Used Toilet Paper Machine for sale (92,363)

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. Fpedpfsuyhf Hjx Afton User manual is available, have videos from the manufacturer only

Condition: used, The main line components and characteristics are the following: Perini rewinder, year 1993 2 unwind stands type4810 micro embossing calander model 470 C Deslcalander 4901, year 1993 rewinder 6881 tail sealer 560C core making machine 211 2 core unwind stands 4202/4203 coreloader 622 log accumulator 511 2 log saws 140 log loader 619 2 Trimmex 5101 diverter Pulsar REDS 4-2-4 IEO, year 2012 Pulsar single beam modularconveyor system, typeC075, year 2012 Fsdpfx Afjwkfrystepn primary packaging Casmatic CMW 42 EV, year 2001 1 bundling machine Wrapmatic BFA 25, year 1993

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 12-23, A fully automatic cutting machine for Tissue paper rolls. High precision servo control system - "Control Techniques" Cutting large rolls Diam. up to 280mm - in single channel. Cutting rolls in two channels - up to max. Dia. of 140mm Automatic lubricant spraying system and air cooling for the blade. The machine complies with CE Safety standards. Specifications: - Product cutting dia.(Max)– 280 mm - Cutting speed Max – 160 cuts/min (x 2 lines = 320 Toilet rolls/min) - Computerized controlled functions: * Product and trim length * Cutting speed * Sharpening frequency and advance * Blade lubrication frequency * Fault display * Counter (coded) Fpedpeup U Rasfx Aftsn * Inlet conveyor and hoper transferring logs automatically from the ewinder into the cutting channel. * Choice of program according to the various products. - Clamps – machine is supplied together with 4 rigid pneumatically operated clamps, according to customers products dia. - Blade dia. – 600 - 800 mm - Electric supply – 12 kw x 380 v - Air pressure – 1/4 hose 6 atm - Dimensions – 6.5 x 2,2 x 2.4 m - Weight – 3500 kg

Condition: refurbished (used), Year of construction: 2000, Have a Special Folder Completely Rebuilt with New Rollers & New Gears. Anybody interested please feel free to reach out. H&H Folder with the following Details: 8 Plates + 6Plates - Gremser Flatpile Feeder (Year:2012) - Mobile Feeder with height adjustment, 50X70. - First Unit: H&H M7.32 52/8. Working width: 52 (Year:1999) -Second Unit: H&H KL 112 45/6 1. Extended Delivery 2. Cutting Unit for 2-3 Up Production. (Year:1999) (Working Width: 42cm) 3. Stacker Fpodpfxewcln Es Aftsn VERY SPECIAL FOLDERS FOR A VERY SPECIAL PRICE

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm Fpedpou Ul Uxjfx Aften stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: good (used), Paper cutting guillotine Ideal 4860 The machine is 100% functional, after inspection in very good condition. This is the currently produced model, the latest model. Technical data: working width: 475mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 450mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen Fjdpfx Afowunk Hstjpn electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MF-2024, Equipment: USB port, Machine for the production of ecological cotton paper sheets. The machine consists of a Hollander beater, a press, and a sheet forming machine for sheet sizes ranging from 27 x 37 cm up to 56 x 76 cm with basis weights from 150 g/m2 to 300 g/m2. Option to apply watermarks to the sheets. Production capacity up to 120 sheets per hour. Fpjdpfoxfladox Afton

Condition: used, Year of construction: 2007, cutting machine 2007 width 115 cm with monitor touchscreen USB interfaces CIP3 + CIP4 compatible ethernet interface saddle positioning via joystick ergonomically arranged two-hand operation press beam stop function programmable pressing force automatic pressing safety light grid plexiglass protection on the rear table stainless steel table work surface air table side air table Fjdpfexlq H Nsx Aftspn in production available: immediately located: Germany

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 7361082, cutting width (max.): 780 mm, Equipment: safety light barrier, Polar 78ES Programmatic guillotine Max cutting width: 78cm Power back gauge Air bed FFM guarding system Knife change equipment 2 Spare blades Books and manual in English Fully safety certified Serial Number: 7361083 Age: 2002 Fodpfxjxmbqhj Aftspn Price: Euro 13,750

Condition: good (used), POLAR 115 EM Fpjdpoxg Dr Ujfx Afton

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: Fpodpfxou Tg Spo Aftsn 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: excellent (used), Year of construction: 2006, Ref:11009 . 2006 Schneider Senator 115H-CT 115cm guillotine in excellent condition Comprising: Stainless steel side tables left & right with air Fodsxcymtopfx Aftepn Stainless steel central air bed Colour display with graphic operator guidance Soft keypad programming with static back gauge Computer programme with 99 programmes, 999 cuts instructions Metric/Imperial measurement scale Motorised back gauge / fast and slow speed with micro-adjustment Variable pressure hydraulic clamp Optical cut-line indicator Overload protection circuit 10 beam light barrier with FFM guarding 2 knives Tools and manuals. Specification: Cutting width, Max: 115cm Clamp opening, Max: 170 cm Feed depth, Max: 115cm

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fedpexk U Emofx Aftepn Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: used, Stack cutter, guillotine cutter, Schneider Senator 155 Rubber, paper, and veneer shears, plastic shears, textile shears Rubber, paper, and veneer shears Machine No. 60178 Year of manufacture: 1968 Fpedpfsdzqnyox Aften Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge max.: 1550 mm Blade drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for cutting stroke activation - Automatic clamping: presser holds the paper stack on the table - Manual clamp and stroke activation via foot switch (operational) - Back gauge adjustable up to 1550 mm (manual handwheel adjustment) - Retrofitted electrical control unit not functional, without wiring diagrams or operator’s manual - Back gauge adjustment via servo motor (motor, controller, and control unit included, not functional) - Without light barriers (pictured light barriers are no longer present) Required space (L x W x H): 300 x 270 x 165 cm Weight: 5100 kg Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate under the machine in the warehouse.

Condition: good (used), functionality: fully functional, Ideal 5221-95 EC cutting machine in good working condition. The front safety plastic cover is missing. Cutting width: 520 mm Stack height: 80 mm EP programmer with the function to save individual steps in programs. Side tables 2 spare blades (1x sharpened, 1x used) Machine can be shipped by freight forwarder upon arrangement. #8328 Fpsdpfjv Rlwdox Aftjn

Condition: used, Year of construction: 2020, operating hours: 6,000 h, Digital Plotter Cutting System, Manufacturer: Zünd - Switzerland Year of manufacture: 2020, original purchase price verifiably over €80,000 net! Model: G3 M-1600 The machine is fully functional and available for inspection and demonstration at any time. Machine location: Bayreuth ____ Please find below some details from the 2020 order: Working area: Width: 1330 mm, Length: 1600 mm Triple module carrier, laser pointer, adjustable vacuum area Integrated Tool Initialization (ITI) for modules 2 and 3, right side User manual in German included 3-phase 400 V (323 V – 457 V) 50 Hz CEE32 External compressed air supply required Fpjdpfsxlzyyjx Aftjn Material clearance: 60 mm With appropriate tooling, materials up to 50 mm thick can be cut Workstation Bracket for two modules and three tools, including storage space Monitor mount, compartment for PC. Max. PC dimensions: Width 200 mm, Height 480 mm, Length 470 mm, with compact keyboard (USB + PS/2 ports) Vacuum turbine 1–9 kW 3ph 400 V (50/60 Hz) Automatically regulated vacuum for material fixation, energy-efficient Extension kit for 1–9 kW / 1–15 kW vacuum turbine Enables placement of vacuum turbine up to 5 m from the cutter. Includes bracket for vertical silencer placement Universal Module UM-ZS* For use with various cutting and drawing tools Cutting mat PLP (anthracite) S3/G3 M-1600 Thickness: 2.5 mm, Width: 1410 mm, Length: 1984 mm, 2-piece Cutting tool UCT Universal Cutting Tool, including spring-mounted glide shoe and 2 blade holders types 1 & 3 Blade set for UCT/SCT cutting tool 14 blades: 4 x Z10, 10 x Type 6 Zünd Cut Center Software Suite V3.x For intuitive and simple operation of a Zünd Digital Cutter. Includes Cut Server, Cut Manager, Cut Editor for a single PC. Cut Queue For automated workflow and reporting, including unlimited number of hotfolders Camera option For edge detection, “best fit”, “fit to object” and “fit to job” compensation Integrated compact color camera ICC Ensures perfect detection of almost all registration marks, even with low color contrast, poor lighting conditions, and when processing reflective materials. Includes 3 sockets for connecting powered tools Frame grabber card For controlling the ICC camera via Zünd Cut Center Software _____ All information is without obligation; errors excepted. Used machines are exclusively sold to commercial buyers and without warranty.

Condition: good (used), Year of construction: 1998, 4 spindle paper drilling machine Dürselen PB 04 year 1998 Machine works perfectly complete with instructions, spare parts list, drills and tools - Drill hole diameter 3 - 15 mm - drill distance between the drill heads 31.7 - 293 mm - max. drilling distance over sliding table 420 mm - min. drilling distance above sliding table 1 mm - Insertion depth behind the drills 65 mm - Sliding table width 450 mm - Sliding table size in front of the drills 300 mm - Max. stacking height 50 mm The sliding table can be "programmed" for individual drilling Fodpfx Afsuiy Snstjpn can be "programmed" for individual drilling patterns. Dimensions W 77 cm x D 76 cm x H 135 cm Power connection 380 V Weight 275 kg

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, EM electronic digital display two hand safety cutting Fsdpjxk Tpdjfx Aftopn back table guarding optical cutting line indication air table slot cover at back table side tables (2) -cast iron 2 knives, documentation, el. diagrams, tooling Installation Dims W180 x D175 cm / 1.050kg Pack-Dims W200 x D200 x H160 cm / 1250kg

Condition: good (used), Wohlenberg 115 MCS-2 Paper Cutting Guillotine Machine in perfect condition, ready for production. Description: – Programmable controller with step memory – Optimized cutting cycle – Continuously adjustable clamping pressure – Quick knife change – One-piece machine body = increased stability Fedpoxgbf Sefx Aftjpn Technical data: Cutting length: 1150 mm Maximum stack height: 165 mm Infeed depth: 1150 mm Minimum cutting width with sheet metal under the pressure beam: 97 mm Minimum cutting width without sheet metal under the pressure beam: 30 mm Net weight: 3100 kg

Condition: good (used), For sale Wohlenberg size 115 cm type MCS-2-TV. This machine works 100% with all standard accessories. Comes from the first owner and is very well maintained. The machine has been professionally disassembled and is placed on a sturdy pallet. Of course you are welcome to test this machine with us. We can arrange the transport/packaging for you and load it into a truck or container. Ask for a price including transport (location the Netherlands). Fodpfjtyylljx Aftopn Regards Henk Hoos.

Condition: good (used), Polar Mohr 115 XT Paper Cutting Guillotine This machine is in very good condition, ready for production, after a service inspection. Low mileage. Year of manufacture: 2010. This is the most valued guillotine brand, a flagship product. A jogging and elevator are available for retrofitting. Fpjdpsxgbdzjfx Aftsn Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with a 15″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), Bookbinding Shears 1100mm Made in Germany. Very good condition. Cutting length approx. 1100mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Fedpoxgbdbefx Aftjpn Front cutting stop with millimeter scale. Foot-operated material pressure. Extra-high knives. Weighs over 400kg

Condition: good (used), Polar Mohr 56 ECO Guillotine Manufactured in 2013. The machine is ready for production, after a service. Fpodpfx Afexgbcksten Mohr Polar is the most recognizable and highly valued brand of bookbinding guillotines in the world. Made in Germany. Working width: 560mm Stack height: 80mm Machine weight: 575kg Power supply: 230V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Photocells Intuitive operation Documentation, tools, spare knife, and cutting sticks.

Condition: good (used), Polar Mohr 92XT Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. This is the most highly regarded guillotine brand, a flagship product. Manufactured in 2009. Technical specifications: Cutting width: 920mm Stack height: 130mm Fsdpjxgbcdofx Aftjpn Programmer with 15″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Weight: 2000kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), Polar Mohr 115 EMC Paper Cutting Guillotine The machine is fully operational. Inspected and ready to use. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer Air table Photocells Side tables Additional rear table guards Weight: 3200kg 380V power supply Tool kit, safety knife change tool, tapping block, spare knife, and one in the machine. Fpedexgbbmopfx Aften