Used Spit 352 for sale (1,383)

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Djdpjl Tn Epsfx Ah Ujcp

Condition: used, Piston diameter: 50 mm piston diameter: 50 mm stroke: 100 mm Stroke: 100 mm * Piston diameter: 50 mm, * Stroke: 100mm. Dcedpolkciaefx Ah Ujp

Condition: new, Motor power 1,1/2,2 kW belt opening 130 mm belt dimensions 350x32x2,5 weight 220 kg Speed 30/60 1/min. Cutting surface 0° 115 / 100 / 130x80 Cutting surface 45° right 100 / 85 / 90x80 Cutting surface 45° left 75 / 75 / 90x65 Cutting surface 60° right Cutting surface 60° left Description Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power. Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand. Basic equipment: clutch adjustable from the outside Blocking device with vice Sliding on prismatic guide with adjustable bar Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line. Adjustable fixing of the degasser, made entirely of steel. Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform. The machine can be lifted. Endless worm shaft mounted on pair of bearings. Saw blade holding shaft mounted on off-center punch. 2 speeds 30 and 60 rpm. Vise opening 130 mm Machine is supplied without saw blade. Dodpfocgrkyjx Ah Uscp Electrical equipment: Electrical control panel marked cable connections main safety switch provided for padlock Emergency stop device Phase failure protection Speed changeover switch Thermal magnetic protection Undervoltage release Motor with IP 54 protection Low voltage system 24 Volt Electric coolant pump 48 V Motor 1,1/2,2 kW - 400 Volt For further technical data please refer to the attached PDF document.

Condition: excellent (used), Year of construction: 2021, Robotic welding cell consisting of: WIG ARC World Ivo SC and a rotary/tilt table, enabling rotation and tilting of the component with the positioner in relation to the 6 robot axes. The robot and the rotary-tilt table are mounted on a shared baseplate. Yaskawa MOTOMAN industrial robot AR 2010 with YRC-1000 controller. System dimensions: 3000 × 2600 × 2800 mm (L×W×H). Positioner load capacity: 250 kg. Interface for control of EWM welding technology, system integration, TCP control. WIG welding technology, consisting of: welding power source Tetrix 352, cooling unit Cool 82, wire feeder, hose package, drive motor, welding torch AbiTig WH 400 W. Dcsdpfjw Amdusx Ah Uop Caremaster stationary mechanical filter unit. Clamping device for workpieces to be welded is not included in the scope of delivery.

Condition: used, Year of construction: 2013, Second hand automatic shape glass cutting table (jumbo), BOTTERO Type 352 BCS-J, Year 2013 Dodpfxewfhids Ah Uscp

Condition: new, Year of construction: 2024, Aluminum circular saw UK 352 P, manual Dcodpfx Aoidunvjh Uop The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Blade cutting speed: 1700/3400 rpm Cutting angle: from -45° to +45° Cutting capacity: at 0° – round: 120 mm, square: 105 mm, rectangle: 180x70 mm Dcsdewu Tz Rjpfx Ah Ujp Touchscreen Machine weight: 605 kg

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 352 NC EVO, Semi-automatic circular saw for sawing aluminum and light metal alloys, using carbide-tipped circular saw blades. Includes dust extraction and material handling (roller conveyors). Machine for miter cuts from 45° right to 45° left. The vertical alignment allows for sawing operations with the head tilted between 0° and 45° left. Dcodpfx Ahjv T U Tgj Usp

Condition: new, MEP TIGER 352 NC 5.0 [Fully automatic] Dsdpfochhhdex Ah Uocp Article number TI352NC motor power 3,0 kW belt opening 190 mm belt dimensions 350x32x2,5 weight 680 kg Speed 15 - 90 m/min. Cutting surface 0° 115 / 95 / 180x95 Cutting surface 45° right 110 / 95 / 125x95 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Electro-pneumatic, vertical, linearly guided automatic saw for the use of HSS saw blades to make serial cuts from 60° left to 45° right on steel. The machine also works in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by MEP control, latest generation, which allows to program 1000 different cutting programs, each with different cutting length and number of pieces, for the same material thickness. FEATURES: -New centralized control panel on articulated arm to allow operators to easily reach the emergency stop switch from any working position. -NEW: Fieldbus communication system (Modbus protocol) with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: + saw band speed + number of cuts programmed and executed + saw band thickness + feed length + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -NEW: Display and recording of the alarm and error messages with the possibility of displaying the incidents that have occurred. -NEW:

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Dcjdpfxogwt Rve Ah Uep

Condition: new, MEP COBRA 352 SX evo [Semi-automatic] Article number CB352SX motor power 1,5/2,2 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 285 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Semi-automatic circular saw for sawing of solid and hollow aluminum materials and light alloys with electro-welded carbide tooth wheel. Basic equipment: -Machine for miter cuts from 45° right to 45° left. -Alignment along the vertical gives the possibility of sawing operations with head inclined between 0° and 45° left. -* MEP represents the latest generation of controls designed for semi-automatic machines with single axis microprocessors. -CHARACTERISTICS: At the start of the cycle: - Vise closes and motor starts - Saw head lowers for cut - Motor stops - Saw head raises - Vise opens. -New - Display with 16 characters x 2 lines for displaying the following technical parameters: + number of executed cuts + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -New - Display and entry of the alarm and error messages with the possibility of displaying the incidents that have occurred. Electrical equipment: -New - Low voltage control panel: membrane polyester keypad with thermoformed and highlighted push buttons and actuation control signal. Dsdpechkv Iefx Ah Ujcp -Saw blade stroke programmable directly from the control panel, to adapt to the cutting material. -Ball bearing mounted rotary table to ensure easy and accurate rotation. -Clamping system consisting of two face vices that can be freely arranged along the longitudinal axis of the parts. -Adjustable mechanical stops for quick positioning of the head in the angular positions at 0° and 45° right and left. -Swarf extractor with preparation for OPTIONAL extraction system. -Automatic saw blade lubrication system, operating only at the start of the cut. -Machine is supplied without saw blade. -Preparation for the installation of the minimal lubrication kit of the saw blade (OPTIONAL), besides the conventional standard lubrication with emulsion oil. -Tool and instruction manual with spare parts list. For further technical data, please refer to the attached PDF document. Catalog 2nd page !

Year of construction: 2023, condition: new, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed Dodpfx Aegwt Ryeh Ujcp • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, MEP COBRA 352 NC 5.0 [Fully automatic] Article number CB352NC 5.0 motor power 2,6/3,5 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 600 Kg Speed 1700/3400 1/min. Dodpschkwhofx Ah Uscp Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Automatic cross-cut saw with semi-automatic function for sawing aluminium and light alloys. Mitre cuts from 45° right to 45° left and saw head can be tilted 0°-45° to the left. It is controlled by multi-microprocessors, while two NC controlled axes allow to program 1000 different cutting programs, each with a different number of pieces and length, for the same material. -New centralized control panel on an articulated arm, so that the machine can be easily operated from any working position and the emergency stop button can be pressed at any time. -Fieldbus communication system with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: Number of cuts programmed and executed, saw band thickness, feed length, cutting time, ammeter, display of over 100 diagnostic messages and warnings. -New - Display and recording of alarm and error messages with the possibility of displaying the incidents that have occurred. New - Material feed of 600 mm with cutting motor and recirculating ball screw mounted on opposite ball bearings.

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast, convenient material changes as well as simple mitre angle adjustment. The UK 352 HA has a continuously adjustable mitre range of up to 45° on the left and 0° on the right. The saw feed is automatic at the touch of a button and the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Equipment Dcodpfsgwt Rrox Ah Usp - Precision underfloor circular saw - Mitre adjustment left 45º / 90º / right-45º degrees - incl. 2 pneumatic clamping vices (vertical) - Saw blade feed infinitely adjustable - Two-hand safety control - Adjustable material stop (rear) - Extraction device - chip extraction system - Mist spraying device for air-oil cooling - Air gun with spiral hose - incl. maintenance unit with pressure reducer - Ergonomically arranged control panel - Max. cutting height 125 mm - Saw blade 350 mm - Saw blade not included in scope of delivery! It is possible for you to view the desired system in our production/demonstration hall at any time. Please do not hesitate to contact us. Plantec Maschinen GmbH

Condition: new, MEP COBRA 352 MA Article number CB352MA motor power 2,2 kW belt opening 180 mm belt dimensions 350x32x3,4 weight 210 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Dcodpschku Ssfx Ah Usp Manual circular saw for sawing aluminium, mitre cuts from 45° right to 45° left and saw head can be tilted 0°to 45° to the left. On the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. Basic equipment: -Roller bearing mounted rotary table for fast and precise mitre adjustment. -screw lock to lock the saw head in any angular position -Automatic saw blade lubrication -Clamping system consisting of two vices -Saw head locking in the upper position -Adjustable length stop for cuts of the same length -Vice opening 180 mm -incl. tools and operating instructions Electrical equipment: -control panel -marked cable connections -indicator light for operational readiness -Main safety switch -emergency stop button -speed changeover switch -thermal magnetic protection -Undervoltage release -Switch handle Protection class IP 55 -low voltage system 24 Volt -Motor 1,5/2,2 kW - 400 Volt For further technical data, please refer to the attached PDF document.

Condition: new, Year of construction: 2024, Aluminum circular saw UK 352 M, manual The UK 352 M manual circular saw is an "upcut" machine and is mainly used for individual cuts in aluminium, copper profiles and hard plastics (requires solid material). The The machine is characterized by easy handling and fast, convenient changing of the material and simple adjustment of the miter angle. The UK 352 M has a stepless adjustable miter range left up to 45° and right up to 0°. The saw feed is manual via a hand lever, the material is clamped manually. equipment Double miter 45° - 90° - 0°, large support plate, powerful drive motor Clear control panel A manual clamping cylinder Fixed material feed jaw can be moved backwards to increase cutting capacity large protective hood, covers the entire work area Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! Dcjdpfjidunnex Ah Uep It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, empty load weight: 5,730 kg, maximum load weight: 31,270 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 05/2012, next inspection (TÜV): 07/2026, total length: 25,500 mm, total width: 39,500 mm, total height: 115,000 mm, suspension: air-lift, tire size: 385/65 R22,5, color: white, Year of construction: 2012, front tire size: 385/65 R22,5, rear tire size: 385/65 R22,5, brakes: other, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, color white, air suspension with lift function, 3rd axle liftable, disc brakes, fixed side underrun protection, 1 storage box, side work lights (3x left/2x right), empty pipe holder left, Alcoa aluminum wheels, load pressure gauge, Wabco Smartboard, LED reversing lights, 6 compartments, 6 manhole covers, pneumatically folding catwalk, reversing camera Djdpfxow Ibhdo Ah Ujcp

Condition: used, axle configuration: 3 axles, first registration: 10/2014, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2014, Axle configuration Tyre size: 385/65 R22.5 Axle make: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: tyre tread left: 6 mm; tyre tread right: 6 mm Rear axle 2: tyre tread left: 8 mm; tyre tread right: 7 mm Rear axle 3: tyre tread left: 6 mm; tyre tread right: 7 mm Weights Unladen weight: 6,040 kg Payload: 31,960 kg Gross vehicle weight: 38,000 kg Condition Djdpfext Eczjx Ah Uscp Damages: none

Condition: used, maximum load weight: 34,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2003, loading space volume: 37 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Silo body for bulk materials, total capacity 37,000 liters, 1 compartment(s), 3 manhole covers, 2 bottom valves, central discharge, connection for pneumatic unloading, hose box, catwalk with mechanically foldable railing on tank, ABS, EBS, "ROR" axle(s), disc brake system, air suspension, ALCOA aluminum rims. Vehicle may be covered with advertisements and/or lettering. Dedpfxow I I Ane Ah Ujcp Our offer does not generally include new TÜV approval. If new TÜV inspection is required, we are happy to provide an offer from our partner workshops! Vehicle may be covered with advertisements and/or lettering. Our general terms and conditions of delivery and payment apply. We are pleased to provide you with a financing or leasing proposal for this item. Please contact us!

Condition: good (used), axle configuration: 3 axles, first registration: 09/2014, loading space volume: 39 m³, total length: 10,200 mm, total width: 2,550 mm, suspension: air, wheelbase: 7,450 mm, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - Central lubrication = Notes = 3 compartments, fabric filter steering axle lift axle, aluminum rims = Further Information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 10,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear axle 2: Max. axle load: 10,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear axle 3: Max. axle load: 10,000 kg; Steered; Tire tread left: 40%; Tire tread right: 40% Weights Unladen weight: 6,560 kg Payload: 38,440 kg Gross vehicle weight: 45,000 kg Functional Body manufacturer: Spitzer Number of compartments: 3 Hoses: Yes Condition Dsdpfxexpiqne Ah Uecp Technical condition: good Visual condition: good Further information Please contact Andre, Henri, or Andre for more information.

Condition: excellent (used), Rolling Grain rotating high performance tip MK 5 cone tip 60 degrees Dodpfx Aheiuvuqs Uecp diameter cone tip 58 mm diameter housing 120 mm Total length 300 mm Weight 9,5 kg

Year of construction: 2023, condition: as good as new (ex-display), From insolvency: still unused clamping device Spitznas with automatic feed model 512089940 in original case + manual Dodpfsk T Au Nex Ah Uecp

Condition: used, empty load weight: 6,775 kg, maximum load weight: 27,225 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 11/2002, next inspection (TÜV): 12/2025, total length: 25,500 mm, total width: 40,000 mm, total height: 133,000 mm, suspension: other, tire size: 385 / 65 R 22,5, Year of construction: 2002, front tire size: 385 / 65 R 22,5, rear tire size: 385 / 65 R 22,5, brakes: other, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW with disc brakes, air suspension, 2 storage boxes, 2 holders for fire extinguishers, hydraulic tipping lock, pneumatic vibrator, NATO socket for own hydraulics, hydraulic rear supports, 3 + 3 empty pipe holders, Alcoa aluminium rims, grounding cable on cable reel, catwalk with folding handrail, trailer interior not cleaned—residual flour remains in trailer, next periodic inspection 09/2026, next visual inspection 09/2029. Djdpfxewxf Auj Ah Uecp

Condition: used, maximum load weight: 33,870 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2003, loading space volume: 43 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Silo structure for bulk materials, total capacity 43,000 litres, 1 compartment(s), 3 dome covers, 2 bottom valves, central discharge, connection for pneumatic unloading, hose box, catwalk with mechanically folding railing on tank, ABS, EBS, BPW EcoPlus axle(s), disc brake system, air suspension, ALCOA aluminium rims; vehicle may be covered with advertising wraps and/or graphics. Our offer generally does not include new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with a quote from our partner workshops! Vehicle may be covered with advertising wraps and/or graphics. Our general terms and conditions of delivery and payment apply. Dodpfow I I Ahox Ah Uecp We will gladly provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, empty load weight: 5,690 kg, maximum load weight: 28,310 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 02/2009, total length: 25,500 mm, total width: 39,500 mm, total height: 115,000 mm, suspension: air/air, tire size: 385 / 65 R 22,5, color: white, Year of construction: 2009, front tire size: 385 / 65 R 22,5, rear tire size: 385 / 65 R 22,5, brakes: other, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW with disc brake, suspension air/air, lifting and lowering, storage box 1, tool box, walkway with folding handrail, work lights, loading gauge, aluminum rims, rear view camera, next external inspection: 08.2025 next internal inspection: 02.2029, Dedpfx Aevrk Iqoh Uecp