Used Trumpf Trulaser 5040 for sale (406)

Condition: excellent (used), Year of construction: 2007, Technical data: 2D laser machine CNC control: SIEMENS Laser type: CO2 Working area: 4000 x 2000 x 115 mm Laser power: 5 kW Cutting capacity (steel): 25 mm Cutting capacity (stainless steel): 20 mm Cutting capacity (aluminium): 12 mm Max. workpiece weight: 1250 kg automatic pallet changer CE marking electrical equipment for three-phase current: 400 V / 50 Hz Dimensions (L x W x H): approx. 12,000 x 5,300 x 2,600 mm Weight: approx. 15 t Nwodpfx Asxyavvogzer The seller assumes no liability for typing or data transmission errors. The machine's condition regarding appearance, technology, and wear is commensurate with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2008, Year of manufacture: 2008 Operating hours (beam ON): approx. 22,900 h, Maintenance recently performed, machine in operation Working area: 2,000 x 4,000 mm Laser type: CO2 laser TruFlow 5000 Nwedpfx Agex Nm T Njzer Laser power: 6 kW Control system: Sinumerik 840D

Condition: used, Year of construction: 2012, TRUMPF TruLaser 5040 6kW Laser, manufactured in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded, and maintained throughout its entire operation period. The TRUMPF TruLaser 5040 (L18) laser cutting machine is designed for precise cutting of sheet metal made from materials such as steel, aluminum, copper, and brass. Laser cutting is performed using a stable 6 kW laser beam generated by a high-efficiency resonator. A range of additional systems streamline the machining process while enhancing cutting quality. The entire cutting process is fully automated, thanks to the automatic pallet changer system. This system enables simultaneous loading and unloading of workpieces during operation, thus increasing productivity and minimizing machine downtime. The TruLaser 5040 is offered with extensive equipment, including additional cutting heads and an advanced CNC controller with many useful features. In September 2022, the complete set of quartz tubes, all internal optics, and the lamp were replaced. The external optics were cleaned and calibrated in September 2025. Filters and oils were changed according to TRUMPF’s recommendations. Once a year, the water was changed along with flushing the CU and AL circuits. All these procedures are documented with proper service reports. Both original lenses for both heads and an optics case are supplied with the machine. Technical specifications of the TRUMPF TruLaser 5040 laser cutting machine: - Laser power: 6 kW - Travel (X/Y/Z axes): 4000/2000/115 mm - Maximum cutting thickness (mild steel): 25 mm - Maximum cutting thickness (stainless steel): 25 mm - Maximum cutting thickness (aluminum): 25 mm - Maximum cutting thickness (copper): 10 mm - Maximum cutting thickness (brass): 10 mm - Operating hours: 51,839 h - Machine on-time: 79,497 h - Compressed air connection: 7-10 bar - Nitrogen (N2) supply: 30 bar Nwjdpfx Agjx Nil Iozor - Oxygen (O2) supply: 20 bar - Connected load: 120 kVA - Machine power supply: 400 V; 50 Hz TRUMPF Laser Cutter Equipment: - CNC control: TRUMPF - Laser source: TRUMPF TruFlow 6000 - BrightLine system (improves quality of thick sheet cutting) - FlyLine system (fast hole cutting in thin sheets without pre-piercing) - PierceLine system (monitors and controls piercing process, reducing duration by up to 80%) - 250 mm cutting head - 175 mm cutting head - Automatic pallet changer system - Cutting with compressed air, nitrogen or oxygen - Longitudinal conveyor belt

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4000 mm Nwedpfxoxqtx Sj Agzsr Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 245 m/min WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM

Condition: excellent (used), Year of construction: 2022, Flatbed 8 kW Fiber Laser Cutting System – Maxi Format ONLY approx. 1,500 operating hours 8,000-watt fiber laser Available immediately Manufacturer: TRUMPF Model: TruLaser 5040 fiber (L76) Year of manufacture: June 2022 Working area: 4,000 x 2,000 mm (maxi format) Laser power: 8,000 watts, solid-state (fiber) Control system: SINUMERIK 840D SL Operating hours, approx.: Laser beam on: 1,500h; Machine on: 4,000h (as of July 2025) TECHNICAL DATA: Dimensions: Length: 11,200 mm; Width: 6,373 mm; Height: 2,200 mm Weight, approx.: 14,300 kg Working area; X, Y-axis: 4,000 mm x 2,000 mm Max. workpiece weight: 2,000 kg Laser power: up to 8,000 watts Max sheet thickness: Mild steel: 32 mm (increased sheet thickness package) Stainless steel: 40 mm Aluminium: 25 mm Copper: 10 mm Brass: 10 mm Average power consumption in production; TruDisk 8001, 17 kW SPECIAL EQUIPMENT: External solid-state laser TruDisk 8001 with 1 fiber optic output featuring SmartBeam Control EdgeLine Bevel (license fee may apply, only in conjunction with TruTops Boost) CoolLine with continuous water supply Connection for additional cutting gas Cutting package for increased sheet thickness Cross conveyor (right side of the machine) Cleaning brush CO2 extinguishing system for compact dust extractor Exhaust duct adapter for compact dust extractor OPC UW for Machine Tools basic (unmatic, license may be required) EXTENDED Standard Equipment: Support bars made of mild steel (67 mm spacing) TruDisk power supply via machine Compact dust extractor Production transparency TruTops Monitor incl. initial setup for 1 machine, 1 client DetectLine Drop & Cut Smart Nozzle Automation Automatic longitudinal pallet changer Operating environment temperature 5 to 35 / 45 °C FEATURES: Machine: Fully enclosed machine frame Gantry drive with linear direct drives Enclosed laser beam guidance via fiber optic cable Chiller unit for machine and laser (water-air) Longitudinal conveyor belt Integrated control cabinets Integrated cabinet Work area lighting Positioning laser diode Spray device Automatic nozzle cleaning Machine status indicator Cutting Unit: 1-cutting head strategy Universal cutting unit with fully adaptive lens system Protective glass Online protective glass condition monitoring Automatic nozzle centering Dynamic focus control Control System: Nodsw U Ecxepfx Agzowr Sinumerik 840D SL Fast reproduction Integrated technology data Automatic shut-off Programmable cutting gas/pressure selection Microweld Production planning Remote support interface Multi-sheet processing – Condition Guide Cutting Guide Ergonomic 21.5" wide-screen multi-touch control panel Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine FocusLine Copper cutting package Brass cutting package HighSpeed cutting package PlasmaLine – BrightLine fiber Performance melt cut package Data Transmission: USB interface RJ45 network connection Central Link Online Update Manager TRUMPF Laser: Highspeed ECO Excitation via pump diodes Laser power control New price over €800,000 This used machine can be inspected under production conditions. All information without guarantee – sale excludes all warranties and guarantees. Subject to prior sale.

Condition: excellent (used), Year of construction: 2015, Trumpf TruLaser 5030 fiber laser for sale 5kw 5030 Nwodpfx Agori R Utjzor Year 2015 TruDisk 5001 3metre x 1.5metre Liftmaster and unload cart Nozzle changer Beam on 18000hrs

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 64,820 h, machine/vehicle number: A1220A0892, laser hours: 34,068 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 710 kg, overall weight: 11,500 kg, space requirement height: 2,260 mm, space requirement length: 9,600 mm, space requirement width: 7,760 mm, working range: 3,000 mm, Special equipment: + 3200 on Laser TruFlow 6000 + RotoLas with automatic. Chuck + Base jaws jaw type 7-9 + Prism set jaw type 8 + Base carrier with sliding device + Workpiece carrier D 15-310 mm Standard equipment: - Closed machine frame with integrated laser unit, - Movement unit for high-precision machining, - Torque drive in combination with linear direct drives, - Closed beam guidance, - Single cutting head strategy, - Cooling unit, - Automatic pallet changer in longitudinal direction, - Wide longitudinal conveyor belt, - 17" touch color screen, - Work area lighting, - Position laser diode, - Spray device, - PierceLine, - FocusLine, - NitroLine, - PlasmaLine Cutting head - LensLine, - Lens cutting head with 250mm focal length, - Universal cutting head quick-change device (UTI), - ControlLine, Control Nwedpevn Stmofx Agzor - Simple / advanced workshop programming, - Fast Reproduction - Integrated technology data, - Automatic shutdown, - Production plan, - Programmable cutting gas/pressure selection, - SprintLine, - ContorLine, - Microweld, - FasLine, - AdjustLine, - Teleservice, - Diagnostic functions, - Online help, - FlyLine Data transfer - USB interface, - RJ-45 network connection Safety - CE marking, - Light barriers, - Laser monitoring system, - Multi-chamber extraction system, - Compact dust extraction system, - Machine cover with Makrolon panes Extended machine equipment: + Thin sheet metal - Productive package - High-speed cutting - Lens cutting head 130mm focal length - Compressed air cutting + Pallet changer cross including safety device + MDE interface + LoadMaster including loading station and spreading magnet

Condition: used, Year of construction: 2015, Working hours laser on: 32824 h Working hours beam on: 28572 Laser power: 3000 kW Max. steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18000 mm Width: 9000 mm Height: 2800 mm Machine weight: 21000 kg Nedpeuqdg Tofx Agzjwr max. tube length: 6500 mm max. length finished parts: 4500 mm max. tube diameter: 152 / 170 mm min. tube diameter: 12 mm max. tube weight: 25 kg/m Standard configuration Machine: Stable machine frame Pipe support raw material with automatically retractable pipe supports Push-through chuck with self-centering parallel clamping rollers High-precision drives LoadMaster Tube 6.5m with bundle trough exclusion station parts tray Pipe support finished part with extendable guide rollers Scrap conveyor belt with bin Closed beam guidance via fiber optic cable (LLK) PierceLine NitroLine FocusLine Programmable cutting gas pressure automatic switch-off Ergonomic control panel with color touch screen Trump TruLaser: External solid-state laser TruDisk 3001 with 1 LLK outlet, diode-pumped disk laser with a wavelength of 1.03 nm Excitation via pump diodes laser power control Logbook function LAser cutting unit: universal cutting unit One cutting head strategy ControlLine control: Sinumerik 840 D SL easy handling Online help Integrated technology data Teleservice via the Internet Data transfer: RJ45 network connector USB Security: CE marking multi-beam light barriers Monitoring system for gas pressure, temperature and cooling water Compact dedusting system Protective cabin with certified safety panes Extended machine accessories - Rapid Cut- Bevel cut technology package- Finished part length +1.5 m (to 4.5 m)- SeamLine Tube- Wireless Operation Point- Low-scratch version LoadMaster Tube 6.5 m- Tube diameter 15 mm Automation - LoadMaster Tube 6,5 m with bundle support

Condition: ready for operation (used), Year of construction: 2015, Main Drive Laser power 5KW Co2 Additional Equipment Platform installation possible Machine was connected to STOPA Universal large-scale storage system (4x2 metres) Working area 4000x2000mm Closed machine frame with integrated laser unit / Movement unit for high-precision processing / Torque drive in combination with linear direct drives / Closed beam guidance / Single cutting head strategy / Cooling unit Automatic pallet changer in longitudinal direction with extended pallet pull-out / 17” touch factory screen / ergonomic control panel with or screen / Work area lighting / Position laser diode spraying device / PierceLine, FocusLine, NitroLine, PlasmaLine Co2 laser TruFlow 5000 with optimized standby mode / Maintenance-free turbo radial blower / High-frequency excitation / TASC laser control, laser power control, laser logbook function Lens cutting head with 250mm lens / Universal quick-change device (UTI) with bus connection / LensLine with status check / ControlLine: Height control and sheet outer edge detection / Lens with RFID chip Laser ON / beam on 78187h/26610h This TRUMPF TruLaser 3040 was manufactured in 2015. It features a 5KW CO2 laser and has been maintained annually by TRUMPF. It can be integrated with a STOPA Universal large-scale storage system. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3040 machine we have for sale. Contact us for more information. Nwsdpfx Ajx H U Ddjgzer Application Types Cutting

Condition: used, Year of construction: 2013, Used machine in good condition. Available for immediate delivery. - Laser Type: fiber TruDisk 3001 - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 900 kg Nodpfovczy Eex Agzowr - Simultaneous positioning speed: 140 X+Y m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness cupper: 6 mm - Maximum material thickness brass: 6 mm - Maximum material thickness stainless steel: 15 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 40.500 h - Beam ON Working hours: 26.000 h - Electric consumption entire unit: 14 kW - Weight: 12.000 kg - Dimensions (long x wide x high): 9.300 x 4.700 x 2.200 mm

Year of construction: 2013, operating hours: 7,166 h, condition: like new (used), functionality: fully functional, TruMark Station 5000, with roll-off device for diameter marking, as good as new, hardly used. Table size 680x700 mm Working height 1050 mm Control TRU TOPS Mark Max. tool height 500mm max. workpiece weight 50 kg Space requirement approx. 1.8 x 1.4 x 2.0 m Nodpsfxq Duefx Agzjwr Weight 580 kg Connected load 1,8 kW TruMark Station 5000 X Y axis Protection filter 200x100 mm Laser TruMark 5040 with ytterbium fiber laser as laser beam source 1062mm +-3 mm Control computer with Windwos 7 Pilot laser TruMark Series 5000 Vavigator

Condition: used, Year of construction: 2012, table length 3000 mm table width 1500 mm burner heads 1 Control Trumpf total power requirement 73 kW Nwsdpjr Er Rbsfx Agzer Laser cutting machine Trumpf TruLaser 3030 Lean Edition Laser power 3200W Type L 20 Year of construction 2012 Net 400V/50Hz Total power requirement 73 kVA Control voltage 24V Fuse 3 x 125 A Air connection 7-10 bar Nitrogen connection 30 bar Oxygen connection 20 bar Beam one hour 7755 Laser one hour 25263 Machine is in very good condition and optimized by Trumpf in 12/2022. Documentation: Completely available

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser hours: 22,600 h, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, feed rate X-axis: 200 m/min, workpiece weight (max.): 900 kg, overall weight: 12,000 kg, total length: 111,000 mm, total width: 46,000 mm, total height: 26,000 mm, space requirement height: 2,600 mm, space requirement length: 11,100 mm, space requirement width: 4,600 mm, working range: 3,000 mm, Special features: + 5000 on TruFlow 7000 30mm stainless steel! The machine was partially overhauled by a certified TRUMPF used machine partner. Optionally, for an additional charge, we provide: installation, commissioning, and training for up to three operators at the buyer's site, plus transport and travel costs. Standard Features: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive combined with linear direct drives - Enclosed beam guidance - Single cutting head strategy - TFT color monitor - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray system - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow Nwsdeivaubspfx Agzer - Maintenance-free turbo radial blower - Lens cutting head with 250 mm lens - Universal quick-change system (UTI) with bus connection - LensLine with condition check - ControlLine: height control and sheet edge detection - SINUMERIK 840D - Automatic shutdown - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE Mark - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Complete operating instructions - Lens cleaning case - Transport locks - Crosshairs/measuring bridge

Condition: used, Year of construction: 2007, machine/vehicle number: A0240A0521, Working hours laser on: 50921 h Nwjdpfx Asuqcw Rjgzor Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA Standard configuration - Closed machine frame with integrated laser unit - Maintenance-free three-phase AC servo motors- Automatic pallet changer- Conveyor belt for small parts / slug- Work area lighting- Positioning laser diode- Oil spray device- AutoLas Plus- Hi-Las- PMS TRUMPF Laser- CO2 laser TLF 3200- Cooling unit- Radio-frequency - Radio-frequency excitation - Programmable cutting gas pressure - Laser power control - Logbook function Cutting head - Universal quickchange device for cutting head Control Unit - Siemens Sinumerik 840 D - 3,5" floppy drive - RJ45 network connection - Automatic shut down mechanism - Dignostic function - Maintenance logbook - Technology data Safety - Light barriers - Compact dust extractor - Multi chamber exhaust system - Beam delivery system Programming - Workshop programming ToPs 100 lite Extended machine accessories none Automation none

Year of construction: 2010, operating hours: 27,928 h, condition: ready for operation (used), This 3-axis TRUMPF TruLaser 5030 + LiftMaster + Stopa was manufactured in 2010. It features a 7000-watt CO2 resonator and handles a maximum sheet size of 3000x1500mm. The system includes a LiftMaster and a Stopa storage system with 85 pallets and a 255-ton capacity. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 machine we have for sale. Contact us for more information. Application Types Nwedpfx Agsx E Ed Eszjr Cutting

Condition: excellent (used), Year of construction: 2008, Technical specifications: 2D laser cutting machine CNC control: SIEMENS Laser type: CO2 Working area: 6000 x 2000 x 115 mm Laser power: 7 kW Cutting capacity, steel: 25 mm Cutting capacity, stainless steel: 25 mm Cutting capacity, aluminium: 15 mm CE marking Electrical equipment for three-phase current: 400 V / 50 Hz Pallet changer Nwjdpoxndmusfx Agzer Cooling unit Operating hours “Beam On”: 13,600 Operating hours “Laser On”: 40,500 Dimensions (L x W x H): approx. 17,000 x 4,600 x 2,600 mm Weight: approx. 12 t Condition: Very good condition Machine has only been used very little The seller is not liable for typographical or data transmission errors. The machine is in a condition, both visually and technically as well as in terms of wear, appropriate to its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, CNC Laser Cutting System TruLaser Cell 3000 (L34) fiber X x Y x Z working area (max, mm): 800 x 600 x 400 Control: TRUMPF HMI based on Sinumerik 840 D solution line Laser power: 3,000 watts Operating hours: 31,875 h Laser on time: 3,286 h Machine High-dynamic and precise CNC laser machine Machine body made from mineral casting Axis system in cantilever design Axis travel range: 800 x 600 x 400 mm X-Y axes with linear direct drives Absolute measuring system with glass scales Z-axis with linear guide and ball screw drive Panel PC for process monitoring Integrated electrical cabinet and water/air machine chiller Protective enclosure active Active, sensor-monitored safety system, laser protection class 1 for laser power > 1000 - 8000 W - automatic lift door with personnel protection - double-walled side protection doors - safety window Technology package CutLine Professional Process adapter for cutting with gas supply FocusLine Focus diameter adjustment ControlLine Digital camera system for process monitoring Cutting optics adjustment device For aligning the cutting optics with the laser beam Technology package WeldLine - Welding functionality with FocusLine Professional - Welding gas supply for 3 gases Process adapter Welding f150 Crossjet Swivel axis focusing optics Torque axis for 3D processing with direct measuring system Swivel angle optics ± 135° Clamping frame with set of clamping bridges Modular system for fixture mounting Height adjustable 640-940 mm 1x clamping bridge each short/long 2D cutting table 800 x 600 mm For cutting sheet metal up to 6 mm Rotary axis C180 for machining rotationally symmetrical parts 3-jaw chuck d=125 Status lights Multi-touch unit MF-L1000 dust extractor Nwodoxur Iajpfx Agzer External dust extraction system with a volume flow of 1,000 m³/h Filter system with automatic cleaning Power supply and control via the laser machine Function control MF-L1000 Reactive safety device for fire detection and suppression TruDisk 3001 TruDisk 3001 laser unit (4 C) Diode-pumped disk laser with beam quality of 4 mm mrad Laser power at workpiece: 3,000 W Consists of: - Laser with 1 cavity - Integrated laser power supply and real-time capable controller for evaluation and visualization of operating data - Fast laser power regulation - TruControl 1000 controller: - CPU with real-time operating system - 2x USB interface - 24x digital I/O interface, configurable as real-time interfaces - Expandable with fieldbus interfaces - Storage capability for 199 laser programs - Intelligent water management (CLK) with water-to-water heat exchanger and operating status display on control panel - Safety monitoring according to laser protection class 1, incl. central safety interlock - Housing for max. 4 laser outputs - Protection class: IP54 Control panel OP84 - Removable operating panel for laser unit control - 8.4" touchscreen with rotary push knob - Buttons: Emergency stop, power on/off Beam guidance consisting of: - Optical assembly for 1 laser light cable D - Central safety interlock - Switching time 50 ms - Output 1 with 100% with safety interlock - Pilot laser per laser light cable output incl. electrical control Chiller unit

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,197 h, This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information. Nwjdpfx Agjx E Eb Dszer Application Types Cutting

Condition: excellent (used), Year of construction: 2009, Technical Data: 2D Laser Machine CNC Control: SIEMENS Laser Type: CO2 Laser TruFlow5000 Working Area: 3000 x 1500 x 115 mm Laser Power: 5 kW Cutting Capacity Steel: 25 mm Cutting Capacity Stainless Steel: 20 mm Cutting Capacity Aluminium: 12 mm Max. Workpiece Weight: 710 kg Automatic Pallet Changer CE Marking Njdpjx Dy H Nsfx Agzowr Electrical Equipment for Three-phase Current: 400 V / 50 Hz Dimensions (L x W x H): approx. 9300 x 4600 x 2600 mm Weight: approx. 12 t Special Equipment: Quick-change cutting head device Nitr-Line high-pressure cutting Plasma-Line Focus-Line Condition: Very good condition Machine barely used Laser hours used: only 18,700!!! The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are in accordance with its age; used machines are sold without any warranty whatsoever.

Condition: good (used), functionality: fully functional, Year of construction: 2011, laser power: 5,000 W, CNC Laser Cutting System TruLaser 5030 (L16) 5000 Watt X Working Area max.: 3000 mm Nsdpfxox Ap Sfo Agzjwr Y Working Area max.: 1500 mm Z Working Area max.: 115 mm Control: Siemens Sinumerik 840D SL Laser Power: 5000 Watts Operating hours: 56,521 h Laser on time: 23,563 h Sheet thickness St. max.: 25 mm Sheet thickness Va. max.: 20 mm Sheet thickness Al. max.: 12 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit KKW Riedel from 2003 - TFT color display - Longitudinal conveyor for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow 5000 - Maintenance-free turbo radial blower - Cutting head with 250mm lens - Universal quick-change unit (UTI) with bus connection - ControlLine: Height control and sheet edge detection - SINUMERIK 840D - Automatic shutoff - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE marking - Light barriers - Multi-chamber extraction system - Compact dedusting unit - High-speed cutting head 175mm focal length

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand TRUMPF This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information. Application Types Cutting Nwedox D R Udspfx Agzjr

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand TRUMPF This TRUMPF TruLaser 8000 was manufactured in 2012. A CO2 laser cutting machine featuring dual 3.6 kW power and a large working area of 2500x8000 mm. Consider the opportunity to buy this TRUMPF TruLaser 8000 CO2 laser cutting machine. Contact us for more information. Application Types Cutting Njdpjx D Eghofx Agzewr

Condition: ready for operation (used), Year of construction: 2014, Main Drive Number of axis 3 This 3-axis TRUMPF TruLaser 3030 Fiber was manufactured in 2014. It features a 3.0 kW fiber resonator and handles a maximum sheet size of 3000x1500. Ideal for precise fiber laser cutting, consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber laser cutting machine. Contact us for more information. Nsdsx D Nruopfx Agzswr Application Types Cutting

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,843 h, Main Drive Number of axis 3 Additional Equipment Resonator: 4kW Co2 Nwodpfox D R Dxjx Agzer This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2008, operating hours: 34,151 h, General Data Machine weight 12000 kg Measurements height 2400 mm Dimensions Machine Length 11100 mm Control Unit Brand SIEMENS Model Sinumerik 840D Njdpjx D Htiefx Agzewr Main Drive Number of axis 3 Laser power 5 kW Movement X-Axis Movement 3000 mm Z-Axis Movement 115 mm Y-Axis Movement 1500 mm This 3-axis TRUMPF TRULASER 5030 was manufactured in 2008, featuring a 5 kW CO₂ laser and Siemens Sinumerik 840D control. It handles a working range of 3,000 × 1,500 × 115 mm and speeds up to 200 m/min. Ideal for cutting mild steel up to 25 mm, stainless steel up to 20 mm, and aluminium up to 12 mm. Consider the opportunity to buy this TRUMPF TRULASER 5030 fiber laser cutting machine. Contact us for more information. Application Types Cutting