Used Trumpf Sunimat 400 for sale (373)

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control -Foot switch comes from a Trumpf punch type Sunimat 400 Kdodpfod Aghgsx Ap Dju -Dimensions: 280/140/H150 mm -Weight: 4.4 kg

Condition: used, TRUMPF   TRUMPF TruDisk 4002 (4 C) High-performance solid-state disk laser with up to 4 kW   Type: TruDisk 4002 (4 C) Kdodpfxozii Nqe Ap Deu   The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. The combination of high power, excellent beam quality, and Smart Factory features makes it particularly attractive for modern production lines.   System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3*   No further testing was carried out in-house. The operating hours could not be read out. The laser ran perfectly until the end.   Technical features:   Power & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on the configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: Energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optionally with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design is also suitable for highly reflective metals Industry 4.0 capable: extensive sensors + data interfaces for condition monitoring, OPC-UA, predictive maintenance   Possible applications:   Scanner & hybrid welding (e.g., body construction, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface treatment Cladding, hardening, deep welding with high precision requirements   Technical data:   Supply voltage: 380 V (-10 %) to 460 V (+10 %), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Degree of protection: IP 54 Short-circuit strength: Icn / SCCR 50 kA   Weight: 850 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser source with KLH cooler The Trumpf TruDisk 4002 laser source is an industrial disk laser from TRUMPF, characterized by high power, beam quality, and efficiency. It is frequently used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of laser source with associated cooler, but without optics and fiber optic cable. Technical Data Laser power: 4,000 Watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typ. ≤ 8 mm·mrad Fiber connection: TruDisk lasers typically have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10 % ... 460 V +10 %, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that provides heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical characteristics: Ksdpoziivkefx Ap Dodu Water-water cooling Precise temperature control (typically 20–25 °C) Refrigerant: R 404A Can be controlled via the TRUMPF interface Necessary to comply with laser specifications Device type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Resonator power: 5 kW Working area (L × W): 4,000 × 2,000 mm Sheet metal thickness, steel: max. 25 mm Sheet metal thickness, stainless steel: max. 20 mm Sheet metal thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Kedpfx Apsz Npdgs Dedu TRUMPF laser Solid-state laser TruDisk 5001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal edge detection 17-inch touch color display Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine enclosure with certified viewing window, door on the right Electric roll-up roof Retrofitting capability for max. 2 additional LLK outlets

Condition: used, Trumpf Haas HL 4006D YAG Solid-State Laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, particularly for use with robots and with a range of up to 100 meters via flexible fiber optics. Application areas: Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated manufacturing: The laser is designed for integration into automated production lines with industrial robots. Precision machining: The high power and precise beam quality enable precise work in industrial machining. Technical data: Manufacturer: Trumpf Haas Type: HL 4006D Nominal laser power: 4000 W Beam quality: 25 mm.mrad Wavelength of laser light: 1064 nm Nominal voltage: 400 V Nominal power: 132 kW Nominal power consumption: 140 KVA Year of manufacture: October 2006 Weight: 1500 kg Operating hours: approx. 20,000 Dimensions W x H x D: 3200 x 1700 x 1250 mm Laser optics incl. ILV scanner, pyrometer and various spare parts Computer with WinLas software for parameter control Ksdpfjxg Hpcox Ap Djdu You can find the suitable cooling unit and robot in our shop. Rehsler TW HL4006D cooling unit Kuka KR 30/2 6-axis welding robot More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Maximum cutting force: 165 kN Laser power: W Machine number: A0111A0021 Year of manufacture: 2011 Mains voltage: 400 V Mains frequency: 50 Hz Connected load: 18 kVA Control voltage: 24 V Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Kdjds Aaxt Rjpfx Ap Dju Oxygen connection (O₂): 20 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. Kdsdpfoz Ii A Ssx Ap Dou ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: good (used), Year of construction: 2011, machine/vehicle number: B0702A0516, functionality: fully functional, TRUMPF TruBend 7036 – CNC Press Brake – Year of manufacture 2011 – Extensive equipment Machine data Feature Description Manufacturer TRUMPF Model TruBend 7036 Year of manufacture 2011 Machine type CNC Press Brake Press force 360 kN (36 t) Bending length 1,020 mm Control system TRUMPF TASC 6000 Back gauge 6 axes Machine no. B0702A0516 Connection 400 V / 50 Hz Location Germany Description For sale is a TRUMPF TruBend 7036 from the year 2011 with extensive special equipment. The TruBend 7036 is a compact, high-precision CNC press brake that is particularly suitable for the economical processing of small and medium-sized sheet metal parts. Thanks to the electromechanical direct drive and the ergonomic design, the machine is ideal for precise and efficient bending operations. Equipment and special options Machine and control system - TRUMPF TASC 6000 CNC control system - 15-inch touchscreen - Graphical workshop programming - Electromechanical direct drive (torque motor) - High-precision length measuring system - 6-axis back gauge system - Bending line laser - BendGuard safety system (block laser) - Automatic tool clamping - Operating data acquisition - Work area lighting at the front and rear (LED) Ergonomics package - Comfort support table - Comfort footrest - Swiveling control unit - Seat and standing aid - Storage consoles - Document holders Ksdpfxsz S N Ece Ap Dsdu Productivity Plus Package - Graphical workshop programming - Automatic tool clamping - BendGuard (block laser) Extensive accessories Additional information The machine was originally ordered with extensive special equipment and is particularly suitable for: - Fine sheet metal processing - Precision bent parts - Small series production - Prototype construction - Complex bent parts For sale due to business closure.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, pressing force: 66 t, table length: 2,000 mm, overall weight: 5,400 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, This TRUMPF TruBend 3066 press brake features a pressing force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis back gauge (X/R/Z1/Z2) and operates with a rapid approach speed of 200 mm/s. If you are looking for high-quality bending capabilities, consider the TRUMPF TruBend 3066 machine. • Y-axis stroke: 200 mm • X-axis stroke: 600 mm • R-axis stroke: 150 mm • Back gauge axes: X / R / Z1 / Z2 (4 axes), motorized • Pressing force: 660 kN • Bending length: 2600 mm • Maximum table-to-beam distance: 347-432 mm, depending on tooling • Throat depth: Approximately 400-420 mm • Beam inclination / parallelism: ±3 mm • Rapid approach speed of the Y-axis: 200 mm/s • Working speed of the Y-axis: 15 mm/s • Retract speed of the Y-axis: up to 200 mm/s • Positioning accuracy (Y-axis): 0.01 mm Kdsdpfx Apjz Sqn Ee Dou • Mains supply: 400 V / 50 Hz • Connected load: 15 kVA PNEUMATIC TOOL LOCKING, WILA CLAMPING SYSTEM BEND GARD ALWAYS UNDER TRUMPF MAINTENANCE

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Bending Length 4250 mm Ksdpjza U Nfefx Ap Dsdu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, overall weight: 5,400 kg, total length: 2,000 mm, Equipment: CE marking, documentation/manual, This TRUMPF TruBend 3066 press brake features a pressing force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis back gauge (X/R/Z1/Z2) and operates with a rapid traverse speed of 200 mm/s. If you are looking for high-quality bending capabilities, consider the TRUMPF TruBend 3066. • Y-axis stroke: 200 mm • X-axis stroke: 600 mm • R-axis stroke: 150 mm • Back gauge axes: X / R / Z1 / Z2 (4 axes) MOTORIZED • Pressing force: 660 kN • Bending length: 2600 mm • Usable open height: Minimum clearance 167 mm • Maximum table-to-beam distance: 347-432 mm, depending on tooling Kdodpfsz Sqqtex Ap Deu • Throat depth: Approximately 400-420 mm • Beam inclination/parallelism: ±3 mm • Y-axis rapid traverse speed: 200 mm/s • Y-axis working speed: 15 mm/s • Y-axis return speed: up to 200 mm/s • Positioning accuracy (Y-axis): 0.01 mm • Mains power supply: 400 V / 50 Hz • Connected load: 15 kVA PNEUMATIC TOOL CLAMPING, WILA TYPE BEND GARD UNDER TRUMPF MAINTENANCE

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V * Protection class: IP54 * Weight: approx. 850 kg Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA Ksdpfx Apszvqfyo Dodu * Serial number: 17KLH00670 * Voltage: 400/460 V * Frequency: 50/60 Hz * Refrigerant: R134a * Refrigerant quantity: 3.7 kg The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, Year of construction: 2018, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Layer thickness: 20–150 µm Laser power: 500 W Beam diameter: 100–500 µm O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Laser operating hours “Laser Beam on”: 17,508 h (as of 11.04.2023) EQUIPMENT Filter system Zirox sensor Single laser Kdjdpfez Irhkex Ap Dsu Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals All axes professionally secured for transport The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum-, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys. Last processed material: AlSi10Mg

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Kjdpfoz Slpljx Ap Dodu Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: ready for operation (used), Year of construction: 2012, Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter setting: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Including 2x scanner optics (PFO) for the process cells, 3x fiber optic cables and spare parts. Documentation available. On-site inspection is possible. Kdsdpfxewwll He Ap Dju

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W Kdodpfx Apjyuvcis Dou The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: good (used), Year of construction: 2005, functionality: fully functional, Press force: 400 t Kdodpfxsy Ew E Ie Ap Dou Bending length: 4050 mm Distance between uprights: 3550 mm Control system: CYBELEC ModEva 10 S Total power requirement: 47 kW Machine weight: approx. 30,400 kg Space requirement: approx. 6000x3000x3450 mm Accessories/Equipment: - 2 bending aids in front of the machine - 2 controlled stop fingers - 1 manually adjustable stop finger - Light curtain in front of the machine - Control system: CYBELEC ModEva 10 S - Parking space on the right for the bending aid - Die shifting - Tool holder on the top and bottom, EHT pneumatic - Crowning - Pneumatic tool shifting - Foot switch - Side protective doors - Controlled axes: Y1 - Y2 - R - Z1 - Z2 - inclination

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,000 h, machine/vehicle number: S1631C0399, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: TRUMPF, controller model: TruLaser Cell 8030, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 8,000 h, laser power: 3,000 W, laser wavelength: 1,030 nm, TRUMPF TruLaser Cell 8030 – 3D Laser – 2017 – 3 kW TruDisk is one of the most advanced and efficient 3D laser cutting machines in the world, widely used in the automotive industry, especially for processing hot-formed stamped components, body parts, rocker panels, and B-pillars. The machine is equipped with a TRUMPF TruDisk 3000 fiber laser (3 kW), offering high cutting quality, process stability, and low operating costs. The system features a 5-axis motion system and a spacious, ergonomic working chamber. Technical Data: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH (Germany) Model: TruLaser Cell 8030 Type: L60 Year of manufacture: 2017 Serial number: S1631C0399 Laser: TRUMPF TruDisk Laser type: solid-state fiber laser Laser power: 3000 W (3 kW) Wavelength: 1030 nm Operation: CNC Controller manufacturer: TRUMPF / Beckhoff Controller model: Beckhoff CX-Series (CX2030 / CX2040, TruControl system) Power supply: 400 V / 50 Hz Connected load: 45 kVA Protection: 3 × 100 A Media: electric + pneumatic (no hydraulics) Motion axes: 5-axis 3D machining Kdjdpfx Apsxxl A Es Dsu Maximum cutting thickness: Mild steel: up to 6 mm Stainless steel: up to 4 mm Aluminium: up to 3 mm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 14,346 h, laser power: 5,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser450 was manufactured in 2006. It features a working area of 4000 x 2000 x 115 mm and a powerful 5000 W CO2 laser. The machine includes advanced automation with an automatic pallet changer and various cutting heads for high-speed and thick sheet cutting. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser450 CO2 laser cutting machine we have for sale. Contact us for further details. Kodpfx Apj Abm Aco Dodu - Laser Unit: CO2 laser TLF 5000 (high-frequency excited) - Electrical Connection / Mains: 400 V / 50 Hz - Connected Load: 105 kVA - Control Voltage: 24 V DC - Required Fusing: 3x 160 A - Compressed Air Connection: 7–70 bar - Nitrogen Connection: 30 bar - Oxygen Connection: 20 bar - Control System: Sinumerik 840D (PC-based open control system)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,149 h, controller model: Bosch MTX compact, laser power: 4,000 W, punching force: 22 t, sheet thickness (max.): 8 mm, Includes SheetMaster & GripMaster! TECHNICAL DETAILS Laser power: approx. 4,000 W Punching force: max. 220 kN Sheet thickness: max. approx. 8 mm Working area, laser operation (X × Y): approx. 2,540 × 1,280 mm Working area, punching operation (X × Y): approx. 2,540 × 1,370 mm MACHINE DETAILS Control system: Bosch MTX compact Dimensions & Weight Footprint (L × W): approx. 7,950 × 6,700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA Operating hours: 38,797 h Kjdpjz Nn H Hefx Ap Djdu Beam on-time: 38,149 h EQUIPMENT Active dies SheetMaster GripMaster

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table Kdsdoz Izqujpfx Ap Dsu TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Kodpoz Ak Diofx Ap Dodu Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Kdjdpfsz Rknpsx Ap Dju

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection Kdedpfez Rl Nzsx Ap Deu TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0270 A0115, control type: CNC control, laser power: 5,000 W, sheet thickness (max.): 20 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, compressed air connection: 7 bar, For sale: TRUMPF TruLaser 5060 laser cutting machine, laser power 5,000 W, manufactured in 2007. The machine is fully operational, currently connected in production, and can be inspected while powered on by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser 5060 Machine type: A0270 Machine no.: A0270A0115 Year of manufacture: 2007 Laser power: 5,000 W Power supply: 400 V / 50 Hz Rated input: 105 kVA Required fuse protection: 3 × 160 A Control voltage: 24 V DC Compressed air: 7–10 bar Nitrogen N₂: 30 bar Oxygen O₂: 20 bar Included equipment: KLH Kältetechnik chiller, type L30/36-TK3.02 Refrigerant: R134a, filling quantity 21.5 kg Hante MF-L extraction/filter unit Air volume: 2,500 m³/h Filter area: 50 m² Kdedpjzgc Hwefx Ap Dju Standard accessories as per agreement Condition: Used machine, fully functional and currently connected in production. Inspection while powered on is possible in Košice, Slovakia. Sale with invoice. Price is net, VAT not included. Dismantling, loading, and transport are at the buyer’s expense and responsibility. The machine will be available for collection approximately from 09/2026, or by agreement. Location: Košice, Slovakia