Used Trumpf Trumatic for sale (370)

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, Equipment: cooling unit, dust extraction, safety light barrier, TRUMPF Trumatic L 3050 – 5 kw MACHINE WAS OVERHAULED IN 2019! Since then, it has been regularly maintained (twice a year). TECHNICAL DATA: Manufacturer: TRUMPF Type: Trumatic L 3050 – 5 kw Year of manufacture: 2003 Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840 D Laser power: 5,000 watts Max. sheet thickness, structural steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 12 mm Operating hours, laser: approx. 56,000 h / beam: 19,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser head - Laser head: CO2 laser TLF 5000, high-frequency-excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor PMS - Fast processing with SprintLas - ContourLas for producing small holes - Programmable power cycles - Microweld - Cutting gas pressure setting, programmable - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change device for cutting heads - Automatic sheet edge detection - Capacitive height control (DIAS) - Positioning laser diode - Automatic focus adjustment AutoLas Plus - Automatic shut-off - Work area lighting - Control system SIN 840D: Open control system based on PC, easy operation, online help, diagnosis functions, maintenance log, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance completely encapsulated and purged with nitrogen, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase 400 V / 50 Hz - Paint finish: Structured paint white RAL 9002 / cornflower blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens Crodpe Ah Ughefx Aktoi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Working area combined punching/laser: 3,000 × 1,500 mm Working area punching operation: 3,000 × 1,500 mm Working area laser operation: 3,000 × 1,500 mm Max. sheet thickness mild steel: max. 8 mm Max. sheet thickness stainless steel: max. 8 mm Max. sheet thickness aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching rate with E = 1 mm: max. 900/min Max. marking rate: max. approx. 2,800/min Max. number of multi-tools with 3 tool holders: max. 18 Tool capacity: 180 tools Crodpfx Ako Ahhi Ustei Max. axis speed X/Y simultaneous: max. 108 m/min EQUIPMENT SheetMaster ToolMaster GripMaster Working area without repositioning in large format Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet disposal on lifting table

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Maximum cutting force: 165 kN Laser power: W Machine number: A0111A0021 Year of manufacture: 2011 Mains voltage: 400 V Mains frequency: 50 Hz Connected load: 18 kVA Control voltage: 24 V Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar If you have any questions or require further information, please feel free to send us a message or call us. Crodpfxj Aaxt Ro Aktei

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Cjdex Ap A Ropfx Aktsri Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN Crodpoycuypefx Aktji - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,540 h, machine/vehicle number: A1121D0047, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: Touchpoint HMI, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: TruDisk 3001, laser hours: 738 h, laser power: 3,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 2,500 mm, table width: 1,250 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,535 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 108 m/min, feed rate Y-axis: 108 m/min, workpiece weight (max.): 150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer a well-maintained TRUMPF TruMatic 3000 (K09) combined laser and punching machine, manufactured in 2022. Manufacturer: TRUMPF Model: TruMatic 3000 (K09) Material number: 2448753 Power frequency: 50 Hz Voltage: 400 V Diagram number and version: 93120-5-200_05 Serial number: 407618918 Year of manufacture: 2022 Equipment number: A1121D0047 This is an excellent machine located in a clean production environment. It has only been used to process thin sheet metal under 3mm. It has almost all optional features selected from TRUMPF. It is equipped with SheetMaster and SortMaster. It comes with more than 500 tools, automatic QuickSet, and QuickSharp. It is currently in operation and can be inspected by appointment. Codps Af Uvyefx Aktori If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 070027, control type: CNC control, punching force: 150 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, overall weight: 8,000 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Cjdpoz E R S Aefx Aktsri Type: 9095 — Serial number: 070027 Year of manufacture: 1994 Max. punching force: 150 kN Machine weight: 8,000 kg Power supply: 380V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling and cassettes. For reference, standard specifications of this model: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any questions or send further photos/videos of the machine in operation.

Condition: used, Year of construction: 2000, overall weight: 9,200 kg, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Cjdpsz Ak Dijfx Akteri Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Cjdpsz Iwvgjfx Akteri

Condition: good (used), functionality: fully functional, Year of construction: 1999, laser power: 2,400 W, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,740 mm, overall weight: 23,000 kg, total length: 9,100 mm, total width: 7,900 mm, total height: 2,400 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition. Crodeymrn Ejpfx Aktei

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 070691, control type: CNC control, actuation type: mechanical, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, table length: 2,070 mm, table width: 1,280 mm, overall weight: 8,000 kg, power: 14 kW (19.03 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine (with Multitool) For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1998. Well maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070691 Year of manufacture: 1998 Max. punching force: 165 kN Machine weight: 8,000 kg Power supply: 220V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling, cassettes, and Multitool. Codpfx Akjz E Sa Ijteri For reference, the standard specifications for this model are: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email. We will be happy to answer any questions and provide further photos or videos of the machine in operation.

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system Csdpfxjz Rl Hyo Aktjri - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation Codez Rl Uqopfx Aktjri - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology Crodpfjuthz Tsx Aktei - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Crjdpfjzd Ulaex Aktsi Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2006, A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement. Credpsz Sr Nkefx Aktji

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 20,141 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, input voltage: 400 V, compressed air connection: 7 bar, overall weight: 15,000 kg, total length: 12,000 mm, total width: 6,000 mm, total height: 2,000 mm, workpiece length (max.): 4,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 75 mm, space requirement height: 2,000 mm, space requirement length: 12,000 mm, space requirement width: 6,000 mm, working range: 4,150 mm, Manufacturer: Trumpf Model: Trumatic 4030 Beam operating hours: 20,141 h Last service: May 2025 Length: approx. 12 m Width: approx. 6 m Height: approx. 2 m Power: 4 kW X-axis travel: 4,150 mm Y-axis travel: 2,140 mm Z-axis travel: 117 mm Max. material thickness: Cedpfx Akew Tt Nwoteri Steel: 20 mm Stainless steel: 12 mm Aluminium: 10 mm Year of manufacture: 2006 Connected load: 88 kVA Condition: Good - Everything works For further questions, please call or send an email. Loadmaster is not included Available from 01.10.2025

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Fully functional. Crodpsz Ayq Esfx Aktei

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness 6.4 mm Max. material weight 150 kg Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication Codozgfnqjpfx Aktori ⦁ Punch slug vacuum ⦁ Forming function ⦁ Punching stroke counter Control system ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function ⦁ Program manager ⦁ Production plan Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Year of construction: 2003, condition: good (used), Used quality Trumpf 5kw cnc laser 4metre x 2metre cutting bed Its just been serviced by Trumpf and outputting the same power as new. Very low hours for its age, very good condition, used intermittently on one shift and available to see in operation by appointment: Make – Trumpf Model – Trumatic L 4050 Laser type – TLF 5000TM / 5kw / 5000watts Crodpfxshcw Nze Aktsi Year of manufacture – 2003 – commissioned 2004 Size – 4metre x 2 metre Features – Rotolas tube cutting facility (examples of parts just processed per photographs) Hours – Laser turned on 33861 – Beam on 11480 Fully serviced with Trumpf uk

Condition: ready for operation (used), Year of construction: 1995, punching force: 22 t, total height: 2,300 mm, total width: 6,000 mm, sheet thickness (max.): 6 mm, overall weight: 11,050 kg, product length (max.): 6,900 mm, number of axes: 2, CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine. • Condition: In working condition; normal signs of use (scratches/dirt, especially near punch head); floor wear visible • Max sheet thickness (steel): 6 mm • Note: Current tooling set is suitable for up to 1.5 mm sheet thickness • Max punch diameter: 76.2 mm • Max workpiece weight: 150 kg • Working range: X = 2500 mm without repositioning (4 m sheets previously processed using repositioning/extension tables); Y = 1250 mm Cjdpfsz Azurex Aktsri • Axis speeds: X up to 90 m/min; Y up to 60 m/min • Stroke rate (nibbling): up to 900 strokes/min • Table/Design: Flat perforated work table; mechanical punching head with hydraulic/pneumatic lines; long material support arm; control panel on cabinet with display, controls, and emergency stop • Utilities: 400 V / 50 Hz / 3-phase; connected load approx. 17 kVA; compressed air 6 bar Additional equipment • Large set of punches, dies, and tool holders (complete tooling set) • Large metal cabinet with shelving for tool storage • Metal scrap container on casters (under-table)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each Crjdpfx Asz R Aa Rsktei

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Crsdpfxsz Rzike Aktei Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: Trumatic Lasercell 1005 (Type TLC 1005) Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Price negotiable Dismantling and transport preferably carried out by the buyer

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Cjdpfx Ajyz Ap Rsktsri

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: A0220A0572, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens Simunerik, laser type: CO₂ laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, workpiece weight (max.): 710 kg, input voltage: 400 V, input frequency: 50 Hz, overall weight: 11,500 kg, total length: 9,300 mm, total width: 4,600 mm, total height: 2,600 mm, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, All services and overhauls carried out directly by the manufacturer (Trumpf). Inspection possible at any time. Assembly plan included. The machine was dismantled and stored with the assistance and supervision of Trumpf. Support with assembly and commissioning is also available upon request. Machine assembly plan attached to the documentation. The machine is being delivered including LIFTMASTER type LMZ3050 0556817 / 256417 / 9000 N load capacity / year of manufacture 2003. Crsdpfxox Rt Dde Aktsi See details in the photos. Including loading and unloading cart Including longitudinal and transverse conveyor belts for small parts/waste Including safety barrier fencing The machine comes with a large spare parts inventory (price obtained from Trumpf: purchase value EUR 42,000.00). See list in the attachment. Loading and transport of the machine was carried out by SCHWERLAST Austria (costs within Austria approx. EUR 6,000.00).