Used Flood Lighting Poles for sale (18,537)

Condition: like new (used), Year of construction: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Blade cutting speed: 1700/3400 rpm Ndedpfswu Tz Rex Afujb Cutting angle: from -45° to +45° Cutting capacity: at 0° – round: 120 mm, square: 105 mm, rectangle: 180x70 mm Touchscreen Machine weight: 605 kg

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable MACHINE DETAILS Machine type: Diesel forklift UVV certificate valid until: 05/2027 Dimensions & Weight Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3 Njdozz Hl Hopfx Afuedb

Condition: good (used), saw blade diameter: 350 mm, – Saw blade, 350 mm – Double miter cut – Hydrocheck system Ndedpfx Afeunh H Ejuob – Protective cover – Mist lubrication system – 400 V

Condition: new, Year of construction: 2017, height / mm working width / mm Ndjdpez Dxtfefx Afusb distance to reflector / mm

Year of construction: 2022, operating hours: 1,056 h, condition: used, For inquiries about the attachment, Mr. Herden will assist you (by phone). Generac V20 Lighting Tower / 1,056 hours / Year of manufacture: 2022 / In stock & immediately available Price: €12,890.00 net / €15,339.10 gross Year of manufacture: 2022 Operating hours: 1,056 h Engine: Kubota Illuminance: 4 x 300W Low voltage: 48 Volt Lighting type: LED Coverage: approx. 4,500 m² Mast height: max. 8.50 m Runtime: approx. 140 h Noise level: approx. 58 dB(A) Transport dimensions (LxWxH): 2,250 mm x 1,400 mm x 2,436 mm Deployed dimensions (LxWxH): 2,640 mm x 1,900 mm x 8,500 mm Weight: 980 kg Good condition! Ready for immediate use! We have many more lighting towers available from stock! Mr. Herden (phone) is happy to assist you. On request, we will be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Nsdpfx Ajyl Hg Hefuedb Errors and prior sale excepted! Internal No.: 030269 = Further information = New: No Application: Construction Please contact Marius Herden for further information.

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M - 2 saw heads - max. saw length 5000mm Njdoucuhdopfx Afujdb

Condition: new, Year of construction: 2026, saw blade diameter: 400 mm, – 400 mm saw blade – Double miter cut – 4 pneumatic clamps Ndodeu Si Ndepfx Afusb – Mist lubrication system – Air blow gun – Protective cover – Documentation – 400V

Condition: new, Year of construction: 2018, functionality: fully functional, turning length: 3,060 mm, turning diameter: 494 mm, spindle speed (max.): 2,000 rpm, overall weight: 17,500 kg, controller model: Fanuc 0i-TD, An unused CNC lathe is for sale! TECHNICAL DETAILS Maximum turning diameter: 800 mm Turning diameter: 494 mm Maximum turning length: 3,060 mm Spindle speed max.: 2,000 rpm Bar capacity: 115 mm X-axis travel: 300 + 20 mm Z-axis travel: 3,100 mm Chuck: 15″ Spindle nose: A2-11 Tool stations: 12 Boring bar diameter: 50 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Ndsdpfx Ajz Ar Rkefusb Tailstock diameter: 110 mm Tailstock taper: MK 5 Incline: 45° MACHINE DETAILS Control model: FANUC 0i-T C-axis: Duplomatic VDI60 Spindle motor power: 30 kW Motor power X-axis: 4 kW Motor power Z-axis: 7 kW Electrical connection: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,120 x 2,310 mm Machine weight: approx. 17,500 kg EQUIPMENT Linear scale on the X-axis Hydraulic steady rest SMW SLUB-5 D50-D310 Tool presetter Renishaw HPMA Warning light Chip conveyor High-pressure pump (10 bar)

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 Nodjzinzrepfx Afuodb - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: used, functionality: fully functional, mileage: 270,000 km, power: 102.97 kW (140.00 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 2,760 kg, maximum load weight: 665 kg, overall weight: 3,500 kg, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 3, total length: 6,315 mm, total width: 2,190 mm, total height: 3,230 mm, permissible axle load (axle 1): 1,900 kg, permissible axle load (axle 2): 2,240 kg, loading space length: 3,635 mm, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, car registration, central locking, compressor, cooling unit, cruise control, electric window regulation, electronic stability program (ESP), full service history, onboard computer, power assisted steering, power mirror, soot filter, traction control, This light-duty truck with both freezer and refrigerated compartment in the cargo box is equipped with a new engine installed in our workshop and therefore has 0 km on the clock. Furthermore, the vehicle is in very good mechanical condition, though it has some bodywork damage. The vehicle can be inspected at our premises. Ndedpoy Ny Duofx Afujb

Condition: used, machine/vehicle number: H2X388V00602, Year of construction: 2019, operating hours: 15,156 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,700 mm Load capacity: 4,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 2,560 mm Weight: 8,000 kg Battery date: 02/11/2022 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 81.1 V Service valid until: 08/2027 UVV (Occupational Safety) valid until: 08/2027 Operating hours: 15,156 h EQUIPMENT 3rd and 4th hydraulic valve Hydraulic fork positioner with side shifter Integrated scale Tilt angle indicator Windshield with wiper Nsdpfezz Hm Rsx Afusdb Roof pane Lateral fall protection White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Safety light (front) Safety light (rear) Comfort seat with lumbar support and seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 43

Condition: good (used), Year of construction: 1989, Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Nodpfox Rvb Sjx Afusdb Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: like new (used), functionality: fully functional, Model 2DS: Measurable sheet sizes: 100 - 2000 mm Scale graduation: 1/2 mm Nodpsygi A Tjfx Afujdb Accuracy of reading: 1/2 mm (1/10 mm possible) Angular deviations: 1/2 mm Glare-free built-in illumination: 4 fluorescent tubes (210 Watt) Voltage: 220V - 50 Hz Exterior dimensions in mm: 2120 x 1150 x 220 Weight (ca.): 108 kg

Condition: good (used), Year of construction: 2016, saw blade diameter: 600 mm, type of input current: three-phase, operating pressure: 8 bar, Industrial aluminum sawing machine that saws automatically, using pneumatic 2-button operation, and where the workpiece is clamped pneumatically on both sides. The clamping is adjustable both horizontally and vertically. Furthermore, this sawing machine is equipped with a mist lubrication system, which improves the sawing process. Nodpfx Aszf U Tmsfusdb The saw blade feed is adjustable on this machine. Features: - Automatic sawing motion - Double pneumatic clamping - Saw blade moves from bottom to top - Solid carbide saw blade - Adjustable sawing speed - Length stop - Lubrication and reduction system - Atomization system - Air gun - Miter sawing - Automatic sawing and manual sawing The machine is installed and delivered assembled. Testing is possible.

Condition: used, machine/vehicle number: 516301X00339, Year of construction: 2020, operating hours: 5,917 h, No minimum price – guaranteed sale to the highest bidder! Ndedezz Hqispfx Afueb TECHNICAL DETAILS Lifting height: 4,150 mm Load capacity: 2,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex free-lift mast Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery voltage at rest: 85.4 V Mast type: Duplex free-lift mast Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Own weight: 4,700 kg Service valid until: 05/2027 UVV (German industrial safety regulations) valid until: 05/2027 Operating hours: 5,917 h EQUIPMENT 3rd and 4th valve Fork positioner Hydraulically adjustable forks Side shifter Semi-cabin Windshield wiper Comfort seat LED work light (front) LED work light (rear) Orange warning light Safety light (front) Safety light (rear) If required, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading is possible up to 6 tons using a large forklift truck on site. Loading is at your own risk. Rear loading is possible via a ramp with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 159

Condition: excellent (used), saw blade diameter: 400 mm, – 400 mm saw blade – Double cut / double miter – 4 pneumatic collets – Hydrocheck – Mist lubrication system – Blow gun – Protective hood Nodpfx Aswlwa Sjfuodb – 400 V

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit Ndodpfxeuiy Rqo Afujb - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: WB-RES-SS40A, Gluma metal busbar system – standard length 4.5m Type SG4/1/40 – 4-pole – L1 L2 L3 PE – quantity available: approx. 81m Type SG5/1/40 – 5-pole – L1 L2 L3 N PE – quantity available: approx. 126m Ndsdpfjzxa R Rox Afuob Voltage Ui max. 400V, frequency 50 – 60 Hz Price refers to each 4.5m busbar length, including connectors Complete systems are available, including connectors, end pieces, feed-in units, current collectors, and mounting brackets. Robust resistance to temperature and dirt thanks to a stable, galvanized metal construction. Busbar systems are in good condition. Used condition, see pictures.

Condition: good (used), Year of construction: 2018, ASYS TRM 03 Workstation * Dimensions (L × W × H): 1,590 × 800 × 1,055 mm * Transport height: 950 mm (±50 mm) * Weight: 200 kg * PCB size: 70–460 × 50–460 mm Nedpfxozivt Ne Afuedb * PCB thickness: 0.8–4.5 mm * PCB weight: 0–3 kg * Maximum component height: ±40 mm * Power supply: 230 V / 50 Hz * Pneumatic supply: 6 bar (operating pressure 5 bar), oil-free compressed air * Sound pressure level: < 75 dB(A)

Condition: used, functionality: fully functional, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity available: 8 Manufacturer: Sick AG Model: M40S-64A503AA0 Ndsdpszh Ak Eofx Afueb Type: Safety light curtain, Type 4 Protection field height: 640 mm Range: up to 30 m Resolution: 30 mm Safety category: Type 4, SIL3, PL e Voltage: 24 V DC Outputs: 2 OSSD Function: Protection of hazardous areas on machines

Condition: used, machine/vehicle number: H2X393G05053, Year of construction: 2016, operating hours: 15,338 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,650 mm Fork spreader: 550–1,940 mm Fork length: 1,800 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Diesel Next service: in 461 hours UVV certificate valid until: 06/2027 Dimensions (L x W x H): 4,700 x 1,250 x 2,190 mm Operating hours: 15,338 h EQUIPMENT 3rd and 4th valve Full cab Heater Windshield wiper LED work light, front LED work light, rear Comfort seat Fork spreader with side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Nedpfx Afozz Hr Tjuedb Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 173

Condition: like new (used), 10 - 30 V DC , 200 mA switchable, with on/off delay Length: 85 mm Diameter: 30 mm Weight: 205 g Condition: like new Njdozfghpopfx Afujdb

Condition: good (used), Carl Zeiss Axiovert 40C Inverted Light Microscope The Carl Zeiss Axiovert 40C is a routine inverted microscope specifically designed for examining living cells and cell cultures in biology and medicine. Its inverted design places the objectives below the stage, enabling observation in larger culture vessels such as Petri dishes or microtiter plates. Technical Features Optics: Equipped with the ZEISS ICS (Infinity Color-corrected System) for high optical performance in all contrast modalities. Illumination: Standard with a 12 V 35 W halogen lamp for transmitted light; an HBO 50 mercury vapor lamp (model CFL) is available as an option for fluorescence applications. Contrast modalities: Supports brightfield, phase contrast, and PlasDIC. Ndedpfeyk Dbljx Afueb Camera connection: The Axiovert 40C features an integrated front-mounted photoport (C-mount adapter) for digital documentation. Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Full automatic Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Misc. accessories MARCELS MASCHINEN AG Ndjdpfey H Dmnsx Afusb

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 50 kg, type of input current: AC, overall weight: 65 kg, table load: 50 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, We are offering this very well-maintained KEYENCE VL-500 3D line scanner, manufactured in 2021. Ndedpey U Ngcsfx Afusb Manufacturer: KEYENCE Model: VL-500 Year of manufacture: 2021 Condition: very good Category ID: 402 Type ID: 1927 Machine type: 3D line scanner Included in the offer: 1 unit of control unit, part no. VL-500 1 unit of 500 mm base, part no. VL-550 1 unit of measuring head, part no. VL-570 1 unit of accessories, including calibration plate, user manuals, part no. VL-A2D 1 unit of cover, part no. VL-C2 1 unit of Win10 PC for VL-500 series, part no. 972337 1 unit of comparative measurement module, part no. VL-H2P 3 units of AC power cables, part no. OP-99031 Condition is very good, as the scanner has rarely been used. Also included: Calibration certificate valid until 2025. If you have any questions or require further information, please send us a message or call us.