Used Trim Saw for sale (7,476)

Condition: used, Year of construction: 2007, saw blade diameter 370 mm capacity 90 degrees: flat 200x100 mm capacity 90 degrees: round 130 mm 34/68 UpM total power requirement 2,6 kW height of material-table 900 mm Dwsdpfx Aezr Rqbspwsa dimensions of the machine ca. 1335x865x2175 m weight of the machine ca. 430 kg

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Dwedjzquywjpfx Apwoa Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2019, condition: as good as new (ex-display), Used Machine Year of Manufacture: 2019 Condition: Display model, like new Features and Technical Specifications: Dwedpszrpxwsfx Apwea - Battery voltage: 18 V - Saw blade diameter: 160 mm - Bore: 20 mm - Cutting depth: up to 57 mm at 90° up to 40.5 mm at 45° - Tilt range: -1° to 48° - No-load speed: 4,850 rpm - Dust extraction port - Weight: approx. 4.5 kg

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg Dsdpfjzr I E Aox Apwjwa ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW Dodpfezr I Abjx Apwewa - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), CATALOG NUMBER 7751 Djdpfezr Izkex Apwjwa TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: new, CATALOG NUMBER RE041 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operation only with ⌀300, 350 mm blade) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Main spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 2000 mm - Cutting width with rip fence 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence settable at 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm Dwedpfx Aezr Ix Nopwsa - Top extraction port diameter ⌀80 mm - Bottom extraction port diameter ⌀100 mm - Weight 620 kg - Machine dimensions (L/W/H) 2255x3460x1450mm Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal, double-column bandsaw designed for professional use in metalworking. It is suitable for precisely cutting solid materials, pipes, and profiles and impresses with its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously variable cutting speed of 17 to 110 m/min, it can be used in a variety of applications. The powerful 7.5 kW sawing motor, hydraulic workpiece clamping, and coolant system with 150 liters ensure reliable and economical operation. With a machine weight of 2,100 kg, the HBP 430N offers high stability and is ideal for daily use in metalworking, steel construction, and mechanical engineering companies. Technical Data HBP 430 N Working range 90° round Ø 430 mm Working range 90° flat 600 × 430 mm Dwodpjzq S Ncofx Apwja Working range 45° flat 320 × 430 mm Smallest material dimension 15 mm / 10 × 15 mm Smallest section length 10 mm Remaining piece length approx. 40 mm Cutting speed 17–110 m/min Coolant tank 150 l Belt tension 80 bar Sawing motor 7.5 kW Hydraulic motor 2.2 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse 35 A Cable cross-section min. 4 × 6 mm² Saw band dimension 5,800 × 54 × 1.3 mm Machine weight 2,100 kg Material support height 700 mm

Condition: used, Year of construction: 2005, machine/vehicle number: 0102-260023, The Behringer HBP 313 is a horizontal, double-column band saw for industrial metalworking. It is used for the precise cutting of solid materials, tubes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is continuously adjustable from 20 to 140 m/min. A coolant system with a 60-liter capacity and a band tension of 60 bar ensure high cutting quality and a long service life of the saw blade. Dwedpfx Aezq S Ilspwsa The machine is powered by a 4.0 kW sawing motor. The electrical connection is 400 V / 50 Hz, and the control system operates with 24 V DC. With a weight of 1,960 kg, the HBP 313 ensures low-vibration operation and high processing accuracy. Technical data Working area Ø 310 mm / 500 × 300 mm Smallest material dimensions Ø 10 mm / 10 × 8 mm Smallest section length 8 mm Remaining piece length from 10 mm Cutting speed 20–140 m/min Coolant 60 l Band tension 60 bar Sawing motor 4.0 kW Hydraulic motor 1.5 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 7 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 14 A Fuse rating 25 A Machine weight 1,960 kg Material support height 800 mm

Condition: used, Year of construction: 2012, machine/vehicle number: 0102-260024, The Behringer HBP 313N is a horizontal, double-column bandsaw for industrial metalworking. It is used for the precise cutting of solid materials, pipes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for use in both single-piece and series production. Dsdpjzq S Hnsfx Apwswa The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is adjustable between 20 and 140 m/min. A coolant system with a 60-liter capacity ensures good cooling and a long service life for the saw blade. The machine is powered by a 4.0 kW saw motor. The electrical connection is 400 V / 50 Hz, and the control system operates at 24 V DC. With a machine weight of 1,960 kg, the HBP 313N offers high stability and ensures precise machining of metal materials. Technical specifications: Saw blade dimensions 5,000 x 34 x 1.1 mm Working area Ø 310 mm / 500 × 300 mm Cutting speed 20–140 m/min Coolant 60 l Belt tension 60 bar Saw motor 4.0 kW Connected load approx. 7 kW Mains connection 400 V, 50 Hz Control voltage 24 V DC Machine weight 1,960 kg Material support height 800 mm

Condition: excellent (used), Year of construction: 1998, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Sled length: 3400 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 145 mm Scoring saw: yes With electromotive height and lateral adjustment Rapido scoring system for stepless cutting width adjustment Adjustment range 2.8 - 3.8 mm including scoring saw blade Height adjustment of saw blade: electric Swivel adjustment of saw blade: electric Adjustment of rip fence: manual Adjustment of crosscut fence: manual Display of saw blade angle: digital display Display of rip fence: scale Display of crosscut line: scale Dedjzq Srkjpfx Apwowa Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Palin parallel cutting device as an add-on unit with miter adjustment with display on the sliding table Dust extraction connection: 80 and 120 mm Machine length: 3400 mm Machine width: 2200 mm Weight: 1200 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Dedpfxjy I Da Rj Apwewa Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: new, Year of construction: 2023, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height 860 mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Display Model Current list price: 55,910 euros Fully automatic band saws with a two-column guide system for production cuts, particularly in materials that are difficult to machine and solid stock. With this machine, MEP offers you a machine that is at the highest technical level and, thanks to the use of the highest-quality materials, features an unmatched, robust, and torsionally rigid structure. An extremely robust saw frame made of gray cast iron provides the necessary stability, which leads to impressive cutting results, and the sturdy gray cast iron columns on which the saw frame glides via preloaded linear guides ensure Dwsdpfx Apjlf Tu Uswsa ensure the highest cutting precision even under maximum load. The modern machine control system (MEP NC 5.0) offers the user maximum ease of operation and ensures trouble-free operation. (Monitoring/Evaluation/Correction in real time) MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under all conditions. > The control system allows for the storage of up to 100 cutting programs, each with different quantities and lengths, and minimizes programming time for frequently executed jobs. > The automatically detected starting position of the saw head reduces the setup time. > The saw headâ??s feed via linear guides driven by hydraulic cylinders with preloaded ball screws ensures reduction of mechanical vibrations during cutting and greater stability. > The automatic alignment of the front saw blade guide head based on the dimensions of the bars to be cut reduces processing time. > Saw blade tension is controlled by the brushless motor and is constantly monitored and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system, with a 600 mm stroke, is repeatable and cuts all lengths. > The vertical roller pair allows for holding and aligning any type of bar or bundle that is fed into the machine. > The vector drive for stepless adjustment of the blade speed from 15 to 100 m/min enables the cutting of any material. > The motorized chip conveyor can be mounted to the right or left of the cutting area . FEATURES: Fully automatic control â?? NC 5.0 - Innovative (Windows CE-based) touchscreen control with additional soft- touch buttons for frequently used functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via a servo valve , constant monitoring of the preselected torque 4, and with precise feed rate adjustment in millimeters per minute 5 -Adjustment/preselection of the continuously variable band speed in m/min. -Band saw tension with tension monitoring and display via an electronic converter -Automatic detection of the start of the cut -Large 7" color touchscreen for displaying and selecting all machine functions and parameters, and programming in seconds. Display of detailed alarm and error messages -Numerous special functions, including executing various lengths and quantities (10 programs) as a sequence, clean cut, step-by-step execution, and much more. -Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel -Carbide band guides for maximum cutting precision, hinged for easy saw band replacement -Large, adjustable cast steel idler ...

Condition: excellent (used), Catalog number: 7938 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic pressure - blade guard - pneumatic blade extension - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 7.5kW - dust extraction nozzle diameter: 120mm - table dimensions (length/width): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table height: 900mm - roller table width: 510mm - overall machine dimensions (length/width/height, without table): 1200x640x1280mm - weight approximately 500kg ADVANTAGES - Made in Poland - Original DTR documentation - 2 roller tables - Pneumatic blade adjustment - Used saw, very good condition Net price: 14500 PLN Dodpozrxgdsfx Apwowa Net price: 3455 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number: 8051 TECHNICAL DATA - max. blade diameter: 300mm - spindle diameter: 30mm - blade guards: 2 pcs - pneumatic cutting (blade movement: up/down) - sawing units adjustable at a 45° angle Dwsdpfjzrwrfex Apwoa - manual adjustment of sawing unit spacing - min. cutting length at 90°: 280mm - max. cutting length at 90°: 3020mm - cutting height at 90 degrees: 90mm - pneumatic clamps: 2 pcs - control pedal - material support - main motor: 2 x 2kW - dust extraction nozzle diameter: 2 x 60mm - dimensions (L/W/H): 3520x900x1450mm - weight approx. 500kg ADVANTAGES – unpainted – tilting sawing units – DTR documentation Net price: 15900 PLN Net price: 3790 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations) – used saw, very good condition

Condition: excellent (used), CATALOGUE NUMBER 8066 Technical specifications: Dwedpezrwflsfx Apwja - max. disc diameter 400mm - disc bore diameter 30mm - disc guard - max. cutting height 110mm - max. cutting width 700mm - possibility of angled cutting in the vertical plane +90°/-90° (arm adjustment or disc adjustment) - possibility of arm rotation right/left - motor 3kW - table dimensions 1180x600mm - dust extraction nozzle diameter 60mm, 120mm - dimensions (L/W/H) 1340x1180x1600mm - weight 200kg Advantages: - Made in Italy - Unpainted - Very good condition - Used saw Net price: 8900 PLN Net price: 2120 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8064 TECHNICAL DATA - Max. diameter of the main saw blade with a scoring blade: 350mm - Max. cutting height: 130mm - Main blade adjustable up/down + angle, manually - Spindle diameter: 30mm - With a crosscut table - Cutting length on the table: 3200mm - Cutting width adjustable electrically with a fence: 1320mm - With a side table Dedpfxszrwbtj Apwjwa - With a scoring blade - Max. diameter of the scoring blade: 120mm - Spindle diameter: 20mm - Main motor: 7.5kW - 3 types of spindle speeds: 3000/4000/5000 rpm - Diameter of the dust extraction outlet: 120mm - Dimensions of the table with extension and widening: 1870x1440mm - Blade guard - Dimensions (L/W/H): 4100x3400x1500mm - Weight: 860kg ADVANTAGES - Italian made - Cutting width adjustable electrically - With a scoring blade - Unpainted - DTR and CE documentation - Used saw, very good condition Net price: 26900 PLN Net price: 6405 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8062 Technical specifications: - max. main blade diameter 500mm - main blade adjustable up/down and at an angle, electrically - spindle diameter 30mm - spindle locking - with a crosscut fence - with a side fence + protractor - crosscut fence length 3000mm - cutting width adjustable with an electric guide from the upper control panel, 1550mm - with a side fence and an angle-adjustable guide - with a scoring saw - max. scoring saw diameter 120mm - scoring saw motor 0.75kW - main motor 6kW - blade adjustment up/down adjustable from the upper control panel - angle adjustment adjustable from the upper control panel - 2 types of rotation speeds - pressure beam - START/STOP switch in the crosscut table - protractor - table extension 2000x1530mm - large blade guard - dust extraction nozzle diameter 100mm, 120mm Dwsdpfx Aezrwbaepwoa - dimensions L/W/H 3600x3800x1600mm - weight approximately 1200kg Advantages: – Polish production – with a scoring saw – START/STOP switch in the crosscut table – pressure beam – original DTR documentation – unpainted – used saw, very good condition Net price: 29900 PLN Net price: 7120 EUR depending on the exchange rate of 4.20 EUR (Prices may change due to larger fluctuations)

Condition: excellent (used), Catalogue number 7280 TECHNICAL DATA - track width: 340mm - shaft width: 400mm - max blade diameter: 350mm - blade bore diameter: 80mm - max cutting height: 120mm - table width with clearance: 700mm - table length: 1720mm from above: - pawls - metal slip pressure roller - pawls - metal slip pressure roller - shaft with saw blades - 2 pcs metal slip pressure rollers from below: - guide bar - metal slip roller - pawls - track - electric body lifting 0.55kW - central lubrication - variable feed speed control 1.5kW - main motor 37kW - dust extraction nozzle diameter: 200mm - overall dimensions (L/W/H): 1800x1670x1780mm - weight approx. 2500kg – German made – Used multi-blade saw, in very good condition Original photos Djdpozrub Defx Apwewa Net price: 76,900 PLN Net price: 18,300 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: new, Electrical voltage: 400 / 440 V Frequency: 50 / 60 Hz Number of phases: 3 / 3 phases Dwsdod R Uzzopfx Apwoa

Condition: used, power: 4 kW (5.44 HP), cutting height (max.): 145 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 3,600 rpm, rotational speed (min.): 2,800 rpm, total length: 2,350 mm, total width: 1,800 mm, total height: 1,700 mm, overall weight: 800 kg, Equipment: saw blade guard, No. 3276 Sliding table saw Kölle K 45 Used Max. saw blade diameter 400 mm Max. cutting height 145 mm Cutting width 1250 mm Motor power 4 kW Speeds 2800 / 3600 rpm Manual saw blade tilt 0° - 45° Manual cutting height adjustment Table size 1180 x 1150 mm LW Cross-cut table length 800 mm, extendable to approx. 1200 mm Stop rail 2000 mm long, with 1 stop Dwedpfx Aezbu Evspwea Adjustable overhead saw blade guard Transport dimensions approx. 2350 x 1800 x 1700 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 73433 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Dwodpjzhx A Rsfx Apwoa Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2015, Miter and crosscut saw with a maximum cutting height of 170 mm sturdy gray cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual feed quick miter adjustment up to 65° horizontally adjustable fixed stops lower saw blade guard, connectable to dust extraction Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees - 90 degrees Machine stand - Main switch with locking mechanism - Infeed roller conveyor Ro-St60, 3 meters, right-hand - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Djdszhx Adopfx Apwswa Heavy-duty length stop/roller conveyor mm - Scale on the rear upright, measuring gauge with magnifying glass and stop flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock, 54634 Bitburg - free loading - - immediately available -

Condition: like new (used), Year of construction: 2024, Wegoma double miter saw with 3-axis control Double miter saw DS140 Working length 4000 mm, hydropneumatic saw feed Pneumatic swivel 45°/90°/45° 4 clamping cylinders, pneumatic 2 carbide-tipped saw blades 500 x 80 mm Left saw head fixed, right saw head movable Digital display Positioning control EPS 220 For double miter saws, including EPS220 control for precise length positioning. With industrial touch panel 15 inches (dust and splash-proof) Display for manual input of cutting data or via data set integration - Ethernet connection 10/100 (TCP/IP) - USB interface - Data transfer via USB or network possible. Dwedpfxszhx A Ds Apwoa - Interface to measuring ruler incl. interface software. Incl. control cabinet, motor, and software licenses. - Short and long cut setting - Automatic cutting (can only be activated via software in conjunction with entry protection) Positioning electronics for stepless automatic swivel from 45° to 135° 4.00 92062530 Feed roller conveyor 3 meters for DS mounted on the mobile unit Machine immediately available Ex works

Condition: used, Year of construction: 2006, Max. cutting width: 5300 mm Max. cutting height, horizontal: 2100 mm Max. cutting height, vertical: 2240 mm Max. processing thickness: 80 mm Saw blade diameter: 300 mm Saw blade arbor: 30 mm Bottom support: fixed rollers Material support: flexible plastic slats Djdpfx Aszrmwwspwewa Small parts support: yes Measuring system: scale Swiveling saw head: manual Saw feed: manual Extraction: external extraction Locking of the saw beam: manual Weight approx.: 1000 kg Dimensions: 6660 x 1426 x 3015 mm Motor power: 5.5 kW Extraction diameter: 140 mm Location: Nattheim