Used Flood Lighting Poles for sale (18,616)

Condition: new, mileage: 16 km, power: 427 kW (580.56 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, S-WAY AS440S58 T/FPADR 04406 ELECTRIC ROOF HATCH 01520 STANDARD BLACK GRILLE 73203 STANDARD STICKERS FRONT DOOR PILLAR ONLY 02198 FRONT PARABOLIC SPRING 07279 PLASTIC FRONT BUMPER 00874 AS MY HIGH ROOF CAB 01626 LOGOs STD LIGHT GREY 72579 2 KEYS WITH IMMOBILIZER 14987 WITH WVTA CERTIFICATE OF CONFORMITY 01738 INSTRUMENT CLUSTER 10 INCHES 02104 DUAL-LINE TRACTION/TRAILER AIR COUPLING - ISO 06139 STANDARD FIFTH WHEEL COUPLING 02085 TRAILER/SEMI-TRAILER SOCKET 15 POLE ISO 08380 REAR OVERHANG 1047.5 MM 02104 DUAL-LINE TRACTION/TRAILER AIR COUPLING - ISO 06139 STANDARD FIFTH WHEEL COUPLING 02085 TRAILER/SEMI-TRAILER SOCKET 15 POLE ISO 08380 REAR OVERHANG 1047.5 MM 08329 STANDARD GEAR SHIFT MODE 08289 TOLL COLLECTION SYSTEM PREPARATION 00278 CONNECTIVITY BOX AREA 1 77985 ENGINE IDLE CUT OFF 00868 STANDARD SETTING CURSOR 13 02647 AERODYNAMIC KIT 02475 TPMS WITH SENSOR INTEGRATED IN THE RIMS 14569 STANDARD DATA INTERFACE FLEET MANAGEMENT SYSTEM 77389 ECO-ROLL 78878 GPS-PREDICTIVE DRIVE 14522 ADAPTIVE CRUISE CONTROL - A.C.C. 07638 WITH REVERSING WARNING 78287 LANE DEPARTURE WARNING SYSTEM EU STANDARD 02221 ADVANCED DRIVER DISTRACTION WARNING 02211 WARNING TRIANGLE NO. 1 00671 STANDARD CATWALK 14861 HILL HOLDER 07888 ESP (ELECTRONIC STABILITY PROGRAM) 00407 REVERSING SYSTEM 00404 BLIND SPOT ON PASSENGER SIDE ONLY 00409 INTELLIGENT SPEED ASSIST 00880 NO HIGH WAY ASSIST 02548 SIDE MARKER LIGHTS 00402 STARTING INFORMATION SYSTEM 78484 AEBS COMPLIANT 00414 ALCOHOL INTERLOCK INTERFACE 76960 ENGINE PLATE 01043 ENGINE SPEED 1650 RPM 78514 STANDARD REVERSE GEAR 05313 EURO VI E CALIBRATION 73131 DRIVE TIRE 315/70R22.5 06356 SPEED LIMITER 90 KM/H - ELECTRONIC 07356 LOAD 8000-13000 78031 630CC CLUTCH COMPRESSOR 78032 120A SMART ALTERNATOR 08552 PNEUMATIC FRONT SUSPENSION 01242 STANDARD CHASSIS 08620 BATTERIES LOCATED ON REAR OVERHANG 76048 STANDARD PROTECTIVE TREATMENT 00219 TWO FOOTRESTS 01669 SINGLE REDUCTION SOLO LIGHT 17X 06439 UNIFIED AIR TANK PLATE Lrjdoz Ednkepfx Afuot 02358 REAR SHOCK ABSORBERS 06434 TEMPERATE ZONE EQUIPMENT 06433 STANDARD EQUIPMENT 08294 CHASSIS WITH GRAY IC 444 (RAL 7021) PAINTED COMPONENTS 00127 STANDARD STEERING CIRCUIT 06467 STANDARD GCW 07700 JACK 73073 BATTERY CHARGE PIN 00073 FRONT STABILIZER BAR 03181 LOW-POSITIONED EXHAUST PIPE 08071 ENGINE AIR FILTER UNDER CABIN 06113 STANDARD REAR PNEUMATIC SUSPENSION 08378 DEVICE AND PROVISION FOR DUAL CHASSIS HEIGHT WITH PNEUMATIC SUSPENSIONS 00829 12TX 2860 TD GEARBOX 02326 PLASTIC PARTS IN VISIBLE COLOR CAB PASTELL 02759 CABIN PNEUMATIC SUSPENSION 02714 HEATED AND ELECTRICALLY ADJUSTABLE REARVIEW MIRRORS 02758 POWER-ASSISTED CAB TILT 00632 EXTERNAL SUN VISOR 79585 ROOF INSULATION FOR SUB-ARCTIC CLIMATES 00823 DIGITAL TACHOGRAPH DTCO 4.1 ADR 02443 STEERING WHEEL WITH LEATHER COVER 78563 PNEUMATIC HORN - CHASSIS 05629 ROLLER BLIND SUNSHADES ON DOORS 02917 HIGH COMFORT DRIVER SEAT IN LEATHER, SEAT BELT ADJUSTMENT, ADDITIONAL RECLINING ADJUSTMENT, CLIMATE AND VENTILATION CONTROL, RECLINING ADJUSTMENT 72264 1-PIECE HARD LOWER BED WITH PROTECTION 01765 CHROME FINISHING 08117 SWIVEL PASSENGER SEAT LUXURY UPHOLSTERY, PNEUMATIC SUSPENSION, 3 DEGREES OF FREEDOM, EXTENDABLE AND HEATED CUSHION, HEADREST, LUMBAR SUPPORT ADJUSTMENT 07830 FIFTH WHEEL H 150MM +

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Lrodpfxozzrmpe Afuet Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 150 watts Lsdpfod N Ddpjx Afuort -Number: 13x lights available -Price: per piece -Dimensions: 390/320/H310 mm -Weight: 7.1 kg/piece

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 750 mm, Hartford Pro 1000 – Vertical Machining Center (2006) For sale: A well-maintained Hartford Pro 1000 vertical machining center from 2006. The machine has seen only light production use and has been serviced on a regular basis. Ideal for precision machining, prototyping, and small to medium batch production. Technical Specifications Year of manufacture: 2006 X-axis travel: 1,000 mm Y-axis travel: 600 mm Hpebsx Dx Hnomt Dty Aea Z-axis travel: 630 mm Table size: 1,200 × 600 mm Spindle speed: 8,000 rpm (BT40 taper) Tool changer: 24 stations CNC control: FANUC HARTROL AI300 Spindle motor power: approx. 11–15 kW Lredpjx Dx Hnjfx Afuet Machine weight: approx. 6,000–6,500 kg Cooling system: Flood coolant, through-spindle coolant, coolant tank with pump Condition • All axes move smoothly without abnormal noise • Spindle operates properly with no overheating • Control electronics are fully functional • Regular maintenance performed; filters changed routinely • Machine available for trial machining Included Equipment • Optional BT40 toolholders (subject to separate agreement) • Chip conveyor • Coolant tank with pump • Work lights, full guarding, documentation/manuals Availability & Logistics The machine is available for immediate delivery and is ready for loading. Transport, loading, installation, and commissioning can be arranged within Finland or internationally. The listing was translated automatically. Translation errors are possible.

Condition: used, maximum load weight: 31,280 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2010, next inspection (TÜV): 12/2026, loading space length: 9,600 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, loading space volume: 50 m³, Year of construction: 2010, Equipment: ABS, Stock No. 5753 Approx. 50 m³ Kempf 2-sided tipper semi-trailer / discharge gate / auger / aluminum rims ----* Manufacturer: Kempf * Type: SK 38/3 - 2-sided tipper with discharge gate! * First registration: 06/2010 * Gross vehicle weight: 38,000 kg * Unladen weight according to vehicle registration document: 6,720 kg * Payload: 31,280 kg * Axles: 3 x BPW with 1st axle as a lift axle / drum brakes * Suspension: Air suspension with lifting and lowering * Tires: 385/65 R 22.5 approx. 50% on aluminum rims * Color: Chassis grey, body white, tarpaulin red * Volume: approx. 50 m³ (9.60 m long x 2.45 m wide x 2.10 m high) * TÜV (technical inspection): 12/2026 * EBS Knorr * Semi-trailer can be tipped to the left and rear * 3 x pivoting side walls on the left * Rear door can be swung and pivoted to the right * Grain slide in the center * Pivoting crossbar above the rear wall * Kempf discharge gate type 400 with auger with outlet on the right * Control box for lifting, lowering, and operating the discharge gate in the center on the right in the PVC box * Cover plate for the auger at the front on the front wall * Entry on the front left * Tarpaulin with central locking * Pivoting tarpaulin stops Ljdsz Em Tvjpfx Afujrt * Operating platform at the front with steps on the left and right * 3 crossbars * Folding ridge pole * Hose trough on the right * Quarter fenders for 1st and 3rd axles * LED rear lights * LED reversing lights * LED work lights * Sight glass at the rear right * Cyclone * Loading pressure gauge * Access ladder on the right * PVC toolbox in the center on the right * Support legs (full load support) * Cargo area lighting German semi-trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or information. We assume no liability for errors, changes or sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: new, empty load weight: 995 kg, Year of construction: 2025, Schmidt articulated snowplow PV 29-4 Year of manufacture: 2025 Condition: new Clearing width: 2895 mm at 32° / 2760 mm at 36° Weight with steel blade: 995 kg Equipment: - Combined blade 36 - Lifting device (raising/lowering/pivoting) - Adapter group for mounting plate size 5 - Hydraulic coupling ISO 16028 (S) (size 12 / BG3) - 2 sections - Sliding shoes made of steel - Side deflectors - Snow dust protection with scraper cover - Warning markings red/white - Warning flags - Plow lighting 24V, 7-pole, LED Ljdpfx Ajx Rx S Hefujrt Offer subject to change. Errors, modifications, and prior sale reserved. All information without guarantee. Our general terms and conditions apply. Location: Peter Meineke Becklinger Str. 17 29683 Bad Fallingbostel-Dorfmark Inspections and/or test drives only by prior appointment. Please coordinate by phone before arrival, as the vehicle/equipment may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: new, functionality: fully functional, machine/vehicle number: NEW-1, empty load weight: 685 kg, maximum load weight: 2,015 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 170 2700 2, Rear Tipper, Electric Operation + Integrated Aluminum Ramps NEW VEHICLE Internal dimensions: 276cm x 170cm Side panel height: 30cm Loading platform height: 65cm Total weight: 2700kg Payload: 2083kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axles with brake Ljdpfx Aezxtgrjfuort Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tension lock Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Electric tipping operation 12V 95Ah AGM battery Plug + socket for charging the battery Integrated aluminum ramps in ramp compartment, 2.8T load capacity Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pole plug LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber Large tipping angle of 48 degrees backwards OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE STARTING IN FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Integrated ramps 2800kg -Charger -Remote control -Bluetooth remote control -Emergency hand pump -Safety support for maintenance work on a tipped vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tension lock -Flat tarpaulin with or without bow -High tarpaulin 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle registration document €200 net. Images are for illustrative purposes and may show optional accessories at an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravan trailers.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. Lrodjzzpb Repfx Afuet - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: used, mileage: 52,000 km, power: 125 kW (169.95 HP), first registration: 01/1989, fuel type: diesel, overall weight: 11,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Year of construction: 1989, Manufacturer Mercedes Model 1117 4x2 Fire truck - Feuerwehr - Bomberos - Tankspritze Year 1989 Condition Good Serial Number WDB67601215364319 Ref. nr. 927725 Reg. date: Hk: 170 Km: 52.000 Gearbox: 4-speed automatic Diesel tank: 1 Tank liter: 150L Crew cabin: ? Cabin type: Crew cabin Drum brake: ? Lsdpevkz Irefx Afujrt Tire Size: 245/70R19.5 Cover% left 50% - 90% Front suspension: Springs Suspension rear: Springs Toolbox: ? Total weight: 11000 Kg Net weight: 7000 Kg Load capacity 4000 Kg Pump: Rosenbauer Pump timer: 834 Ladders: ? Light pole: ? Hose reel: R-Side + L-Side

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich panel construction Equipment: - Lashing rails - 6x lashing eyes - 30mm insulated wall Net price: €6,008.40 / Gross price: €7,150.00 Article number: TKC227351820.01 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 775 kg • Payload: 1,925 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design Lrjdeyivbzopfx Afuet • Floor made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel locking mechanism • Continuous interior height: approx. 200cm • Continuous interior width: approx. 184cm • 2x maneuvering handles at the front • Doors with special sealing profiles made of hard/soft plastic • Rear frame made of hot-dip galvanized steel, welded • 6 lashing points embedded in the floor (750 DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2016, operating hours: 9 h, Hybrid LED light tower Smart solar battery and diesel power system Lsdpfx Afowhmqreuert Brand: Verdegro Type: LLTT-H Year: 2016 Solar power system (350 W) High efficiency LED flood lights. Photocell daylight sensor (automatic/on/off) Spring-driven cable drum Optional: Geo fencing by DSE web interface 7 section vertical tower (steel galvanized) Forklift sprockets on top + below chassis Information LED backlight controller screen Hybrid diesel generator Fuel tank capacity 140 L Drip tray / spill container Four telescoping outriggers and leveling jacks Torsion rubber suspension axle

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Manual winch Equipment: Net: €5,621.85 / Gross: €6,690.00 Article number: BKT235281600.01 Technical data: • Brand: Blyss • Model: KTT 35 • Vehicle type: Cable drum trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 280 x 160 x 0 cm • External dimensions (L x W x H): 470 x 234 x 218 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Unladen weight: 711 kg Lrjdpfeyachijx Afust • Payload: 2,789 kg • Chassis: Low-loader (wheels beside the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable drums with a diameter of up to 2800 mm and a width of 1600 mm. • Standard tube holder approx. xx mm • Torsionally stiff chassis with a robust holder frame, hot-dip galvanized • Easy operation of the holder frame with or without a cable drum • Barrier-free insertion of the cable drum • Play-free storage and securing of the drum by fixing • Robust support wheel holder and rear support • Stable telescopic crank supports at the front and rear • Incl. Robust and maintenance-free manual winch • Very stable steel frame, welded • Frame completely hot-dip galvanized • Plastic mudguards • Reversing automatic • KNOTT inertia braking device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog lamp • Lighting recessed in the rear frame • License plate holder 340x200 mm _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask about special requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door/Ramp combination, Side door Features: - Aluminum walls - Ramp/Door combination - Aerodynamic Polybug Net price: €4,327.73 / Gross price: €5,150.00 Article number: C25213251215.01 Technical data: • Brand: Debon • Model: C255 V2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 251 x 125 x 156 cm • External dimensions (LxWxH): 370 x 172 x 205 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,300 kg • Unladen weight: 370 kg • Payload: 930 kg • Chassis: Low-loader (wheels next to the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted Lrjdpfx Aozy Airefust DESCRIPTION • Full aluminum body, anodized aluminum walls • Wooden floor made of Finnish multiplex with screen printing coating • Full poly roof and front • Aerodynamic roof and spoiler front shape through the use of polyester • Continuous interior height: approx. 146cm • Continuous interior width: approx. 126cm • Rear double door combination (tailgate + door in one) • Side rail system embedded in the floor with sliding eyelets for securing the load • Interior light • Torsionally rigid chassis • Stable cross members, allowing high point loads • Rubber spring axle from KNOTT • Reverse automatic • Knott inertia brake and parking brake • Stable V-drawbar • Plastic fenders • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Automatic support wheel • Body splash-proof. Special equipment included in the price: • Lockable side door on the front right, 102 x 61cm (HxB) _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask about any desired extras! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum cover, front-mounted, 3x side panel extensions Equipment: -V2A screws -Removable cover -Aluminum cover Net: €3,957.98 / Gross: €4,710.00 Article number: KU7D75301503.01 Technical data: • Brand: Koch-Anhänger • Model: U7 • Vehicle type: Covered trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 3 years from first registration • Internal dimensions (LxWxH): 300 x 150 x 95 cm • External dimensions (LxWxH): 409 x 204 x 162 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Tare weight: 379 kg • Payload: 371 kg • Chassis: Low-loader (wheels beside the body) • Tires: 185/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Side panel height 90 cm + cover height 5 cm • Double-walled, anodized aluminum side panels, 30 mm, with integrated aluminum frame Lrsdszy Dglopfx Afuet • Side panel with load securing system; accessories such as lashing eyes can be easily mounted without drilling. • Lashing bars made of stainless steel (V2A) • Stable floor made of screen-printed material, non-slip (birch wood, waterproof glued) • Very stable latches for the tailgate made of V2A stainless steel (unique) • Cover can be opened from the rear • 2 stable V2A stainless steel hinges at the front • Stable aluminum cover with aluminum tread plate, walkable • 8 mm V2A screws • Stable cover rail • Optional: crossbar set can be mounted on the rail • Stable V2A cover latch at the rear with disc lock • 2 gas struts for easy opening • Cover easily removable • Maintenance-free rubber spring axle, hot-dip galvanized • Suspension and drawbar from well-known manufacturer ALKO • Safety indicator on the coupling • Steel fenders • Tailgate very easily removable • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Standard equipment includes high-quality 1A brand tires • Large 185/70R13 tires, balanced and suitable for 100 km/h • All screws are M8 stainless steel (V2A) • Clear control panel with the most important data (tire pressure, cable layout...) • Including 10-year Koch guarantee _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about any specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, axle configuration: 2 axles, first registration: 03/2023, Equipment: ABS, Equipment: Sliding trailer 20 S * Dimensions and weights * External overall length approx. 7,055 mm * Overall width approx. 2,500 mm * Laden height approx. 1,150 mm * Roller track length approx. 6,890 mm * Wheelbase 5,240 mm * Unladen weight approx. 3,460 kg * Technically permissible total weight approx. 20,000 kg * Permissible total weight approx. 18,000 kg * Payload approx. 14,540 kg * Designed for containers with a length of 5,000 to 7,000 mm according to DIN 30722. * (Technical changes reserved.) * Chassis: * Chassis construction made of welded I-beams in QSTE steel * 4 container locking devices and upper sliding frame locking device, pneumatically operated * Side protection device according to RL 89/297/EWG, closed (position 2) * Bogie: * Bogie 980 FM including ball bearing turntable 90/1100/22 (low maintenance) * Drawbar: * Drawbar 2600/980/100/30, inclined drawbar pin * with height adjustment (coil spring with locking mechanism) * Drawbar with DIN drawbar pin, internal diameter D=40mm, external diameter D=110, thickness 30mm Lrjdpey Trycjfx Afuet * Axles: * 2 x 10 t axles for 19.5 disc brakes, ET 138, manufacturer at manufacturer's choice. * Disc brake diameter approx. 370mm, * Wheel fastening by center centering according to DIN 74 361 Part 3. * Braking system: * Air brake system according to EU directive with interlock-proof * Duomatik coupling head * Conventional air suspension system, * EBS Type 4S/3M, electronic braking system with ROLL Stability, * Double-diaphragm spring accumulator cylinder on the rear axle, * Release valve for separate release of the spring accumulator brake. * Lighting system: * Lighting system 24 Volt, full LED according to RL 76/756/EWG with multi-chamber lamp * (Hella) and license plate lights integrated into the light panel * 1 x 15-pole plug connection * 6 LED side marker reflector lights * 2 LED outline lights, white, at the front * 2 LED position lights at the rear, separately mounted * 1 reversing light (position 3) * Tires: * Regional traffic tires, tire manufacturer at manufacturer's choice * 8-ply 265/70R19.5 (7.5x19.5) * Steel wheels ET 138, wheel nuts unpainted * Underrun protection: * TÜV-tested underrun protection made of aluminum. * Two vertical delta-shaped impact protection profiles serve to protect the rear during * loading and unloading. * Accessories: * 4 plastic fenders, half-shells at the front and rear, single-wheel fenders * 4 anti-spray mud flaps * 1 lockable plastic toolbox * 1 chock with holder * 1 license plate holder * 1 A-sign for the transport of waste materials * 1 net box (position 4) * 2 container guides * 3 small EBB stickers (position 5) * Painting: * Chassis color: MB 7350 Novagrau * Upper sliding frame: MB 7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 silver * Contouring marking at the rear: red * Contouring marking on the side: white * SSE: RAL 7001 Silbergrau (position 6) * Rear panel/light panels: RAL 7001 Silbergrau (position 6) * Underrun protection: aluminum-anodized (silver) * Locking hooks, container guides: yellow * Documentation: * Included in the scope of delivery: * Commissioning and brake test report * Operating instructions * Maintenance instructions from axle manufacturer * Spare wheel holder removed All information without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: used, mileage: 252,000 km, first registration: 07/2023, fuel type: diesel, fuel: diesel, Year of construction: 2023, Mercedes-Benz Sprinter Pro 317 CDI Chassis *Former refrigerated vehicle!* • Engine: OM 654 DE 20 LA • Power: 125 kW / 170 hp • Emission standard: EURO 6e • HVO compatible • 9-speed automatic transmission (9G-Tronic) • ABS / ASR / ESP • Alternator 14V / 250 A • AGM battery 12V 70 Ah • Single-pole main battery switch • Jump-start contact • Terminal strip for electrical connection • Outside temperature display • Engine oil level display at cold start • 93-liter tank • Fuel filter with water separator • SCR emission control, generation 4 • Crosswind Assist • Traffic Sign Assist • Active Lane Keeping Assist • ATTENTION ASSIST • Communication module (LTE) for digital services • Mercedes-Benz emergency call system • Breakdown management • Thermal insulation glazing with band filter on windscreen • Rain sensor • WET WIPER SYSTEM • Electrically adjustable, heated, folding exterior mirrors • Semi-automatic climate control TEMPMATIC • Multifunction steering wheel • Height- and tilt-adjustable steering wheel • Vibration damper • Driver and passenger airbags Lrjdpfx Aeyut H Ssfujt • Driver’s seat: suspended comfort seat with lumbar support and armrest • Heated driver’s seat • Low driver’s seat box • Front passenger double seat • Seat belt warning for driver & passenger • Entry grab handles for driver & passenger • Rear bulkhead trim • DAB radio • Navigation system • USB socket 5V • Instrument panel charging package • Smartphone integration package • MBUX multimedia system • 1-DIN slot front, under headliner • Front cup holders • Combined instrument panel with color display • Speedometer in km/h • Central locking • Smoker package • Acoustic package • Electrical system for body builder conversion • LED High-Performance headlights • Fog lights with cornering function • Driving light assistant • Side marker lights • Outline lights • Rear lights, partially LED technology • Adaptive brake light • Extended rear light wiring harness • Trailer socket pre-installation • Pre-installation for 3rd brake light electrics • Pre-installation: programmable special module electrics • Pre-installation: switch panel • Pre-installation: Remote Service Plus • Pre-installation: Live Traffic Information • Pre-installation: bodybuilder’s blind spot assist • Pre-installation: reverse assist electrics • Front mud flaps • Longitudinal beam reinforcement • Rear towing eye • Minimum unladen weight: 2,381 kg • Additional base construction measures • Additional base construction measures 2 • Gross weight: 3,500 kg • Axle ratio: i=3.923 • Reinforced front axle load • HOLD function • Hill start assist • Stability control stage II • Wireless tire pressure monitoring, front and rear axles • Tire size: 235/65 R16C • Tire tread depth: 5/5 / 7/9 mm • Rims: steel 6.5 x 16 • Wheelbase: 3,660 mm • Frame length: 3,350 mm - 1st owner! - German vehicle! Errors and prior sale excepted!

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, manual winch Equipment: -Ramp angle 13° -14 tie-down points -Spare wheel Net: €7,546.22 / Gross: €8,980.00 Article number: IMO235542000.11 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 542 x 209 x 0 cm • External dimensions (LxWxH): 725 x 215 x 100 cm • Loading height of the floor: 66 cm • Permissible total weight: 3,500 kg • Unladen weight: 890 kg • Payload: 2,610 kg • Chassis: Low loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle Lrjdjygc Tlspfx Afujt • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Freely adjustable bracket for ALKO 901 manual winch • Incl. ALKO 901 manual winch with steel cable • Full aluminum floor, with anti-slip coating • 1 adjustable wheel ramp • Very stable, welded steel frame • Tilting loading platform by means of manual hydraulics + 2 lifting cylinders • Loading platform 474 cm + 68 cm ramp • Side panels color: black • Wheel stopper bar / tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members for high point loads • Additional longitudinal struts fully welded • 14 tie-down points within the loading platform, rubber-coated (750 kg/piece) • Spare wheel mounted under the loading platform • Reversing automatic • ALKO overrun device and parking brake • ALKO coupling head • Very stable V-drawbar, REINFORCED • 13-pole plug • Reversing lights • Large-sized safety lighting • Swiveling LED rear lights • Integrated rear fog light • Lighting swivels • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any additional features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Walkable fenders Lrjdpfjzy Aqvex Afujt - Tailgate ramp - Low loading platform Net: €5,168.07 / Gross: €6,150.00 Article number: VTS335481800.01 Technical data: • Brand: Vlemmix • Model: VTS • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 480 x 180 x 34 cm • External dimensions (LxWxH): 662 x 240 x 167 cm • Loading height of the floor: 35 cm • Permissible total weight: 3,500 kg • Unladen weight: 930 kg • Payload: 2,570 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: No DESCRIPTION • Continuous steel fenders, walkable • Very stable steel frame, welded • Water-resistant glued 18mm thick screen-printed floor • Loading platform height only approx. 35cm • Maintenance-free rubber spring axles from KNOTT • KNOTT drawbar coupling and parking brake • Reverse assist • Very low chassis for low approach angle • V-drawbar with support for the excavator bucket • Excavator bucket holder with lashing eyes • Stable steel side panels approx. 34cm high • Galvanized chassis • Torsionally rigid longitudinal beam chassis for safe driving characteristics • Solid loading ramp, approx. 132cm long, with gas spring support • Stable rear support integrated into the loading ramp (automatic support when the ramp is opened) • 12 lashing eyes on the side, with ring eyes • Lighting recessed in the rear frame • Outline lights at the front • Automatic support wheel with holder in the middle • 13-pole plug • Reversing light • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, beaver tail, ramp Equipment: - Loading ramp - Shovel holder - Steel side panels Net price: €5,168.07 / Gross price: €6,150.00 Article number: VB3235301610.02 Technical data: • Brand: Variant • Model: 3516 B3 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 300 x 162 x 23 cm • External dimensions (L x W x H): 482 x 208 x 150 cm • Loading height of the floor: 34 cm • Permissible total weight: 3,500 kg • Unladen weight: 631 kg • Payload: 2,869 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, walkable diamond-plate fenders • Lateral grid steps, non-slip • Screen-printed wood floor, 21 mm, non-slip and waterproof • Extremely stable, welded grid tube frame • Frame completely hot-dip galvanized • Steel loading ramp, vertical on shaft, 130 cm • Sturdy eccentric locking mechanisms Lsdpfxszy Anzj Afuert • Support blocks on the loading ramp • Very low chassis for a low loading angle • Beaver tail / low approach for aerial work platforms and excavators • Excavator bucket holder in the front • 8x lashing eyes mounted in the outer frame (1000dAN/kg) • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse drive automatic system • KNOTT inertia coupling and parking brake • Lockable coupling head • Spare wheel, mounted under the excavator bucket holder • Very stable, bolted V-drawbar, REINFORCED • 13-pole connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, H-frame, aluminum side extension 30cm Equipment: - 6 lashing points - H-frame at the front - Folding side panels Lrodpfx Afozy Awisujt Net: €4,235.29 / Gross: €5,040.00 Article number: PW1L20301510.21 Technical data: • Brand: Debon • Model: PW1.2 • Vehicle type: Rear tipper • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 306 x 155 x 60 cm • External dimensions (LxWxH): 436 x 167 x 132 cm • Loading height of the floor: 72 cm • Permissible total weight: 2,000 kg • Unladen weight: 660 kg • Payload: 1,340 kg • Chassis: High loader (wheels under the body) • Tires: 185/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • Side panels fold down on the side and rear • Side panels removable • Steel plate on wooden floor in Finnish quality • H-frame at the front, removable • Electric hydraulics with battery • Sturdy steel frame, welded • Frame completely hot-dip galvanized • Aluminum side extension, 30cm, 3-sided pivoting • Many stable cross members, allowing for high point loads • Maintenance-free rubber spring axles • Reversing automatic • Overrun device and parking brake • 6 lashing eyes inside on the side edge • Eccentric locks • Sturdy V-drawbar • 13-pole connector • Reversing light • Large dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Equipment: - 6 lashing points - Multiplex walls - 2-leaf rear door Net: €3,823.53 / Gross: €4,550.00 Article number: HKP113301518.01 Technical data: • Brand: Humbaur • Model: HK 133015-18P • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Interior dimensions (L x W x H): 304 x 151 x 180 cm • Exterior dimensions (L x W x H): 435 x 201 x 245 cm • Loading height of the floor: 59 cm • Permissible total weight: 1,300 kg • Unladen weight: 495 kg • Payload: 805 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/65R15 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multilayer wood, 15 mm thick, with UV-resistant plastic coating • Stable V-shaped drawbar, hot-dip galvanized • Longitudinal members continuous • 2-leaf door at the rear • Twist-lock closure and hinges galvanized • 1 maneuvering handle at the front • Lashing points in the frame profile, tensile force 400 kg per lashing point, Dekra tested • Reversing aid • ALKO overrun device and parking brake • Plastic fenders • Interior light fitted • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about your requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration including customs declaration possible Lodezy Dpmspfx Afujrt Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, mistakes and prior sale excepted -

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Parabolic suspension +100km/h, Lowered chassis, Composite floor Features: -Welded frame -8 lashing eyes -Edge for ramps Net: 5,000.00 € / Gross: 5,950.00 € Article number: AZH235402032.04 Technical data: • Brand: Hapert Trailers • Model: Azure H-2 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 405 x 200 x 30 cm • External dimensions (LxWxH): 561 x 206 x 94 cm • Loading height of the floor: 64 cm • Permissible total weight: 3,500 kg • Tare weight: 652 kg • Payload: 2,848 kg • Chassis: Flatbed (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100km/h approval: Yes DESCRIPTION • New side panel hinges incl. welded-on hooks for attaching a cargo net, among other things. • Aluminum side panels with robustly installed locks • Aluminum side panels anodized double-walled • all side panels can be folded down and removed • Steel corner posts removable Lrjdpfx Afezu N Iqouet • Attachment option at all 4 corners for tarpaulin frames, lattice extensions, side panel extensions or front wall extension • stable eccentric locks • Composite floor is an extensively tested, high-quality material made of several interconnected materials • The honeycomb structure consists of glass fibers and polypropylene-coated thermoplastic composite materials • This is a high-tech composite material made of long glass fibers in a matrix of polypropylene (PP). • Stable, lightweight and the avoidance of wood, making it sustainable and recyclable • Usage conditions, including impact and tensile strength, shear force, abrasion and resistance to weather conditions, have been extensively tested. • Reinforced, securely bolted V-drawbar • very stable steel frame welded • Frame completely hot-dip galvanized • many cross members, thus high point load • additional longitudinal struts continuously welded in • all cross and longitudinal members rest on the ground • 8 lashing eyes recessed inside in the side edge (1000DaN/kg) TÜV certified! • U-profile on the rear for easier positioning of the ramps • Cargo net hooks on hinge lower parts • Parabolic axle from KNOTT • Shock absorber for 100km/h mounted • Parabolic axle for absolute driving comfort! • Reverse automatic • KNOTT overrun device and parking brake • 13-pole plug • Reversing lights • large-sized safety lighting • integrated rear fog light • lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to inquire about any special requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - dealers and repair workshops for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Side flap, sandwich construction Equipment: - PVC flooring - 40 mm insulated wall - Supports Net: €6,092.44 / Gross: €7,250.00 Article number: FVK115302023.02 Technical data: • Brand: Other • Model: VK 15302023 • Vehicle type: Sales trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 297 x 196 x 230 cm • External dimensions (L x W x H): 452 x 205 x 294 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,500 kg • Unladen weight: 712 kg • Payload: 788 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Stable V-drawbar, hot-dip galvanized • Single-axle • Floor panel made of multiplex • Side walls made of very solid steel sheet sandwich, 40 mm thick • Sales flap on the right side with pocket storage • Gas door lockable • PVC covering on the floor • Door in the front wall, lockable from inside and outside • Step on the drawbar • Support wheel with clamping mechanism • 4x scissor supports mounted incl. crank • Maintenance-free rubber spring axles from KNOTT • Reverse assist • KNOTT overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light Lrodpfszy Au Uox Afuot • Large-sized safety lighting • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/55-22,5, color: blue, Year of construction: 2026, Equipment: ABS, - ADR - LED lighting - Air suspension - Disc brakes - Toolbox Internal number for inquiries: 6-166 Available immediately!!! Lrodpfx Afez Dt Rlouet NEW in our offer!! -> PAVIC - STAR 3-axle container chassis semi-trailer, telescopic for: 1 x 45" container 1 x 40" container 2 x 20" containers 1 x 20" centrally located and 1 x 40" HC 1 x 45" HC CHASSIS Heavy-duty main frame in I-beam construction, designed for particularly high durability; high-strength MC700 steel, automatically robot-welded. • Extension in the middle and rear area • Fixed front chassis • Locking mechanism by means of brake chamber in the middle and rear area • Suitable for a GENSET in the middle area AXLES 3 x 9 t SAF axles with disc brakes. SUSPENSION Air suspension. LIFT AXLE 1st axle. TIRES 6 x 385 / 55 R 22.5 (A-brand). RIMS 6 x 11.75 x 22.5 steel rims (Turkish brand). BRAKE SYSTEM WABCO braking system. 2-line brake system in accordance with EC regulations. PREMIUM EBS 2S/2M with RSS (Roll Stability System). Pneumatic parking brake. 1 x yellow air coupling. 1 x red air coupling. 1 x brake pressure valve (WABCO brand). TPMS. KING PIN 1 x coupling pin 2" (JOST or SAF brand). SUPPORT LEGS Mechanical support legs, operable on one side, with 2 speeds. Both support legs are operated via a crank handle on the right side (BPW or SAF brand). ELECTRICAL SYSTEM Voltage 24 V, 2 x 7-pole and 1 x 15-pole ISO, EC-compliant. Lighting according to standard with SAE tail/brake lights, side marker lights, brake warning lights and rear turn signals. 2 combined tail/brake lights (red). 2 combined turn signal lights (orange). 1 license plate light. 1 license plate holder. ADR. All components of the electrical system: ASPOCK ECOLED III. In accordance with EC regulations. ACCESSORIES • 6 x plastic fenders (DOMAR brand) • 2 x mud flaps • 2 x reflective strips and reflector markings on the rear and sides • 1 x rear bumper • 1 x water tank • 2 x wheel chocks with holders • 2 x aluminum side protection • 1 x toolbox • 12 x twistlocks (JOST) - Spring model of the twistlocks at the rear and in the middle • 8 x RoRo rings (according to IMO standards) PAINTING Before painting, surfaces and components are smoothed and then cleaned with a mixture of water and chemicals. Sandblasting up to SA 2.5, primer; then 2 coats of acrylic topcoat. RAL code 5015 sky blue. Financing / hire purchase, as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team is at your disposal. This is a non-binding offer. Subject to prior sale, errors and changes. General Information Year of manufacture: 2026 Axle configuration Tire size: 385/55-22.5 Axle brand: Pirelli Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Weights Unladen weight: 4,998 kg Payload: 22,002 kg GVW: 27,000 kg Condition...

Condition: used, first registration: 07/2023, fuel type: diesel, fuel: diesel, Year of construction: 2023, Mercedes-Benz Sprinter Pro 317 CDI Chassis *Former refrigerated vehicle!* • Engine: OM 654 DE 20 LA • Power: 125 kW / 170 HP • Emissions standard: EURO 6e • HVO compatible • 9-speed automatic transmission • ABS / ASR / ESP • Alternator 14V / 250A • AGM battery 12V 70Ah • Single-pole main battery switch • Jump-start terminal • Terminal strip for electrical connection • External temperature display • Engine oil level indicator on cold start • 93-liter fuel tank • Fuel filter with water separator • SCR exhaust aftertreatment, generation 4 • Crosswind Assist • Traffic Sign Assist • Active Lane Keeping Assist • ATTENTION ASSIST • Communication module (LTE) for digital services • Mercedes-Benz emergency call system • Breakdown management • Heat-insulating glazing with band filter in windscreen • Rain sensor • WET WIPER SYSTEM • Heated, electrically adjustable, foldable exterior mirrors • TEMPMATIC semi-automatic climate control • Multifunction steering wheel • Height- and tilt-adjustable steering wheel • Vibration damper • Driver and passenger airbags • Driver’s suspension seat, comfort with lumbar support and armrest • Heated driver’s seat • Low driver’s seat base • Passenger bench seat (2-seater) • Seatbelt warning for driver and passenger seats • Grab handles for driver and passenger • Rear wall panelling • DAB radio • Navigation system • USB port 5V • Instrument panel charging package • Smartphone integration package • MBUX multimedia system • 1-DIN slot in front under headliner • Front cup holder • Instrument cluster with color display • Speedometer in km/h • Central locking system • Smoking package • Acoustic package • Electrical system for bodybuilder • LED High Performance headlamps • Fog lamps with cornering light • Light assistant • Side marker lights • Outline marker lights • Tail lamps in partial LED technology • Adaptive brake light • Extended rear lighting wiring harness • Pre-installation for trailer socket electrics • Pre-installation for 3rd brake light electrics Lrjdpjyut H Ejfx Afuot • Pre-installation for programmable special module electrics • Pre-installation for switch panel • Pre-installation for Remote Service Plus • Pre-installation for Live Traffic Information • Pre-installation for blind spot assist for bodybuilder • Pre-installation for reverse assist electrics • Front mud flaps • Reinforced longitudinal members • Rear towing eye • Unladen weight at least 2,381 kg • Additional body structure measures • Additional body structure measures 2 • Gross vehicle weight: 3,500 kg • Axle ratio: i=3.923 • Front axle with increased load capacity • HOLD function • Hill start assist • Stability program, Stage II • Wireless tire pressure monitoring on front and rear axles • Tires: 235/65 R16C • Tread depth: 5/5 / 7/9 mm • Rims: Steel 6.5 x 16 • Wheelbase: 3,660 mm • Frame length: 3,350 mm - 1 owner! - German vehicle! Errors and prior sale excepted! Please contact Joannis Arpantzanis or Kai...