taken from one of the two tanks, the second tank has no motor nameplate (we assume the agitator data is identical); various technical documents for the magnetic agitators

Year of construction: 2016, condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece Chodpfjd Aqtrsx Ah Uod -Weight: 15.4 kg/piece

Condition: used, mileage: 500,769 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 315/60 R22.5, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2023, Equipment: ABS, cruise control, parking heater, spoiler, = Additional options and accessories = - Roof spoiler - Electric exterior mirrors - Electric windows Chedpfxextz Tco Ah Uod - Spare key - Speed limiter - Aluminium fuel tank - Low deck - Side skirts - Stability control - Standard air conditioning - Alternating current - Central locking = Further information = Brakes: Disc brakes Front axle: Tire size: 315/60 R22.5; Steered; Tire tread left: 6 mm; Tire tread right: 7 mm; Suspension: Leaf suspension Rear axle: Tire size: 295/60 R22.5; Twin tires; Tire tread left inside: 8 mm; Tire tread left outside: 7 mm; Tire tread right inside: 8 mm; Tire tread right outside: 8 mm Unladen weight: 7,885 kg Payload: 10,115 kg Gross vehicle weight (GVW): 18,000 kg Damages: none

Year of construction: 2024, operating hours: 150 h, condition: ready for operation (used), This Crippa BASIC 42.1 was manufactured in 2024. It is a robust tube bending machine capable of handling steel tubes up to 40x1.5 mm and aluminum, copper, or other tubes up to 42x2.5 mm. It features a maximum bending radius of 170 mm and can accommodate tube lengths up to 4650 mm. Consider the opportunity to buy this Crippa BASIC 42.1 tube bending machine. Contact us for more information about this machine. Codpfxoxtq U Ne Ah Ushd Application Types Other Sheet Metal Machinery

Condition: used, Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: Darley Type: GS3020 Control: Conventional Codpfewnh Hbjx Ah Ushd Cutting width: 3100mm Cutting thickness: 20mm Electric Backgauge: 1000mm Motor-power: 30kW Incl. multiple frontloader-arm Total dimensions: 3600x2440x1950mm Machine-weight: 13500kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), mileage: 543,000 km, power: 427 kW (580.56 HP), first registration: 09/2002, fuel type: diesel, color: yellow, axle configuration: 6x4, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2002, Equipment: air conditioning, crane, = Additional options and equipment = - Aluminum fuel tank - Leaf suspension - Electric windows - Refrigerator - Fog lights - Radio/CD player - Rotating beacon - Sun visor - Toolbox = Notes = 6x4 tractor unit V8 engine Leaf suspension Detachable flatbed Palfinger PK 56002 + Fly jib PJ 115 6x hydraulically extendable Fly jib hydraulically extendable 5x Total working height approx. 35 m Radio remote control Hydraulic cable winch 4-point outrigger stabilisation In very good condition! Ready for immediate use = Further information = Technical information Number of cylinders: 8 Transmission Gearbox: 12 speeds, manual transmission Axle configuration Suspension: leaf spring suspension Front axle: steered Rear axle 1: reduction: external planetary axles Chjdpfxext Ebkj Ah Usd Rear axle 2: reduction: external planetary axles Weights Unladen weight: 21,155 kg Payload: 4,845 kg Gross vehicle weight: 26,000 kg Functionality Crane: Palfinger PK 56002 + Fly jib PJ 115, year of manufacture 2002, mounted behind the cab Condition Technical condition: very good Visual condition: very good Further information Please contact G. Damen or W. Schischke for more information.

Condition: used, Year of construction: 2021, operating hours: 177 h, Please contact ATS Norway for more information Please provide reference number upon request: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive? - Good tires - Automatic box - With front screen - Lots of extra light - Radio/Cd - Climate/ac - Diesel - With belts Worl Power Er-180 000L-8 crane 180 t/m from 2016   Superstructure: - Supportlegs - Extra light Csdpjvg At Iefx Ah Ujhd - Quick attach - Reversing camera - Central grease Hours: 177

Condition: excellent (used), Year of construction: 2000, max. size 34 x 46 cm age 2000 DDS film dampenings single sheet feeder laser cut ink knife central size adjustment Chodpfoiu E Uaox Ah Usd dry sprayer max. 10.000 sheets / h (off-load) shown totalizer: approx. 23 mill. impressions Delivery time: immediately

Condition: used, mileage: 70,393 km, power: 353 kW (479.95 HP), first registration: 01/2023, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 315/60 R22.5, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: ABS, cruise control, parking heater, spoiler, = Additional options and accessories = - CD player - Roof spoiler - Dual fuel tank - Electrically adjustable exterior mirrors - Electric windows - Spare key - Aluminum fuel tank - Refrigerator - Low deck - Headlights Csdpsxtzzajfx Ah Uehd - Sun visor - Alternating current - Toolbox - Central locking = Further information = Brakes: Disc brakes Front axle: Tire size: 315/60 R22.5; Steering axle; Left tire tread: 10 mm; Right tire tread: 10 mm; Suspension: Leaf suspension Rear axle: Tire size: 295/60 R22.5; Twin tires; Left inner tire tread: 10 mm; Left outer tire tread: 10 mm; Right inner tire tread: 10 mm; Right outer tire tread: 10 mm; Suspension: Air suspension Damages: None

Condition: used, Year of construction: 1990, Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: Safan Type: HVS 310-13-16 Cutting width: 3100mm Max. thickness: 16mm Electric backgauge Machine-dimensions: 4300x2700x2000mm Machine-weight: 11500kg - Year: 1990 - Documentation available: No Chjdpfx Ajwnhlkeh Uod Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1998, max. size 52 x 74 cm perfecting: 2/0 - 1/1 age 1998 CP-Tronic Alcolor film dampenings cooling unit Technotrans Autoplate automatic washing devices dry sprayer Grafix Alphatronic Cjdpfxow I E N So Ah Ujhd shown totalizer: approx. 39 mill. impressions

Condition: used, mileage: 765,000 km, first registration: 01/2018, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 385/55 R22.5, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2018, Equipment: ABS, cruise control, parking heater, soot filter, = Additional options and equipment = Chedpjxty Dysfx Ah Uod - Dual fuel tank - Electric exterior mirrors - Electric windows - Spare key - Speed limiter - Aluminum fuel tank - Refrigerator - Engine brake - Low deck - Particulate filter - Stability control - Standard air conditioning - Alternating current (AC) - Toolbox - Central locking = Further information = Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55 R22.5; Steering; Left tire tread: 15%; Right tire tread: 15% Rear axle: Tire size: 315/60 R22.5; Twin tires; Left inner tire tread: 15%; Left outer tire tread: 15%; Right inner tire tread: 15%; Right outer tire tread: 15% Damage: Damaged vehicle (not roadworthy)

Condition: used, Year of construction: 1997, Price: On request Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm Chedpfx Aowng R Soh Ujd + stacking-station Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1970, max. size 40 x 57 cm age 1970 Chodpfeq I Rf Iox Ah Ujd single sheet feeder conventional dampening Delivery time: immediatelly from stock

Condition: used, Year of construction: 1998, Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: GWF Mengele Type: S8-4000 Year: 2005 Control: Siemens Simatic Cutting width: 4050mm Cutting thickness: 8mm Electric Backgauge: 1000mm Throat: 180mm Motor-power: 22kW Incl. multiple frontloader-arms: 2500mm Csdpfx Aownhlqeh Ujhd Total dimensions: 4700x2550x2300mm Machine-weight: 13000kg Video available - Year: 1998 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: Colmal Type: HS 40-13 Year: 2008 Controller: Delem DAC-350 Cutting width: 4050 mm Max. thickness: 13mm Incl. documentation and peripherals Incl. outfeed-conveyor Machine dimensions: 4800x2400x2650mm Machine weight: 15000kg - Year: 2008 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Codpfxjwng Rxo Ah Ushd Lukas van Rossum

Condition: used, total length: 5,500 mm, total width: 2,400 mm, total height: 2,100 mm, Weight: 12.000 kg - Documentation available: No - Model: Hydraulic - Max. working width: 5150mm - Back gauge: 1 - Max. sheet thickness: 6mm - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 12000kg Cjdewng Nhjpfx Ah Ujhd - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 6,400 mm, Weight: 17.500 kg Price: On request - Documentation available: Yes - Serial number: 13707 - Model: Hydraulic - Max. working width: 6200mm - Throat depth: 60mm Chsdpfx Aewnhp Nsh Uod - Back gauge: 1 - Max. sheet thickness: 6mm - Back gauge: 1000mm - Control type: ELGO - Control: Conventional - Motor power: 11.0kW - Transport weight [kg]: 17500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,700 mm, total width: 1,750 mm, total height: 2,000 mm, Empty weight: 2.000 kg Working width: 600mm 2 Stations: 1x Brush + 1x Grinding-band - Documentation available: No - Motor power: 1.1kW - Transport dimensions: 1700mm x 1750mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Chedpfx Asxpgwxeh Uod Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren