Used Paper Cutting Machine for sale (66,723)

Condition: excellent (used), Year of construction: 2014, Ref:11063 . 2014 Schneider Senator ‘S-Line’ 115H. Very low usage machine - only 320,000 cuts! Bedpfx Asypgt Uoftowi High speed 115 cm guillotine with; Central stainless steel air table with blower Stainless steel air tables left & right Micro-computer programme (up to 5,700 steps) TFT colour monitor with soft keypad plus external programmable memory card Programme correction for print variation (linear & %) Variable pressure hydraulic clamp via display Twin hydraulic bottom knife drive giving more powerful cutting and less wear Illuminated cutting area 2 high speed steel knives I.R. light beam guarding with ‘FFM’ (UK HSE spec) Central lubrication Auto knife change from the front of the machine Including tools & manuals. Specification: Cutting width, Max: 115 cm Feed depth, Max: 115 cm Clamp opening, Max: 17 cm Side table width, Max: 43.6 cm Smallest cut (auto) : 35 mm/ 1.38” (manual) : 25 mm/ 0.98”_ Power required : 7.5 kW Clamp pressure : 300 – 3,700 daN

Condition: good (used), Year of construction: 2016, Year of manufacture: 2016 (according to manufacturer's specification) Counter reading (sheet feeder): approx. 3.3 million. - 5 components - Barcode control - Ionization Special equipment: 9 laser sensors for processing Scodix material Technical data (information without guarantee) - Max. feed format: 762 x 530 mm - Min. trimmed finished format: 100 x 105 mm Bsdpfx Afoynf Tketewi - Feeder stack capacity: 800 mm - Max. delivery stack capacity: 254 mm

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Bodpfxeu Tg Spo Aftewi Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: good (used), Year of construction: 2001, Polar Mohr 115 E Year: 2001 Pile turner PW-4-ABV Elevator 10.4" TFT color display Programmable with memory Side air table Unloader Bwjdpfxexzb Agj Aftoi

Condition: good (used), Polar Mohr 78 ED Paper Guillotine Very low mileage, very good condition. The machine was purchased from a school workshop and has not been used in production. Technical specifications: Bwedjynfwiopfx Aftsi Cutting width: 780mm Stack height: 120mm Color LCD display Power supply: 400V Weight: 1400kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Bedpeymxp Ajfx Aftswi Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: good (used), Perfecta 132 TS Paper Cutting Guillotine The machine is in very good condition and ready for production. Bwjdpfx Ajymxm Ieftoi Manufactured in 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Perfecta premium cutting machines are manufactured in Bautzen, Germany. Perfecta Machine Features: – Interactive User Interface – 18.4” Touchscreen – USB Interface – CIP Data Module – Positioning via Electronic Handwheel – Programmable Holding Pressure – Automated Knife Change from the Front – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1320 mm Maximum Stack Height: 165 mm Infeed Depth: 1325 mm Minimum Cutting Capacity with Sheet Metal Under the Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under the Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Knife Capacity: 44 Cycles/Min Saddle Guidance: Over the Work Table Power Main motor: 4.5 kW Net weight: 3410 kg The machine includes a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Bwedpfx Afjymxmzetoi Power supply: 400V Equipment: – LCD programmer – photocells – air table – cutting line – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade

Condition: good (used), Neolt Electro Power Plus 145 Trimmer The device is fully functional and ready to use. Description: Ideal for trimming drawings, photos, posters, etc. Rotary hardened steel blade Transparent plastic pressure plate for precise cutting Sturdy base for creating a professional workstation Cutting length: 145 cm Bjdpfx Asymxmusftjwi

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Under a service contract until the very end. Technical Specifications: Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables Bjdpfxsymxmns Aftewi – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate – Tapping block – Spare knife

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Bwodpfx Afoymxmbotsi Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Bwsdpjymxl Refx Aftoi Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Robust 800 Roll-to-Sheet Slitter Machine in very good condition, ready for production. Slitting and cross-cutting machine, roll-fed. Sheeter Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc. Easy format setting, computer control. Manual and automatic operation. Technical specifications: Total power: 3.5 kW Working width: 800 mm Maximum roll diameter: 600 mm Maximum roll weight: 250 kg Feeding/cutting length controlled by computer Working speed adjustable via inverter Approximate dimensions (L x W x H): 1970 x 1310 x 1400 mm Weight: approx. 1100 kg Bodpfx Afeymxl Dotswi Includes a sheet outfeed table.

Condition: good (used), IDEAL EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: Bwedpeymxlkefx Aftei 99 programs, each with 99 steps Data entry via LCD touchscreen Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Switching mm/inch Hydraulic knife and pressure beam drive Photocells Side tables Cutting line Technical data: Cutting length: 550 mm Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm

Condition: used, Year of construction: 1998, machine/vehicle number: M-115H- 007-02/15-08, cutting width (max.): 1,150 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: safety light barrier, We offer this used Schneider Senator Schneider Senator 115H - TSC paper cutting machine - Guillotine, year of manufacture 1998. Manufacturer: Schneider Senator Bjdpfx Aoymy I Hsftewi Model: Schneider Senator 115H - TSC Year of manufacture: 1998 Condition: used Machine type: paper cutting machine - Guillotine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Bjdpjymmzysfx Aftowi Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: excellent (used), functionality: fully functional, IDEAL Stack Paper Cutter 5221-95 EP with automatic clamping and programmable backgauge control 520 mm cutting length Bjdpfoypfpbjx Aftowi 80 mm insert height 35 mm residual cut Electromechanical drive for blade and clamping bar. Electrically operated backgauge with EP control module. Digital measurement display, readings in cm/inch (accuracy to 0.1 mm). Direct input of measurements via numeric keypad. Memory key for repeat (chain) cuts. Programmable EP control for 99 programs, each with up to 99 steps (up to 9 dimensions can be saved as a single program step). Program steps can be recalled via Start button. Automatic set function for reference dimension. Programmable paper feed (EJECT). Electronic handwheel with infinitely variable speed for manual fine adjustment of the backgauge. Optical cutting line indicator. Clamping bar guided on both sides, can be operated independently from the blade. Precision backgauge spindle. Adjustable backgauge comb with fine pitch and plastic guides. Two side guides each on the front and rear table. High-quality blade made of premium knife steel. Full steel blade carrier and adjustable blade guides. Two additional side tables included. Comprehensive SCS safety package: Electronically controlled, swiveling safety guard on the front table; transparent safety cover on the rear table; main switch and safety lock with key; two-hand cut operation with repeat cut lock and simultaneous release control; 24-volt control system; patented IDEAL safety drive; automatic return of blade and clamp from any position; disc brake for instant blade stop; blade changing device with covered cutting edge; blade depth adjustment from outside; easy front blade change without removing housing parts. Power supply: 230 V / 50 Hz / 1~ Motor power (rated input): 1.1 kW. Dimensions: H 1260 x W 855 x D 1067 mm. Weight: 262 kg. The machine was under a maintenance contract. 2 side tables, spare blade, and 3 cutting sticks included. Shipping available. Please note: Our offers are for used machines, which may show signs of prior use (minor scratches or yellowing may occur).

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a Polar 92 X in excellent condition. This machine is a reliable industrial cutter designed for professional use in printing, finishing, and packaging/labeling environments. Ideal for precise cuts and efficient workflows. Highlights: - Robust Polar industrial quality (durable, precise, proven in production) - Clean and exact cuts, even with high volumes - User-friendly controls ("X" model) - Suitable for paper, cardboard, and similar materials Condition / Scope of delivery: Very good Machine as shown/offered Inspection and test run available by appointment Bodpex H Nb Rsfx Aftswi Optionally available as a package: On request, we can sell the Polar as a bundle including a pallet jack (ideal for handling paper stacks/pallets in production). The package price is accordingly higher – details and offer available upon request.

Condition: excellent (used), Cutting width: 92 cm Bwjdpfeypk Uiox Aftji Programs Color display

Condition: excellent (used), Year of construction: 2005, Polar 78 XT high-speed cutter - Year of manufacture: 2005 - Cutting width: 78 cm Bwedeyit Ncepfx Aftsi - with light barriers - with air table - Touchscreen color display

Condition: used, Year of construction: 2001, functionality: fully functional, cutting width (max.): 1,320 mm, input voltage: 400 V, Equipment: safety light barrier, For sale are 2 machines, being sold as a package. • Wohlenberg W132 guillotine cutter + jogging table. The pallet unloader has already been sold. Year of manufacture: 1979, equipped with cut-computer, 3 blades included. • Wohlenberg W92 guillotine cutter + jogging table. 2 blades included, year of manufacture: 2002 Bedpfx Afexxr Rcjtewi Both machines must be dismantled and collected by 31/03/2026. - Condition: Used - good condition - see photos - This is a commercial sale and VAT will be shown separately on my invoices. - Price is net, plus 19% VAT. - The machines are still in use and available by arrangement. - Viewing appointments can be arranged at any time. - Sale without warranty or guarantee.

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: Bjdpfjydnw Djx Aftjwi 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Condition: used, Year of construction: 2010, functionality: fully functional, Used Kongsberg plotter from 2010 Work area: 1680 x 2190 mm Used in packaging development for sample creation. Handles E-flute up to BC-flute Regularly maintained Bedpfx Ajymb Aljftswi Last inspection by Kongsberg 02/25 – all in order Viewing and test jobs possible at any time.

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Bodpfx Afoyi Dcgotowi Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation Bwsdpfx Ajyi Dcajftsi The machine is equipped with all safety devices and guards, and meets CE standards.