Used Submersible Pump for sale (8,676)

Condition: ready for operation (used), Year of construction: 2021, Nordson Hot Melt Glue Pump Type: MESA 6 Year 2021 Power 200/240 V 50/60 Hz, 15/18 A Dimensions: 750 mm x 350 mm x 570 mm. Kjdpfx Asy R Ecrjc Esdr

Condition: new, For sale is a new industrial submersible coolant pump from Speck, model T-602-170.0024, with a three-phase electric motor. The pump is from 2023. The condition of the unit and the scope of delivery are shown in the pictures. Technical data of the pump: Manufacturer: Speck Model: T-602-170.0024 ID: 56819 Serial number: 1002695075 Maximum flow rate: 60 l/min Maximum head: 58 m Kdodpfx Aezvln Aec Esr Pump speed: 2800 rpm Year of manufacture: 10/2023 Technical data of the motor at 50 Hz: Power: 1.0 kW Voltage: 400 V (star) / 230 V (delta) Current: 2.3 / 3.9 A Speed: 2850 rpm Power factor cos φ: 0.78 Efficiency class: IE3 Rated efficiency: 82.3% Other data: Three-phase motor Degree of protection: IP54 Insulation class: F (155°C) Mechanical size: BG71 Mounting position: IM V8 Standard: IEC/EN 60034 Motor number: 1800.1192 The pump being sold and its condition are as shown in the pictures.

Condition: new, For sale: a new, unused submersible pump for coolants, brand Speck, model TM-401-110.0005. The pump is designed for cooling systems, machine tools, and other industrial applications. Technical data: Manufacturer: Speck Kdjdezvh Aiepfx Ac Ejr Model: TM-401-110.0005 ID number: 34206 Serial number: 1002283768 Year of manufacture: 10/2021 Power: 0.5 kW Maximum flow rate: 40 l/min Maximum head: 38 m Power supply: three-phase Frequency: 50 Hz Voltage 380 V: 1.35 A, 2820 rpm, cos φ 0.73 Voltage 415 V: 1.55 A, 2850 rpm, cos φ 0.61 Protection rating: IP54 Insulation class: F (155)

Condition: used, power capacity / kW volt / V Kodjy S D Sujpfx Ac Eodr ampere / A GRUNDFOS MG 90LC2-24FT115-D submersible pump, centrifugal pump The parts were dismantled from functioning systems up until their decommissioning or originate from a liquidation of stock.

Condition: good (used), Busch Vacuum Pump Model 630 Kdodpfx Aswa Nzqjc Esr 370 CFM

Condition: good (used), Busch Vacuum Pump Kdedpfx Ajwa Ra Ujc Ejr Model 400

Condition: good (used), Busch Vacuum Pump Type: 400-212 235 CFM Dimensions: 1300 mm x 800 mm x 1100 mm. Kodpfewa Ucgsx Ac Ejdr

Condition: good (used), Busch Vacuum Pump Model 400-212 Kdjdjwa Unpopfx Ac Eer

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump Kdjdpfx Acey Ti I Rj Ejr -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH2-90/7 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 2.5 m³/h -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min - Filter fineness approx. 3 μm nominal - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel Kdedozk Ek Tepfx Ac Esr 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar - Drive: 400V, 50Hz, IE3

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH4-40/4 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 4 m³/h -Max. delivery head: 36.9 m -Immersion depth: 200 mm Kdodpfxoy Tkazs Ac Eor -Dimensions: 230/180/H435 mm -Weight: 14.9 kg

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Axial Pump, hydraulic pump -Type: APVC-13 -Shaft: Ø 16 x 40 mm -Bolt circle: Ø 64 mm M6 Kdedeyzfh Aspfx Ac Esr -Dimensions: 245/200/H250 mm -Weight: 9.3 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter Kedpjwh Rp Ejfx Ac Ejdr - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Kdodozmgdaepfx Ac Esr Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a column drill press made by Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm Kdedpfx Aezvrt Ssc Eer • Year of manufacture: 1979 • With coolant pump • Condition: Used, functional The machine can be inspected and tested at any time! If interested, two identical machines are available! Shipping costs via freight carrier: approx. €190 Phone number: 01575 2236716 You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: new, Submersible slurry pump for drainage. Kjdpfezcpbzjx Ac Eodr

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Capacity: 3000 l/min -Pump length: 970 mm -Flange outer diameter: 245 mm -Flange inner diameter: 125 mm Kdjdpeb A Nycjfx Ac Ejr -Pump diameter: 210 mm -Weight: 180 kg

Condition: used, Nordson Problue 4 Hot Melt Pump Kodpfswq Sv Eox Ac Esdr Model Problue 4 Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: ready for operation (used), Sump pump, submersible pump, transfer pump, Brinkmann-Pumpen D-5980, used machine Kdjdpfx Acovgwqhs Eor Manufacturer: Brinkmann-Pumpen D-5980 Type: TC250/720 Overall dimensions: 1180 x 230 x 290 mm Electrical data: 400V; 11.5A; 5.5kW; 2900 RPM Weight: 35 kg Capacity: 250 liters/minute

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, used wet polishing machine from PERS, model Vibra-Line B 150 l, with buffer tank, in combination with PERS dryer Vibra-Dry A 200 l - both demo machines Technical data / Vibra-Line B 150 l: U-shaped work container with automatic discharge Capacity (gross): 150 l Usable volume (depending on workpiece geometry and material): 80 l Year of manufacture: 2024 Diameter, external: 1,170 mm Height: 860 mm Lining in the bowl: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) itself flows through the filter basket into the buffer tank, from which a submersible pump pumps the water back to the rotary vibrator. Dimensions of the buffer tank (L x W x H): 700 x 400 x 460 mm 1 submersible pump and 1 filter basket (630 µm) are included Technical data / Vibra-Dry A 200 l: Corn/grain dryer with automatic discharge - vibration dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Capacity, workpieces: up to 65 kg Capacity, corn: 25-35 kg Speed: 1400 rpm Heating effect: 6 x 1.5 kW Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal dimensions of the bowl: 240 mm Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Corn granule temperature: +30 to +50 degrees Digital temperature control Kdodpfsy A N U Ajx Ac Esr pneumatically controlled outlet valve For commissioning, 25 kg of corn kernels of type GM 16 or GM 20 must be used.

Condition: like new (used), Chemical pump, slurry pump, chemical industrial centrifugal pump, used machine with explosion-proof motor Manufacturer: CEMP International -type: Bredel HOSE Pumps SP/32 -inclusion size: 1210x670x840mm -stump size: DN50 -electrical data: 400V; 6.3A Kjdpfx Acjttvtvs Esdr

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Performance: 41.6 l/sec -Pump length: 1550 mm -Flange outer diameter: 250 mm -Flange inner diameter: 130 mm Kodpfxob A Nx Te Ac Eedr -Pump diameter: 175 mm -Weight: 235 kg

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l/min -Pressure output: 2.5 bar Kedeb A Nygspfx Ac Eedr -Pumping height approx. 25 m -Speed: 2900 rpm -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inner diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a pillar drilling machine from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-E • Speed: approx. 125 - 3,150 rpm • Spindle stroke: approx. 180 mm • Table size: approx. 520x400 mm • Year of manufacture: 1979 • Weight: approx. 360 kg • Coolant pump can be connected • Condition: Used, functional The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Kdedpfezvrmljx Ac Ejr Sale ex works 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l/min -Delivery head H: 25 m (2.5 bar) -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inner diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg Kdedpfxsb A Nyks Ac Ejr