Used Tracto-Technik Tubomat 642 for sale (11)

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Ijdpfx Ajt Dk Ukjc Estk Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Itjdpfx Aeuccw Hoc Esk Max. tube Ø: 42mm Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm Ijdpfx Aox E Rdwjc Ejtk 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 600 h, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending radius (max.): 96 mm, mandrel length: 4,500 mm, overall weight: 1,000 kg, For sale is a pipe bending machine, purchased in 2021 and used for only two years. Since then, it has been stored in a dry warehouse. It can bend pipes with a diameter from 12 mm to 48.3 mm and a wall thickness of 4.5 mm. Dies/jaws and mandrels for steel and stainless steel pipes are included. Self-collection required upon sale. Itsdpfjxvhm Iex Ac Eok

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm Ijdeztvgwepfx Ac Eetk - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: used, Year of construction: 1994, Max. Rohrverschiebelänge: 3.000 mm 4-fold bend angle selector with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Including pre-assembly device with hydraulic cylinder Deburring unit for tubes inner and outer from 6 - 48.3 mm Tools included in the delivery: Ijdpfxjy Spfgo Ac Eetk Edge teeth: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bent shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Itedpfswnrt Sex Ac Eek Additional bending mandrels without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Ijdpfx Aceu Ibzko Estk Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Ijdpjwivn Nofx Ac Eetk Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools *

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Iodpfx Acerc Hiis Eetk

Condition: used, Year of construction: 2018, power: 29.5 kW (40.11 HP), overall weight: 2,160 kg, Due to internal restructuring, we are offering the following machine from our inventory for sale: Description: HDD drilling rig Machine type: Grundodrill 4X Serial number: 4X1826295M Year of manufacture: 2018 Weight: 2,160 kg Engine power: 29.5 kW Maximum operating pressure: 310 bar Length: 3,500 mm Width: 1,200 mm Height: 1,710 mm Maintenance and service were recently carried out by TRACTO. The unit is in working condition. Interested parties are welcome to submit their price expectations or make an offer. If you have any questions or require further information, please send us a message or give us a call. Iodpfxsy Nmffe Ac Eotk