Used Spindle Drilling Machine for sale (64,453)

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW Kjdpfevpfzyox Ab Tsln weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: used, Technical details: number of spindles: 4 bore capacity in steel (diameter): 2-16 mm bore stroke: 140 mm drill spindle - Morse Taper: MK 3 spindle throat: 280 mm spindle distance: 455 mm headstock adjustment: 250 via Hand - Kurbel mm Kedpfx Aju Idugeb Tjln feed:: 0,08 - 0,12 - 0,20 - 0,31 / 4 steps mm/U feed:: automatic + manuell spindle speed:: 180 - 2000 / 8 steps U/min distance between table/spindle: min. 3x 140mm und 1x 260mm mm distance between table/spindle: max. 3x 700mm und 1x 820mm mm table surface area: 1800 x 350 mm table adjustment: 300 via Hand mm total power requirement: 6,3 kW weight of the machine ca.: 2,4 t dimension machine xH: 2,1 x 0,9 x 2,2 m Application: Drilling, countersinking; reaming and thread cutting. Each drill spindle has its own drive motor Equipment: Foot pedal/operation Hand crank *

Condition: used, Year of construction: 1982, Technical details: bore capacity in steel (diameter): 28 mm throat: 300 mm bore stroke: 150 mm drill capacity in cast iron: 30 mm spindle taper MT: MK3 Klodsu Idkbepfx Ab Tsn spindle speed:: 200; 300; 500; 800; 1250; 2000 / 6 step U/min feed: manuell mm/U Distance spindle/table max.: 50 - 600 mm table clamping surface:: 330 x 300 mm table rotating: nein ° drill table adjustment: 550 (Handkurbel) mm column diameter: Ø 125 mm total power requirement: 1,5 kW weight of the machine ca.: ca. 300 kg dimension machine xH: 0,7 x 0,45 x 1,87 m Equipped with RÖHM Supra 3 - 16mm quick-action chuck Machine vice *

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm Klodpfx Aou Idhyob Tjn spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm Kjdex Afn Nepfx Ab Toln

Condition: like new (used), We offer spare parts for UW1E machines: Grinding spindle HSK50 belt drive for Saacke UW1E New ball screws Frequency converters NUM IO modules Servo motors Kledpsylp Umsfx Ab Ton New coolant valves etc. Please contact us with your enquiry.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm Kedpjq Ii Dlsfx Ab Tsln max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Kedpsylp Slsfx Ab Toln Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1986, machine/vehicle number: 104, 1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling FoellmerBaujahr / Year 1986- Serial-No. 104 4 Online-Video-Inspection by Skype-Video Kjdpfx Abeh Aw Uns Tsln We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1998, machine/vehicle number: 18109, 2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citoborma 280bYear 1998 Klodpfx Abjh Axrks Ton Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1984, machine/vehicle number: 106, 4-Spindel-Papierbohrmaschine - 4-head spindle paper drilling Josef Foellmer IRAM 200Year ca. 1984 - Serial-No. 106 Drilling area 3 - 10 mm Drilling distance variabel 36 - 430 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Klodpfxsh Axado Ab Tsn On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 13164, 1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling Nagel Citiborma 150Serial-No. 7404 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kljdpfxsh Aw Ugj Ab Tjn On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 13270, 1-Head paper drilling Nagel CitibormaYear - Serial-No. S129 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kodpjh Aw Ukefx Ab Tjln

Condition: used, machine/vehicle number: 71789, 2-Spindel-Papierbohrmaschine / 2-head spindle paper drilling Hang 136DSerial-No. 71789 Seitenanschlag Side stop for fine adjustment Tiefenanschlag / Depth stops for fine adjustment Stapelhöhe / Stacking height max. 50mm Bohrdurchmesser / Drill diameter 2 – 14 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Klsdormulyjpfx Ab Tsn

Condition: used, machine/vehicle number: 304486, 1-Spindel-Papierbohrmaschine / 1-head spindle paper drilling LIHIT MC 1015 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Kodpfx Aoh Axxqob Toln Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, sehr schöne Tischbohrmaschine von IXION BST 13 very nice Drilling machine IXION BST 13 Kodpfx Aoxp H Dxsb Tjln Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Bohrunterlage mit Bohrbandmechanik inklusive eines Bohrbands / Drilling pad with drill band mechanism including a drill band Papierbohrmaschine / Paper Drilling machine Dürselen Corta PB 04 N  Baujahr / Year 2013 - Serial-No. PB04.01.03.1629 4 Bohrköpfe / 4 Drilling Heads Stapelhöhe / Stack high max. 50mm Einlegetiefe hinter den Bohrern / Depth behind the Drilling heads 42mm Klsdpfx Ajxn S Itob Ton Lochabstand / Hole distance 31,7 - 293mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 Serial-No. 60654 Seitenanschlag  Side stop for fine adjustment Klsdpfx Asxu T Alob Ton Tiefenanschlag / Depth stops for fine adjustment Stapelhöhe / Stacking height max. 50mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1998, Saacke UWIC Machine type: Universal CNC Tool Grinding Machine Manufacturer: Saacke Kedsyk S Nwopfx Ab Tsln Model: UWIC Year of manufacture: 1998 Control type: CNC control with parameter release Technical Specifications: - 2 CNC-controlled axes - CNC control with parameter release - Grinding in a single setup (no need to convert hand tool holder, spiral grinding device, or radius device) - Camera - Grinding with CNC quality

Condition: good (used), MAS VR8A Arm 2500 mm MC 6 10,000 kg Ksdpfsxx Dapex Ab Tjln

Condition: ready for operation (used), GILLARDON GB 20 – Column Drilling Machine from University - Infinitely variable speed control - Equipped with MK 3 adapter - Maximum drilling capacity in steel: 30 mm - Throat: 285 mm - Quill travel: 150 mm - Table clamping surface: 400x400 mm - Table height adjustment approx. 650 mm - Adjustable drill depth stop - Speed display - Emergency stop - Work lamp - Foot switch - Documentation Dimensions (LxWxH): 0.7x0.6x1.8 meters / Weight: 650 kg Klodpfxjyk Dl Rs Ab Ton Subject to errors and input mistakes

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Kljdexr Dlxspfx Ab Ton

Condition: good (used), Year of construction: 2000, Drilling unit SUHNER Mono master Type: BEM12 ST25 1040, year 2000, equipped with Siemens motor. Klsdpfx Abexr Dk Ue Tjn

Condition: ready for operation (used), Year of construction: 1975, Column drilling machine Make CORDIA Type: S-18 Year.ca.1975 drilling in steel max.18mm spindle mounting : MK2 spindle speed : 90 -1450 rpm spindle stroke : 120 mm table:350 mm X 400 mm clamping surface;270 mm X 320 mm Space requirement : width 420mm depth 650mm height:2000 mm Kledpfehtri Eex Ab Ton Weight:ca.350 Kg. Machine is ready for use .

Year of construction: 1970, condition: ready for operation (used), Box column drilling machine Make ALZMETALL Type:AB4 HST Year 1970 with coolant device . drilling capacity in steel max : 40 mm spindle mounting : MK4 spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev table size : 600X460 mm Machine is ready for use . Kledomp Tp Hjpfx Ab Ton