Used Stm for sale (318)

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, Nwsdpfswrp Hksx Aaton product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (at tel. ). Seppi M. MINI-BMS 105 forestry mulcher / MS08 / 5-10 tons / CUT CONTROL / NEW / in stock & immediately available Price: €16,790.00 net / €19,980.10 gross Nedpfx Aaeyltvnstjwn - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches shrubs and trees up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 40 - 100 Intermediate adapter for BE314 Z1 - Approx. 200 mm high - Not required with OPT 372 hydraulic 190° swivel device Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net A self-contained hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single-sided unwinding reel ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Spreader: hydraulically operated Presser arm: hydraulically operated Take-up reel with auxiliary drive and brake Coil loading table, fixed + reel traversing device including: Lg 33221 High-performance strip straightening machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no. 001669 Maximum pass width: 620 mm Nsdpfshigmbex Aatown Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multiply supported to prevent deflection. Drive for all rollers via a distributor gearbox and universal joints. Used, as is, ex warehouse, immediately available. Overhaul possible upon request. Delivery time upon agreement. Further data will be available shortly or upon request.

Condition: ready for operation (used), Siemens 6SN1123-1AA00-0JA1 LT module SN:ST-MO2003829, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Nwsdpjxahfljfx Aatsn

Year of construction: 2008, condition: excellent (used), functionality: fully functional, The system was installed in 2008 but was used for a maximum of 2 years. It is located in the sorting hall and is in very good condition. Complete technical and operational documentation is available. CE certified. Currently (October 2, 2026), it is still connected to the power supply. Commissioning is possible. We will send you a presentation video upon request – please provide your email address. Waste sorting system: Loading conveyor belt 3000 x 901 mm, 1.5 kW, Inclined conveyor belt 7022 x 901 mm, 1.5 kW, Sorting conveyor belt 10522 x 901 mm, 2.2 kW, Unloading conveyor belt 7960 x 901 mm, 2.2 kW. Nwedsz Hbnwepfx Aatjn

Condition: ready for operation (used), Siemens SINUMERIK 840D/DE NCU 572.2 6FC5357-0BB21-0AE0 SN: ST-M82029648, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos Nedjz Acrlopfx Aatown

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW Nwodpfx Aaot Hwrhetjn weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, product height (max.): 100 mm, space requirement height: 1,750 mm, space requirement length: 1,200 mm, input frequency: 50 Hz, workpiece weight (max.): 300 kg, Equipment: type plate available, Alpha Brush KS-WBM Sanding Machine, Texture Brushing Machine This machine gives surfaces, such as profile boards for facades or wall cladding, a noticeably more sophisticated and rustic look! With up to 400 mm working width and customizable configuration for both softwoods and hardwoods, this machine is a versatile tool for carpentry workshops, planing mills, or joineries. We offer not only the texture brushing machine itself, but also the appropriate extraction unit and a variety of brush heads to equip the machine, allowing you to achieve your desired effect on wooden surfaces. In addition to this sanding automaton, we also supply coating machines that allow you to stain or finish boards and panels in one step. Nodpfx Aew Avrhsatjwn Do you have questions? We are happy to advise you individually on your requirements.

Condition: new, Year of construction: 2023, Storage location number: 100591044 Nsdpfx Aszkzd Ajatewn Transport dimensions (L x W x H): 0 x 0 x 0 ---- Emergency power supply – without sockets, for stationary operation only.

Condition: new, Year of construction: 2025, For sale: brand new / unused ZEISS Primovert inverted phase contrast microscope, supplied as a complete factory-configured kit in the original ZEISS packaging. This is one of 5 identical new Primovert units available. The complete configuration includes: ZEISS Primovert microscope stand, ref. 415510-1100-000 - Binocular tube - 4-position objective turret - Specimen stage 200 x 239 mm with metal stage insert - Binocular tube 45°/20 - Eyepieces 10x/20 Br. foc. - External power supply 100-240 VAC / 50-60 Hz - Dust cover - Original accessories and documentation Njdpjz E A Hfefx Aatown ZEISS LD Condenser 0.4, ref. 415510-1700-000 - Working distance 55 mm - Suitable for objective magnifications of 4x to 40x Objectives included: ZEISS Plan-Achromat 4x/0.10 Ph0 Ref. 415500-1619-000 Working distance 12.0 mm ZEISS Plan-Achromat 10x/0.25 Ph1 Ref. 415500-1605-001 Working distance 4.4 mm ZEISS LD Plan-Achromat 20x/0.30 Ph1 Ref. 415500-1614-000 Working distance 4.6 mm at D=1 mm ZEISS LD Plan-Achromat 40x/0.50 Ph1 Ref. 415500-1617-000 Working distance 2.7 mm at D=1 mm Phase contrast components included: Phase annulus Ph 0/0.4, ref. 415510-1810-000 Phase annulus Ph 1/0.4, ref. 415510-1811-000 3-position phase slider, ref. 415510-1805-000 Also included: ZEISS LED illumination for Primovert Ref. 415510-1201-001 Condition: New / unused The microscope is supplied in its original ZEISS box with original protective foam, documentation, and accessories. The unit has not been used in a laboratory setting. 5 identical units available. Available immediately from stock in Belgium. Worldwide shipping available. Please contact us for additional information, pictures, shipping quotation, or a formal offer.

Condition: ready for operation (used), Filling material: powder/granulates, bag types: valve bag, filling weight range: 25kg-50kg, max. bagging capacity: 300 bags/h. The machine was used for packing sand. An on-site inspection is possible. Nodpfxjwn H Uqe Aatjwn

Condition: new, axle configuration: 2 axles, suspension: air, tire size: 245/70-17,5, Equipment: ABS, - EBS - LED lighting - Alloy wheels - Air suspension - Spare wheel - Tool box - Central lubrication system - Additional steering axle Reference: 0-318 PAVIC 2-axle forestry machine lowboy trailer, type: STLT2Z for harvester transport – in progress! Color can be chosen freely!!!! Fifth wheel load: 18,000 kg Aggregate load: 24,000 kg (technical) Total weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis as a steel welded structure made of high-quality fine-grain steels Lashing eyes 130KN per side, 5 pieces Additional lashing eyes, 3 pairs on the upper bed Steel stake system, galvanized with aluminum sideboards (silver anodized) Steel front wall, approx. 400mm high Folding aluminum ramps with mechanical locking Central lubrication system SKF with reservoir (brake light-controlled) with approx. 20 lubrication points Dimensions: Overall length: 16,000 mm Bed length including rear area: 11,364 mm Fifth wheel height: 1330 mm Ground clearance in driving position: 184 mm Fifth wheel dimension: 600 mm R1 dimension from kingpin to the front: 410 mm (turning radius) R2 dimension: from kingpin to the frame: 2150 mm (turning radius) Further dimensions can be requested from us (technical drawing) Axles: 2x 12,000 kg (technical) Gigant with drum brake in conjunction with 8 pieces of 245/70 R17.5" brand-name tires on Alcoa Dura Bright rims Suspension: pneumatic with lifting and lowering function Second driving height + approx. 50 mm can be switched on from the cab. At a speed of 20 km/h, the vehicle lowers again. Including axle load gauge Coupling device: 2" kingpin (exchangeable, one position) WITHOUT fifth wheel supports! -> Customers use a wide square timber here, which is placed under the front frame. Braking system: Wabco EBS with axle load measuring device (Smartboard) incl. odometer Parking brake: spring-loaded accumulator Lighting system: Rear lights, 2 pairs (3-chamber light) Side marker lights LED Outline lights LED Position lights front and rear LED Reversing light and auxiliary light each in round design License plate light LED 1 piece rotating beacon, pluggable and can be switched from the cab via a separate switch Nedpfxoyr Izxs Aatewn Isbexvz Skjqvxmuwjhu 4 pieces LED work lights 4 pieces overwidth markers, double-secured (knob screw and pin) with LED lighting, red/white Steering: Tridec HF-E (hydraulic displacement steering on both axles) including automatic lane keeping and straight-ahead function. Remote control Tridec (radio remote control) can also be used in cable mode Painting: Complete steel structure blasted and primed with a special adhesion primer after welding. Subsequent 2-component paint in RAL color. Axles and wheel hubs are black or, for an extra charge, painted in RAL color. Other components are galvanized or painted / powder-coated or made of aluminum (with or without anodizing) Approval: including §13 certificate including §70 certificate (customer must provide a suitable and approved 3-axle semi-trailer tractor) including, among other things, a circular test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors and changes. Axle configuration...

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm working width, ideal for heavy-duty mulching tasks! The Brugger FMP 225 is a robust forestry mulcher designed for agricultural, forestry, and fallow land applications. Featuring a double belt drive, 36 tungsten-carbide-tipped hammers, and hydraulic equipment, it is ideally suited for tractors from 110 hp – reliable, powerful, and built for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 hp Weight: approx. 1,800 kg Mounting: Three-point linkage CAT II / III Italian CMR gearbox Njdpfowhyw Eex Aatewn Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 pieces, tungsten-carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for tailgate, 1x for pressure roller) Equipment: Hydraulic rear flap & pressure roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900 ----- Contact us for a tailored quote!

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Heavy-Duty Mulching! The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and on fallow land. Featuring a dual belt drive, 36 carbide-tipped blades, and hydraulic equipment, it is perfect for tractors from 110 HP upwards – reliable, high-performance, and ready for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Dual belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 HP Nwjdpewhyzwefx Aaton Weight: approx. 1,800 kg Hitch: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with blades) Blades: 36 pieces, carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-position adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for rear flap, 1x for roller) Features: Hydraulic rear flap & roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = 10,900 EUR Brugger FMP200 200cm – 32 hammers, 1,700kg = 11,900 EUR Brugger FMP225 225cm – 36 hammers, 1,800kg = 12,900 EUR ----- Contact us for a tailor-made offer!

Condition: new, High-performance forestry mulcher for excavators from 6 to 8 tons The BFM 80 was specifically developed for professional work in forestry, landscaping, and for clearing and maintenance operations. With its working width of 800 mm, the mulcher is ideal for shredding brush, shrubs, branches, and wood up to a diameter of approximately 200 mm. The large-sized rotor with 16 carbide tools, combined with the robust V-belt drive, ensures high shredding performance and smooth operation. Thanks to the reinforced steel construction, the BFM 80 is designed for daily use under demanding conditions and impresses with its long service life. Your advantages at a glance Suitable for excavators from 6 to 8 tons 800 mm working width for precise and efficient work 16 carbide mulching tools with high wear resistance Shreds branches, brush, and wood up to approximately 200 mm in diameter Robust V-belt drive for reliable power transmission Three adjustable working depths for different applications Stable and durable steel construction for professional continuous use Technical data Model - BFM 80 Working width - 800 mm Suitable for excavators - 6–8 t Max. material diameter - approx. 200 mm Working depth - -70 mm / -30 mm / +10 mm Number of working depths - 3 positions Hydraulic connections - 1× supply, 1× return, 1× leak oil line Required hydraulic oil flow - 38–80 l/min Max. operating pressure - 250 bar Drive - V-belt Rotor shaft diameter - 219 mm Rotor diameter incl. tools - 465 mm Housing thickness - 8 mm Nwedpfozqzq Njx Aaten Side wall thickness - 12 mm Tools - 16 carbide mulching blades Weight - approx. 450 kg

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK Nwedjud Urropfx Aaten -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Condition: ready for operation (used), Siemens 6FC5210-0DA00-1AA1 MMC 100.2 SN: ST-MD2007975, professionally fully overhauled and tested with 24 months warranty, 100% functional, scope of delivery as shown in the photos. Agreed sales discounts do not apply to this item. Please inquire for price separately! Nwsdex Eurljpfx Aaten

Condition: ready for operation (used), Siemens 6FC5203-0AB10-0AA1 flat operator panel SN ST-MO2016199, professionally fully checked and tested, good condition, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Nwedpfx Aaspnppbeton

Year of construction: 1986, condition: used, max. travel Y-arrester: 0-762 mm; max. travel X-arrester: 0-2000 mm; max. cutting pressure: 250kN (25t); max. plate thickness: 10 mm; max. punching diameter: 105 mm; max. stroke length: 0-25 mm; supporting table LxB: 4200x900 mm; total weight: 4100kg; electr. total connected load: 5,9 KW; dimensions: L=4200 W=1695 H=1660 mm; diverse accessories Nsdpfsbn U Tljx Aatjwn

Condition: new, Year of construction: 2025, Piston pump module for VFFS or HFFS machines for dosing liquids and paste-like products. Suitable for various viscous substances (e.g. lotions, creams, ointments) and liquids (milk, juices, water, etc.). Controlled by servo motor, including storage hopper and stirrer. - Specifications: dosing range: 100-1000ml; accuracy: +/- 0,5-1%; speed: 45 cycles/minute at 70ml dosing volume; hopper capacity: 70L; power supply and consumption: 3-phase, 380V, 1,5kW; dimensions and weight: depending on final layout. Nedjv Nmxgspfx Aatown Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Adast Maxima MS 58S Guillotine The machine is fully operational, in excellent technical and visual condition. It has just been serviced. The set includes a spare knife, cutting stick, paper stacker, and tools. Nwsdpfx Aaez Rk Naston Technical specifications: Working width: 580mm Stack height: 85mm Power supply: 380V Weight: 450kg All key components are made of cast iron, including a flywheel and adjustable pressure force – this is a professional production guillotine in a compact design. Electronic approach controller, cutting line, and safety guards.

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt Nwjdpfxjz Slxmo Aatjn The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Year of construction: 1999, condition: ready for operation (used), Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement. Nwjdpfx Aajy Ull Uoten

Year of construction: 2007, condition: used, Cylindroconical fermentation tank with two jacket cooling zones and one cone cooling zone. Additional title: vertical coolable stainless steel tank Capacity: 9200 l Njdpfxjy N Edye Aatewn Max. overpressure: 1 bar Temperature range: 50 °C Length: 2000 mm Height: 4713 mm Material: stainless steel 1.4571, 1.4404, 1.4301 Position: standing on 3 feet Features: 2 jacket cooling zone, 1 cone cooling, Ladder bracket

Condition: good (used), functionality: fully functional, total length: 4,570 mm, total width: 3,820 mm, total height: 2,300 mm, number of shelf rows: 13, product height (max.): 70 mm, Specifications: Overall dimensions (HxWxD): 457 × 382 × 230 cm Cabinet front dimensions (HxW): 328 × 210 cm Number of drawers: 13 Drawer dimensions: 328 × 210 × 7 cm (HxW×drawer height) -Robust steel construction, suitable for intensive industrial use This cabinet offers extensive storage capacity and, with its spacious drawers, is ideally suited for workshops, production environments, or warehouses where organization and accessibility are important. -Due to its large dimensions and solid construction, transport requires extra planning and appropriate equipment (e.g., forklift/load handling equipment). Nwsdpfxox Izkyo Aatjn