Used Trumpf Tlc 1005 for sale (405)

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles Rjdpfx Agsu N I Erozel - Laser welding

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 59,480 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, No reserve price – guaranteed sale to the highest bidder! Predecessor model of the well-known TruLaser Cell series TECHNICAL DETAILS Category: 5-axis 3D laser cutting system Condition: Fully serviced (twice annually by Trumpf UK) Last service: January 2019 New vacuum pump installed: 28/05/2019 Working Area X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 600 mm B-axis (rotational axis): +100° C-axis (rotational axis): n x 360° Laser Source Model: TRUMPF TLF 3200 Turbo Laser power: 3.2 kW Pilot laser: Present (for programming support) Control & Software CNC control: Siemens 840D with 3.5" floppy disk drive Network connectivity: Available (including analog modem for remote maintenance) Rjdpoxv Slhefx Agzsl Software: ToPs 100 with nesting module & IGES translator + ToPs 800 with fixture design & 3D IGES translator MACHINE DETAILS Beam on: 14,922 h Laser on: 59,480 h Dimensions: 3.0 x 1.5 x 0.6 m EQUIPMENT - Logbook function for laser power monitoring - Power supply cabinets - Closed-loop water cooling with air circuit - 5” high-pressure cutting optics - Setup device - Class 1 laser safety housing with manual sliding door - Extraction unit with particle filter (2,000 m³/h) - Stationary worktable

Condition: good (used), Year of construction: 2010, laser power: 4,000 W, Trumpf 5 axis laser machine, Year of manufacture 2010, Siemens control, travel X/Y 4000/1500 mm, Rodjvbdy Ejpfx Agzel 1 burning head, laser power 4 KW, Laser On 47950 hours, beam on 6200 hours, ADC cutting head 155 mm, Positioning laser diode, Teach panel, power cycles, Trumpf remote connection, Machine weight approx. 19,000 kg,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axes: 100 m/min B / C axes: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axes: 10 m/s² B / C axes: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser power: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Total operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optic with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including rear-side safety guard Scrap conveyor belt 4× configurable control interface Manifold block for 8 pneumatic clamps per side 2× loading status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Rodpfsx Dkymex Agzjl Cutting gas: compressed air Renishaw touch probe Measuring head (without touch probe) Measurement data processing 3× horizontal jig interface Extraction ducting Protective enclosure for rotary changer, including safety guard, 1 window, and column for control desk Status signal tower top & bottom Video monitoring with camera Monitor holder Special installation KLH chiller

Condition: used, functionality: unexamined, Year of construction: 2008, control type: CNC control, degree of automation: automatic, controller manufacturer: Trumpf, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser power: 5,000 W, Auction: Plant Closure Roschmann, Gersthofen (Augsburg) Bid now – Sale to the highest bidder. Lot 2910012: Complete industrial-grade laser cutting system, consisting of a TRUMPF TruLaser 5040 with 5 kW TruFlow CO₂ laser source, a Handte MF-L filtration unit, and a Schmalz vacuum lifting crane. Suitable for high-performance sheet metal cutting of steel, stainless steel, and non-ferrous metals. Machine: TRUMPF TruLaser 5040 Laser power: 5,000 W (CO₂) Year of manufacture: 2008 Power supply: 400 V / 50 Hz, 105 kVA Fuses: 3 × 160 A Control voltage: 24 V DC Compressed air: 7–10 bar N₂ connection: 30 bar Rsdpjx N Nkwofx Agzol O₂ connection: 20 bar Laser source: TruFlow 5000, manufactured on 15/05/2008 Filtration unit: Handte MF-L 50/10/1, 2,500 m³/h, 355 daPa, 50 m² filter area, year of manufacture 2008 Vacuum crane: Schmalz vacuum handling system Control: CNC with integrated operator panel Condition: Regularly serviced, overhauled in 2025 Operating hours: 50,187 (as of 02/2025)

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 64,820 h, machine/vehicle number: A1220A0892, laser hours: 34,068 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 710 kg, overall weight: 11,500 kg, space requirement height: 2,260 mm, space requirement length: 9,600 mm, space requirement width: 7,760 mm, working range: 3,000 mm, Special equipment: + 3200 on Laser TruFlow 6000 + RotoLas with automatic. Chuck + Base jaws jaw type 7-9 + Prism set jaw type 8 + Base carrier with sliding device + Workpiece carrier D 15-310 mm Standard equipment: - Closed machine frame with integrated laser unit, - Movement unit for high-precision machining, - Torque drive in combination with linear direct drives, - Closed beam guidance, - Single cutting head strategy, - Cooling unit, - Automatic pallet changer in longitudinal direction, - Wide longitudinal conveyor belt, - 17" touch color screen, - Work area lighting, - Position laser diode, - Spray device, - PierceLine, - FocusLine, - NitroLine, - PlasmaLine Cutting head - LensLine, - Lens cutting head with 250mm focal length, - Universal cutting head quick-change device (UTI), - ControlLine, Rsdsvn Stmjpfx Agzjl Control - Simple / advanced workshop programming, - Fast Reproduction - Integrated technology data, - Automatic shutdown, - Production plan, - Programmable cutting gas/pressure selection, - SprintLine, - ContorLine, - Microweld, - FasLine, - AdjustLine, - Teleservice, - Diagnostic functions, - Online help, - FlyLine Data transfer - USB interface, - RJ-45 network connection Safety - CE marking, - Light barriers, - Laser monitoring system, - Multi-chamber extraction system, - Compact dust extraction system, - Machine cover with Makrolon panes Extended machine equipment: + Thin sheet metal - Productive package - High-speed cutting - Lens cutting head 130mm focal length - Compressed air cutting + Pallet changer cross including safety device + MDE interface + LoadMaster including loading station and spreading magnet

Condition: new, functionality: unexamined, Control: Bosch CC 220S Punching Force: 165 kN Max Positioning Speed: 97 m/min Max. Sheet Thickness: 6.4 mm Tool Change Time (sec.): 1.5-6.5 Number of Tool Stations: 15 tool stations with 2 clamps Rjdsx Rc N Nspfx Agzjl Multitool (total capacity 90) 15 cartridges complete with die rings Max. Workpiece Weight (kg): 150 Max. Stroke Rate (1/min): 500 Machine Weight: 8000 kg Power: 14 kVA Dimensions | Width: 6000 mm x Depth: 5600 mm Delivery, installation, programming system, consumable tool package, training, warranty

Condition: used, Year of construction: 2003, Standard configuration Rodpfxouqd D Ej Agzjl Siemens Operator panel front: 1P 6FC5203-0AF52-0AA0Siemens MCP 19", KEY, MPI Layout Laser 1P 6FC5203-0AF52-1AA0CPU: 1P 6FC5247-0AF08-2AA0 without refurbishment

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Rsdpox I N Awofx Agzel Model: V85 Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: used, functionality: unexamined, Year of construction: 2015, Auction: Plant Closure Roschmann, Gersthofen (Augsburg) Place your bids now – sale to the highest bidder. Rjdpfx Asx N Nimjgzel Lot 2910011: Lot consisting of 1 used hydraulic CNC press brake in excellent condition. The machine features a powerful hydraulic drive and a touchscreen CNC control system, and is supplied with a complete tooling package. Model: TRUMPF TruBend 5320. Year of manufacture: 2015. Pressing force: 3200 kN, stroke: 445 mm. Hydraulic pressure: up to 310 bar. Control: CNC touchscreen panel with integrated safety features. Electrical specifications: 3×400 V, 50 Hz, 42.0 kVA, 61 A. Pneumatics: 6 bar control air, safety interlocks. Weight: approx. 22,800 kg. Accessories: Comprehensive set of upper and lower tools, stored on mobile racks.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors Redpfx Agjwcq Hgjzol - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: used, Year of construction: 2015, Working hours laser on: 32824 h Working hours beam on: 28572 Laser power: 3000 kW Max. steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18000 mm Width: 9000 mm Height: 2800 mm Machine weight: 21000 kg max. tube length: 6500 mm max. length finished parts: 4500 mm max. tube diameter: 152 / 170 mm min. tube diameter: 12 mm max. tube weight: 25 kg/m Standard configuration Machine: Stable machine frame Pipe support raw material with automatically retractable pipe supports Push-through chuck with self-centering parallel clamping rollers High-precision drives LoadMaster Tube 6.5m with bundle trough exclusion station parts tray Pipe support finished part with extendable guide rollers Scrap conveyor belt with bin Closed beam guidance via fiber optic cable (LLK) PierceLine NitroLine FocusLine Programmable cutting gas pressure automatic switch-off Ergonomic control panel with color touch screen Trump TruLaser: External solid-state laser TruDisk 3001 with 1 LLK outlet, diode-pumped disk laser with a wavelength of 1.03 nm Excitation via pump diodes laser power control Logbook function LAser cutting unit: Redpfx Ajuqdg Tsgzol universal cutting unit One cutting head strategy ControlLine control: Sinumerik 840 D SL easy handling Online help Integrated technology data Teleservice via the Internet Data transfer: RJ45 network connector USB Security: CE marking multi-beam light barriers Monitoring system for gas pressure, temperature and cooling water Compact dedusting system Protective cabin with certified safety panes Extended machine accessories - Rapid Cut- Bevel cut technology package- Finished part length +1.5 m (to 4.5 m)- SeamLine Tube- Wireless Operation Point- Low-scratch version LoadMaster Tube 6.5 m- Tube diameter 15 mm Automation - LoadMaster Tube 6,5 m with bundle support

Condition: good (used), Year of construction: 2004, Used Trumpf punching nibbling machine Model: Trumatic 5000 R Rjdpfex I A H Ajx Agzsl Capacity: 3000 x 1500 mm Punching force: 22 tons Maximum sheet thickness: 6 mm Including SheetMaster for loading and unloading Including various tool holders

Condition: good (used), functionality: fully functional, Year of construction: 2014, LoadMaster 6x2m Skiving device Loading bracket with spreader magnets Max. sheet thickness: 25mm Redpfx Aewlhgpjgzjl Max. weight: 2400 kg

Condition: used, Year of construction: 2007, machine/vehicle number: A0240A0521, Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Rsdouqcw Ropfx Agzjl Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA Standard configuration - Closed machine frame with integrated laser unit - Maintenance-free three-phase AC servo motors- Automatic pallet changer- Conveyor belt for small parts / slug- Work area lighting- Positioning laser diode- Oil spray device- AutoLas Plus- Hi-Las- PMS TRUMPF Laser- CO2 laser TLF 3200- Cooling unit- Radio-frequency - Radio-frequency excitation - Programmable cutting gas pressure - Laser power control - Logbook function Cutting head - Universal quickchange device for cutting head Control Unit - Siemens Sinumerik 840 D - 3,5" floppy drive - RJ45 network connection - Automatic shut down mechanism - Dignostic function - Maintenance logbook - Technology data Safety - Light barriers - Compact dust extractor - Multi chamber exhaust system - Beam delivery system Programming - Workshop programming ToPs 100 lite Extended machine accessories none Automation none

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,200 h, machine/vehicle number: Aufbau und Inbetriebnahme möglich, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 900 kg, warranty duration: 6 months, working range: 3,000 mm, +incl.preparation LiftMaster 1530; Liftmaster against surcharge Standard equipment: - Closed machine frame with integrated laser unit - Automatic pallet changer - Longitudinal conveyor belt for small parts and waste - Drives: Gantry drive in combination with linear direct drives - Cutting head quick-change device - Laser cutting head 250mm lens - Progr. cutting gas selection/pressure adjustment - APC capacitive height and process control (ControlLine) - AutoLas Plus (FocusLine) - Laser power control - Position laser diode - Hi-Las high-pressure cutting (NitroLine) - Sprintlas (FastLine) - ContourLas (ContourLine) - PMS plasma sensors (PlasmaLine) - Lens monitoring (LensLine) - Autom. sheet metal outer edge detection - Microweld - Automatic nozzle cleaning - Oil spraying device - Work area lighting - Automatic switch-off - Safety devices (multi-beam light barriers, encapsulated beam guidance) - Multi-chamber extraction system - Compact dust extractor Rodpfxjuviyqj Agzjl - ToPs 100 lite -RJ 45 network connection - USB interface - TFT color screen - Detailed operating instructions

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser hours: 22,600 h, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, feed rate X-axis: 200 m/min, workpiece weight (max.): 900 kg, overall weight: 12,000 kg, total length: 111,000 mm, total width: 46,000 mm, total height: 26,000 mm, space requirement height: 2,600 mm, space requirement length: 11,100 mm, space requirement width: 4,600 mm, working range: 3,000 mm, Special features: + 5000 on TruFlow 7000 30mm stainless steel! The machine was partially overhauled by a certified TRUMPF used machine partner. Optionally, for an additional charge, we provide: installation, commissioning, and training for up to three operators at the buyer's site, plus transport and travel costs. Standard Features: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive combined with linear direct drives - Enclosed beam guidance - Single cutting head strategy - TFT color monitor - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray system - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow - Maintenance-free turbo radial blower - Lens cutting head with 250 mm lens - Universal quick-change system (UTI) with bus connection - LensLine with condition check - ControlLine: height control and sheet edge detection Rodpfeivaubox Agzel - SINUMERIK 840D - Automatic shutdown - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE Mark - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Complete operating instructions - Lens cleaning case - Transport locks - Crosshairs/measuring bridge

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB Rodpfex Elxvox Agzol + BendGuard safety device for 200 mm/s Standard equipment: - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system - Modern block hydraulics - Electronic pressure scale - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - Flat front cover - Modern safety guard - CE mark - Oil cooler - Control cabinet cooling (air-air) - Operating manual

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Rodexayl Depfx Agzjl Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: good (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, CNC Laser Cutting System TruLaser Cell 3000 (L34) fiber X x Y x Z working area (max, mm): 800 x 600 x 400 Control: TRUMPF HMI based on Sinumerik 840 D solution line Laser power: 3,000 watts Operating hours: 31,875 h Laser on time: 3,286 h Machine High-dynamic and precise CNC laser machine Machine body made from mineral casting Axis system in cantilever design Axis travel range: 800 x 600 x 400 mm X-Y axes with linear direct drives Absolute measuring system with glass scales Z-axis with linear guide and ball screw drive Panel PC for process monitoring Integrated electrical cabinet and water/air machine chiller Protective enclosure active Active, sensor-monitored safety system, laser protection class 1 for laser power > 1000 - 8000 W - automatic lift door with personnel protection - double-walled side protection doors - safety window Rjdpfexur Iasx Agzol Technology package CutLine Professional Process adapter for cutting with gas supply FocusLine Focus diameter adjustment ControlLine Digital camera system for process monitoring Cutting optics adjustment device For aligning the cutting optics with the laser beam Technology package WeldLine - Welding functionality with FocusLine Professional - Welding gas supply for 3 gases Process adapter Welding f150 Crossjet Swivel axis focusing optics Torque axis for 3D processing with direct measuring system Swivel angle optics ± 135° Clamping frame with set of clamping bridges Modular system for fixture mounting Height adjustable 640-940 mm 1x clamping bridge each short/long 2D cutting table 800 x 600 mm For cutting sheet metal up to 6 mm Rotary axis C180 for machining rotationally symmetrical parts 3-jaw chuck d=125 Status lights Multi-touch unit MF-L1000 dust extractor External dust extraction system with a volume flow of 1,000 m³/h Filter system with automatic cleaning Power supply and control via the laser machine Function control MF-L1000 Reactive safety device for fire detection and suppression TruDisk 3001 TruDisk 3001 laser unit (4 C) Diode-pumped disk laser with beam quality of 4 mm mrad Laser power at workpiece: 3,000 W Consists of: - Laser with 1 cavity - Integrated laser power supply and real-time capable controller for evaluation and visualization of operating data - Fast laser power regulation - TruControl 1000 controller: - CPU with real-time operating system - 2x USB interface - 24x digital I/O interface, configurable as real-time interfaces - Expandable with fieldbus interfaces - Storage capability for 199 laser programs - Intelligent water management (CLK) with water-to-water heat exchanger and operating status display on control panel - Safety monitoring according to laser protection class 1, incl. central safety interlock - Housing for max. 4 laser outputs - Protection class: IP54 Control panel OP84 - Removable operating panel for laser unit control - 8.4" touchscreen with rotary push knob - Buttons: Emergency stop, power on/off Beam guidance consisting of: - Optical assembly for 1 laser light cable D - Central safety interlock - Switching time 50 ms - Output 1 with 100% with safety interlock - Pilot laser per laser light cable output incl. electrical control Chiller unit

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 320 t, Bending length [mm] 4220.00 Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Rjdsxxbr Ajpfx Agzol Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: good (used), functionality: fully functional, Year of construction: 1997, installation height: 535 mm, pressing force: 85 t, Bending length [mm] 2050.00 Pressing force [t] 85 Control Delem DA 69 Operating hours [h] 76807 Standard equipment: Redpfx Agswld R Djzel - Upper drive concept in two-cylinder design Y1/Y2 - Electro-hydraulic ram drive in proportional valve technology - Ram travel measuring system with spring compensation via glass scales - Modern block hydraulics - Spherical suspension and inclination of the pressure beam - CNC back stop system - Safe finger adjustment from the front - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool holder - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern protective cover + 6-axis back stop system + Hydraulic upper tool clamping + Hydraulic lower tool clamping

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control Rsdpfx Agsx Aq Axjzsl - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Rjdewld Suopfx Agzel Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: good (used), functionality: fully functional, Year of construction: 2011, laser power: 5,000 W, CNC Laser Cutting System TruLaser 5030 (L16) 5000 Watt X Working Area max.: 3000 mm Y Working Area max.: 1500 mm Z Working Area max.: 115 mm Control: Siemens Sinumerik 840D SL Laser Power: 5000 Watts Operating hours: 56,521 h Laser on time: 23,563 h Sheet thickness St. max.: 25 mm Sheet thickness Va. max.: 20 mm Sheet thickness Al. max.: 12 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit KKW Riedel from 2003 - TFT color display - Longitudinal conveyor for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray device - Piercline - FocusLine - NitroLine Rodpfx Ajx Ap Sfjgzjl - PlasmaLine - CO2 laser TruFlow 5000 - Maintenance-free turbo radial blower - Cutting head with 250mm lens - Universal quick-change unit (UTI) with bus connection - ControlLine: Height control and sheet edge detection - SINUMERIK 840D - Automatic shutoff - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE marking - Light barriers - Multi-chamber extraction system - Compact dedusting unit - High-speed cutting head 175mm focal length