Used Tos Fngj 32 for sale (8,601)

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Cedpfxow Urirj Aktori

Condition: good (used), functionality: fully functional, Machine weight: 1725 kg Total machine power: 3 kW Table clamping surface: 800x400 mm Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Cedpevzkzcefx Akteri Working vertical feed - y-axis: 8-400 mm/min Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg

Condition: good (used), Year of construction: 1980, TOS FNGJ 32 Milling Machine Year of manufacture: 1980 Cedpjx U Eb Ajfx Aktjri Equipped with Heidenhain TNC 135 control With accessories Table size: 800x400 mm Spindle speeds: 40–2000 rpm Longitudinal and cross feeds: 8–400 mm/min Vertical feeds: 4–200 mm/min Distance from horizontal spindle axis to table surface: 125–525 mm Distance from vertical head spindle axis to table surface: 58–458 mm X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Year of construction: 2000, condition: repair required (used), functionality: not functional, Spare parts, service, and repairs for tool milling machines from the production of TOS, later INTOS Zebrak of the series FN 20/32/40, FNGJ 20/30/32/40/50, FNGP 40/50 Cedpfxsxg H Hhe Aktsri

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Cedow U Aahepfx Aktjri Spindle mount ISO 40 Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Fixed table

Year of construction: 1983, condition: good (used), FGSV 32 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Parameters: Table 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Speed ​​range 35-1800 rpm. Distance between spindle and table 140 - 590 mm. Distance between spindle and column 120 - 520 mm. Max. table load 500 kg. Main engine power 11 kW. The demand for a power of 15 kW. Dimensions: Cjdpfx Aoh Ir Rmoktsri Length X Width X Height: 2735 X 2425 X 2475 mm. Weight 4200 kg.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, grinding length: 630 mm, grinding diameter: 320 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. grinding length: 630 mm Max. grinding diameter: 320 mm MACHINE DETAILS Manufacturer: TOS HOSTIVAR Csdpfx Asyvf S Nskteri Model: BHU 32 Year of manufacture: 1987

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system: Siemens 840-D Crodjz Ii Tdjpfx Aktsi Spindle diameter: 130 mm Spindle speed: 3500 RPM Spindle mount: ISO 50 Torque: 1320 Nm Main motor power: 37 kW Travel in X-axis: 4000 mm Travel in Y-axis: 2500 mm Travel in Z-axis: 2000 mm Travel in W-axis: 800 mm Working feed rates: 15 m/min Rapid traverse rates: 20 m/min Rotary table: 1800 x 1800 mm Table load capacity: 20,000 kg Tool magazine: 60 positions Machine weight: approx. 36 tons Universal milling head - manual

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Crsdez Ebu Ujpfx Aktoi Rapid traverse rate: approx. 1400 mm/min Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° - 1 piece tool holder SK 40 with slitting cutter - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition

Condition: ready for operation (used), TOS milling machine FN 32, spindle taper SK 40, speed range 40–2000 rpm Cedpfeyf Efhsx Aktjri

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 140569, Table: 600 x 300 mm Travel ranges X / Y / Z: 400 / 300 / 350 mm Spindle mount: SK 40 Spindle speeds: 50 - 2500 rpm Drive power: 2.2 kW Csdpfxezvqnns Aktsri Accessories: Vise, dividing head, rotatable vertical milling head, HEIDENHAIN for X Y Z Weight: 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Operating manual in German

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m Crodpfxjx U Ence Aktei

Condition: used, TOS P23 four-sided planer – 250 x 180mm Crodjz Niiispfx Aktsi Manufacturer: TOS SVITAVY Model: P23 Max. height: 180mm Max. width: 250mm Adjustable feed rate: 5-40 m/min 8 cutterblocks 2 x bottom 2 x right 2 x left 2 x top Pneumatic roller pressure Robust planer

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Csdsufgb Ijpfx Aktori

Condition: good (used), Year of construction: 1996, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 36 rpm, table width: 400 mm, table length: 1,400 mm, overall weight: 4,980 kg, input frequency: 50 Hz, Brand: TOS - Huvema Model: FGS32/40t Year of manufacture: 1996 Serial number: 23700080 Capacity (kW): 11 Voltage: 3x 380 V Frequency (Hz): 50 RPM: 35.5 - 1800 Dimensions (LxWxH, mm): 2300 x 2300 x 2700 Weight (kg) approx.: 4980 Stock quantity: 1 Manufactured in: Czech Republic Table dimensions (mm): 1400 x 400 Digital display brand & model: Ditron D60-3V X-Y-Z Comments: Optical condition good Longitudinal travel (mm): 1000 Cross travel (mm): 400 Vertical travel (mm): 450 Terms of sale: Sold as is. Csdpfx Akeydk E Rjtjri

Year of construction: 1994, condition: used, functionality: fully functional, Lathe, including chip tray and emulsion tank with pump, machine accessories: 315 mm chuck, rotating center for tailstock, technical documentation, technical parameters: distance between centers 2000 mm, swing over bed 500 mm, swing over carriage 250 mm, spindle bore 56 mm, maximum workpiece weight 1100 kg, spindle taper M 60, 1:20, tailstock center taper MORSE 5, spindle speed range 11.2-1400 rpm, power 2 x 5.5 kW, machine dimensions (wxd) 1180 x 4420 mm, weight 3260 kg, the machine can be tested by arrangement. Crods Ah S Auspfx Aktsi

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. Crodpfx Aksmk E D Iotei The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, TOS W100A - Horizontal Boring and Milling Machine The W100A is one of the most successful models from TOS Varnsdorf and represents the latest version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile, and easy to operate and maintain. Ideal for single and small batch production with high reliability and comparatively low costs. - Classic design with a fixed column - Extendable spindle - Cross-traveling, rotatable work table - Integrated faceplate support in the spindle head - Option to use long drill rods with support from the drill support - Hardened and ground guide rails - Central lubrication - Position indicator Crodpo Ahg Dtefx Aktoi The machine is suitable for drilling, milling, facing, and threading, as well as general machining operations on large workpieces. Technical data Spindle head: - Spindle diameter: 100 mm - Spindle connection: ISO 50 - Spindle travel (Z): 900 mm - Spindle center height above the table (Y): 0 - 1120 mm - Distance between faceplate and support bearing: 2800 mm - Faceplate diameter: 600 mm - Centering hole diameter in the table plate: 280 H6 mm - Centering hole depth: 8 mm - Max. facing diameter: 900 mm T-slots: - Faceplate, number/size/pitch: 2 / 20 H12 / 335 mm - Slide, number/size/pitch: 2 / 16 H12 / 150 mm Table: - Table cross travel (X): 1600 mm - Table longitudinal travel (W): 1250 mm - Clamping area: 1250 × 1250 mm - T-slots, number/size/pitch: 9 / 22 mm / 160/80 mm - Centering hole diameter in the table: 180 H6 mm - Centering hole depth in the table: 6 mm - Max. workpiece weight: 3000 kg - Tailstock slide travel: 1000 mm Speed: - Number of spindle speed steps: 23 - Spindle speed range: 7.1 – 1120 rpm - Number of faceplate speed steps: 16 - Faceplate speed range: 7.1 - 224 rpm - Max. torque of the spindle at speed: 3350 / 7.1 - 78.5 / 1120 Nm/rpm Feeds: - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 18 - 900 mm/min - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 25 - 1400 mm/min Rapid traverses: - Spindle, spindle head, table & tool slide: 2800 mm/min - Table rotation: 1 rpm - Tailstock bearing: 696 mm/min Threads: - Metric threads, number/range: 18 / 0.25 – 12 mm - Inch threads, number/range: 18 / 120 - 2.5 threads/1" Electrical data: - Main motor power: 11 kW - Total power consumption: 15 kW - Operating voltage: 3x 400 V / 50 Hz Dimensions & weights: - Machine dimensions WxHxD: approx. 6020 × 3000 x 3500 mm - Machine weight: approx. 14000 kg

Condition: new, Year of construction: 1990, functionality: fully functional, Clamping ring for vertical quill TOS/INTOS FNG, FNGJ, FNGP tool milling machines. Machining must be carried out to suit the specific machine. We are happy to take care of this for you, as well as any repairs of milling heads for machines from the TOS/INTOS Zebrak production. Crodoyghywopfx Aktei

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, center width: 2,000 mm, rotational speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 1,050 mm Distance between centers: 2,000 mm Spindle bore: 105 mm Spindle speed: 2.24–450 rpm Workpiece weight: max. 5,000 kg MACHINE DETAILS Control: Conventional Csdpfxs Af Hdue Aktjri Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,700 mm Machine weight: 8,000 kg EQUIPMENT Four-jaw chuck Fixed steady rest

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) Cjdpfx Akolkgvbjteri accessories: coolant equipment, collet chuck incl chucks

Condition: new, New shields for machine tools produced by TOS/INTOS ŽEBRÁK of the FN, FNG, FNGJ and FNGP series. Crjdpfer Nbp Aex Aktoi

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. Crjdpj Ahkx Isfx Aktoi The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: used, Year of construction: 1969, Drill press, bench drill, column drill, pillar drill -Manufacturer: TOS, high-performance column drilling machine type 40 TF / C -Motor: MEZ 2.2 kW -Speeds: 56 - 2240 rpm Cjdpfxjhck U Ie Akteri -Table size: 400 x 315 mm, travel 600 mm -spindle taper: MK4 -Spindle stroke: 165 mm -Projection: 290 mm -Pillar Ø: 140 mm -Dimensions: 1200/650 / H1990 mm -Weight: 602 kg

Condition: refurbished (used), functionality: fully functional, Tos Zebrak FN-32 Milling machine. Refurbished, fully functional. Total machine input: 3 kW Longitudinal movement of the table - x-axis: 600 mm Transverse movement of the table - z axis: 400 mm Vertical table movement - y axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - axis z: 8-400 mm/min Crsdpfx Ajv Rr Hlsktei Working vertical feed - y-axis: 8-400 mm/min Fast x/z/y: 2000/2000/1000 mm/min Good working condition. Please check out our other listings as well.