Used Trough Chain Conveyors for sale (12,033)

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm Nsdpstp S E Ejfx Afzscl The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: VO 113812, conveyor belt width: 600 mm, conveyor belt speed: 816 mm/s, total length: 2,400 mm, total width: 2,500 mm, total height: 3,950 mm, inner radius: 500 mm, outer radius: 1,100 mm, power: 1.1 kW (1.50 HP), input voltage: 500 V, input frequency: 50 Hz, motor manufacturer: Movimot, Equipment: safety light barrier, type plate available, Vertical transport direction: Downwards Belt speed: 40 m/min Number of spirals: 3.25 (Entry South - Exit West) Running direction: Counterclockwise Entry height: 3,700 mm Exit height: 1,000 mm Inner radius: 500 mm Outer radius: 1,100 mm Angle at inner radius: 12.7 degrees Angle at outer radius: 6 degrees Lower section covers: Yes, plastic on lower run Frame material: Bare steel, coated RAL 5010 Side guide: 150 mm Ncodjw Niftopfx Afzjl 26.00 meters (belt length) JP-HDXL belt Belt width: 607 mm Color: Black Panel material: Nylon (PA6) Cross rods: Stainless steel, 6 mm in diameter Every 5th panel with TPU inserts Drive: Yes, SEW Movimot (see attachment) Gear motor Movimot (1 pc.) Speed control: None – single speed with potentiometer Motor protection: IP55 Motor frequency: 50-60Hz Motor voltage: 3x400-500V Photoelectric sensor & control cabinet were retrofitted (details on request) Collection in the Frankfurt am Main area must be organized by the buyer. (All information without guarantee)

Condition: ready for operation (used), Year of construction: 2021, Turns: 3.25, infeed: south, outfeed: West, infeed height: 3700mm, outfeed height: 1000mm, transport direction: downwards, max. belt speed: 40m/min, max. belt load: 45kg/m. Including an external control cabinet. Documentation available. On-site inspection is possible. Nodpfx Afjwz N T Ajzocl

Condition: like new (used), functionality: fully functional, Year of construction: 2016, Manufacturer: MB Conveyors Model: SM Year of manufacture: 2016 Drum hole diameter: 35 mm Technical condition: very good – as new! Ncedswb Epgjpfx Afzjl

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW Ncedpfxjufib Ro Afzel - Chain conveyor with pushers after moulder or resaw.

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/1800 x 340 mm - Parts pick-up 720 mm, ascending conveyor 1800 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Effective width = 340 mm Belt width = 410 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 650 mm, at 50° = 1,250 mm - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request FDA compliant belt Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Cut and oil resistant standard conveyor belt with smooth surface in green polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice. Njdpfetmty Ejx Afzjcl

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/2000 x 440 mm - Parts pick-up 720 mm, ascending conveyor 2000 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Useful width = 440 mm Belt width = 510 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz Ncsdjtmtzyspfx Afzel - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 750 mm, at 50° = 1,400 mm - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request FDA compliant belt Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Cut and oil resistant standard conveyor belt with smooth surface in green polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice.

Condition: excellent (used), Large selection of nice conveying direct from closed cheese factory. Ncsdeycm D Hopfx Afzjl

Condition: like new (used), Conveyor to take product from 3.25m down to 0.8m. 762mm belt width. Ncedpfx Afswac D Sjzol

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Nsdpfxsrq Eawo Afzecl

Condition: good (used), 6 hoppers / feeders with 40 m conveyor for asphalt plant Nodpoyba Uvsfx Afzocl

Condition: used, tank capacity: 200 l, GENERAL Equipment: disc valve Design type: horizontal Notes: 4-legged chassis made from V2A; internal dimensions at the top approx. 700 x 1105 mm; internal height approx. 360 mm; 1 tank with 2 dents; hand levers for the disc valves are missing Overall width: 750 mm Overall height: 1,020 mm Overall length: 1,250 mm Top: open Ncjdpsycli Uofx Afzel Location: Bremen Volume: 200 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used TANK Mounting: mobile frame Number of feet: 4 pcs EQUIPMENT Outlet: 35 mm Note: slight residues/adherences MATERIAL SPECIFICATION Feet material: stainless steel

Condition: new, Year of construction: 2014, functionality: fully functional, Sliding belt conveyor, deck conveyor, VHV Anlagenbau, year of manufacture 2014, usable width 1200 mm, good condition Technical data: Manufacturer: VHV Anlagenbau Type deck conveyor Year of manufacture: 2014 Drive power: 2.2 kW Conveyor speed: 0.42 m/s Conveyor volume: approx. 3 t/h (cardboard 0-200 mm) Axle distance: 34,050 mm / 8,670 mm Belt width: 1,200 mm Gradient: 0.0° / 48°/ 17° Transfer height: approx. 4130 mm Materials: cardboard, paper, film The conveyor belt is in good condition. Due to the segment design, it can be easily adjusted. A viewing is possible at any time. If you have any questions, please do not hesitate to contact us by phone from Monday to Thursday 8 a.m. to 2 p.m. and Friday 8 a.m. to 1 p.m. Njdpeybb D Esfx Afzscl Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 1985, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm -Dimensions: see photo and technical drawing Ncodpfeya Aiyex Afzjl -Transport dimensions: 600/550/H420 mm -Weight: 49 kg

Condition: used, Year of construction: 2005, Conveyor tower Solema Drying station 25 Year: 2005 Description: - Length of conveyor: 25 mtr Ncodpfx Afewx Ii Rezel - Delivery to the right

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2.050 mm - Used - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray Ncedpfsya H H Nox Afzol - Voltage fluctuations +/-5% - Location: in stock

Condition: used, Technical data: - GBT-2000 Ncedpfx Asya H H Ajfzjl - Working width 1.300 mm - Total width 1.470 mm - Length: 2.050 mm - Used - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray - Voltage fluctuations +/-5% - Location: in stock

Year of construction: 1994, condition: used, machine/vehicle number: 41094/30, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1.750 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW Ncsdsya H Hiepfx Afzel - Voltage fluctuations max. +/- 5% - Location: in stock

Year of construction: 2014, condition: used, machine/vehicle number: DB407803A, Technical data: - Manufacturer: Cefla - Type: TR 3000 Ncedpfx Afoyatdzozel - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: new, Year of construction: 2025, length in total nach Maß mm band width nach Maß mm Nodpfotq Duqox Afzocl conveying height nach Maß mm Our magnetic conveyor systems from the GERD WOLFF brand are a versatile solution for the efficient and damage-free transport of materials, including dust, shredded iron chips, and metal particles. - Contact-free transport – no direct contact between the magnetic carrier and the product or chips, preventing damage to the pallet and the conveyed material - Higher manufacturing costs due to permanently installed, high-performance neodymium magnets on the pallets - Flexible control options – via integrated, user-friendly control unit or connection to a CNC machine through a plug-in interface - High adaptability – can be tailored to specific requirements such as conveying angle, dimensions, and chip-carrying capacity - Particularly suitable for delicate or easily damaged materials - Robust construction for long service life in continuous industrial operation - Low maintenance requirements – rare and straightforward servicing - Ideal for industries requiring clean, gentle, and reliable material transport

Condition: new, Year of construction: 2025, length in total 4045 mm band width 235 mm conveying height 1200 mm Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Ncjdpotq Dynjfx Afzsl Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: new, Year of construction: 2025, length in total 7969 mm Ncsdpfxetq Dy Se Afzjl band width 700 mm conveying height 2500 mm total power requirement 0,75 kW Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: new, Year of construction: 2025, Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features Ncodpfx Afeuddbpezel General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Year of construction: 1991, condition: used, length in total 11000 mm Njdpfx Afsntcugozscl band width 200 mm Total height 630 mm length in width 400 mm ca.10 mm

Condition: used, band width 450 mm conveying height 1100 mm Nedpfxjvdx I Ns Afzocl belt length 2000 mm required space ca. 2500 m