Used Trumpf Trumatic 3000 for sale (385)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) Gjdpoy Samujfx Akyouc - ToolMaster set-up parallel to production time

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 70,119 h, machine/vehicle number: A0111A0021, controller model: TruControl 1000, laser source model: Festkörperlaser, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, Equipment: CE marking, safety light barrier, TECHNICAL DETAILS Working area: 2,500 x 1,270 mm Parts flap: 300 x 500 mm Clamping claws: 2 units Laser Solid-state laser: TruDisk 3001 LLK outlets: 1 unit Fiber optic cable: 10 m Cutting head Lens focal length: 200 mm MACHINE DETAILS Operating hours Laser on-time: 70,119 h Total operating hours: 73,936 h Control Laser control: TruControl 1000 Screen size: 15" EQUIPMENT Robust, easily accessible C-frame Precision linear guide system for high-accuracy processing Linear magazine including 2 clamping claws Maintenance-free drives Repositioning device with programmable hold-down Brush tables Good parts container Chip bin Enclosed beam guidance via fiber optic cable ContourLine FocusLine NitroLine Chiller unit Diode-pumped excitation for long service life Upgradeable for up to 3 additional LLK outlets Quick-change cutting head system ControlLine Electro-hydraulic punching head Programmable hold-down plate Tool length compensation Punch lubrication spray Slug extraction system Open control based on Bosch PNC-P Control panel with TFT color display Teleservice via Internet Automatic shutdown USB port Gsdpfxjy R Uate Akyouc Network connection CE marking Multi-beam light barriers Laser source safety monitoring system Quick disconnect for hydraulics Scatter radiation protection Additional LLK outlet for operation with Trumpf system MultiTool function MultiBend function Thread forming function Marking / fast embossing function Roller and deburring technology function Softpunch function Adaptive stroke calibration Spray lubrication for die Additional clamping claw Individually opening clamping claws Height-adjustable clamping claws Automatic clamping claw closing Repositioning cylinder with height-adjustable pressure pieces Sensor for parts chute Loading/unloading aid for brush tables Vibration-damped foundation Chip conveyor with tilting bin Liftable brush segment Parts conveyor belt

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 55,582 h, machine/vehicle number: A0110A0058, controller model: BOSCH PNC-P, laser power: 2,000 W, number of slots in tool magazine: 21, TECHNICAL DETAILS Working area: 2500 x 1250 mm Max. sheet thickness: 4.0 mm Max. punching force: 165 kN Max. active stripper force: 9 kN Max. workpiece weight: 120 kg Max. part chute size: 300 x 500 mm Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Max. punching strokes (F=1 mm): 600 strokes/min Max. marking strokes: 1300 strokes/min Tools Number of tool and clamp stations: 21 Tool change time Single tool: 4.4 s Multitool: 2.2 s Laser Data Guaranteed maximum output: 2000 W Laser model: TCF1 Power distribution: TEM∞ Beam quality² K (M²): 0.9 (1.1) Laser gas (CO₂, N₂, He, Xe, CO) consumption for cutting gas⁴: max. 1 cylinder premix gas p.a. Laser cutting head lens size: 5" MACHINE DETAILS Control model: BOSCH PNC-P Laser system switch-on hours: 25,582 h Electrical consumption (laser unit): 65 kVA EQUIPMENT Sturdy C-frame Coordinate guidance with integrated linear scale 2 workpiece clamps Maintenance-free three-phase servomotors Brush tables HI-LAS high-pressure cutting High-speed processing with SprintLas Programmable scan feed Quick-change cutting head system APC capacitive height control Lens monitoring sensors Laser logbook function Compact nesting table Rotating tool holder Automatic repositioning with stripper Automatic part chute Sliding part container Guodpfjyv Ddrex Akysc Spray lubrication for punch 2 lubricant containers Slug extraction Chip bin Hydraulic quick shut-off External control panel 15" TFT touchscreen color display USB stick interface 3.5" floppy disk drive Safety devices RJ45 network connection Network integration Comprehensive operating manual Remote diagnostics facility SPECIAL EQUIPMENT Thread forming function Softpunch function Vertically adjustable clamp Repositioning cylinder Vibration-damped installation Sensor for part chute Spray lubrication for die Brush-type loading/unloading assistance Note: The machine has already been dismantled (by a certified TRUMPF used machinery partner) and is ready for shipment.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Guodpfx Akoycuypsysc Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2000 Guedpfx Aong Al Aekyoc Fully serviced With manuals Good condition and can be seen working in production Complete with:

Condition: excellent (used), Year of construction: 2006, laser power: 6,000 W, Used Low Cutting Hours Trumpf Trumatic L3050 6kw cnc laser cutting machine for sale Technical information: Year 2006 Workpiece dimensions 3000 x 1500 mm / 3metre x 1.5metre Type of Laser TLF 6000 Power 6000 Watt / 6kw Control Siemens Sinumerik 840D Longitudinal travel X-axis 3000 mm Cross travel Y-axis 1500 mm Gsdporvhzmsfx Akysuc Height travel Z-axis 115 mm Travel speed 200 m/min Max cutting thickness in steel 25 mm Weight 12 ton Delivery and installation complete with tuition can be arranged.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: 4 dosing containers 1 construction cylinder 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Gusdpfx Akjvu Ticeyjc Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas - Nitrogen, argon Power supply V / A / Hz 400 - 32 - 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours EQUIPMENT Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): Gedsza Urgopfx Akyouc TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Workpiece weight max.: 230 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 070804, punching force: 16 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,070 mm, travel distance Y-axis: 1,280 mm, punching diameter: 76 mm, TECHNICAL DETAILS Gedpfx Akezapqdjyjuc Punching force: 165 kN Working area: 2,070 x 1,280 mm Sheet thickness: 6.4 mm Workpiece weight: 150 kg Punch diameter: 76.2 mm X-axis speed: 80 m/min Y-axis speed: 55 m/min Control system: CC 220 MACHINE DETAILS Machine weight: approx. 8,000 kg

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Gjdpfsy U U Npox Akyjuc Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Sheet metal thickness - max.: 6.4 mm Punching diameter: 76.2 mm Travel distance X-axis: 2,500 mm Travel distance Y-axis: 1,250 mm Gsdpfjy U U Edsx Akyeuc Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed (rotary axis): 360 °/sec Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions: 6,400 x 5,800 x 2,100 mm Machine weight approx.: 11,050 kg Operating hours: 30,430 h

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 53,000 h, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser type: CO₂ laser, laser power: 3,200 W, punching diameter: 76 mm, sheet thickness steel (max.): 8 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, quick-change device, safety light barrier, Special equipment: + 2000 on Laser TruFlow 3200 + Blow-out device for small parts + Thread forming function with thread former breakage monitoring + MultiShear function + Slitting function + Marking/Fast chamfering function + Softpunch function + Re-punch cylinder + Vibration-damped mounting + Chip conveyor with tilting container + Additional clamping arm Manufacturer's standard description: Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change system - Programmable cutting gas selection/pressure setting - Capacitive height control Dias III - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater Gujdpfx Akszdc Hmsysc - 18 tool cassettes - 18 die plates - Automatic tool changer with 19 stations - 2 clamping arms - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic re-punching - Tool length compensation - Fast shutdown of the hydraulics - Automatic shutdown - 2 automatic dividing slides for parts 500 x 500 mm each - Sensors for both dividing slides - 2 scrap bins - Punch scrap extraction - Forming capability - Programmable stamping tool lubrication with 2 containers - Programmable pressure plate - Adaptive stroke length control - Safety devices - Remote diagnostics system - RJ 45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual

Condition: ready for operation (used), Year of construction: 1998, punching force: 22 t, total height: 2,300 mm, sheet thickness (max.): 6 mm, overall weight: 13,800 kg, table width: 3,000 mm, table length: 1,500 mm, table load: 100 kg, controller manufacturer: TRUMPF, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • X-axis working range: 3000 mm without repositioning Gusdpfex Uqzzox Akyjc • Y-axis working range: 1500 mm • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar The machine is in working condition. It includes a large set of punches, dies, and tool holders. Dimensions Machine Depth 6000 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only Gjdpfxszarc As Akyeuc • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: good (used), functionality: fully functional, Year of construction: 2002, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Quick-change device for cutting head - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools Gusdeza Eyhjpfx Akyoc - NC-controlled digital, maintenance-free three-phase drives - Automatic re-positioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing tables, each 500 x 500 mm - Sensors for both indexing tables - Punch slug extraction - Forming capability - Programmable punch tool lubrication - Programmable pressure foot - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + Laser TLF 3200 + SortMaster Box incl. 4 containers + GripMaster, adjustable + Scissor lift table + Re-positioning cylinder + Rotoscanner + HZB SheetMaster + SortMaster Pallet + SheetMaster incl. C-frame + Modular suction plate + additional clamping jaws, total of 4 + Chip conveyor with tilting container + Bulging detection

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function Gedpjza Eu Esfx Akysuc + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), functionality: fully functional, Year of construction: 2011, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Standard Equipment: Machine - Work area 3050 x 1550 mm - Robust, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase motors - Repositioning device with programmable clamping system - Foot pedal for closing clamping claws - Ball tables - Two parts collection containers - Chip container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine Gsdsza A Hljpfx Akysuc - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Quick flap for laser parts 500 x 500 mm including sensor for part chute - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control system TASC - Enclosed beam guidance - Beam pipe ventilation with compressed air Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Punching Station - Electro-hydraulic punching head - Rotating mono-tool holder - Tool length compensation - Programmable clamping system with manually adjustable clamping force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Deflection detection - Flap for punching parts 500 x 500 mm including sensor for part chute - Reaching the fill level in the punching console - Level monitoring for thread forming and tool lubrication Control System - TRUMPF control system based on Rexroth IndraMotion MTX - External control panel with 15" TFT touchscreen - Hard drive with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Dual light curtains - Monitoring system for gas pressure, temperature, coolant, among others - Quick stop - Protection against scattered radiation - Compact dust extraction system - TruFlow 4000 including LensLine - Automatic nozzle changer - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication for die - 4 individually opening clamping claws - Repositioning cylinder - Vibration-damped mounting - Chip conveyor with tipping container - Brush tables with loading and unloading assistance - Blowing device for small parts Automation: SheetMaster - Suction frame 3000 x 1500 mm with 36 suction cups (y-axis = 400 mm) - Adjustable suction rails (v-axis = 120 mm) - Peeling suction - Vacuum sensor for each suction cup - Sheet thickness sensor for double sheet detection - Automatic clamping claw closing on machine - Central lubrication - Main-time parallel loading and unloading of SheetMaster - Unloading monitoring GripMaster special arrangement 4m: - Scrap grid tongs with sensor - Scissor lift table 400 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 56,566 h, punching force: 18 t, total height: 2,252 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. • Maximum sheet weight: 160 kg • Performance: • Punching strokes (E = 1 mm): 1000 strokes/min • Marking strokes: 2500 strokes/min • MultiTool tool-change time: 0.3 s • Power consumption: • Standby with auto-shutdown: 0.3 kW (average) • During production: 5.6 kW (average) • Equipment & features: • MultiTool function • MultiBend function • Thread forming function with tool breakage monitoring • Surface marking/embossing function • Deburring and roller technology • Tool magazine: Linear, 18 stations Guedpfxjx D Dkls Akysc • Power On hours: 56.566h • Documentation: TruPunch 3000 documentation

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,364 h, laser power: 1,500 W, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details. • Laser Power: 6000 W • Laser Type: CO₂ • Supply Voltage: 400 V / 50 Hz • Connected Load: 109 kVA • Control Voltage: 24 V • Required Fuse Protection: 3 × 160 A • Compressed Air Connection: 7–10 bar • Nitrogen Connection (N₂): 30 bar • Oxygen Connection (O₂): 20 bar Godpfx Ajynlhnokysuc • Working Area (Sheet Format): 3000 × 1500 mm

Condition: good (used), functionality: fully functional, Year of construction: 2000, Max. processing size: 3000 x 1500 mm Infeed width: 3000 mm Cutting capacity for steel: up to 20 mm, stainless steel: 10 mm Overall external dimensions: 9 x 5 x 2 m With Schmalz suction lifter up to 750 kg, year of manufacture 2018 With chain conveyor for waste transport With spare parts Gujdpfx Akezb Uukoyec Disassembly must be carried out by the buyer.

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction Guodpfx Asy D T S Uskyoc - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop

Condition: good (used), functionality: fully functional, Year of construction: 2013, AVAILABLE FROM October 2026 Punching force: 220 kN Laser power in watts: 4000 Travel range - x: 2500 mm Travel range - y: 1250 mm Cutting capacity in structural steel: 8 mm Cutting capacity in stainless steel: 8 mm Cutting capacity in aluminum: 6 mm Workpiece weight: 280 kg Machine weight approx.: 24,000 kg Dimensions: 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Traveling ball-bearing tables - Linear magazine for tool stations and clamping jaws Gjdpfxey Tm Dps Akyouc - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control etc.

Condition: good (used), functionality: fully functional, Year of construction: 2000, Punching force, max.: 220 kN Sheet metal length: 2500 mm Sheet metal width: 1250 mm Laser power in watts: 3000 Sheet metal thickness: 8 mm Max. workpiece weight: 230 kg Machine weight, approx.: 23,000 kg Operating hours: Guodpjy Tl U Hjfx Akyjc - Laser on-time: 87,583 h - Beam on-time: 13,564 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 14,434 h, controller model: Siemens Sinumerik 840D, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Equipment: safety light barrier, TECHNICAL DETAILS Laser power: 4,000 W Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Sheet metal thickness, steel (max.): 20 mm Sheet metal thickness, stainless steel (max.): 15 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D Beam-on hours: 14,434 h Power-on hours: 39,875 h EQUIPMENT Closed machine frame with integrated laser unit Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo-radial blower, mirror telescope Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drives: Maintenance-free three-phase AC servo motors Additional high-dynamic Xp-axis Cutting head quick-change device Gjdpfoy Rk Uyox Akyeuc Laser cutting head with 5" lens and 7.5" lens Cutting gas pressure setting, programmable APC capacitive height control and process control Automatic focus position adjustment AutoLas Plus Laser power control Positioning laser diode HI-LAS high-pressure cutting Fast processing with SprintLAS ContourLAS for producing smaller holes PMS plasma sensor Automatic sheet metal edge detection Programmable power cycles Compressed air cutting PCS Process Control System Microweld Spraying device for safe thick sheet metal processing Automatic shutdown Work area lighting Workshop programming ToPs 100 lite Control: Siemens Sinumerik 840D Open control system based on PC, easy operation, online help, integrated e-shop, diagnostic function, maintenance log, technology data, teleservice Safety equipment: Multi-beam light barriers, beam guidance completely encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring Gedpfxjxmfc Uo Akysuc - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm