Used Crane Profile for sale (10,625)

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Bwjdpsu Eviqofx Aknou Gluing System: EVA Hotmelt

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Model: 925 Rondomat Year: 1992 Serial number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data Bsdpfx Akjn Ut Slenowu Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Relief angle for back relief: 15 - 45 degrees Axial: 0 - 10 degrees Cooling liquid

Condition: new, functionality: fully functional, Year of construction: 2025, 4 double-girder overhead cranes, in new condition rated load: 2 x 6.3 tons span: 16,560 mm lifting height: 6 m lifting speed: 5 and 0.8 m/min Bwodpfsz Hmgljx Aknou trolley travel speed: 2 - 20 m/min crane travel speed: 3.2 - 32 m/min radio-controlled remote control (tandem operation between the cranes) year of manufacture: 2025 voltage: 400V

Condition: excellent (used), functionality: fully functional, 8 large, high-power DEMAG travel drives complete with gearbox and travel wheel / DRS wheel block for crane bridge From large DEMAG spare parts stock, see also my other offers Low hours, very good condition, offered due to dismantling of factory hall Motor: ZBF100 A4 B050 Gearbox: ADK70 QD Wheel: DRS 315 (manufacturer's new price approx. €3,000.00 net per unit) Price: €4,490.00 each, complete For purchase of 8 units: €3,490.00 each net Bwjdpfx Aksv T Tf Usnou Info: We have over 20,000 DEMAG items in stock! Check my other offers from stock as well!

Condition: used, Technical details: weight: Preis wird nach kg berechnet kg Various crane runways Pos. 1: Columns for crane runway 6x double T-beams L: 4.66 metres x W: 22 cm x H: 54.5 cm 1x double T-beam L: 4,71 meter x W: 21,5 cm x H: 55 cm Pos. 2: Crane runway 4x T-beams L: 7.16 metres x W: 22 cm x H: 54.5 cm 2x T-beams L: 6.25 metres x W: 22 cm x H: 54.5 cm 2x T-beam end pieces with stopper L: 6.93 metres x W: 22 cm x H: 54.5 cm Pos. 3: Crane runway 4x T-beams L: 5.90 metres x W: 21.5 cm x H: 55 cm 2x T-beams L: 4.10 metres x W: 21.5 cm x H: 55 cm 2x end pieces with stopper L: 6.05 metres x W: 21.5 cm x H: 55 cm Pos 5: Bwedpfxsu Nvkvo Aknou 10 pieces support beam length 6.400mm with TT profile 180 x 180mm weight 2420 kg Subject to prior sale. If still available. Please ask exactly for which beams you are interested. Subject to prior sale. If still available. Please enquire exactly which girders you are interested in. *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, total length: 16,240 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, 2 Abus overhead cranes – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2012 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 2m/M5 Dimensions – Span: 16,240 mm center-to-center – Installation height: 560 mm – Wheelset width including bumpers: 3,210 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Dead weight: 3,690 kg Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired push-button panel with load display – Crane manual available: yes – Last maintenance: May 2026 – Condition: in good condition, dismantled but operational – Dismantled: no; October 2026 – 2 units available Steel structure including floor slabs and column-mounted slewing crane – Length: 32.5 m (approx.) – Year of construction: 2012 – Condition: in good condition – Dismantled: no; October 2026 Dimensions – Total length: 32.5 m (approx.) – Width (center-to-center) of crane runway: 16,240 mm – Total width: 16.7 m (approx.) – Distance from floor to top of 50×30 mm beam: 6,200 mm (approx.) – Column spacing: to be confirmed – Crane runway: HEA 260 – Columns: HEA 260 – Crane beam: 50×30 mm Includes Bwsdpfx Akez Erulsnou – 16 x HEA 260 columns, height approx. 5,914 mm – Cross-braces – Floor slab measuring approx. 4.5 x 16 m – Floor slab measuring approx. 4.0 x 6 m – Column-mounted slewing crane with a lifting capacity of 1.6 tonnes

Condition: like new (used), functionality: fully functional, Year of construction: 2019, 1x BKRS gantry crane Rated load: 50,000 kg Span: 21.5 m Cantilever: 2 x 6 m Lifting height above rail: 10 m Hook travel: 45 m Radio remote control Cable drum suitable for 110 m Complete with crane rail UIC60 length: 2x 110 m Bwedpfx Aeyx Dlheknsu The crane was used for a tunnel boring project Demag components

Condition: excellent (used), mileage: 410,418 km, first registration: 11/2019, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 10,370 mm, total width: 2,550 mm, loading space length: 6,300 mm, loading space width: 2,480 mm, Year of construction: 2019, Equipment: ABS, EBS, crane, electric window regulation, parking heater, seat heater, trailer coupling, = Additional options and accessories = - Additional steering axle - Beacon(s) - Dynamic stability control - Height adjustable driver's seat - Power take-off (PTO) - PTO - Sun visor - Toolbox = Remarks = Drivetrain PTO: 2011 uur Crane Number of hydraulic extensions: 5 Remote control: ✓ Load Hook: ✓ Bsdpfx Akjz H Ucnjnjwu Very nice Volvo FH 540 from 2019 with a Hiab 55tm crane, In addition to the options already mentioned, it features: -2 beds -Refrigerator -Air conditioning -Camera system -Hiab X-Hipro 55tm crane -5x extendable -Remote control Cargo bed dimensions: L: 6.30 B:2.48 H:1.12 (measured from the ground) German car directly from the first owner = More information = Axle configuration Tyre profile: 50% Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 19.951 kg Functional Crane: Hiab X-Hipro 558 EP-5, year of manufacture 2018, behind the cab Height of cargo floor: 112 cm Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. Bwedpfjw Nxyysx Aknsu KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: excellent (used), functionality: fully functional, DEMAG 635 H13 hoist, complete Load capacity 10,000 kg, 4/1 reeving Good condition Free delivery within Germany! Bedsv T Tigepfx Aknswu Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated upon prior arrangement. - The machine has undergone subsequent technical modifications. As a result, a second, higher speed is available for processing smaller pipe dimensions. - A protective frame was manufactured to protect the machine, which helps to minimize external damage. The protective frame also features two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 setpoint values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of supply includes a wide selection of tools for various applications, including: Round tubes Flat bars for heavy-duty and lightweight arbors Square profiles Rectangular tubes T-profiles Angle iron Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). Bedpfx Asz Hcp Njknowu - The machine will only be sold together with the complete set of tools. - The price is ex-works. The disassembly, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned freight forwarder. Technical specifications according to available documentation. Subject to prior sale. Seller: Firma GERO Karl Gerke e.K. 48629 Metelen, DE

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 14/805714-2, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,720 mm, load capacity: 2,000 kg, lifting height: 6,000 mm, chain length: 6,000 mm, Equipment: documentation/manual, Abus 2,000 KG single-girder overhead crane in very good condition. Bodez H Iinjpfx Aknowu - Span: 7,200 mm center-to-center. - Lifting capacity: 2,000 KG - Lifting height: 6 m - Year of manufacture: 1988 - Control: wired Delivery, customization, installation, inspection, and commissioning are all possible upon request. Is this crane not exactly what you are looking for? We have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our inventory is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Traveling cable festoons Keywords: overhead crane, hall crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: used, Year of construction: 2007, Truck loading crane / loading crane / crane PM series 12.5 Year of construction: 2007 2x hydraulically extendable Equipped with remote control. With 5th function and rotator. Capacities: Bwedpfx Aksz Hpa Uonou 2710 kg at 4.2 meters 1800 kg at 6.1 meters 1310 kg over 8.1 meters Cevoman bvba. Lenskendijk 5 2200 Herentals Belgium

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Length: 36.50 m Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Drive motor 1 Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Bsdpfx Aoz Hlx Hoknowu Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Condition: used, 1x gantry crane Working load: 2 x 10,000 = 20,000 kg Span: 24 m Cantilever: 1 x 3 m Lifting height above rail: approx. 8 m Hook travel: 8 m Bodpoyx Dyfsfx Aknswu Radio control Complete with crane rail

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 Bodpfx Ajxak D Rsknswu - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: used, mileage: 1,001 km, first registration: 01/1987, empty load weight: 280 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 1987, Equipment: crane, Vehicle location: Bovenden. Includes Kinshofer rotating head! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Bwedjz H Tv Topfx Akneu

Condition: used, functionality: fully functional, Year of construction: 1990, Type: Liebherr 35 K Factory No.: LA13963 Undercarriage Boom, max. (m) Lifting capacity: 33 m / 1 ton Boom, min. (m): 11.40 m Hook height: 11.7 / 20 / 22-26 m Maximum lifting capacity at: 3.50 t Ground footprint (outriggers): 3.8 x 3.8 m Slewing radius: 3.00 m Power supply: 63 A (22.6 kVA) "Transport and assembly requirements (approx.) (up to 50 km transport radius)": Loading crane, axle 1 truck + trailer Bwedpsz Hu N Usfx Aknsu Counterweights (tons) for transport: 17.00 t Year of manufacture: 1990

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of any bankruptcy claims: Universal profiling steel shear with hole punch, Mubea Type KBL 11 N Bodjz Hu E Aepfx Aknowu Year of manufacture 1978 Pressing force 35 tons Reach 320 mm Punching round holes up to 33 mm in diameter Cutting square sections up to 30 x 30 mm Cutting flat steel 100 x 10 mm Cutting angle iron 130 x 13 mm Cutting T-profiles 60 x 8 mm Various hole punches Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works.

Condition: used, functionality: fully functional, maximum load weight: 4,000 kg, Year of construction: 1999, machine/vehicle number: 18843, Swivel crane Maximum boom length (m) / Lifting capacity: 33 meters / 1 ton Minimum boom length (m): 25.5 m Hook height: 11.7/15/17/20-26 m Bodpfxjz Hk H Ne Aknowu Maximum lifting capacity at reach: 4 t Ground footprint (outriggers): 3.8 x 3.8 m Slewing radius: 2.5 m Power supply: 63 A frequency converter (21 kVA) "Transport and assembly requirements (approx.): Loading crane axle, 1 truck + trailer (up to 50 km transport radius)" Counterweights (tons) for transport: 18.98 t Year of manufacture: 1999

Condition: used, Year of construction: 2013, operating hours: 10,000 h, Year of manufacture: 2013 Field of application: Construction Terex RT100 RT Rough Terrain Crane 4x4x4 Bj 2013 Bwodpfx Aoz H U Svskneu 53 m Main Boom 90 ton / 3 m Cummins QSB 6.7 engine CE Declaration

Condition: good (used), Year of construction: 2020, Year of manufacture: 2020 Technical condition: good Optical condition: good HIAB X-HIPRO 358 E-6 COMPLETE LOADING CRANE – 6-SECTION HYDRAULIC EXTENSION – REMOTE CONTROL Well-maintained and fully equipped HIAB X-HiPro 358 E-6 loading crane, year of manufacture 2019. The crane has a 6-section hydraulic extension and features additional 5th and 6th hydraulic functions extending to the crane tip. This allows hydraulic attachments such as rotators, grapples, or other hydraulic tools to be connected and operated. Complete with remote control, hydraulic tank, separate rear outrigger set, and crane documentation. GENERAL DATA Manufacturer: HIAB Type: X-HiPro 358 E-6 Year of manufacture: 2019 Serial number: 3580234 Design: E-6 Hydraulic extensions: 6-section Operation: Remote control Additional hydraulic functions: 5th and 6th function Suitable for: Rotator / Grapple / hydraulic attachments Outriggers: Rotatable support legs CRANE DESIGN The HIAB X-HiPro 358 E-6 is a powerful loading crane for professional transport, construction, assembly, and lifting operations. With its 6 hydraulic extensions, the crane offers a large hydraulic reach. The additional hydraulic functions make this crane particularly interesting for companies that want to use various hydraulic attachments. Suitable for, among other things: - Transport and crane operations - Construction and assembly work Bwjdpfsz H Tkkex Aknsu - Loading and unloading of machines and materials - Working with hydraulic rotators - Working with grapples - Using various hydraulic attachments - Mounting on a suitable truck chassis REMOTE CONTROL The crane is equipped with a HIAB remote control. This allows the crane operator to operate the crane from a safe position and have an optimal view of the load and the work area during operations. Complete, including charger for the remote control. 5TH AND 6TH HYDRAULIC FUNCTION The crane has an additional 5th and 6th hydraulic function. This allows various hydraulic attachments to be operated directly via the crane, for example: Hydraulic rotator – grapple – clamshell grapple – stone grapple – pallet fork or other hydraulic tools. COMPLETE REAR OUTRIGGER SET The crane comes with a complete separate HIAB rear outrigger set. Type: 458-8125 Year of manufacture: 2020 When properly installed, the additional rear outrigger provides high stability of the vehicle during crane operations. HYDRAULIC SYSTEM Delivered complete with: Hydraulic tank Mounting brackets for hydraulic tank Hydraulic equipment for the crane 5th and 6th hydraulic additional function This means that many important components are already available for mounting the crane on a suitable truck chassis. INSPECTION & DOCUMENTATION The crane is delivered with: Valid ABOMA / TCVT inspection Crane papers / documentation*

Condition: excellent (used), mileage: 63,645 km, power: 552 kW (750.51 HP), first registration: 03/2024, fuel type: diesel, tire condition: 70 %, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,100 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2024, Equipment: ABS, air conditioning, crane, cruise control, retarder, trailer coupling, = Additional options and accessories = - Adaptive cruise control - Gullet - Heated windshield - Lane assist - Paddle shifters Bwjdpfx Akjz D E Hrsneu - Power take-off (PTO) - PTO - Sun visor = Remarks = Drivetrain PTO: 2714 uur Crane Hours: 2714 uur Number of hydraulic extensions: 15 Remote control: ✓ Load Hook: ✓ Winch: ✓ = More information = Axle configuration Tyre profile: 70% Front axle 1: Max. axle load: 10000 kg; Steering Front axle 2: Max. axle load: 10000 kg; Steering Rear axle 1: Double wheels; Max. axle load: 9500 kg; Reduction: hub reduction Rear axle 2: Double wheels; Max. axle load: 9500 kg; Reduction: hub reduction Weights Empty weight: 30.900 kg Functional Crane: Effer 1405, year of manufacture 2023 Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: like new (used), functionality: fully functional, Year of construction: 2018, KS Schulten glasslifter KS-280, like new. Made in Germany. Bwodpfxovx T Exs Akneu

Condition: excellent (used), mileage: 192,053 km, color: blue, lifting height: 30,400 mm, axle configuration: 4x4, Year of construction: 1998, operating hours: 25,341 h, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 35.850 kg Functional Lifting capacity: 5.000 kg Dimensions of cargo space: 1280 x 260 x 400 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Counterweights Bedezd T R Ijpfx Aknjwu - Hook blocks = Remarks = Spierings SK365-AT3 * 1998 * 25,341 operating hours * Diesel and 400 Volt drive * 3 axles * Manual transmission * 6x6x4 drive/steering * Lifting capacity 5,000 kg * Point load 1,700 kg * 33.4 lifting height * 30.4 meters horizontal reach * 192,053 km * Includes documents and maintenance history