Used Traction Converter for sale (4,968)

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Width: 1900mm Rbodpfxevn Svus Ab Uow Height: 2100mm Weight: 7670kg

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW Rbsdpfsvrcqdex Ab Ujw >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm Rodpfx Aovrckqsb Uobw >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool Rbjdpsv Tyzcjfx Ab Uow About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm Rbodpfxovv Etvo Ab Ujw >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders Rbodpovrdlcofx Ab Ujw >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Rbsdpfswrm Dtsx Ab Ujw Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard Redpfx Aewthbieb Ujbw >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev Rjdowag Stjpfx Ab Uobw >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Power: -Input: 3x 400 V - 50/60 Hz -Output: Hertz 0-150 Hz max. 4 kVA Rbedpfxsd Dh A Do Ab Ujw -Dimensions: 400/100/H265 mm -Weight: 7.6 kg

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter, inverter, Movidrive -Manufacturer: SEW Eurodrive, converter Movidrive type MDX60A0015-5A3-4-00 -Power: 2.8kVA -Input: 3x 380- 500 V 50/60 Hz -Output: 0-599Hz -Control head:Type: MDX61B0015-5A3-4-OT -Dimensions: 340/105/H235 mm Rjdpfxsnah A Uj Ab Ujbw -Weight: 4.7 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Lenze, frequency converter type 33-8213-E with Interbus S -Max. power: 2.2 kW -Input: 3/PE AC 400 V 11.0 A 50/60 Hz -Output: 3/AC 0-400 V 5.5 A 2.2 kW 0-480 Hz -Number: 5x inverters available -Price: per piece -Dimensions: 280/240/H85 mm -Weight: 3.1 kg/pc Rbodpfx Abjh Rpafo Usw

Condition: good (used), Frequency converter, frequency transformer, converter for bottle vibrators, vibrating bottles, internal vibrators Rbjdpsc Nfd Tsfx Ab Ujw -Frequency converter -Power: 5 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H740 mm -Weight: 88 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Input: 3 PH 380-460 V - 50/60 Hz -Output: 3 PH : 380/460 V -Number: 1x converter available -Weight: 4.1 kg Rsdpfx Abscaq Dpo Usbw

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: Rsdpfx Abjcar Als Ujbw -Input: 220 V - 50/60 Hz -Output -Output: Hertz 0-100 Hz max. -Number: 1x converter available -Price: per piece -Dimensions: 300/225/H120 mm -Weight: 3.2 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Rbedpfob A Nzhex Ab Usw -Movitrac: 204 xv -Power: 4 kW -U: 400 VAC -F: 25 kHz -I: 10 A Ac -P: 4 kW -Dimensions: 130/350/H210 mm -Weight: 7 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Rsdpfx Asb Rynwjb Uebw -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power output: 25 kVA -Dimensions: 800/400/H320 mm -Weight: 224 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: KEB, Frequency converter Drive Controller Combivert -Type: F5 -Item No.: -3AHA -Power: 4.0 kVA -Dimensions: 320/90/H220 mm Redoxt Hpcepfx Ab Uobw -Weight: 3.7 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: KEB, Frequency converter Drive Controller Combivert -Type: F4 -Part No.: 15 F4 C1E-3420/1 4 -Power: 17 kVA / 11 kW -Quantity: 1x frequency converter available -Price: per piece -Dimensions: 350/130/H280 mm Rodpfxewcyfxe Ab Ujbw -Weight: 7.7 kg/pc.

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: KEB, frequency inverter Drive Controller Combivert -Type: F4 -Article No.: 13 F4 C1E-3480/1 4 -Power: 8.3 kVA / 5.5 kW -Number: 2x frequency converters available -Price: per piece Rbodpfx Abewcyh Tj Usw -Dimensions: 350/130/H280 mm -Weight: 6.6 kg/piece

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA Rjdpfx Aoh Szb Eob Uebw -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg

Condition: good (used), Year of construction: 2021, Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D90N4 -Power: 90 kW -Input: 380-480V / 50/60Hz / 156 A -Output: 380-480V / 0-500 Hz / 173 A -Number: 2 frequency converters available -Price: per piece Rbjdpfx Ajxlzibjb Uew -Dimensions: 800/290/325 mm -Weight: 55 kg/piece

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: .R11-3429 -Input: 330...480 V 50/60 Hz -Dimensions: 340/235/H85 mm Rsdpfx Absf Dq Ufe Ujbw -Weight: 4.1 kg

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter -Manufacturer: TAE, converter -Type: TA-4 -Mains: 380 V power: 4 kW -Anchor: 270 V field 340 V Redpfjgqb Ilsx Ab Usbw -Dimensions: 230/140/H95 mm -Weight: 2.0 kg

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives Rsdpsfuw Ntefx Ab Uobw -Manufacturer: Lenze, series 8600 -Type: 8603_E.2D.20 -Input: D 400 -Output: 0-400 V/5.5 A -Dimensions: 330/200/H175 mm -Weight: 6.1 kg