Coolant submersible pump

VOGEL

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Sugino high pressure plunger pump Nodpfxjr A Dm Is Agzedf Type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Water pressure 600 bar Flow rate 43 L/min Weight 1100kg The set includes a set of gaskets and consumables for the pump

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) Nedpscuntzefx Agzsdf - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: used, Working length: 5.500mm Njdpo Dvlisfx Agzedf Sheet metal thickness: 13mm Technical characteristics: *3 ROLLS WORKING *TOP ROLL DIAMETER Φ-500 *SIDE ROLLS DIAMETER Φ-300 (EACH ONE) *HYDRAULIC HOLDERS LEFT-RIGHT *HYDRAULIC LIFTING TOWER *HYDRAULIC PREBENDING

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: welded steel construction 3 drive rollers horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Nsdsr Ddurspfx Agzodf Optional equipment: Technical data: shaft diameter: Ø100 mm roller diameter: Ø315 mm working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg

Condition: new, bore capacity in steel (diameter) 32 mm throat 200 mm bore stroke 70 mm 16 mm spindle taper MK3 spindle turning speed range 50 - 3000 U/min 220 mm 425 mm table surface area 700 x 210 mm max. distance between table and spindle-nose 470 mm total power requirement 1,5 kW weight of the machine ca. 230 Kg dimensions of the machine ca. 0,75 x 1,05 x 1,2 m Drilling and milling machine with Nodpfx Agjupxlbezjdf - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Ndedpfxegulr He Agzsf Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm Ndjdpfx Asg U Uv Rjgzsf 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Year of construction: 2025, MEBAbase: The must-have for doers. The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone. The portfolio ranges from small manual mitre saws to automatic straight-cutting machines and is therefore the basis for your workshop. The universally applicable MEBAbase 17G mitre bandsaw machine is ergonomically sophisticated and has an optimum price-performance ratio. Simple centralised operation. Technical data Cutting range 90° - 175 - 200x75 or 190x135mm 45° - 110 - 150x110mm 30° - 75 - 100x 70mm Cutting speed 35 - 80m/min Drive - band saw blade 2kW; 230V, 50Hz Saw blade tension electrically monitored Saw blade dimensions 2140 x 20 x 0.9mm Saw blade weight 143 KG Dimensions of the machine 1080 x 800 x 1750mm Basic equipment of the MEBAbase 17 G - Fast mitre adjustment from 90° - 45°, infinitely variable according to scale to 0.5° accuracy Ndodpfx Aodb Rwasgzof - Mitre pivot point is the intersection point between the saw blade and the material system, which is why there is no change in the length dimension when the angle is changed - Powerful 2000 W motor - Manual quick material clamping. - Complete coolant system - Saw blade tension electrically monitored - 1 saw blade on the machine 6/10 ZpZ - Saw blade drive with limit switch - Operating instructions and spare parts list (digital) - Paint finish anthracite (RAL 7016) Subject to technical modifications. The machine consists of two parts and must be assembled according to the assembly instructions. You will receive details of the exact delivery time in the order confirmation.

Condition: excellent (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 229404, overall weight: 50 kg, power: 2.8 kW (3.81 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 4 A, Purchased and installed. Found to be too strong so removed. It has been used a total of 10 minutes. 1250L/min 3 Phase Max head. 20m IP68 Nsdpfx Aorqgauogzsdf

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg Nodpfswncaisx Agzedf