Used Solid Tb 16 S for sale (76,143)

Condition: good (used), Year of construction: 1992, machine/vehicle number: 530640, Offer 26203 Technical data: - Drilling capacity - in steel: 16 mm - Drilling capacity - in aluminum: 20 mm - Drill spindle connection: MK 2 - Drilling depth: 100 mm - Spindle/column overhang: 215 mm Credpfxjz Dgbde Acpsh - 6 drill spindle speeds, stage 1: 200 - 1600 rpm - 6 drill spindle speeds, stage 2: 400 - 3200 rpm - Drive: 400 V / 0.7 kW - Drilling table with T-slot: B 250 x D 320 mm - Max. distance drill chuck / table: approx. 220 mm - Space required: approx. W 300 x H 1050 x D 450 mm - Weight: approx. 100 kg - Quick-change drill chuck: 1 - 13 mm - Coolant system - Original machine base cabinet

Condition: ready for operation (used), Drill diameter: 16 mm Spindle mount: MK 3 Overhang: 240 mm Quill travel: 100 mm Spindle speeds, infinitely variable via pole-change motor and 2 groups: 250 - 4000 rpm Drive motor: 380 V, approx. 1/1.3 kW Cedpfezh H Nxex Acpsrh Approximate footprint: 2200 x 620 x total 1770 mm Approximate weight: 280 kg

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions Cjdpfx Acjz Ikq Djporh 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), 1 x Bench drill with threading attachment. Solid TB 13 Crjdpfx Acowyw Apepeh in good technical condition. Technical data: Chuck: BT 16 Speeds: 200 - 3200 rpm Table clamping surface: 260 x 330 mm Accessories: 1 x Röhm drill chuck 1 - 13 mm with key 1 x Threading chuck The machine can be inspected while powered on.

Condition: used, Year of construction: 2007, Heating plate press Crjdpfx Aozuzxnscpjh Manufacturer: OTT Type: Solid 16-32 Year of manufacture: 2007 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes Crsdjywnr Njpfx Acpoh ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: ready for operation (used), Year of construction: 2010, Brand: DIXI Model: 60 SD Year of construction: 2010 Crjdpfx Acjz Iufrepoh Pressing force: 60 tons Voltage: 400 Maximum bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of filling opening: 115 cm x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited height. Video available upon request!

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3151, Stainless Steel Heated Filtration System for Machining Center Capacity: 28 l Max. Operating Pressure: 16 bar Max. Operating Temperature: 95°C Grundfos (Pump): Type: MTR15-14/12A-W-A-HUUV n: 2924 rpm Hz: 50 kW: 11 Q: 17 m3/h Hmax: 169 m Grundfos (Motor): Type: MG160MB2-42FF300-H3 Crsdpfswtga Rjx Acpsh The Wolftechnik stainless steel filtration system, custom designed for the machining center WTBF85-F50-SS-TTV-GD-PN16, offers a high-quality solution for filtration in demanding manufacturing processes. Its heating capability ensures continuous operation even at low temperatures, preventing disruptions in production. With a high-performance Grundfos pump and a reliable motor, the system provides efficient flow control and continuous filtration.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, 1. BARGSTEDT TBP16/DG/30/22/S Portal Loading System Vacuum portal for raw sheet loading (fixed edge on the right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Pallet return + light curtain protection Crodpjzh Uzisfx Acpoh 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for loading • Capacity approx. 12 pallets • Stacking height max. 1,800 mm

Condition: used, functionality: fully functional, power: 11 kW (14.96 HP), fuel type: diesel, empty load weight: 1,865 kg, Year of construction: 2016, operating hours: 3,096 h, drive type: Diesel, Mini excavator Condition: Ready for use and fully functional Technical condition: good Description: Excavator - tracked excavator - mini excavator Takeuchi TB 216 - - - hydraulic quick coupler - - - hydraulic adjustable undercarriage 100 --> 130 cm - - - year of manufacture 2016 - - - 3096 operating hours - - 2 used digging buckets 30 + 50 cm - - - 1 used ditching bucket 100 cm - - - 3-cylinder Yanmar diesel engine 16 hp - - 1865 kg operating weight - - - good rubber tracks - - - joystick on lever - - - long digging arm - - - hammer line - - - good condition!! Quick coupler, buckets, 3rd valve, 4th valve, work lights (rear), work lights (front), heater, full cab, CE certificate. Codpfxoz Ivd As Acporh

Condition: excellent (used), Air-operated, water-cooled rocker-arm spot welding machine Brand DALEX Type SL 16/S Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Secondary open-circuit voltage: 1.8 - 3.5 V Electrode force: 278 daN Cjdpev Sql Njfx Acpjrh Arm reach: 180-500 mm adjustable Arm spacing: 140 or 300 mm With 8-position switch for power preselection Additional control unit 1036

Condition: ready for operation (used), Brand: Dixi Type: 16 S Crodpfxsz Ep Sne Acpeh Pressing force: 5 tons Voltage: 400 Maximum bale weight: 100-150 kg Machine dimensions: 147 x 80 x 196 cm Feed opening dimensions: 102.5 cm x 68 cm Machine weight: 840 kg

Condition: used, functionality: fully functional, power: 11 kW (14.96 HP), fuel type: diesel, empty load weight: 1,865 kg, Year of construction: 2014, operating hours: 3,618 h, drive type: Diesel, Mini excavator Condition: Ready for use and fully functional Technical condition: good Description: Excavator - tracked excavator - mini excavator Takeuchi TB 216 - - - POWERTILT - - - hydraulic quick coupler - - - hydraulic adjustable undercarriage 100 --> 130 cm - - - year of manufacture 2014 - - - 3618 operating hours - - 1 new digging bucket 30 cm - - - 1 used digging bucket 50 cm - - - 1 used ditching bucket 85 cm - - - 3-cylinder Yanmar diesel engine, 16 hp - - 1865 kg operating weight - - - good rubber tracks - - - long digging arm - - - Powertilt on joystick - - - hammer line - - - good condition!! Crjdpfxjz Ivdvo Acpeh Quick coupler, buckets, 3rd valve, 4th valve, rear work light, front work light, heater, fully enclosed cab, CE certificate.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5500x4000x2250 mm Weight 8000 kg Total power requirement 45 kw Cjdpfx Aov A Hlmecpjrh

Condition: used, Motor with 3 speeds cleaned, function tested, trial run used Make: Solid Type: B 16 Machine no.: 532377 Morse taper spindle Drill chuck: keyless/keyed 2 x keyless x keyed Throat depth: 250 mm Spindle stroke: 100 mm 21 speed steps from 200-2800 Motor: 3 speeds Crjdpfsw En H Aex Acpjh Lighting Table size: 330 mm x 330 mm Machine vice Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition No warranty or guarantee

Condition: used, functionality: fully functional, power: 11 kW (14.96 HP), fuel type: diesel, empty load weight: 1,865 kg, Year of construction: 2017, operating hours: 2,032 h, drive type: Diesel, Mini excavator Condition: Ready for use and fully functional Crjdpfx Aez Ifm Tecpsh Technical condition: good Description: Excavator - tracked excavator - mini excavator Takeuchi TB 216 - - - POWERTILT - - - hydraulic quick coupler - - - hydraulic adjustable undercarriage 100 --> 130 cm - - - year of manufacture 2017 - - - 2032 operating hours - - 2 used digging buckets 30 + 50 cm - - - 1 used ditching bucket 120 cm - - - 3-cylinder Yanmar diesel engine 16 hp - - 1865 kg, EC compliant - - - major service recently carried out - - - good condition!! Quick coupler, buckets, 3rd valve, work light rear, work light front, heater, full cab, CE certificate.

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Cutting length, maximum: 4,000 mm Cutting length, minimum: 170 mm Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Codpfx Acszm I Dhepsrh Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: • High-quality PC with a 19-inch TFT color monitor • USB ports • DVD drive • Keyboard • Windows operating system • Remote maintenance via the internet

Condition: not inspected (used), Year of construction: 1971, functionality: unexamined, power: 992.92 kW (1,349.99 HP), fuel type: diesel, number of cylinders: 16, type of cooling: water, MWM 16-cylinder engine removed from a decommissioned inland vessel. The engine was operational at the time of removal. It has been stored for approximately 11 years. Functionality has not been tested. Crsdew Aphcspfx Acpsh Loading is possible. Sale only to commercial buyers and under exclusion of any warranty.

Condition: used, Year of construction: 1998, Technical details: bore capacity in steel (diameter): 15 mm bore stroke: 100 mm threading: M16 number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 Credeu Idutopfx Acpoh spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm 2x quick chuck 10mm *

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Cedjulpmzopfx Acporh Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Cjdpfx Acjmi Rpiopjrh 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: good (used), Year of construction: 1997, functionality: fully functional, 1 x CNC long-turn lathe Star SA 12/16 Year of manufacture: 1997 Control system: Fanuc 18 i-T with loading magazine Iemca CH 220/32 Year of manufacture: 1998 Technical data: Spindle bore: 16 mm Crsdpoz Hccisfx Acpjh Spindle travel: 140 mm Main spindle speed: 500 - 12,000 rpm Counter spindle speed: 500 - 8,000 rpm Speed: driven tools: 0 - 4,000 rpm (remaining data see photos) Approximately 6 months ago, the counter spindle was fitted with new bearings. The machine can be inspected while in operation and under power.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 Crjdezu T Smepfx Acpoh 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: used, mileage: 1,001 km, first registration: 01/2005, color: blue, driver cabin: other, gearing type: other, loading space volume: 16 m³, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Year of construction: 2005, Vehicle location: Bovenden, steel superstructure, left-hand on-board mechanism Body: 1-sided tipper body approx. 16.5m³ with board-matic left and space for rear crane Subframe rear longer for rear crane mounting! Dismantling of DAIMLER-BENZ Actros 3341 K 6x4 with rear crane! Crodpfxevhk Txe Acpoh The exact year of construction cannot be determined as there is no longer a type plate! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Year of construction: 1988, turning height: 1,275 mm, workpiece weight (max.): 1,600 kg, turning diameter: 1,900 mm, faceplate diameter: 1,600 mm, workpiece diameter (max.): 1,800 mm, overall weight: 27,200 kg, Equipment: documentation/manual, max. dia peripheral turning - 1800 mm max. dia facing - 1900 mm accesories (toll holders, 2 pcs. of face plates) Credpfx Acez H Ad Hjpsh The machine is equipped with the original system. A retrofit to the Siemens Sinumerik control system is a suitable option.