Used Paper Cutting Machine for sale (67,026)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 245011011, cutting width (max.): 550 mm, Cutting machine EBA 550 Multicut, working width 55 cm, with light barriers, program control, rear table cover, year of manufacture 1996, in good condition, immediately available. Fodpfx Ajzkcgrem Ejgi

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Fgedpfxe Ahgrto Am Eoi Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: good (used), Year of construction: 2010, Unit for trimming printed products on three sides Fsdpev Sdggefx Am Esgi

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Fsdpfx Aszg D I Aom Eegi NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Fgjdpfxowwzudo Am Eei Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, operating hours: 27,693 h, laser power: 3,000 W, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,000 W Round tube diameter: min. 16 mm Round tube diameter: max. 225 mm Square tube dimensions: max. 160 × 160 mm Rectangular tube dimensions: max. 200 × 100 mm MACHINE DETAILS Fgsdps Air Hyjfx Am Eei Loading and unloading Loading length: 6,500 mm Unloading length: 6,500 mm Operating hours: 27,693 h EQUIPMENT Automatic rear loading Automatic unloading system Fiber laser technology Specialized software solutions

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Fgjdpsuc Sifsfx Am Eji Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Fsdpfxswwz Dls Am Eegi Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, Fgedpfezg D I Nox Am Eji - 1 x preparation table for external tool preparation - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Fodjzizkyspfx Am Ejgi Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 40,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: exchange table, fully protected exchange table, ultra-high power, dual platform Laser power: 12KW15KW, 20KW, 30KW, 40KW, 3KW.6KW Standard hardware: scrap car, fire brick, fully automatic butter filling, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, rear camera, internal camera, monitoring display, radiation-proof glass, top cover beam light curtain, partition dust removal Fgedpfx Amjwxam Io Eji Optional hardware: light-blocking rubber strip, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, top cover fan Optional functions: FDA configuration, CSA configuration, TUV configuration, conventional CE configuration

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Fgjdeww Upzepfx Am Eei Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum 30r/min Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 20,000 h, laser source model: ROFIN DC 020, laser power: 2,000 W, working length: 6,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Processing length: min. 3,200 mm Processing length: max. 6,500 mm Round tube diameter: min. 12 mm Round tube diameter: max. 120 mm Square tube dimensions: min. 12 × 12 mm Square tube dimensions: max. 100 × 100 mm Rectangular and oval tube dimensions: min. 10 × 12 mm Rectangular and oval tube dimensions: max. 120 × 70 mm Laser power: max. 2 kW Fgjdpfx Amo Air Idj Eji MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Unloading length: 4,500 mm Load capacity of the bundle loader: 4,000 kg Number of digitally controlled axes: 6 Laser source: ROFIN DC 020 Operating hours: 20,000 h EQUIPMENT Automatic bundle loading system Unloading system ROFIN DC 020 laser source Cooling unit (chiller) Extraction system LT120 Optical weld seam tracking system LT120 Integrated micro-dosing system

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Fgsdpfj Ah Dcgox Am Eei Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: used, functionality: fully functional, SAF Plasmatome 20 with Digisaf 100 control system. The machine is suitable for plasma cutting of sheet metal and is in used condition. The system is equipped with a CNC Digisaf 100 control system. Fgodpfe Ahw Duex Am Eoi Inspection and testing are possible by appointment. Sale as shown in the photos.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 65,000 h, controller manufacturer: Siemens, laser source manufacturer: TRUMPF, laser power: 3,200 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, type of cooling: water, TRUMPF TruLaser 3030 – 4 kW (L20) Technical data: Manufacturer: TRUMPF Type: TruLaser 3030 – 3.2 kW (L20) Year of manufacture: 2011 Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840 D Laser power: 3,200 watts Max. sheet thickness, structural steel: 20 mm Max. sheet thickness, stainless steel: 12 mm Max. sheet thickness, aluminum: 8 mm Operating hours: NC approximately 65,000 h (May 2026) Beam on approximately 34,500 h - Max. workpiece weight approx.: 900 kg - Max. simultaneous speed approx.: 140 m/min - Smallest programmable path dimension approx.: 0.01 mm - Positioning deviation: +/- 0.05 mm - Average positioning spread: +/- 0.03 mm - Footprint approx.: L 9,300 x W 4,600 x H 2,200 mm - Weight approx.: 12,000 kg Standard equipment: Machine features: - Enclosed machine frame with integrated laser unit - Motion unit for highly precise machining - Torque drive in combination with linear direct drives - Enclosed beam guidance - Cooling unit Fedj Ahfqaopfx Am Esgi - Automatic pallet changer - Longitudinal conveyor for small parts / scrap - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF laser: - CO2 laser TruFlow 3200 with low-maintenance turbo radial blower - High-frequency excitation - Laser control system TASC - Laser power control - Laser logbook function Cutting head: - Single-cutting head strategy - Laser cutting head with 250 mm lens - Universal cutting head quick-change system (UTI) with bus connection - LensLine - ControlLine: Height control and sheet edge detection Control system: - Ergonomic control panel with 17” touch color screen - Simple operation - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - MicroWeld - Production plan - Teleservice, diagnostic functions Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Light barriers - Multi-chamber extraction system and compact dust collection system - Machine enclosure with Makrolon panels

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Swift Cut (ESAB) Type: Pro 2500 Year of manufacture: 2023 Working area: 1,250 x 2,500 mm Fodpfxj Aivxko Am Ejgi 1 plasma torch with Hypertherm Powermax 125 power source Cutting thickness up to approx. 30 mm Water table - no filter system required Table weight (empty): approx. 1,000 kg Table footprint: 3,226 mm × 1,840 mm Automatic torch height control (Intelligent Torch Height Control - ITHC) Workpiece collision protection (Breakaway Head) and sheet alignment via software Compressed air requirements: Clean, dry air (ISO 8573-1 Class 1.2.2), 7.0–7.5 bar, approx. 300 l/min. Cutting software 101126

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 68H1124, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the item by 31/12/2025! Fodexyfhwjpfx Am Eegi

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 25,995 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: diode laser, laser source manufacturer: TRUMPF, laser hours: 14,600 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 100 m/min, workpiece weight (max.): 900 kg, input current: 42 A, type of cooling: water, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Special equipment: + LiftMaster Compact 1530 (Type AL34) with loading cart + 3001 on TruDisk 4001 + BrightLine fiber + Nozzle changer + Wireless Operation Point + Performance package for fusion cutting + High-speed cutting package + High-speed eco cutting package + Copper cutting package + Brass cutting package + Transverse conveyor with tilting hopper + Storage interface + LiftMaster Compact 1530 (Type AL34 with loading cart) + Auxiliary pallet operation with loading cart Fsdpfx Aj Ahhu Usm Esgi + Safety fence Optional, at an extra cost: 1. Assembly, commissioning, partial overhaul and training of up to 3 operators at the customer's site, with a functional guarantee upon acceptance. 2. Workshop overhaul of the machine with commissioning and acceptance according to manufacturer's specifications in our workshop. Assembly, commissioning of the machine, and training of up to 3 operators at the customer's site. Standard equipment: - Closed machine frame - Automatic pallet changer in the longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Machine cooling unit (water-air) - Integrated control cabinets with internal lighting - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - ControlLine: Height control and sheet edge detection Control system - Workshop programming (TruTops via network access) - Quick reproduction - Touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust collector - Machine enclosure with certified viewing window (right door) - Roof cover

Condition: like new (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 1872509, overall weight: 1,000 kg, We offer a well-maintained high-pressure water pump UHDE HP 19/15-S. Year of manufacture 2007. Condition is as new. Fodpj Ahw Erjfx Am Esgi

Condition: used, Year of construction: 2021, functionality: fully functional, sheet thickness (max.): 25 mm, working width: 1,500 mm, hose package length: 10,700 mm, working length: 3,000 mm, CNC Plasma Cutting System Swift-Cut Pro 3000 MK 5 – Complete Manufacturing Cell incl. Portal Crane & Hypertherm 105 SYNC Description For sale is a professional, fully functional, and immediately ready-to-use CNC plasma cutting system, type Swift-Cut Pro 3000 (MK 5). The system was acquired from the renowned specialist dealer Heidenbluth Schweißtechnik and set up as a well-thought-out, turnkey manufacturing cell. The machine is in operation, has few operating hours, and can be inspected and tested while powered on. Scope of Delivery & Technical Equipment • CNC Cutting Table: Swift-Cut Pro 3000 MK 5 with a working area of 1,500 mm x 3,000 mm. Equipped with a sectional extraction table, Soft-Sense height sensing, collision protection, and a robust steel frame with integrated forklift attachment. • Plasma Power Source: Hypertherm Powermax 105 SYNC (year of manufacture 04/2021) incl. CPC connection, voltage divider, and serial interface for precise cuts up to 25 mm sheet thickness. • Cutting Torch: Machine cutting torch Smart SYNC 180° (10.7 m). • Material Handling System (Portal Crane): Solid, custom-made steel crane frame including a heavy-duty trolley with chain hoist for ergonomic loading of large-format sheets. • Marking System: Integrated marking system PRO. • Exhaust & Compressed Air: Powerful exhaust fan set (radial fan with wall console) for long duct runs including approx. 20–25 m of flexible ducting. Integrated Camozzi compressed air maintenance unit and a water separator Dropout 600 A. • Control & Software: Industrial control console with touchscreen monitor, PC and LAN connection. Including full versions of SWIFT Wizard 3 (automatic nesting) and SWIFT Cam Wizard 3 (incl. 2nd license with dongle for an additional external workstation). • Accessories: Comprehensive set of wear parts (SYNC 45A to 105A, FineCut nozzles, electrodes and wear parts box). Sales and Delivery Conditions • Price: €28,500 (net) OBO (or best offer) • Location: Schleswig-Holstein • Availability: Immediately Fjde Ah Eu Eopfx Am Eogi • Delivery: The sale is intended for self-collection. Assistance with loading on-site is possible upon agreement using a forklift. Dismantling of the ceiling structure (crane) and the piping is carried out by the buyer after consultation.

Condition: used, Year of construction: 2023, Manufacturer: Plasmatreat GmbH, Steinhagen, Made in Germany Fgedpfx Ae Air S Eom Esi Type: PTU1212 Serial no.: 10715 Commission no.: 262904 Year of manufacture: CW 19/2023 Power supply: 3~ / 400 V / 230 V AC / N / PE, 50–60 Hz Imax / fuse: 12 A / 3 × 16 A Icw: 0.64 kA Marking: CE Equipment (as per photos and HMI) KUKA articulated robot for part handling within the cell. Plasma nozzle system PFW10PAD (designation as per HMI). PlasmaPlus® unit (HMI function “PPlus”) with vaporizer, gravimetric precursor dosing, MFC/GFC gas control for process and carrier gas, and precursor reservoir. Plasmatreat touch HMI on a support arm, with recipe management, set/actual and tolerance monitoring of all process parameters, emergency stop and control buttons. Fully enclosed safety housing with glazed doors, signal light, main switch, and extraction connection. Mobile control unit with push buttons. TBH extraction and filter unit, connected to the cell via a flexible hose. Please note: * Sold in the name and on behalf of BorgWarner Turbo Systems. * Location: Kirchheimbolanden, Germany * Not included: workpieces, work tables and part carriers, pedestal fan * The machine is currently not in production and has been stored.

Condition: like new (used), Year of construction: 2022, operating hours: 287 h, functionality: fully functional, type of input current: three-phase, total width: 265 mm, total length: 415 mm, input voltage: 400 V, input current: 25 A, feed length X-axis: 1,800 mm, feed length Y-axis: 3,000 mm, working width: 1,800 mm, total height: 142 mm, cutting width (max.): 1,800 mm, cutting height (max.): 300 mm, front table length: 2,000 mm, hole diameter: 2 mm, Orox Tailor T 300 Automatic Cutting Machine for Sale – Complete, Turnkey Solution We are offering for sale a 2022 Orox Tailor T 300 automatic cutting machine in excellent condition, featuring extremely low operating hours. The equipment was used in a family-owned business where its capacity significantly exceeded actual production requirements; therefore, it is being offered for sale. Fjdpjya Hhtsfx Am Esgi Key advantages of the system: • Complete, integrated cutting solution • High-value (~€10,000) professional software package • Built-in photo system for recording fabric lays • Exceptional support for processing patterned materials • Detection of material defects and precise marker alignment • Supports digitization of cutting patterns • Immediate production start possible without additional investment Package includes: • Orox Tailor T 300 automatic cutting machine • Grafis pattern and nesting optimization software • Integrated photo system • Dedicated computers • 2-meter preparation/cutting table • Compressor and full accessories kit Upon request, an independent technical inspection and assistance with transport and installation can be provided. Price: HUF 35,000,000 + VAT Serious enquiries only – please contact us for further information.

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 265020110084, Technical specifications available upon request. Fodjzd Hfxjpfx Am Eogi

Condition: good (used), Year of construction: 2022, functionality: fully functional, track width: 2,600 mm, total length: 6,000 mm, table length: 4,000 mm, sheet thickness (max.): 150 mm, Equipment: documentation/manual, Zinser flame cutting machine from 2022, in very good condition. Sold without fume extraction system/table. Plasma cutting unit may be sold at an additional cost, but is not currently included in the sale. Fgedpfxs Ahdrko Am Esi The machine is still in production and can be tested at any time; availability by arrangement. Equipment can be provided for dismantling and loading; price is ex works.