Used Traction Battery for sale (13,903)

Condition: used, Year of construction: 2012, Drive: Wheel Empty weight: 7.583 kg Mast: articulated arm Lifting capacity: 227 kg Working height: 1.600 cm Serial number: Z452512A-43368 Max. horizontal reach: 765 m Transport dimensions (LxWxH): 6.83x1.79x1.99 Please contact PFEIFER GROUP for more information Crjdpfxetr Nm Ao Ah Uji

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 6970-06, turning diameter: 480 mm, turning diameter over top slide: 240 mm, center height: 240 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Submitting a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Codpfx Ahjxm Sizs Ujri Turning diameter: 480 mm Swing diameter over cross slide: 240 mm Turning length: 1,000 mm Spindle bore: approx. 63 mm Spindle speed: 11–2,240 rpm Centre height above bed: 240 mm Centre height above carriage: 140 mm Turning diameter over carriage: 240 mm MACHINE DETAILS Electrical Data Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,200 x 1,800 mm Weight: 3,000 kg EQUIPMENT Tailstock Steady rest Toolpost Four-jaw chuck, diameter 250 mm Three-jaw chuck, diameter 250 mm Three-axis digital readout Various tool holders Centres Taper

Condition: used, Year of construction: 2016, machine/vehicle number: 08 32828, Drivetrain Type of fuel: LPG Weights Empty weight: 7.670 kg Functional Cjdpfx Aowqwhaoh Uori Mast: articulated arm Lifting capacity: 225 kg Working height: 1.700 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Solideal Max. horizontal reach: 970 m Transport dimensions (LxWxH): 6.4x1.5x1.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Keysight / Scienlab Battery Test System Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Test System – For Laboratory Use, including PC, software & technical documentation For sale is a professional battery test system consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well maintained, and ideal for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: Characteristic / Description Manufacturer: Keysight / Scienlab Model: SL1001A Year of manufacture: 2020 Voltage / Current / Power: 80 V / 600 A / 24 kW Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m Weight: approx. 700 kg Function: Charging, discharging, cycling of battery modules Condition: Very well maintained, laboratory use Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: Characteristic / Description Manufacturer: Angelantoni Industrie S.r.l., Italy Model: DM500 C 10 ESS SPEEDY BT SP Year of manufacture: 2019 Weight: approx. 1225 kg Temperature range: −70 °C … +180 °C Humidity range: 10 … 98% RH Refrigerants: R449A + R23 Pressure ranges (PS Hi/Lo): 28 bar / 8 bar Wi-Fi integrated CE marking present Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m Function: Temperature and humidity testing, ESS (Environmental Stress Screening) Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A Max. power consumption: 32.5 kW Monitoring / Sampling Unit Dimensions: 0.6 × 0.5 × 0.2 m Measured variables: cell voltages, current, temperature Interfaces: CAN, Ethernet Compatible with Scienlab / Keysight PathWave Software PC + Software + Documentation Industrial PC with control and measurement software Allows for automated test sequences, logging, and data analysis Overall dimensions / weight (approx.) Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Climate Chamber 1.6 × 2.3 × 3.3 m 1225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Complete system approx. L 3.2 m × W 2.5 m × H 3.3 m approx. 1975 kg Areas of Application: - Development, testing and lifetime assessment of battery modules (e.g., Li-Ion, LFP, NMC) - Fast charging and cycle tests - Temperature and humidity environmental simulation - Research, industrial and university laboratories Scope of delivery: Cedexuqk Hspfx Ah Uori - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring / sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: Used Scope of delivery: (See picture) (Specifications and technical details are subject to change or error!) If you have further questions, feel free to contact us by phone.

Condition: good (used), Battery charging cabinet, battery, emergency power battery, emergency power system, power supply system, lead-acid battery, Lite battery Codpfog Ualhjx Ah Uori -Manufacturer: Scott, battery for Tornado breathing apparatus -Quantity: 1x battery included -Dimensions: 145/65/H90 mm -Weight: 0.8 kg

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm Csdpfewah Rqox Ah Uori In good condition. See data sheets for details.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and pull spindle lathe with 2 axis digital readout Heidenhain from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 2-axis digital readout from Heidenhain >> 1 new three-jaw chuck 125 mm with 2 sets of jaws Credpfsu Afqlsx Ah Uji >> collet chuck device new with collets new from 3 mm to 25 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Back plate To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 2004, We are offering an exceptionally high-quality precision lathe. Within its class, this is likely the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, including CE certification and central lubrication Machine No.: T1022.2027-00 Center height: 240 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 285 mm Center distance: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 Size 6 Spindle bore: 100 mm Drive power: 11 kW Maximum torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Tailstock taper: MK 5 Machine footprint (LxW): approx. 4,000 x 1,525 mm Weight: approx. 4,300 kg Accessories: - HEIDENHAIN 3-axis digital readout Crodpsw Rdthofx Ah Usi - Central lubrication system - Electrically interlocked chuck guard - Coolant system - Chip protection rear panel - Röhm chuck, T 250 mm, with various jaws - Telescopic cover for lead and feed screw, support to bed - Machine lamp - Multifix C + 4 quick-change tool holders - Live center - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slides Condition: The machine is in very good technical and visual condition. Backlash on cross slide approx. 0.3 mm, on compound slide approx. 0.15 mm Spindle nose runout approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over approx. 750 mm bed length (measured on flat guideway towards chuck using dial indicator) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for operating lever replaced - Locking pin for interlock replaced Price is net, ex stock, loaded free of charge. Delivery by company truck can be arranged at extra cost.

Condition: used, Year of construction: 2015, machine/vehicle number: 15019, Drivetrain Credpfx Ahjtr Nqfs Uei Type of fuel: LPG Weights Empty weight: 6.010 kg Functional Mast: articulated arm Working height: 3.300 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 7.4x1.1x2.27 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Make: WEILER Model: COMMODOR Year: 1979 Technical Data Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost Crsdpoxt Ngqofx Ah Uji • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Centre height: 290 mm Crsdpfxjxtu Ers Ah Uoi Swing over bed: 580 mm Centre distance: 3000 mm Equipped with a flat belt grinder, e.g. for shaft or pipe grinding Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Codpfou Aftgex Ah Uori Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: good (used), Lead and feed spindle lathe Matra SM-3000 Country of origin: Spain Turning diameter over bed 600 mm Turning diameter over support 370 mm Crsdpfovq I Npex Ah Usi Turning length 3000 mm Turning diameter in the crank 900 mm Length of the crank 280 mm Spindle bore 72 mm Speed range 17-1,652 rpm Spindle speed levels 36 Main motor, power 9/11 kW Rapid traverse longitudinal-transverse Tailstock MK5 Machine weight approx. 4 t Dimensions (LxW) approx. 4800x1300mm Equipment/accessories: - Fixed steady rest with rollers/max. Workpiece diameter 220 mm - Coolant system - Bed stop - Röhm lathe chuck D500mm - Digital display 2-axis SINO - Multifix C base holder The machine is in very good, fully operational condition. Price net, free loading from warehouse

Condition: used, Year of construction: 2015, machine/vehicle number: 15007, Weights Empty weight: 6.010 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 3.300 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Crsdpfxotr Nr De Ah Uei Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 7.4x1.1x2.27 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Crsdpevtp Edsfx Ah Uei Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: reconditioned (used), We are offering an exceptionally good precision lathe. The machine is probably the best German lathe that has been built in this class. BOEHRINGER precision lathe model DUE 800 Year of manufacture: 1984 Order no.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter over facing slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar passage: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Csdort T S Rspfx Ah Uori Max. Torque: 6300 Nm 24 Speeds: 7.1 - 1400 rpm 60 face feeds: 0.05 - 28 mm/rev 60 longitudinal feeds: 0.06 - 56 mm/rev Rapid traverse in longitudinal cross feed Motorized top support Tailstock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital readout HEIDENHAIN Coolant device; chip protection rear panel, power chuck autoblock 500 mm with clamping jaws, roller conveyor cover for lead screw support to bed, machine light, chip conveyor, Parat basic holder incl. 11 holders, suction unit, 3-jaw steady rest with roller inserts (moving), emergency stop, chuck key, moving center point, operating instructions Condition: The machine is in very good technical and optical condition. Backlash in the top slide 0.1 mm and face slide 0.15 mm The geometry of the machine is also very good (was checked with a dial gauge) Measured on the flat track guide with dial gauge in the direction of the lathe chuck Bed wiper replaced, gearbox input shaft axial play compensated and bearings replaced, drive pins on motor/gearbox side replaced, shaft seals on lock case replaced, various bearings replaced The machine can be demonstrated under power. Functional videos can also be sent on request.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS guide and feed spindle lathe in very good original condition! Technical specifications: >> Year of manufacture approx. 1992 Machine no. 4549 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm Cedpfewkh Abox Ah Uori >> Short taper spindle head DIN 4 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> New collet chuck system, new collets from 3 to 25 mm >> 1 piece Three-jaw chuck with 2 sets of jaws >> Mulifix size A with 2 tool holders About the machine: Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition.

Condition: good (used), Weiler Condor VS 2 center lathe and feed spindle lathe Technical data: Center height 160 mm Center width 800 mm Spindle bore 40 mm Bed width 240 mm Speeds 12 - 2800 min-1 Drive power 3 kW Tailstock holder MK 3 Quill stroke 110 mm Feed rates 0.037 - 1.253 mm/rev Weight, approx. 800 kg Dimensions (WxDxH), approx. 1930 x 880 x 1470 mm Crjdpfou E H Iwex Ah Uoi Equipment: 3-jaw lathe chuck Quick-change holder system Multifix size A incl. 1 change holder Electrically locked chuck guard Brake motor retrofitted Bed stop Emergency stop button Coolant device Machine light Chip back panel ELESTA 3-axis digital display Moving tip The machine has been technically inspected and is in very good condition. Backlash face spindle 0.2mm Top slide backlash 0.15mm Inspection under power possible at any time. Price net free loading ex warehouse

Condition: excellent (used), functionality: fully functional, Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8 from training workshop Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 3768 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital display from Easson ES8 >> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube >> 1 three-jaw chuck with 2 sets of jaws >> 1 four-jaw chuck with 2 sets of jaws >> Mulifix size A with 3 steel holders Crodpovkfhpofx Ah Uei >> Bed stop >> Turning device To the machine : We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Crodsvivmyepfx Ah Uji Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev Credexcuazepfx Ah Uei >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: Credpfxow Idlls Ah Uoi This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Cjdpfx Ajwrmuxjh Uori A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: Crjdpfsw Nw Dqsx Ah Uji We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments Codpfx Ahswb Sups Uori >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.