Used Trumpf Tc 600 L for sale (404)

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Nodpfxjm Ak Huj Afzjcl Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2008, Operating hours: approx. 20,000 h Ncsdexvqawopfx Afzel

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 5,000 W, CNC Laser Cutting System TC L 3050 5000 Watt X Working area max.: 3000 mm Y Working area max.: 1500 mm Z Working area max.: 115 mm Control: Siemens Sinumerik 840D Laser power: 5000 Watt Operating hours: 72,846 h Laser on-time: 22,118 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 12 mm Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change system for cutting head - Automatic sheet edge detection Nodpfxoybaddo Afzocl - PCS Process Control System - Positioning laser diode - Programmable assist gas selection/pressure adjustment - Microweld - PMS plasma sensor system - Sprintlas - Capacitive height control (DIAS III) - ContourLas - AutoLas Plus - Oil spraying device - Automatic pallet changer - Automatic nozzle cleaning - Work area lighting - Conveyor for small parts/scrap - Multi-chamber extraction - Compact dust extractor - Automatic shut-off - Safety features (light barriers) - ToPs 100 lite - RJ-45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual - Raised platform design without steel frame - 9-inch cutting head - High-speed cutting head 3.75-inch - LoadMaster left-hand side

Condition: used, Year of construction: 1998, MACHINE WAS USED BY THE PREVIOUS OWNER SOLELY AS A PUNCHING MACHINE; THE LASER NEEDS TO BE CHECKED IF REQUIRED! Comes with TRUMALIFT SHEETMASTER 1606 TECHNICAL DETAILS Combined Punching/Laser Operation: 2,585 x 1,650 mm Punching Operation: 3,085 x 1,740 mm Laser Operation: 3,085 x 1,650 mm Performance Laser Power: 140 - 2,700 W Maximum Sheet Thickness: 8 mm Cutting Capacity – Mild Steel: 8 mm Cutting Capacity – Aluminum: 4 mm Cutting Capacity – Stainless Steel: 6 mm Maximum Punching Force: 220 kN Active Hold-Down (programmable in stages): 4.5 - 20 kN Maximum Workpiece Weight: 230 kg Speeds Max. Positioning Speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min Ncsdpfx Afjyar Dgezol C-axis Punching: 60 rpm Thread Forming: 180 rpm Stroke Rate Punching (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear Magazine: 18 tools with 3 clamps Tool Change Time: 1.5 - 5 s Precision Position Deviation: ±0.10 mm Mean Position Scatter: ±0.03 mm Programmable Chutes for Punching and Laser Parts (max.) Size: 500 x 500 mm TRUMPF CNC Control: Siemens Sinumerik 840D (base system)

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Capacities & Axes Working Range (X x Y): ≈ 3,080 x 1,650 mm. Max. Sheet Thickness: Up to approx. 8 mm (Mild Steel). Traversing Speeds: X up to 100 m/min; Y up to 60 m/min. Njdpfx Afjxyk D Dszocl Combined Speed: Approx. 100–116 m/min. Accuracy: Positioning accuracy of ±0.10 mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Included: Sheetmaster, Toolmaster TOP machine Nedpex Ifcmjfx Afzjcl Price on request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, operating hours: 76,500 h, machine/vehicle number: 080430, laser power: 3,200 W, punching force: 22 t, punching diameter: 64 mm, type of input current: three-phase, working range: 1,250 mm, Equipment: cooling unit, documentation/manual, safety light barrier, machine in very good condition, fully functional and reliable. currently dismantled and prepared for immediate removal. I can provide videos of operation. help with assembly. Njdpfjwwumyox Afzecl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Nsdpfjw Suwyox Afzjcl Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS Nedpon Nxw Djfx Afzjcl working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 13,549 h, laser power: 3,200 W, punching force: 22 t, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Ncjdpfx Ajvzrb Dsfzsl Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: used, functionality: fully functional, Year of construction: 2000, We are offering this used TRUMPF TRUMATIC 600L laser cutting machine, year of manufacture 2000. Manufacturer: TRUMPF Model: TRUMATIC 600L Year of manufacture: 2000 Condition: used Category ID: 902 Type ID: 1180 Type: laser cutting machine Ncsdpfx Afex Runwozol If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 53,000 h, machine/vehicle number: D0004B1198, actuation type: electric, controller manufacturer: TRUMPF, laser type: CO₂ laser, laser source manufacturer: TRUMPF Lasertechnik, laser source model: TruFlow 6000, laser hours: 10,520 h, laser power: 6,000 W, laser wavelength: 10,600 nm, year of last overhaul: 2024, Equipment: CE marking, cooling unit, documentation/manual, CO2 Laser TRUMPF Type TruFlow 6000 6000 Watt Average Output Power Nedjxrf Tdjpfx Afzscl Type: TruFlow 6000 Year of Manufacture: 2008 Beam On: 10,520 h (current) Laser On: 52,981 h (current) Scope of delivery includes: • TruFlow 6000 base unit • Integrated alignment laser • Side beam output design (Y) • Diameter variation mirror • Integrated mirror telescope • Circular polarizer • Extraction mirror ventilation filter unit • Portable control panel • Analog input: Laser power control • Programmable power cycles • Digital (BCD) interface • Plate heat exchanger station • Cooling tower system • 20m portable control panel • Fine adjustment All information without guarantee. The laser was overhauled in 2024: • All gas coolers replaced • All resonator optics replaced The laser is being sold due to cessation of operations. The laser has been used in a combined cutting/welding operation on a 5-axis laser gantry in a low-dust industrial hall. It is therefore in good condition. The laser will remain in production until the end of 2025, so operating hours will continue to increase. The laser is still electrically connected and can be inspected in operation. Further details upon request or during on-site inspection. Viewing by appointment is possible. Location: Gotha/Thuringia, near A4 motorway, Germany Net price plus current VAT, without warranty and/or return, ex works, without packaging Disassembly, packaging and transport to be arranged by the buyer, support can be provided.

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used Ncsdpou Nuycsfx Afzol

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Nodpfxsu Hxmzj Afzocl

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Nsdpfx Afswkd Efjzscl Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Ncsdow Uk A Rspfx Afzsl

Year of construction: 1995, condition: ready for operation (used), A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible. Nedpfjwftdgex Afzscl

Condition: used, Year of construction: 2006, table length 3000 mm table width 1500 mm laser capacity in Watt 4000 Equipment: - Closed machine frame with integrated laser unit - Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo radial blower radial turbo blower, mirror telescope - Automatic pallet changer - Longitudinal conveyor belt for small parts / waste - Drives: Maintenance-free three-phase servomotors - Additional highly dynamic Xp-axis - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting Ncsdpfx Asydfngjfzsl - APC capacitive height adjustment and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLAS - ContourLAS for the production of smaller holes - PMS plasma sensor technology - Automatic sheet outer edge detection - Programmable power cycles - Compressed air cutting - PCS Process Control System - Microweld - Spraying device for safe thick sheet metal processing - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic function, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-rigid light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin

Condition: excellent (used), Year of construction: 2001, operating hours: 39,000 h, functionality: fully functional, + QuickSharp Ncjdpeyc Nznsfx Afzjl + Quickset

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer Nsdpfx Ajxxbdlsfzocl - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: excellent (used), functionality: fully functional, operating hours: 58,000 h, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h Ncedsrgaw Hepfx Afzsl STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles Ncodpfxjuthz Te Afzel - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 39,500 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF Trumatic L 3030 - 4 kw - Year 2001 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2001 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC one 39,500 h (10.08.2024) Ncedeulqrlepfx Afzsl Machine regularly serviced by TRUMPF! STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - DIAS 3 height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors

Condition: good (used), Year of construction: 2008, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, working range: 2,500 mm, Equipment: cooling unit, TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530) Working area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Nedpfxsrwlwne Afzocl Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Motion unit for high-precision processing - Additional highly dynamic Yp axis - Drives with maintenance-free three-phase servomotors - Closed beam guidance - Conveyor for small parts and waste - NitroLine - FlyLine - Piercing end detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Laser logbook function CUTTING HEAD: - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Universal quick-change device - ControlLine CONTROL: - SIEMENS Sinumerik 840D control system - Automatic switch-off - ContourLine - SprintLine - Teleservice - Microweld - RJ45 network connection - 3.5" floppy disk drive - Network connection via telediagnosis SAFETY: - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Workshop programming EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser - Automatic pallet changer

Condition: defective spare-parts repository (used), Year of construction: 2011, laser power: 6,000 W, Mains connection: 400 V Connected load: 114 kVA Njdox Ey Ewepfx Afzocl Control voltage: 24 V Fuse protection: 200 A Compressed air connection: 6 - 14 bar