Used Silencer for sale (145)

Condition: used, mileage: 671,300 km, power: 375 kW (509.86 HP), first registration: 04/2017, fuel type: diesel, empty load weight: 8,042 kg, overall weight: 18,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 2 axles, wheelbase: 3,800 mm, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, additional headlights, air conditioning, compressor, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, traction control, Urea tank (AdBlue) Displacement 12,902 ccm Hydraulics (power take-off) Lane assistant Distance warning system EBS ESP Light alloy rims Auxiliary air conditioning Payload 9,958 kg Leaf-air suspension Automatic air conditioning Compressor RTI PULS SILENCER 550 Type CMAX 3 Ijdpor Uhqmefx Ahyjtb Sun visor Light bar All-round lights Air horns 2 sunbeds cool box Euro 6 C Errors excepted

Condition: used, mileage: 98,263 km, power: 63 kW (85.66 HP), first registration: 12/1982, overall weight: 5,000 kg, fuel type: diesel, color: blue, gearing type: mechanical, loading space width: 2,000 mm, loading space length: 4,050 mm, loading space height: 1,900 mm, Year of construction: 1982, total length: 6,075 mm, total width: 2,120 mm, total height: 2,730 mm, number of seats: 2, Very clean 'Düdo' as a 508 D flatbed with tarpaulin, 100% original – freshly restored and newly painted in RAL 5329. From second ownership: 1st owner was an authority / state police, then privately owned and returned to us due to health reasons. Equipment: 2-seater, radio, fog lights, ring-type trailer hitch 3.5t The 3.8l diesel engine runs perfectly, Vmax = 96 km/h, also plenty of torque on inclines. No pending repairs – ready to drive immediately, fully equipped with side-impact and underrun protection. All 6 tires are new, the exhaust system, silencer, and tailpipe are new. We have then thoroughly and professionally refurbished the vehicle: Driver's cab disassembled, partially welded, and professionally repainted in RAL 5329. The 508 was originally green (RAL 6029). We have also brush-cleaned the chassis and all rims, repainted in several coats, followed by preservation with protective wax. Recent inspection performed at our workshop: - Engine oil and brake fluid changed, all lubrication points serviced - Engine sealed: crankshaft oil seal replaced, radiator removed and reinstalled, coolant renewed Isdpfxoxp Tkle Ahystb - Wheel brake cylinders front and rear renewed, both starter batteries replaced Some of the tension straps on the tarpaulin have been renewed. The entire process took around 120 hours. New general inspection (HU/AU) with Classic Car Certificate (H registration) upon delivery. Included: 2 spare wheels (for rims) and a tow bar. Flatbed dimensions: 4050 x 2000 x 1900 mm (L x W x H) +++ Subject to change, prior sale, and errors +++ + BP 581 H+

Condition: used, Year of construction: 2010, Used Revised Air Compressor CMC CWA11-800 40 bar General Features of the Used Air Compressor CMC CWA11-800 40 bar The Used Air Compressor CMC CWA11-800 40 bar delivers high performance as an oil-free, three-stage unit, ideal for industrial environments that require high-quality compressed air. CMC manufactured this model in 2010 for air compression systems operating at up to 40 bar of working pressure. Since the unit uses dry-running cylinders, it eliminates the need for internal lubrication. Therefore, operators can use it in critical applications where they must avoid any air contamination. Moreover, its robust design ensures long-term durability and operational consistency. Technical Operating Specifications The Used Air Compressor CMC CWA11-800 40 bar operates with three cylinders across two compression stages. It draws air at atmospheric pressure and functions in ambient temperatures ranging from +1 to +35 °C. Consequently, the unit suits various environmental conditions. The system delivers an intake flow rate of 800 cubic meters per hour and reaches a maximum pressure of 42 bar. In addition, a 132 kW (180 HP) three-phase electric motor powers the compressor at 710 revolutions per minute, running on 400 Volts and 50 Hz. As a result, the compressor provides high efficiency and reliability, even under demanding workloads. Cooling System and Thermal Management To maintain optimal temperatures, the Used Air Compressor CMC uses a water-based cooling system for both the cylinders and compressed air. Specifically, copper tube and brass plate heat exchangers dissipate heat in both the intermediate and final compression phases. Furthermore, a gear-driven oil pump circulates lubricant through a dedicated heat exchanger, which enhances cooling performance. Additionally, a preheating resistor stabilizes thermal conditions during start-up. Therefore, the system reduces thermal stress and extends component life. Overall, this combination of cooling solutions ensures optimal efficiency throughout the filtration cycle. Mechanical Equipment and Functional Components CMC designed the Used Air Compressor CMC  with a base frame supported by four anti-vibration feet. As a result, operators can install the unit directly on the floor without additional foundation work. The W-type compressor block features dry cylinders and pistons with PTFE-loaded sealing rings. In contrast to lubricated systems, this configuration prevents oil contamination. Furthermore, stainless steel suction and delivery valves include automatic unloader mechanisms that support load/unload functionality. In terms of transmission, the motor and compressor connect via trapezoidal belts, which simplify maintenance. The intake side also includes a silenced filter, while a protective cage improves operator safety. Safety Devices, Monitoring, and Physical Layout Ijdpfxjwcf Ews Ahyotb The Used Air Compressor CMC integrates comprehensive safety and monitoring systems.

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts Isdpfjvgurcex Ahystb 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: ready for operation (used), Technical characteristics ATEX Vacuum unit Dimensions: 3000 x 3000 x 6000 mm 96 filter bags, length 2800 mm, diameter 250 mm Electrical unclogging ATEX fan 45kW, diameter inlet/outlet 600 mm Pressure suction Filter surface 188 m2 Max flow 30000 m3/h 2 anti-explosion vents (650 x 650 mm) Fire dampers, callus traps, silencers Sluice 300 x 150 mm, with 0,37 kW motor for recovery Electrical cabinet Power and Motors Voltage: 400 V Pluging: Three-phased Power: 50 Kw Motor: 60 CV Overall dimensions Lenght: 3000 mm Width: 3000 mm Height: 6000 mm Itjdpot U Ufzsfx Ahyjb

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Iodpfx Aodzqblehyetb Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Iodpfemquwqex Ahystb Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Itjdel R Hz Sepfx Ahyjb Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Itodpfx Ahsl R Hy Aeysb Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, working width: 1,300 mm, overall weight: 4,000 kg, working height: 1,000 mm, height adjustment type: electric, transport height: 1,000 mm, Calibrating / Wide Belt Sander Manufacturer: Costa Model: 71 CCT 1350 Working width: 1300 mm Equipped with: 1x calibration roller (hard rubber approx. 80 Shore), 22 kW, sanding belt dimensions 1380 x 2620 mm 1x calibration roller – newly rubberized (hard rubber 60 Shore), 18.5 kW, sanding belt dimensions 1380 x 2620 mm 1x sanding pad, 15 kW 1x dust removal brush 1x blow-off unit Feed speed adjustable, 4 – 24 m/min. Conveyor belt with vacuum Vacuum blower with silencer Working height: 1000 mm Itedpfxoxl N Ths Ahysb Height adjustment of the upper machine part (easy integration into existing production lines) Connection: 380 V 50 Hz, 200 A Total connected load approx. 65 kW Dimensions approx. 3000 x 2500 x 2400 mm (LxWxH) Weight approx. 4000 kg

Condition: new, ELMAG SEBSS 12000WDE-AVR-DSE3110 power generator with HONDA GX630 engine, electric start and AVR control (super-silenced) SUPERSILTENT - petrol - super-silenced - 400/230 volt The super-silenced SEBSS models are technically perfect and elegant. At just 62 dB(A), they are among the quietest petrol-powered generators. They supply alpine huts, building sites, stages and tents, sales stands and weekend homes, are used as mobile emergency helpers by the fire department and protect important private, commercial, agricultural and municipal facilities as emergency power generators. SEBSS generators are equipped with 230V Schuko sockets or CEE connections. WDE models also have a 400V CEE connection. Equipment - Connections: 1x 230 V Schuko 16A, 1x 230 V CEE 16A-3p and 1x 400 V CEE 16 A-5p - Starter: electric choke, electric start, battery - Shutdown: low oil, overtemperature, overload and short circuit - Synchronous generator - AVR control - Protection class IP23 - DSE 3110 - Voltmeter - Hour meter - Remote start connection - Interchangeable tank - Diaphragm pump - Sound insulation, SS Popular optional equipment (option) - Trickle charger - A-LTS Automatic load transfer switch - 4-wheel set ADVANTAGES Quality drive - original Honda four-stroke air-cooled petrol engine Synchronous generator with electrical voltage regulation - AVR, ideal for sensitive consumers Thermal-magnetic circuit breaker with shutdown in the event of overload and short circuit Automatic switch-off in the event of overtemperature and low oil level NEW: Now with DSE 3110 control module for automatic engine & generator monitoring and remote start/stop via potential-free contact TECHNICAL DATA Voltage - frequency 400 / 230/50 V/Hz Maximum power 3~400V 12 kVA Continuous power 3~400V 10 kVA Power 3~400V cont. 14.4 A Maximum power 1~230V 4 kVA Continuous power 1~230V 3.7 kVA Power 1~230V cont. 16 A Fuel type Petrol Speed 3000 rpm Cooling air-cooled Engine type Honda GX 630 Exhaust stage 5 Engine power 14 kW Displacement 688 cm³ Cylinder 2 Tank capacity 20 l Consumption at 75% load 4.2 l/h Running time per tank filling at 75% load 4.8 h Dimensions LxWxH 1270x750x590 mm Weight (without fuel) 204 kg Itjdpfx Aot H Ibtshyeb Sound power according to RL 2000/14/EG, 2005/88/EG 91 LWA Sound pressure level at 7m 66 dB(A)

Condition: new, SDMO DIESEL 6000 A SILENCE AVR C5 PRODUCT BENEFITS - Generator with 3 years warranty - KOHLER professional engine, air cooled - AVR: automatic voltage regulation - Connection interface with hour meter - Collection tray for hydrocarbons GENERAL TECHNICAL DATA: DIESEL SILENCE series Frequency (Hz) 50 Hz Max. Power (kW) * 4.90 Rated voltage (V) 230 Number of phases Single phase Fuel Diesel Tank (L) 27 Combustion 75% (L/h) * 1.20 Autonomy 75% (h) * 22.50 Guaranteed sound power level LwA dB(A) 92 Sound pressure level at 1m distance in dB(A) 76 Sound pressure level at 7m distance in dB(A) 63 TECHNICAL DATA MOTOR: Motor brand KOHLER Engine type KD15-440E_C5 Distribution Diesel O.H.V. Electric start Oil protection Oui Displacement (cm3) 442 Capacity oil (l) 1.50 TECHNICAL DATA GENERATOR: Technology rings and brushes Regulation AVR Yes Protection class IP 23 Insulation class H DESCRIPTION CONNECTIONS AND SWITCHBOX: 1 connection 230V 10/16A - overload protection + 1 connection 230V 16A -. overload protection + 1 connection 230V 32A - overload protection + hour meter + display +APM202 Itodpfjkvn D Dex Ahyjb DIMENSIONS AND WEIGHT: Length (cm) 99 Width (cm) 61.50 Height (cm) 96 Net weight (kg) 215.50 SDMO dealers: Other models available on request.

Condition: new, Aircraft AIRPROFI 1003/500/10 H Silent piston compressor For professional and industrial applications where a quiet working environment is required. DESCRIPTION Extremely quiet thanks to sound-insulated housing and additional silencer on the intake filter Suitable for installation even in noise-sensitive areas and the immediate working environment Two-cylinder high-performance unit made of gray cast iron with low speed guarantees particularly quiet and low-vibration operation: less wear and longer service life Large fan wheel on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior Intercooler and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation High-quality Condor pressure switch Equipped with glycerine pressure gauge, operating hours counter and fault display via LED lights Quality electric motor with motor protection switch and start-up relief Integrated phase monitoring Device for easy tensioning of the V-belt Service-friendly design Ready for connection with all fittings and safety devices Models with compressed air tank: Galvanized compressed air tank inside and out with 15-year guarantee against rusting through General information Air outlet¾" Dimensions and weights Length (product) approx.2020mm Width/depth (product) approx.980mm Height (product) approx. 1840mm Weight (net) approx. 410kg Electrical data Supply voltage400V Mains frequency50Hz Output power7.5kW Input power8.71kW Noise emission Sound pressure level Lp64dB(A) Explanation Sound pressure levelSound pressure level at 1 m distance according to DIN 45635 T 13 Iodpfst H N Nlsx Ahyetb Compressor Compressor systemHOS Suction capacity approx.1080l/min Filling capacity approx.770l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders2 Number of compression stages2 Compressor speed1100min¯¹ Compressed air tank Maximum pressure10bar Tank capacity500l EQUIPMENT Drive transmissionV-belt Compressed air line materialFlexible armored hose line with heat protection Compressed air outletBall valve Compressed air tankHot-dip galvanized inside and outside with fifteen-year guarantee against rust AD 2000 compliantyes Tank baseSwinging elements Star-delta switch ✔

Condition: new, DIESEL 6500 TA SILENCE AVR C5 Generator PRODUCT BENEFITS - Power generator with 3 years warranty - KOHLER professional engine, air cooled - AVR: automatic voltage regulation - Connection interface with hour meter - Collection tank for hydrocarbons GENERAL TECHNICAL DATA DIESEL SILENCE series Frequency (Hz) 50 Hz Max. Power (kW) * 5.20 Max. Power LTP (kVA) 6.50 Rated voltage (V) 400 Number of phases Three-phase Fuel Diesel Tank (L) 27 Combustion 75% (L/h) * 1.20 Autonomy 75% (h) * 22.50 Guaranteed sound power level LwA dB(A) 92 Sound pressure level at 1m distance in dB(A) 76 Sound pressure level at 7m distance in dB(A) 63 TECHNICAL DATA MOTOR Motor brand KOHLER Engine type KD15-440E_C5 Distribution Diesel O.H.V. Electric start Oil protection Oui Displacement (cm3) 442 Capacity oil (l) 1.50 TECHNICAL DATA GENERATOR Technology rings and brushes Regulation AVR Yes Protection class IP 23 Insulation class H DESCRIPTION CONNECTIONS AND SWITCHBOX 1 connection 230V 10/16A - overload protection + 1 connection 230V 16A - overload protection + 1 connection 400V 16A - overload protection overload protection + 1 connection 400V 16A - overload protection + hour meter + display + APM202 DIMENSIONS AND WEIGHT Length (cm) 99 Iodpjkvn U Hsfx Ahyjtb Width (cm) 61.50 Height (cm) 96 Net weight (kg) 215.50 SDMO dealers: Other models available on request.

Condition: new, GEKO 7401 ED-AA/HHBA PS Power Generator Note: Current delivery time approx. 6-9 months from receipt of order - subject to change without notice. Equipment: Silent design with large air filter and large silencer, partially encapsulated with insulated sheet steel, particularly quiet. Control box operation opposite exhaust. Protected battery installation in switch box. Automatic low oil shut-off. Fuel gauge. 3x Schuko socket IP67, 1x CEE 1~ 16A IP67, 1x CEE 3~ 16A IP67 1x KFZ 12V DC connection (only E-Start) With switchable start amplification. Generator Asynchronous el. Power: 3~ cos φ 1,0 6480 VA el. Power: 1~ cos φ 1,0 5150 VA Voltage 3~ 400 V voltage 1~ 230 V current 3~ 10,4 A max. total current 1~ 24 A Current 1~ (CEE) 16 A current 1~ (Schuko) 16 A max. starting current cos φ 0,6 11,9 A 3~ frequency 50 Hz Protection class generator IP 54 Engine type Honda GX390 RT2 Number of cylinders 1 speed 3000 rpm Fuel type gasoline Engine oil capacity 1,1 l Engine power 6,4 kW Cooling engine/generator air/air Isdpegibwuofx Ahystb Tank capacity 19 l Operating time: full load / half load 6 / 8,25 h Weight 119 / 126 kg with battery Dimensions L x W x H 736 x 580 x 530 mm Sound power level LWA 96 dB(A) Sound pressure level (10m) 68 dB(A) GEKO dealer - please send us your inquiry

Condition: new, DIESEL 10 LC A SILENCE AVR C5 Power Generator PRODUCT BENEFITS - Power generator with 3 years warranty - Professional KOHLER engine, water cooled - Very quiet - Sound and shock absorbing panels - Collection tank for hydrocarbons GENERAL TECHNICAL DATA Itjdpfxjkvn Tdo Ahyjb DIESEL SILENCE series Frequency (Hz) 50 Hz Max. Power (kW) * 8.30 Rated voltage (V) 230 Number of phases Single phase Fuel Diesel Tank (L) 27 Combustion 75% (L/h) * 2.60 Autonomy 75% (h) * 10.40 Guaranteed sound power level LwA dB(A) 94 Sound pressure level at 1m distance in dB(A) 78 Sound pressure level at 7m distance in dB(A) 65 TECHNICAL DATA MOTOR Motor brand KOHLER Engine type KDW702-H_C5 Distribution Diesel O.H.V. Electric start Oil protection OUI Displacement (cm3) 686 Oil capacity (l) 1.60 TECHNICAL DATA GENERATOR Technology rings and brushes Regulation AVR Yes Protection class IP 23 Insulation class H DESCRIPTION CONNECTIONS AND SWITCHBOX 2 sockets 230V 10/16A - overload protection + 1 connection 230V 16A - overload protection + 1 connection 230V 32A - overload protection overload protection + 1 connection 230V 32A - overload protection + emergency stop- switch + hour meter + display +APM202 DIMENSIONS AND WEIGHT Length (cm) 121.10 Width (cm) 79 Height (cm) 105.60 Net weight (kg) 310 SDMO dealers: Other models available on request.

Condition: new, DIESEL 15 LC TA SILENCE AVR C5 Power Generator Itedpfx Aekvpakshyjb PRODUCT BENEFITS - Power generator with 3 years warranty - Professional KOHLER engine, water cooled - Very quiet - Sound and shock absorbing panels - Collection tank for hydrocarbons GENERAL TECHNICAL DATA DIESEL SILENCE series Frequency (Hz) 50 Hz Max. Power (kW) * 9.50 Max. Power LTP (kVA) 11.90 Rated voltage (V) 400 Number of phases Three-phase Fuel Diesel Tank (L) 27 Combustion 75% (L/h) * 2.60 Autonomy 75% (h) * 10.40 Guaranteed sound power level LwA dB(A) 94 Sound pressure level at 1m distance in dB(A) 78 Sound pressure level at 7m distance in dB(A) 65 TECHNICAL DATA MOTOR Motor brand KOHLER Engine type KDW702 Distribution Diesel O.H.V. Electric start Oil protection OUI Displacement (cm3) 686 Capacity oil (l) 1.60 TECHNICAL DATA GENERATOR Technology rings and brushes Regulation AVR Yes Protection class IP 23 Insulation class H DESCRIPTION CONNECTIONS AND SWITCHBOX 1 connection 230V 10/16A - overload protection + 3 sockets 230V 16A - overload protection + 1 connection 400V 16A - overload protection + emergency stop- switch + hour meter + display + APM202 DIMENSIONS AND WEIGHT Length (cm) 121.10 Width (cm) 79 Height (cm) 105.60 Net weight (kg) 315 SDMO dealers: Other models available on request.

Condition: new, Aircraft MOBILBOY SILENCE 401/50 OF E piston compressor Oil-free, very smooth-running compressor for mobile use DESCRIPTION Very smooth-running operation and therefore very quiet Oil-free piston compressor: no oil change necessary and no oil in the condensate for the best working quality Compressed air reducer for infinitely variable adjustment of the desired working pressure High-quality pressure switch Electric motor equipped with motor protection switch Fully automatic on/off operation One pressure gauge each for displaying the tank and working pressure Powder-coated compressed air tank TECHNICAL DATA General information Air outlet¼" Dimensions and weights Length (product) approx. 800mm Width/depth (product) approx. 360mm Height (product) approx. 720mm Weight (net) approx. 40kg Electrical data Supply voltage 230V Mains frequency 50Hz Output power 2.2kW Input power 2.3kW Duty cycle drive motor 70% Noise emission Sound pressure level Lp67dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Iodpfot H N I Ujx Ahyotb Compressor Compressor system WDS Oil-free / oil-lubricated Oil-free Suction capacity approx. 400l/min Filling capacity approx. 180l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders2 Number of compression stages 1 Compressor speed 2850min¯¹ Piston stroke 18mm Piston diameter 69.7mm Compressed air tank Maximum pressure 10bar Tank capacity 50l Tank upright / horizontal Horizontal Tank surface powder-coated EQUIPMENT Pressure regulation Filter pressure regulator Automatic pressure switch ✔ Drive transmission Directly coupled Compressed air line material Flexible armored hose line with heat protection Compressed air tapping Two one-hand quick couplings Compressed air tank Powder-coated Tank base Two wheels with solid rubber tires, two rubber buffers Connection cable 1.5 m CEE 7/4 connection plug

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: Iedpfx Ajwwt E Ujhyotb - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: new, functionality: fully functional, Key Features & Specifications of Nissan Muffler (550x170x150mm) ✔️ Product Overview: The Nissan Muffler is an essential component of the exhaust system, designed to reduce noise, improve engine efficiency, and manage emissions. It ensures optimal vehicle performance by directing and filtering exhaust gases. ✔️ Key Specifications: Type: Exhaust Muffler / Silencer Compatible Vehicle: Nissan (specific model compatibility may vary) Itodpfxev Ebh Io Ahyob Dimensions: 550mm (Length) × 170mm (Width) × 150mm (Height) Material: Stainless Steel / Aluminized Steel (depends on variant) Weight: Approx. 4-6 kg (varies by design) Inlet/Outlet Diameter: Standard sizes, typically between 40-70mm (check model-specific details) Function: Reduces exhaust noise, directs emissions, and enhances engine efficiency Durability: Rust-resistant and corrosion-resistant for extended lifespan Installation: Direct-fit or universal fit (depends on variant) ✔️ Key Features: ✅ Noise Reduction – Designed with internal chambers and baffles to minimize engine noise ✅ Enhanced Performance – Optimizes backpressure for improved engine efficiency ✅ Durability & Corrosion Resistance – High-quality metal construction for long-lasting performance ✅ Efficient Emission Control – Helps in reducing harmful emissions from the exhaust gases ✅ Easy Installation – Direct-fit design for Nissan models or universal fitting options

Condition: used, Offered: Universal exhaust silencer. Applicable for various brands. Total length 689 mm, diameter 256 mm, 2x pipe 102 mm. M100048 A P PARTS 3669 AG CHEM EQUIPMENT WR37235 AGCO WR37235 AMERICAN AUGERS 48BM5123 AP EXHAUST PRODUCTS INC 3669 APE INDUSTRI AB 3669 ARDCO ENE0004 ASTEC UNDERGROUND 306245207 BADGER 78103131 BARBER GREENE 29H77 CASE/CASE IH S505881 CENTURY II 27Q334 CHARDONNET 7410004800 CHRYSLER 2907822 CLARK 1513792 CRANE CARRIER 21042 CUB CADET 549472C1 DART MTM100048 DITCH WITCH 196332A DRESSER 101877 Itjdpfeuuqhxsx Ahyjb DROTT 505881 EAGLE TRUCK PRODUCTS E206 FMC 2236408 FORD D3HS5230GA GALION D101877 GEHL 41889 GINAF OG0000017213 GROVE 7642000009 HEAVY DUTY MFG 30015 INGERSOLL RAND 90600424 INSLEY 520340 INTERNATIONAL DCM100048 JLG 3220049 KOEHRING 125656 KOMATSU 101877 LOESING 22038 MANITOWOC 7642000009 MI-JACK 33170033 MINNPAR M6002355 NELSON 86168M NEOPART GH0201001 NEOPLAN EH0201001 P&H 27Q334 PACCAR 0561649 PETTIBONE 0RO23180090 RIKER 10024 SANDVIK 04710300 SICARD 00561649 STEMCO 1909887 SULLIVAN PALATEK 050187850027 TAMROCK 4710300 TEREX 125672 TOW ENGINE 680401 VERMEER 283389001 VOLVO G695424 WALGAHN-MOTORENTECHN 00810325 WALKER MANUFACTURING 21833 WHITE 027076545 = More information = New: No Part suitable for: Ginaf Type number: M100048 / OG0000017213

Condition: used, filter area: 60 m², suction capacity: 5,000 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. PLYMOVENT MDB Multi Dust Bank Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Itjdpfxowbtczj Ahyeb The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. 5.5 kW fan complete with noise silencer Efficiency 5000 m3/h Filtration area 60 m2 Filter inserts 4 pcs. Inlet diameter 315 mm The device is in very good technical condition.

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables Itsdpfxjn Nw Ntj Ahysb extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Itjdpfx Aottah Ujhysb Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Ijdpfx Ahsrhidmeyetb Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.