Used Steel Coil Slitting for sale (17,906)

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Hnjdpfxexqfwtj Abrsh Length: 17.10m

Condition: used, tank capacity: 9,140 l, GENERAL Equipment: Crane lugs Construction type: Suspended Remarks: Maximum operating pressure heating coil 35 bar; 3 legs, steel; Manhole diameter approx. 490 mm; several external components made of steel, e.g. manhole cover flange and insulation rings around the cylinder Internal diameter: 1,990 mm Total height: 3,750 mm Heating/Cooling: available Max. permitted operating temperature: 242 °C Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 9,140 liters Double jacket volume: 219.0 liters Cylinder wall thickness: 6.3 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,400 mm Last application: Processing of wool grease VESSEL Max. permitted operating temperature: 200 °C Base type: On support legs HEATING/COOLING JACKET Internal temperature control: Full pipe coil EQUIPMENT Manway/Hatch: In the cylinder Outlet: 160 mm Hnjdpfx Asyck Ddobreh Remark: Outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Top wall thickness: 6.3 mm

Condition: new, Year of construction: 2026, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, CUT-TO-LENGTH LINES Thickness: 0.20 mm – 25 mm Width: 300 mm – 2500 mm Hjdpfx Aoykka Uobrjnh CRONOSSTECH Cut-to-Length Lines are engineered to deliver high accuracy and stable line performance over a wide range of thicknesses and widths. Each line is technically configured considering the type of material to be processed, thickness range, target production speed, and tolerance requirements. Suitable Materials • Hot-rolled steel • Cold-rolled steel • Galvanized steel • Aluminum alloys • Pickled materials The systems are designed for materials complying with TSE, DIN, ASTM, JIS, and BS standards. System Configuration Depending on the project, the line may include the following components: • Decoiler • Leveler • Servo measuring and feeding system • Precision cut-to-length unit • Automatic stacking system • Automation and line integration For Technical Evaluation To determine the appropriate capacity and line configuration, please share the following information: • Type of material • Maximum thickness and width • Target line speed • Tolerance expectations • Level of automation Our technical team will evaluate your request and offer the most suitable solution. CRONOSSTECH Engineering-Focused Industrial Systems

Condition: new, Year of construction: 2025, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 4 mm, coil weight: 20,000 kg, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness brass (max.): 4 mm, cutting speed: 90 mm/min, product height (max.): 4 mm, working width: 1,600 mm, type of input current: three-phase, total width: 6,000 mm, total length: 28,000 mm, total height: 2,600 mm, feed roller diameter: 126 mm, operating speed: 60 mm/s, inner diameter: 508 mm, input voltage: 380 V, product width (max.): 1,600 mm, number of feed rollers: 2, number of straightening rollers: 17, power: 145 kW (197.14 HP), RAEDY IN STOCK ---> COIL SLITTING LINES Coil Slitting Line is a machine specially manufactured for slitting master coil in to baby coils. Coil Slitting Lines consist of the following equipment and units; Coil Car / Loading Trolley Decoiler / Uncoiler / Coil Unwinder Strip Transfer Unit Straightener / Leveler Strand Extensioner Leveler Slitting Head witg Slitting Knives Spare Slitting Head and Knives for Quick Change Scrap Recoilers / Winders First Strip Transfer Unit Strip Tension Control Separator Units and Parts Coil Rewinder System Coil Extraction and Easy Handling System Exit Car Hjdpfx Absh Dy Iyersnh Hydraulic and Pneumatic Systems Electronic Control Panels

Condition: new, Year of construction: 2024, sheet thickness aluminum (max.): 1 mm, coil weight: 10,000 kg, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness copper (max.): 1 mm, sheet thickness brass (max.): 1 mm, product height (max.): 1 mm, type of input current: three-phase, total width: 5,000 mm, total length: 17,000 mm, total height: 2,400 mm, power: 45 kW (61.18 HP), shaft diameter: 140 mm, warranty duration: 12 months, Combination of Coil Slitting and Cut to Length Line Hnsdpfxjh Dy S De Abrsh (0.3 - 1 mm X 1300 mm x 10 Ton) Galvanized, Statinless Steel, Aluminum Coils to be Slit Hydraulic Expansion Decoiler Coil Car Straightener Slitting Head with Knives and Spacers Hydraulic Shear Tensioner and Separators Hydraulic Expansion Recoiler Exit Coil Car

Condition: new, Year of construction: 2024, coil weight: 10,000 kg, number of straightening rollers: 9, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, blade shaft diameter: 160 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, sheet thickness brass (max.): 2 mm, product height (max.): 2 mm, outer diameter: 1,400 mm, roller diameter: 100 mm, coil width: 1,300 mm, coil outer diameter: 1,300 mm, number of blades: 32, type of input current: three-phase, cutting length (max.): 3,000 mm, working width: 1,300 mm, total width: 3,500 mm, total length: 19,000 mm, total height: 2,500 mm, power: 80 kW (108.77 HP), Coil Slitting and Cut to Length Line 0.3 - 3 mm x 1300 mm x 10 Ton We offer accurate and fast cutting & slitting for coil materials; Stainless Steel, Aluminum, Copper, Galvanized, Brass, and Bronze. BOSPORAS’s Cut to Length & Slitting Line Machinery is a certain solution for various Materials and Dimensions, for your customized projects with heavy coil industries. Easy Operation with High-Level Automation. High Quality and Maximized Efficiency with Minimized Operation Cost High Capacity with Compact Design Project-Specific Straightening Designs for Top Quality Surface Accuracy Hodeh Dzpcepfx Abrenh Precision Production with Material-Specific Quality Rollers and Transfer System High Quality Cutting without Scrap Automated Stacking System Solutions Hydraulic Expansion Decoiler Coil Car Straightener Slitting Head Hydraulic Shear Tensioner and Separators Hydraulic Expansion Recoiler Exit Coil Car Quick Slitting Knife Change Coil Tilting Car

Condition: like new (used), Year of construction: 2025, functionality: fully functional, sheet thickness aluminum (max.): 10 mm, coil weight: 30,000 kg, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness copper (max.): 10 mm, sheet thickness brass (max.): 10 mm, cutting speed: 100,000 mm/min, product height (max.): 6 mm, working width: 2,000 mm, total width: 6,000 mm, total length: 35,000 mm, total height: 3,000 mm, feed roller diameter: 156 mm, Professional Coil Slitting Line 0.3 - 3 mm x 1500 mm x 15 Ton We offer accurate and fast cutting & slitting for coil materials; Stainless Steel, Aluminum, Copper, Galvanized, Brass, and Bronze. BOSPORAS’s Cut to Length & Slitting Line Machinery is a certain solution for various Materials and Dimensions, for your customized projects with heavy coil industries. Easy Operation with High-Level Automation. High Quality and Maximized Efficiency with Minimized Operation Cost High Capacity with Compact Design Project-Specific Straightening Designs for Top Quality Surface Accuracy Hjdpfx Aswutlvjbrenh Precision Production with Material-Specific Quality Rollers and Transfer System High Quality Cutting without Scrap Automated Stacking System Solutions Double Head Hydraulic Expansion Decoiler with Transmission Box Coil Car Match Leveler Slitting Head Hydraulic Shear Tensioner and Separators Hydraulic Expansion Recoiler Loop with Sensors Automated Hydraulic Bridges Exit Coil Car Quick Slitting Knife Change Coil Tilting Car

Condition: new, Year of construction: 2024, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 5 mm, coil weight: 4,000 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness copper (max.): 5 mm, sheet thickness brass (max.): 5 mm, cutting speed: 40,000 mm/min, product height (max.): 3 mm, working width: 600 mm, type of input current: three-phase, total width: 3,500 mm, total length: 12,000 mm, total height: 2,200 mm, Coil Slitting Line Satılık Rulo Sac Dilme Hattı Hjdpfx Abstpviqsrenh 0.5 - 3 mm Thickness x 600 mm Width x 6 Ton Coil Weight Ideal line for production of Galvanized Grounding Strip production. Topraklama şeridi imalatı e dar bant dilimleme işlemleri için ideal bir hat. Please contact for further details. #coil #slitting #coilslitting #slittingline #uncoiler #decoiler #slit #recoiler #tensioner #coilprocessing #earthing #grounding #grounding #GalvanizedGroundingStrip #GroundingStrip #Strip #topraklama #topraklamaseridi

Year of construction: 1986, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Hnedpfx Abjxxziuoroh

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Hedpfxorn Sqhj Abrsnh Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Hnedpfx Abstiy Ntsroh Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, 1200mm Stainless Steel Mobile Rotary Collecting Table 240 Volt with 380mm Mobile Conveyor, 240 Volt Hsdpjyimfzofx Abrsnh Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Overall dimensions: 5400 x 1500 x 720 mm Hodpfxjnqyz Is Abrjnh Track length: 9000 mm Drive: electric

Condition: like new (used), Year of construction: 2018, As-new horizontal sheet metal storage racks by Hakon Steel (2 units) Each rack comprises: 1x HR 400-200 3T/7+1 (lower section) Sheet size: 4000 x 2000 mm 7 pull-out drawers with drawer locking Load capacity per drawer: 3000 kg Usable drawer height: 110 mm Rack height: 1975 mm Rack width: 4520 mm Fitted with swing doors on the front and Hnodpfx Aoybbxpsbrsh 1x HSR 400-200 3T/7 (upper section) Sheet size: 4000 x 2000 mm 7 cassettes (+top drawer) Load capacity per cassette: 3000 kg Usable cassette height: 110 mm Rack height: 2480 mm Rack width: 4520 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 950 h, load capacity: 300 kg, mast type: free lift with telescopic boom, overall weight: 7,490 kg, fuel type: diesel, color: white, Equipment: ABS, The truck-mounted work platform 20m 3.5 t can be operated with a standard category B driving licence and is ideal for all tasks at heights. Delivery of the work platform is possible but will be invoiced separately. Hjdpfxexvmn Re Abrenh

Year of construction: 2025, condition: like new (used), functionality: fully functional, Stainless Steel Mixing Tank Hedpfeyhnn Rjx Abrenh 500l speed 23 rpm date of production 2024.12 used 3-4 times only

Condition: good (used), item: ITEM: AV-12099-VERTICAL-TANK External dimensions: Diameter 3000 mm Total H 6000 mm. Vertical stainless steel tank - 1 pc. Isolated with 100 mm rockwool completed with white trapezoidal plates. Flat sloaping bottom. Hjdpfxer Ny Axj Abronh Manhole bottom. Topmounted agitator. Jacket 1000 mm on cylinder. AISI 304.

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Hodpfxsxxqypo Abrenh Weight: approx 2 T 3 same plates available.

Year of construction: 1990, condition: used, Year of manufacture: Sep 2000 New: No Hodpfjvzyvpjx Abrjnh No guarantee. Please contact us if you can't find what you are looking for.

Condition: good (used), Marel Stainless Steel floor weighing scale Hedpfx Ajx Il Ntsbrjnh Marel weigher indicator M2200-P02 110-230 Vac, 0.24-0.12 A Dimensions scale: 900 mm x 900 mm.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, load capacity: 120 kg, empty load weight: 1,450 kg, Vehicle description OIL & STEEL Picchio 1265 (HINOWA) Year of manufacture: 2001 1,450 kg 12 metre working height 6.5 metre lateral outreach 120 kg lifting capacity - Bi-energy (diesel + electric drive) - Telescopic + articulated boom - Good tracks - Immediately ready for use Hnsdpox Nallefx Abrsh - New Austrian inspection log available before delivery upon request! Sale price: 15,900,-- net Affordable delivery possible!

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Hodpfx Abex Hz Dqsrsnh Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Condition: not inspected (used), Year of construction: 2010, empty load weight: 2,700 kg, Vehicle Description Tracked Aerial Platform OIL & STEEL Octopussy 1800 EVO Year of manufacture: 2010 Hour meter not functional! Working height: 17.8 meters Lateral reach: 8.5 meters Own weight only 2,700 kg - Bi-energy (diesel + electric) - Telescopic boom - Articulated boom Hjdpfsx Hzz Aex Abrjnh - Adjustable undercarriage - Non-marking tracks - New Austrian inspection book available upon request before delivery! Sales price: €22,900 net Low-cost delivery possible!

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide! Hsdpsvmbzwsfx Abronh

Condition: good (used), functionality: fully functional, Used stainless steel auger for sale. This auger was used for dipping diced potato in a preservative before packing but not limited to this. Hnsdpfx Aevkximjbrsh