Used Tos Sn 50 for sale (38,202)

Condition: ready for operation (used), Bosch SPM 50 spindle module SN:372860, used, normal signs of wear, 100% functional, delivery as shown in the photos. Guedpfx Asx Eqzcen Eei

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. Gedpfxsmk E D Ie An Ejui The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° Gjdstv Iklopfx An Esui base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm Gsdpfxev Hzqxj An Eoui - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: excellent (used), CATALOGUE NUMBER 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm Top: - feed rollers - infeed roller, sequential - pressure rollers, 2 rows - infeed roller, sequential - planing roller 500mm, 4-knife, 7.5kW motor - pressure rollers - outfeed roller, smooth - pressure roller on the outfeed Bottom: - adjustable infeed table + pressure roller - smooth feed roller - planing roller 500mm, 4-knife, 5.5kW motor - 2 smooth feed rollers - side pressure roller Rear: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - stepless feed speed adjustment 8-30m/min - electric table lifting - dust extraction nozzle diameters 2x145mm, 2x160mm - dimensions L/W/H 2050x1700x1700mm - weight 2100kg ADVANTAGES – ideal for processing flooring panels – electric table lifting – Czech production – used planer, very good condition Gsdpszxhdfjfx An Esui Net price: 37900 PLN Net price: 8814 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: ready for operation (used), mvl QLN65/0012 A14-3038L-63 cross-flow fan unit 220/230V 50/60Hz SN:36118 ,used, normal traces of use, 100% functional, scope of delivery according to photos Gedpjl Eciujfx An Ejui

Condition: ready for operation (used), mvl QLN65/0012 A14-3038L-63 Cross-flow fan unit, 220/230V, 50/60Hz, SN: 116101, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Godpfx Anelpkuxs Esui

Condition: ready for operation (used), Berger Lahr VRDM 397/50 LWC SIG Positec 52525035600 stepper motor, serial number: 9735750 with encoder, used, in good condition, 100% functional, delivery as per photos. Gusdpfow Ikbmsx An Eoi

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm grinding wheel rotations: 1570/2050 Upm electrical connection: 380 V kW space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg Gjdpfx Anogayiwj Esui

Condition: new, Axesta Grossenbacher 50 50 630, serial number SN:910221002, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Gusdpfxji D T Auo An Eoi

Condition: new, Sick / Stegmann SRM 50 Stand Alone Motor Feedback System with conical shaft and resolver support SN:6CR1D0502000-F60006059, unused in opened original packaging, 100% functional, scope of delivery as per photos Godpfx Ajpf Atnen Ejui

Condition: new, Year of construction: 2026, functionality: fully functional, Swing over bed 710 mm Swing over cross slide 420 mm Swing in gap 910 mm Gap length 357 mm Center height 250 mm Center distance 2000 mm Bed width 450 mm Speed ​​10 – 1600 rpm Cutting tool diameter 32 x 32 mm Spindle bore D73.5 mm Drive power 5.5 kW Tailstock sleeve D90 mm Tailstock sleeve travel 180 mm Tailstock taper Morze 5 Weight approx. 3250 kg Dimensions L x W x H = 3500 x 1100 x 1850 mm Accessories, Equipment - 3-axis indicator system - Chuck guard - 3-jaw chuck D250 mm - 4 Chuck diameter 300 mm - Tool holder guard - Long slide stop - Steady rest - Traveling steady rest - Standing center - Reduced adapters for main spindle - Tailstock - Coolant system - 4-way tool post - Machine light Gedpfx Aeyt Ihnsn Eoui - Rapid traverse on longitudinal and cross slides - CE Mark - Machine manuals

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,178 h, load capacity: 5,000 kg, lifting height: 4,260 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,880 mm, fork carriage width: 1,260 mm, fork length: 1,350 mm, empty load weight: 7,390 kg, total length: 4,200 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 650 Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this J/SNHP 50/13/42V. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes and up. We can also display your vehicle for consignment sale at our facility. Fork positioner, Fork positioner opening range: 380 / 1245 mm Gjdpjz Ev A Tefx An Eoui Heater, full cab, full free lift, Platform height: 880 mm

Condition: ready for operation (used), Hörmann B 460 FU control unit, 636721, 230V, 50 Hz, serial number: 65924483590, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Gujdpfx Aelcf Sksn Esi

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories Guodofg Ep Depfx An Eei MARCELS MASCHINEN CH

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm * Gujdpfxju Nkm Ej An Eoi

Condition: new, Year of construction: 2026, functionality: fully functional, New, ready for delivery: BUB 50/3000 CNC Control system: Siemens One Digital axis drives Includes extensive application software Includes electronic handwheel for axes X/Z Center height: 400 mm Distance between centers: 3000 mm Weight between centers: 500 kg Longitudinal travel of Z-axis: 3250 mm Positioning accuracy X-axis: 0.001 mm Headstock spindle mounting: MK 5 Tailstock mounting: MK 5 Godpjv N D Hbefx An Eeui Drive power: - Grinding spindle: 11 kW - Workpiece spindle: 2.5 kW - Total installed: 22 kW Machine design with complete enclosure Preparation for dust extraction system included Separate screen, touch probe control, automatic balancing, and gap/crash control included. 1 grinding wheel: 508 x 80 x 203.2 mm Available immediately. Optional filter system in various designs.

Condition: ready for operation (used), Bosch SM 25/50-C servo module, serial number: 416106, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Gujdpfsldlr Uex An Esi

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° Guedpfsu Nlg Tex An Eoi rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: good (used), Planing working width, mm 510 Maximum height for double-sided planing, mm 200 Maximum height for four-sided planing, mm 150 Lower planing shaft with 4 knives, electric motor 5.5 kW Gsdpfx Ansxvfwke Ejui Upper planing shaft with 4 knives, electric motor 7.5 kW Right spindle diameter 40 mm, electric motor 4 kW Left spindle diameter 40 mm, electric motor 4 kW Electric height/width adjustment

Year of construction: 2000, condition: used, 2000 M.A.C. SN-OL 1230x650-10T Shrinker press for wood bending Godpoychqhofx An Eoui Working dimensions: mm. 1230 x 650 Pressure power: Ton. 10 Motor power: kW 5.5

Condition: new, Axesta Grossenbacher Input 40x24VDC / 50 70 360, Serial No.: 9807602063, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Godpei D T A Hjfx An Ejui

Condition: new, Axesta 50 70 086 Axis Control, Serial No.: 9705180034, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Gusdpei D T Aqsfx An Eji

Condition: new, Neugart WPLS142-005-SSSB3AG-E24/50/130/165/B5/M10 bevel gearbox, article number 100336738, serial number 2231204-1, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Guodpfxji Eb Ufj An Esi

Condition: new, Year of construction: 2026, functionality: fully functional, center height: 250 mm, workpiece weight (max.): 750 kg, grinding length: 2,000 mm, grinding wheel diameter: 500 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill travel distance: 50 mm, workpiece weight between centers: 500 g, distance between centers: 2,200 mm, workpiece diameter between centers: 500 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 2,500 mm, grinding spindle speed: 1,400 rpm, overall weight: 8,000 kg, warranty duration: 24 months, workpiece spindle speed (max.): 560 rpm, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Wheelhead motor kW 11 Gujdpfx Ajpy A Iusn Esi Total power demand of machine kW 45 - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200