Used Travelling Crane for sale (13,713)

Condition: used, Year of construction: 2006, Works number: 84.825, jib length: 20 m, current hook height: approx. 29 m (tower sections: 2x12 m / 1x4 m), ATTENTION: the 4 m tower section is not included in the scope of sale, it is third-party property. Tower system: 63 LC, max. lifting capacity: 5,000 kg. Comprising: slewing platform, jib, counter-jib, counter-jib platform, tower platforms, 4x counterweight ballast, radio remote control. Emergency stop function on the remote control is inoperative, wind-off function inactive. Crane is installed on foundation anchors within the elevator shaft. No inspection log book or further documentation available. Dismantling and removal only by qualified personnel or specialist company. Proof of qualification must be provided before collection! Construction site is located in the city center. Permit from local authorities must be applied for prior to collection. The current lessee can assist with the exchange of contact details. Viewing possible by arrangement with the current lessee. The crane is expected to be in use until January 2026. Collection by arrangement only! Ibjdpfx Acexnab Ueuec

Condition: used, mileage: 201,689 km, Year of construction: 2018, Serial number: YV2XTY0C3JA83xxxx Please contact ATS Norway for more information Isdpfx Aoxkt Iyscusbc Please provide reference number upon request: 21480 Car specifications: 2018 model 201,689 km PTO Hours: 1862 I-shift 469 hp Euro 6 6x2 Lift and swing on 3 axles Tires (see pictures) Internal length plan: 6,368 m Internal width plan: 2.491 m Stakes not included Pallet forks not included New towbar (2024) Chassis treatment Services taken in-house at your own workshop Air conditioning/ac Radio Light Ready for delivery   Crane specifications: 2018 model 2620K-RC HMF crane 26 hours/month Certified to: 03/26 6 hydraulic extensions 1 Manual Remote control 17 m range Ready for delivery   Description: We have a 2018 Volvo FM460 6x2 Crane truck w/ 2018 26t/m HMF crane for sale. The car is in daily use and the mileage will increase slightly. Everything works as it should according to the owner. However, errors and defects may occur as the car is from 2018. All services have been carried out at the owner's own workshop. The car has little rust and has been underbody treated. The trailer in the picture can be included if desired for an additional price. Ready for delivery. Km: 201689 HK: 469 Technical approved: Yes EU-approved until: 31.08.2026 Own weight: 14400 Euro: 6 Model: FM460

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1400 mm z-travel 1500 mm Control Heidenhain TNC 426 total power requirement 30 kW Ibjdpoxnq Dmefx Acusc

Condition: used, functionality: fully functional, CNC Bed Type Milling Machine ZAYER KMU 7000 Year of manufacture: 1990 CNC Control: HEIDENHAIN TNC 415 B Technical data: Ibodpfx Acjxn Nndeuoc X-axis travel: 5300 mm Y-axis travel: 1500 mm Z-axis travel: 2000 mm Table size: 7000 x 1000 mm Tool holder: SK 50 Spindle speeds: 12.5 - 1800 rpm Spindle motor: 22 kW Feed rate range: 6 - 10000 mm/min Rapid traverse: 15 m/min Tool changer positions: 24 Total power requirement: 70 kW Space requirements approx.: 8.7 x 4.7 x 4.1 m Machine weight approx.: 30 t Extras: Electronic handwheel Automatically swivelling milling head vertical/horizontal 2 x 180° Milling head automatically swivels on rear axis 72 x 5° Automatic tool changer (ATC 24) Coolant system Extended cross travel (Y-axis) 1500 mm Extended vertical travel (Z-axis) 2000 mm

Condition: excellent (used), color: green, lifting height: 16,500 mm, mast type: telescopic, Year of construction: 2024, CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: JP Please contact Vink Machinery for more information Sunward SWTC5D NEW Ibjdpfxjrfcdfe Acuoc * 2021 model year * Diesel * 16.5 meters hook height * 14.5 meters horizontal range * 5000 kg lifting capacity * Additional JIB * 10910 kg own weight * Air conditioning * including documents

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min Ibsdpfsxmi R Ajx Acusc -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Condition: used, Year of construction: 1999, Serial no.: 18.814, outreach: approx. 33 m, hook height: approx. 21 m, 9x ballast at 1,570 kg each, 1x base ballast at 4,850 kg, 4 foundation plates approx. 100x100 cm, HBC radiomatic remote control, inspection logbook and crane documents available. Dismantling and collection only by qualified personnel or specialized companies. Proof of qualification must be provided prior to collection! The crane is expected to be in use until week 45. Collection by arrangement. Iedpfjxnacfox Acujbc

Condition: used, mileage: 448,556 km, Year of construction: 2008, Serial number: YV2JSW0C08A67xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21171 Truck Specifications: Model year: 2008 EU approved until: 31.01.2026 Mileage: 448,556 km I-Shift automatic transmission Power: 480 hp / 353 kW Driveline: 6x2 Euro 4 engine Front suspension: steel Rear suspension: air Tires (see pictures) Total flatbed length (fully extended): 7.442 m Hydraulic extension: 1.5 m Foldable side panels Engine fault code displayed (see image) Central lubrication Air conditioning Radio Extra lighting Crane Specifications: Model year: 2008, 370.11/8S Certified until: 05/2026 All joints have had bearings replaced 8 hydraulic extensions Ibedpfx Acew Sc Rujujc 1 manual extension Winch disconnected (not working) 4 outriggers Remote control Ready for delivery Description:Volvo FM480 crane truck with 37 tm Effer crane, both from 2008, for sale.The crane has recently had all joint bearings replaced and is ready for use. The winch is disconnected due to malfunction. A motor fault code is shown on the truck display (see picture). According to the owner, the truck otherwise functions as it should. Some wear and tear is expected, and minor repairs may be needed.Ready for delivery. Km: 448556 HK: 480 Technical approved: Yes EU-approved until: 31.01.2026 Own weight: 18000 Total Weight: 28000 Payload: 9925 Width: 255 Length: 1040 Euro: 4 Model: FM480 Gearbox: Automatic

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1400 mm z-travel 1500 mm Control Heidenhain TNC 426 total power requirement 30 kW Ibjdpfx Acsxnq Dgeuoc

Condition: used, Dear Sirs, Iodpfx Acsp Dhbjujbc We offer you modular systems of small crane systems of the companies "DEMAG" and "ABUS" used, partly as good as new, at favourable conditions. The systems are tailored to your needs. In case of inquiries, please tell us whether you want to carry out a linear or area-wide transport. Furthermore, we need your information on the load capacity, crane girder and track lengths, suspension distances, roof pitches and type of ceiling construction. Please tell us your lifting problems. Furthermore, we can offer you the electric chain hoists at favorable conditions.

Condition: good (used), mileage: 611 km, color: orange, lifting height: 6,500 mm, Year of construction: 2006, operating hours: 4,225 h, CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information Boki Kiefer HY1251 with Palfinger PK 2700 A Iodpfxowakzrs Acuebc * 2006 * Diesel * 4225 working hours * 611 kilometers * 6.5 meters hook height * 5 meters horizontal range * Load moment 2.6 tons/m * 2370 kg own weight * equipped with tipper body * including crane book and other documents

Condition: good (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane Isdpfx Asxmi Arocujbc -Manufacturer: Demag, pillar jib crane load capacity 315 kg -Base plate: 380 x 380 mm -Thrust: 2,500 mm -Total height: 2,530 mm -Hook height: 1,325 mm -Chain hoist: DEMAG type DC-Pro 5 315 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 1.9 m/min -Transport dimensions: 800/2810/H750 mm -Own weight: 306 kg

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley Isdpfx Aexnvq Eecuobc • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: used, Year of construction: 2003, Travel paths (X/Y/Z): 3,000x3,000x1,200 mm, 60-position SK50 tool changer, automatic angle head, rotary table, control: HEIDENHAIN iTNC 530, 1 band filter system KNOLL PF 100/1000, year of manufacture: 2003, 1 chip conveyor Ibedsxnak Njpfx Acuec

Condition: used, Year of construction: 2000, x-travel 6000 mm y-travel 1600 mm Isdpjxmaqyofx Acuebc z-travel 1300 mm control FIDIA C20 /4H-SB tool taper SK50 spindle turning speed range 22 - 4000 U/min SHW – UFZ5 Year of manufacture: 2000 Specifications X-axis 6000 mm Y-axis 1600 mm (stroke with vertical head rotated 1900 mm) Z-axis 1300 mm Orthogonal head 2 axes, indexed 1° Automatically swivelling milling head holder (rear) 360x1 degree Automatically swivelling milling head holder (front) 180x1 degree Control: Fidia - C20 / 4H-SB SK 50 - DIN 69871 Infinitely variable feed range; X-axis: 2–12,000 mm/min. Y-axis: 2–18,000 mm/min. Z-axis: 2–18,000 mm/min. Rapid traverse; X-axis: 12,000 mm/min. Y-axis: 18,000 mm/min. Z-axis: 18,000 mm/min. Spindle/auto. Milling head: Speed 22 - 4,000 rpm Torque max. 1180 Nm Total current load: approx. 50 kVA/80 A. Without clamping plate Without chip conveyor

Condition: good (used), Year of construction: 2006, operating hours: 33,044 h, functionality: fully functional, machine/vehicle number: 86624, travel distance X-axis: 3,500 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, mount diameter: 40 mm, total width: 4,000 mm, total height: 3,400 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 600 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, overall weight: 20,000 kg, number of slots in tool magazine: 36, TECHNICAL DATA & EQUIPMENT: Operating voltage: 3 x 400 V Frequency: 50 Hz Max. rated current: 100 A Connection: 55 kVA Table with 5 T-slots Note: machine vices shown in the photos are not included Includes 36-position tool changer, chip conveyor, and coolant system Ibjdexm S Ikspfx Acujc COLLECTION NOTES: Collection must be definitively arranged between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: used, mileage: 401,000 km, Year of construction: 2006, Serial number: ZCFA75B020248xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20395 Specifications: Km: Approx. 401,000 Transmission: Manual Tires (see pictures) 4x2 Winch Length of plane: Approx. 4.8 m 150 hp Palfinger PK5200 crane from 1991 Crane diagram 3 seats Radio/CD Air conditioning/AC Service is done by owner Ready for delivery Description:Iveco 75E15 crane truck with winch.The truck is EU approved and from 2006.5.2 t/m Palfinger crane from 1991. Km: 401000 HK: 149 Technical approved: Yes EU-approved until: 11.02.2026 Own weight: 5530 Iedpfx Ajwi Ryajcuebc Total Weight: 7490 Payload: 1885 Width: 245 Length: 798 Euro: 3 Gearbox: Manual

Condition: good (used), Adjustable traverse, crane traverse, indoor crane, crane hook traverse, load traverse, heavy-duty traverse -Crane traverse: heavy-duty traverse -Carrier: IPB 550 / HEB 550 -Dimensions: see photo technical drawing -Transport dimensions: 7220/920/H1015 mm -Own weight: 2100 kg Isdpfx Acslpi Tisujbc

Condition: good (used), mileage: 53,999 km, color: red, lifting height: 32,000 mm, Year of construction: 1998, operating hours: 11,151 h, Drive: Wheel Empty weight: 7.490 kg Lifting capacity: 1.000 kg CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information Bocker AK 32/1000 * 1998 * Diesel drive * 11151 working hours * Remote control * 32-meter working height * 23-meter horizontal reach * 1000 kg lifting capacity * 7490 kg net weight * Includes documents Ijdpfx Acexlqxreuebc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 5,000 rpm, Used STS moving column milling machine model Performance with: - X-axis travel 6000 mm - Y-axis travel 1200 mm - Z-axis travel 2000 mm - Selca 4045D CNC unit - 2 clamping tables Ijdpfoxn Axisx Acuebc - Table size each: 3500 x 2000 mm - Automatic head 1°x1° - Spindle speed: 5000 rpm - Tool magazine with 40 positions - OMR rotary table, full 4th axis, 1000 x 1000 mm - High-pressure coolant system through spindle: 20 bar - Standard accessories included Free 12/24 month payment extension

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system Ibsdpfx Acjxmr Uqeujc • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: used, functionality: fully functional, Year of construction: 2012, For sale: Electric Overhead Travelling Crane 10 T (AT-101, 2012) Ibodpfx Acsxm Tr Dousc Condition: Very good, well-maintained, and technically sound. Reliable electric overhead travelling crane (Electric Hoist Type AT-101) designed for lifting and transporting heavy loads in manufacturing and storage facilities. Technical specifications: Model: Electric Hoist Type AT-101 Lifting capacity: 10 tons Lifting height: 12 m Lifting speed: 8 m/min Travel speed: 20 m/min Power supply: 380 V Duty cycle: 25% ED (short-term periodic duty) Year of manufacture: 2012 Application: Electric overhead travelling crane designed for lifting, transporting, and positioning heavy loads, equipment, or metal blanks. Suitable for use in: - manufacturing workshops, - mechanical repair shops, - warehouses and logistics centers, - metal processing lines. If you have any further questions, please do not hesitate to contact us.

Condition: used, mileage: 820,000 km, Year of construction: 2005, Serial number: YS2P6X2000200xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21454 Specifications: EU-approved until 30.07.2026 2005 model Approx. 820,000 km Manual gearbox Tires (see pictures) 20T hooklift Palfinger 23 t/m crane from 1999 Support legs Length: 900 cm Width: 250 cm Wheelbase: 490 / 134 cm Curb weight: 15,550 kg 6x2 340 hp Rotating warning bar Tow hitch Rearview camera Radio/CD Air conditioning Description:Scania P340 hooklift/crane truck from 2005.Equipped with a Palfinger 23 t/m crane from 1999. The main cylinder has a leak.Flatbed and container can be included at an additional cost.Service history available.Available for prompt delivery. Km: 820000 HK: 340 Technical approved: Yes EU-approved until: 30.07.2026 Isdpfx Aexg Abnecujbc Own weight: 15550 Total Weight: 29000 Payload: 13375 Width: 250 Length: 900 Euro: 3 Model: P340 Gearbox: Manual

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Ijdpfjvl Dl Aox Acuobc Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), mileage: 119,242 km, color: blue, lifting height: 32,000 mm, Year of construction: 2006, operating hours: 6,761 h, Drivetrain Drive: Wheel Weights Empty weight: 7.490 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Ibedpfx Acsxlpuxsusc Other information Delivery terms: EXW Latest inspection: 2024-05-10 Production country: DE Additional information Please contact Vink Machinery for more information Bocker AK 32/1500 * 2006 * Diesel drive * 6761 km * 119,242 km * 32-meter working height * 26.5-meter horizontal reach * 1500 kg * Winch and remote control replaced in 2020 * 7490 kg net weight * Includes documents