Used Tap Cutting Machine for sale (67,084)

Condition: good (used), functionality: limited functionality, Year of construction: 2011, laser hours: 78,480 h, For sale is a TRUMPF TruLaser 5030 L16, including LiftMaster, in well-maintained and fully functional condition. The machine is being sold due to a plant upgrade and can be inspected during ongoing production. Technical data: Max. sheet metal size: 3,000 × 1,500 mm Laser source: CO₂ laser Ibodpfx Apozwf Ifs Doc Laser power: 5 kW Control system: Siemens Sinumerik Automation: LiftMaster Processable materials: Steel Stainless steel Aluminum The machine can be inspected and demonstrated in operation at any time by prior appointment. If you are interested or require further information, please do not hesitate to contact us. Note: All information is provided to the best of our knowledge and belief, but without warranty. The sale is made excluding any warranty or guarantee. Subject to prior sale. The machine must be dismantled. Please contact us if you are interested.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes. Ijdjzg D I Aepfx Ap Debc

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Ibjdozzyl Hepfx Ap Djc Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Ibsdpfsz Icz Ijx Ap Doc Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: ready for operation (used), Year of construction: 1999, We are offering this used Amada LASMAC LC-1212 A3 laser cutting machine, manufactured in 1999. Manufacturer: Amada Model: LASMAC LC-1212 A3 Year of manufacture: 1999 Condition: ready for use Iodpfez Rvg Djx Ap Djbc If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of manufacture: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLK outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (incl. automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and individual image transfer to the network (view of the first 2.5 m) Additional 10 m extension of the LLK between the laser and the machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine platform version (without steel structure) Connection to STOPA large storage systems (SKL or UL) Safety devices for storage connection incl. 2nd light barrier circuit Storage interface (without storage trolley) LiftMaster Compact (STOPA version) TRUMPF laser: Solid-state laser TruDisk 8001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single-cutting-head strategy Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming Ibodpfxezu Sqhs Ap Dec TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shutdown Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via the Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine cladding, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding all guarantees and warranties. Subject to prior sale. Machine can also be inspected.

Year of construction: 2016, condition: good (used), functionality: limited functionality, The machine has been disassembled. It was in working order before disassembly. I have a video recording from before the disassembly. Sold as is, with no warranty or guarantee. Ibodpjz Iw I Ajfx Ap Djc

Condition: refurbished (used), Year of construction: 2016, operating hours: 4,155 h, functionality: fully functional, repeat accuracy: 0.076 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 300 mm, type of input current: three-phase, input voltage: 415 V, sheet thickness aluminum (max.): 300 mm, input current: 50 A, year of last overhaul: 2026, total length: 4,575 mm, total width: 2,285 mm, product height (max.): 300 mm, input frequency: 50 Hz, Water Jet cutter, Ward Jet Emerald E1530 1500mm x 3000mm cutting bed Hypertherm HP 30 High pressure pump Iodpez Ihduofx Ap Djbc Clemco Abrasive Hopper type 2452. 200 litres New grills and recent service XL Touch screen control system WR_XL , with aux screen Ward jet and Sigma nest Software Fully serviced and ready to work. 1000lts aux cooling water tank, circulation pump and heat exchanger Service toolkit and spare parts Cutting capacity - 300mm

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 Ibjdpfx Apex H T H Re Dec - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber 6001 G, laser hours: 1 h, laser power: 300,012,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 8,000 kg, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, overall weight: 8,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The JFY BFC+ is a new fiber laser cutting machine featuring a high-quality TRUMPF laser source. It enables fast, precise, and efficient cutting of various materials. Isdpfxsz Eq H Ho Ap Dsbc The machine combines a robust design with high beam quality, stable processes, and reliable performance in daily production. It is particularly suitable for companies in the sheet metal processing, steel, and mechanical engineering industries, as well as for the production of housings, industrial components, and ventilation elements. Key advantages of the machine: * Laser source power: various * TRUMPF laser source * Fiber laser technology * High cutting speed * Stable cut edge quality * Precise cutting head with autofocus * Robust machine design * Intuitive operation * Fast production preparation * Cutting of various materials possible * High repeatability accuracy of parts * Excellent price-performance ratio * Technical support and service in Poland Application areas: * Cutting of mild steel * Cutting of stainless steel * Cutting of aluminum * Cutting of structural elements * Manufacturing of housings and machine elements * Production of ventilation elements * Series and single-item production * Job-order cutting !!!Individual configuration of the machine is possible according to customer requirements, including table size, loading and unloading system, and additional equipment!!! We are happy to provide you with detailed offers, technical specifications, and delivery terms at any time.

Condition: good (used), Year of construction: 1985, functionality: fully functional, cutting width (max.): 920 mm, insertion depth: 920 mm, insertion height: 165 mm, overall weight: 3,200 kg, total width: 2,540 mm, total height: 1,650 mm, total length: 2,650 mm, Equipment: safety light barrier, Polar Mohr EMC 92 – Hydraulic Paper Guillotine Polar Mohr EMC 92 programmable hydraulic paper cutting machine, in good condition and ready for continued professional use. The machine has been well maintained and carefully operated and is in good working condition. The Polar EMC 92 is a robust and reliable paper guillotine, suitable for commercial printing and finishing applications. Machine Highlights Manufacturer: Polar Mohr Model: EMC 92 Machine type: Hydraulic paper guillotine Cutting width: approx. 920 mm Hydraulic clamp Programmable digital control Air table Optical cutting line Safety light barriers Side tables Good overall condition Well maintained Reliable and robust construction Iodpfx Ajz Hywdep Dobc Ready for continued professional production Inspection possible by appointment The Polar Mohr EMC 92 offers precise and efficient cutting and is a proven solution for professional print shops, bindery and finishing operations. Further technical specifications, photographs and additional information are available upon request.

Year of construction: 1995, condition: used, Foam cutting machine, as shown in the pictures. Stored in a warehouse – under a roof. Disassembled. Sold without any warranty or guarantee. If you have any questions, I can send more pictures and dimensions. Isdpfez Iy Dgex Ap Dobc

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system Isdpfjw A H T Asx Ap Dsbc One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. Ibodjz N Sgwepfx Ap Doc This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Mohr 66 ECO Polar Guillotine Year of manufacture: 2016. Machine ready for production, fully serviced, in like-new condition. Mohr Polar is the most recognized and highly regarded brand of paper guillotines worldwide. Made in Germany. Working width: 660 mm Stack height: 80 mm Isdpfx Asz S Uzpep Djbc Machine weight: 620 kg Power supply: 380 V Equipment: Programmer with a 5.5” display and the capacity to store 198 programs in memory Chrome-plated table Safety light barriers (photocells) Intuitive operation Documentation, tools, etc.

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Ibsdpfxszw Tzaj Ap Dsc Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Iodez Rl Taopfx Ap Dsbc Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: ready for operation (used), Year of construction: 2001, operating hours: 120 h, functionality: fully functional, machine/vehicle number: 638 TTR, film width: 1,100 mm, The Slitter Dusenberry is a slitting and rewinding machine manufactured by Dusenbery® Converting Systems. Ibjdpfxoz Rq Ebs Ap Dec

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum 30r/min Ibsdpfeww Upzex Ap Doc Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system Ibsdpfx Aey Au Aljp Dec • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: excellent (used), Year of construction: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and fast cutting of a wide range of materials, such as leather, textiles, foams, and plastics. It is particularly valued in the footwear, leather goods, and gasket/component manufacturing industries. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Main features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: Compact and ergonomic design ensures easy operation and space-saving installation in production facilities. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting. • Cutting head: Supports multiple tools, including oscillating knives and creasing tools, providing greater production flexibility. ⸻ Ibodpey D E R Nsfx Ap Doc 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used for: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information The 3010 model is especially recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to its ability to process large-format materials and support for various cutting tools, this plotter is suitable for both serial production and custom projects.

Condition: used, Year of construction: 2024, functionality: fully functional, This is a cutting machine manufactured by Scharfen, model ES 300, year of manufacture 2024. The machine has been inspected in our in-house workshop and is fully functional. This machine was an incorrect purchase; it turned out that a miter cutting machine was required. Therefore, it was only used for a short period. You will receive an invoice with VAT shown. The list price of the machine is €4,082 net / €4,857.58 gross. Our offer price is €2,932.77 net / €3,490 gross. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Inspected & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 580 x 635 x 420 mm Blade: 300 mm diameter, hollow ground, hard chrome-plated stainless steel, long cutting life. Cutting thickness setting: 0-25 mm (infinitely adjustable) Cutting length: 250 mm Cutting height: 210 mm Noise level: less than 70 dB (A) Grinding device removable Voltage: 400 V three-phase or 230 V single-phase Power: 0.6 kW Weight: approx. 51 kg Serial number: 2241096 Year of manufacture: 2024 Condition: used, inspected, fully functional Additional information: Large storage area for sheets Quick and easy to clean Extremely robust and low maintenance 100% stainless steel Ibedpfxsz Ilm To Ap Doc Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: like new (used), Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, sheet thickness aluminum (max.): 200 mm, pressure: 3,800 bar, product height (max.): 200 mm, Equipment: safety light barrier, Selling a waterjet cutting system, manufactured by Perndorfer, model WSS XL 3015, with 2 cutting heads and cutting angle compensation, as well as a drilling spindle for pre-drilling starting points. Complete with a high-pressure pump (Servo-Jet 4000; SJ 55), abrasive material feed system, and sludge removal system. The system is in like-new condition and has been exceptionally well maintained. Unlike standard models, the cutting table is made entirely of stainless steel. Includes a device for quickly cleaning/removing the water surface when cutting plastics (or similar materials). Includes 2 programming stations from Lantek for this machine. Ijdpsz Ikrhofx Ap Dobc Complete documentation is available. Available for immediate delivery. Please contact me if you have any questions.

Condition: good (used), Year of construction: 2014, functionality: fully functional, ▪ Core diam.outside: 70 – 174.6mm ▪ Core diam.inside: 60 - 150.7mm ▪ Core length (input): max 4780mm Iodoy N Stuopfx Ap Djbc ▪ Cutting length: 100 – 3000mm ▪ Design capacity: 300 cuts/h Complete core cutting installation, including loading rack, hopper table, core rack, core robot, chute, feeder, core cutter, lift table, transport trolleys and dust collection unit.

Condition: excellent (used), Year of construction: 2015, working width: 3,000 mm, total height: 1,000 mm, cutting height (max.): 10 mm, The ATOM FlashCut EASY 888 L30 plotter is an advanced digital knife cutting machine designed for precise and rapid cutting of a wide range of materials, including leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ 📐 Technical Specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Key Features • Versatility: The plotter enables cutting of various materials, from soft leathers to rigid plastics. • Ergonomics: Its compact and ergonomic design ensures ease of operation and space savings in the production facility. Iedpfxsy D Sa Ds Ap Debc • Vacuum system: The dual-zone vacuum system ensures stable material hold during the cutting process. • Cutting head: Supports various tools, including oscillating knives and crease tools, enhancing production flexibility. ⸻ 🏭 Industrial Applications The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising materials production ⸻ 🛠️ Additional Information The L30 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. With the ability to process large material formats and support multiple cutting tools, this plotter is suitable for both serial manufacturing and individual project tasks.